VMDK not getting saved by the VCBackup for VMS V7

Similar Questions

• When I try to change the hardware acceleration, I get a message that says "the new settings could not be saved in the registry."

  I tried to play Solitaire on my Dell computer and I get the message to turn on my hardware acceleration.  When I do that, I get the message, "the new settings could not be saved to the registry.  Help!  I have Windows Vista 32-bit Home.  I even installed a new video card driver.

  Hi PennyKnight

  1. What is the number of the model of Dell computer?
  2. you download and install the latest driver on the manufacturer's Web site?

  Method 1:

  I suggest you to use the services of troubleshooting and to check if these help solve problems-

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:

  You can check if there are errors for the display device in Device Manager. Please refer to the below steps.
  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b b.. in Device Manager, look for the device and then right click on the name of the device and go to properties.
  c. now on the general tab, check the status of the device. Let us know the status of the device. Also you can inform an error code with the State.

  I hope this helps.

• SubSkuCommerceItem is not get recorded in the table orders.

  We created a configurablecommerce element and adds subskucommerceitem and placed an order.
  
  It is, subskucommerceitem is not available in the order object in the fulfillmentpipeline formations.
  In one of the formations of fulfillmentpipeline, we did order.getCommerceItems (), which returns configurablecommerceitem. Then the getCommerceItems() on configurablecommerceitem returns null.
  
  On analysis further below, we noticed in the database, which could be the root cause:
  1 DCSPP_ITEM table has two lines for this order, one showing configurablecommerce point, the 2nd subsku.
  
  2 DCSPP_ORDER_ITEM table has an entry in this order, which is the configurablecommerce item id.
  
  I guess that subskucommerce is not getting stored in the descriptor control point.
  
  Also, there is no line in the DCSPP_CONFIG_ITEM table.
  
  Help, please.
  
  Error messages: no error message.
  
  Gopi

  There is code to save and load in normal subSkuCommerceItems save and load pipeline processors. The fact that you see a subsidiary question in dcspp_item means that it has been saved. Expect to see paragraphs in the table of dcspp_order_item because that's only the top-level items. Subtopics should appear in dcspp_item_ci instead.

  It is possible that your question has been registered but not recharged properly. Turn on loggingDebug in LoadCommerceItemObjects should be useful if that's the problem.

  Save this sub-item and loading code depends on the parent wrapper object CommerceItem that implements the CommerceItemContainer interface. If you have a custom CommerceItem implementation that does not implement CommerceItemContainer, which confuse the ootb save and load code. Another possibility is that code loading instantiates the class incorrect wrapper, what might happen if OrderTools is misconfigured.

• When trying to update, I received this message: Firefox 3.6.3 (2).dmg.part could not be saved, because the source file could not be read.

  When trying to download an update, I got all first: "there was any problems searching, download or installation of this update. "Firefox could not be updated because: no data has been received (please try again)" he also gave a link to download manually. When I tried the site in Firefox, I got: 3.6.3 (2).dmg.part /Users/(deleted for privacy)/Desktop/Firefox could not be saved, because the source file could not be read.

  Try again later or contact the server administrator. I tried this 3 times.

  This has happened

  Don't know how many times

  Is around 11:00 central time Mon, 17 May 2010

  This means that the file cannot read because he was interrupted while downloading. Try to download again

• "You are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator.

  XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.

  I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?

  CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v).  I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.

  For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp

  EDIT TO ADD A LINK:

  See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/

• My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router.

  Dialog box of connection Wi - Fi Protected Setup Wizard in the Intel PROSet /Wireless connection utility

  My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router. He let me just plug in numbers not letters. Can someone tell me how to work around this problem?

  Hello

  This can happen if the configuration of the router is configured to accept the password in numbers. You can get in touch with Bigpond support for more information on this.

  Technical assistance to BigPond

• error message "coordinates would not be saved" when the contact info is correct.

  original title: error message

  "contact information could not be saved" when the contact info is correct.  Happens all the time on this computer

  You will need to create a new post on the Windows Live support for assistance site: http://windowslivehelp.com/forums.aspx?forumid=28aff142-9106-4d74-be08-9b5d9fc0efea

• Word 2007 your AutoCorrect, MSO1033.acl, file could not be saved. The file may be read-only, or you do not have permission to modify the file.

  To get this message when opening Word 2007.

  Your AutoCorrect file, (Japanese weird character? with) MSO1033.acl, could not be saved. The file may be read-only, or you do not have permission to modify the file.

  ALSO when I try to close or save a Word 2007 I get this message:

  Word cannot save or create this file. Make sure that the disk you want to save the file on is not full, write-protected, or damaged. (C:\Program Files\... Normal.dotm)

  I then click on Cancel to not save the changes and then get the following message appears:

  Changes have been made that affect the model overall, Normal. You want to save these changes?

  I click No. in addition to this I'm currently not able to print from word 2007 older that I created a few months before this problem started

  I studied that went through all the troubleshooting steps suggested Microsoft to resolve this issue, but have had no luck... any other help or suggestions would be appreciated. I'm not

  Thank you!!
  Frustrated in minutes

  Install the fixit from article KB2258121 (fixit #50461).

  Although this problem is not mentioned in the KB problem, the fixit indeed solves this problem.

• Error "the message could not be sent. "The setting for your outgoing e-mail [SMTP] Server may need to be configured" in Windows Live Mail

  I use Windows Live Mail and it seems to me that they receive an email but I get the following messages and cannot send emails

  The message could not be sent. The setting for your outgoing e-mail [SMTP] Server may need to be configured. To find the server settings for * address email is removed from the privacy *', please contact your e-mail service provider.

  Object "Marriot coverage."
  Server error: 550
  Server response: 550 must be authenticated.
  Server: 'auth.smtp.1and1.co.uk '.
  Windows Live Mail error ID: 0x800CCC79
  Protocol: SMTP
  Port: 587
  Secure (SSL): Yes

  Can someone help me please

  JO

  Original title: Email problems

  Check with your e-mail provider on how the various SMTP (especially the port) settings must be set to confirm that everything is correct. But, take a look at this setting and try to change it if necessary to see if it helps.

  WLMail open

  Right-click on the name of the email account

  Click 'properties '.

  Click the [servers].

  "my server requires authentication" is checked?

  If it is not try to delay it and and see what happens then.

  Note that you may need to click the [Settings] button to enter the necessary info he needed.

• \Lightroom_4_LS11_win_4_4.exe.part could not be saved because the source file could not be read.

  Update 4.1 to 4.4 Lightroom I get this message - LS11_win_4_4.exe.part could not be saved, because the source file could not be read.

  Hello

  Please uninstall Lightroom 4.1 and then download the latest version to install. It should work.

  Kind regards

  Abhijit

• Service request not getting associated with the Contact

  Hello
  
  We have an interface between the Web site of our company and Siebel On demand application, visitors can come to our Web site and submit a request by filling out a form with their contact information and their request. In turn, this creates a folder 'Contact' and a 'Request for Service' in the Application folder,
  
  'Contact', we used WSDL and v2.0 "Request for Service" WSDL as the webservice interface, we find that the Contacts and requests for services are created as that individual records, service demand does not get associated with the contact record is created?
  
  We are capture the following information under the heading "Contact".
  First name:
  First name:
  E-mail:
  Phone:
  Address:
  
  and the following information under the 'Service request'
  Product information:
  Object:
  Description:
  Type:
  Status:
  
  Should the specify us anything else under the Service request in the interface that will associate the Contact and "demand for services.
  
  Is it because in version 2.0, each object exist as separate nodes that we are facing this problem?
  This will be solved by using v1.0, is there a limitation any using v1.0, please specify
  
  You can call me if you need additional information
  
  Thanks and greetings
  Satish Kumar
  + 1-857-869-0239

  Hello

  When you create the Service request, make sure that you set the field "ContactId" so that the created contact is associated with the SR created.

  -John CRMIT

• I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  BabsMKE wrote:

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  settings - do not disturb - off

• Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

  Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

  You have installed the Ghostery add-on or something similar?
  It can block Google analytic and .js file could not be read.

• I do not want to promote the material for your business but I don't know how to do this. Could I be put in contact with the one dealing with promotion of contact microsoft or microsoft studios.

  Dear, that which which may concern,.

  I do not want to promote the material for your business but I don't know how to do this. Could I be put in contact with the one dealing with promotion of contact from microsoft, or microsoft studios, anyone who takes care of the halo franchise.

  Hello

  Microsoft - unsolicited ideas
  http://www.Microsoft.com/en-us/legal/intellectualproperty/copyright/default.aspx#O14

  343 industries manage Halo - check community and forums
  https://www.halowaypoint.com/en-us

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC.

  Original title: upgrade

  I am operating Windows Vista. I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC. Any advice?

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.