VMmark 2.5 Messaging server error (loadgen)

Similar Questions

• Cannot install the program, the error message: Server error 145905 [invalid header] communications failure

  Original title: communication failure 145905 [invalid header]

  When you try to install a program I always get this error each time message: Server error 145905 communication failure [invalid header] would appreciate any help that anyone can provide. Thank you.

  Hello

  That is the application that you are trying to install?

  I suggest you follow these methods and check.

  Method 1: Run the hotfix to correct the following problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Perform the clean boot, try to install application.

  Follow the suggestions of this link.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  If the problem is specific to the program, I suggest you please contact the manufacturer of the program for utilities.
   

  I hope this helps!

• Unable to receive messages, Server error: 080048849.

  Cannot receive messages

  original title: Server error: 080048849

  Hello

  ·         When you receive this error code?

  ·         You receive this error message when you use Windows live mail?

  After my research on the error code that it seems to be related to Windows Live Mail. If the problem is on Windows Live Mail I suggest you to post the question on the link below.

  http://windowslivehelp.com/product.aspx?ProductID=15

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• Dns Windows CE 6.0 and not found error message Server error

  How can I connect to internet through wifi? Get the DNS error error message or cannot find the server, even if the wifi is connected.  No problem with the ethernet connection.

  Hello

  ·         What is the full error message?

  ·         Have you been able to connect via Wifi connection before?

  I suggest you to remove the wireless network and reconfigure it again.

  Step 1:

  (a) click Start and select Control Panel.

  (b) open the network and sharing Center.

  (c) click on manage wireless networks.

  (d) remove all wireless network listed in this list.

  (e) restart and reconnect to the wireless network.

  Step 2: You can uninstall and reinstall the Device Manager wireless network adapter to be a safer side.

  To uninstall the Device Manager wireless network card,

  (a) click Start, type device manager in the search box of start and press ENTER.

  (b) locate the network adapters and expand the same.

  (c) select the wireless connection, right click and choose uninstall.

  (d) restart the computer, if prompted.

  (e) drivers should settle automatically after the computer restarts.

  Now you can install the latest wireless drivers and check if this solves the problem.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Step 3: Reconfigure the wirless network.

  Setting up a wireless network: http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get "Server Error 403-Forbidden: access is denied" message when you try to machine client join in Small Business Server 2011 Essentials

  Hi people,
  I recently deployed a Server SBS 2011 Essentials version in our office. We are very please with everything except for one thing. We have an IBM T42 laptop running Win XP Pro SP3 (fully patched) I can not stick to the server.
  Whenever I type the URL to bring up the software of the connector (http://servername/connect), I get a browser message-"Server Error 403-Forbidden: access is denied." You don't have permissio to view this directory or page using the credentials you provided. »
  I can ping the IP address of the server successfully and can navigate to the shared folders on the server without any problem. I also have two Dell laptops that are running Win7 Pro, and I had no problem to join these to the server/domain.
  Any help would be greatly appreciated!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the TechNet Windows Server Forums. Please post your question in the TechNet forum.

  http://social.technet.Microsoft.com/search/en-us?query=small%20Business%20server%202011&AC=1

• HP Touchpad Server error when setting up of webos?

  My HP Touchpad can settinp up

  For you first, I tried setting to the top of my new touchpad.
  I chose
  English > and
  United status > and
  wifi configuration and choose a > (it has been accepted)
  Apperar display "HP-terms and Conditions.
  then I got an error message
  "Server error".
  Please contact palm.com/support
  to help solve this problem
  "
  How can I solve this problem please

  Thanking you in advance

  The solution was to use webOS Doctor.

  webOS Doctor wiped the touchpad. So then I could installed androis without any problem

  Thank you

• Stopped Creative sync Cloud Server Error

  Hello world

  Since I updated creative cloud I'm unable to sync files. I can upload files, but I'm not able to sync the files download my colleges. As soon as I click 'Start Sync' I get the error message "Server error sync cloud creatives stopped." I can see all the files online, but I would have preferred to be able to sync them to my office.

  Thank you

  Hi Marielle,.

  If you use Windows, try the following steps. Please let me know if you use a Mac and I'll give you appropriate measures.

  1. open the desktop creative cloud application.

  2. click on the icon 'speed' to bring up the menu.

  3. with the menu remains open, hold down the CTRL key.

  4. all holding the control key, choose "exit".

  5. wait a few seconds (about 1 minute).

  6 remove this directory:

  C:\Users\\AppData\Roaming\CoreSync

  7 repeat the creative cloud desktop application.

  Note: The AppData folder is hidden by default. This document explains how to show this folder:

  http://helpx.Adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html

  Please let us know if this does not solve your problem.

  Thank you

  Ben

• Error HTTP 500 - internal server error code

  Hello
  
  Before you start, I google this problem for 2 weeks now, haven't tried many suggestions on the previous forums al Lrevetu no chance. You are my last hope!
  
  Using Dreamweaver 8, SQL server (express edition) win XP pro with IIS, .net 2.0 framework, MDAC2.7
  
  Here's the problem, I have the configuration database everything correctly, cannot access it via the browser etc. no problem.
  
  In dreamweaver 8, I create a new dynamic ASP VB Script page to connect to the same database - Bingo! everything works like a charm.
  
  I then change the site to use ASP.NET VB as a model (because that's what I would like to develpop my app in), create a page ASP.NET VB, go to, click the application Panel the sign etc. + > select OLEDB SQL Server provider.
  
  I choose my server name, choose windows authentication as the connection method and then can see the dabase in the catalogue box and select it. (these are exactly the same parameters as the ASP page that I tested and worked).
  
  I click on the test button, 'Successful Test' fantastic, I think.
  Press ok
  The next window displays the connection string, I add a name for the test connection click and get the error message "Server error internal 500 - Http error code.
  
  If I click ok, and then try and spread my tables of the database = none.
  ________________________________
  I tried the following:
  I don't think that it is a database problem, one I tried with access, MySQL, and SQL server all with the same result.
  ASP works very well - ASP.NET fails. I read on other forums that ASP.NET "remotely" connect on the test server and that is where the problem may reside.
  I copied MMScript directory to the root of my c:\inetpub\www\root\ directory since it was also a suggestion.
  I added the full access of all accounts in this directory (initially after just try IIuser and those normal).
  
  My test server is local, c:\inetpub\wwwroot\pbuyer\
  localhost/pbuyer (not in front of my dw at the mo but can confirm it is set up correctly).
  
  I can only think it is a permissions issue, but as a last resort, I gave permissions for each account in all records to try to resolve the problem. Other posters have reported the Macromedia could not replicate it and therefore could not provide a solution, and all messages on the internet, there is not a solution.
  Reinstall IIS would be an idea of the gaffe?
  
  Would really aprecciate someone post a reply that I hit a brick wall!
  
  
  
  
  
  
  
  
  

  OK - I've fixed.

  For all those who have the same problem (and I know because there are literally thousands of this exact topic in all directions with no resolution) you do the following:

  Go to services to check that all of the ASP.NET services like running, for me:

  ASP.NET State service is set to manual - I clicked on start and Bingo! I can finally access my database.

• Recently went from Outlook Express to Windows Live Mail. Since that time I can't send/receive emails without this message popup Windows live mail ID error 0x800ccc78 Server Error 530.

  Recently went from Outlook Express to Windows Live Mail.  Since that time I can't send/receive emails without this message popup Windows live mail ID error 0x800ccc78 Server Error 530.

  You will need to ask here:

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

  And you need to display an error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread. Just the number of code alone is not enough.

• Error Server - when my computer starts up, I get a message that says "SERVER ERROR ' / ' application" "

  When my computer starts up, I get a message that says "SERVER ERROR ' / ' in the application" I can't recover my desktop computer. " Can someone explain what application ' / ' is?

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
   
  Start the computer in safe mode and check if the problem persists.
   

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://support.Microsoft.com/kb/315222

  
  Reply with answers to help you in a better way.
  
  Hope this information helps.

• Error message States 'A TCP/IP error occurred while trying to send data to the Server Error 0x800ccc13' when try to open Microsoft Outlook 2000.

  Original title: Office of Microsoft Outlook 2000 does not open.

  Error message States "A TCP/IP error occurred while trying to send data to the Server Error 0x800ccc13 #

  Hi John,.

  1. what operating system is installed on your computer?

  2 How long have you been faced with this problem?

  3. don't you make changes on your computer before this problem?

  
  Reference: Outlook 2000 Solution Center

  Please post back and we do know.

• Server error: 0x80072EFE, impossible to send or receive messages from hotmail on windows live

  Can't send or receive messages on behalf of Windows live Hotmail.

  Server error: 0x80072EFE

  Hello

  As you use a Hotmail account, I recommend you contact Hotmail support for assistance.

  For more information, please visit: Windows Live Hotmail: main problems and Support information

  Hope the helps of information.

• The message could not sent, Server error: 550, error number: 0x800CCC79

  The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was ' karen.hall@stationcasinos. com'. Subject 'Thank you!', account: 'pop.west.cox.net', server: 'smtp.west.cox.net', Protocol: SMTP, server response: 550 5.5.0 invalid address, Port: 25, secure (SSL): no, Server error: 550, error number: 0x800CCC79

  The rejected e-mail address was ' karen.hall@stationcasinos. com'.

  You did your email: there should be no space between stationcasinos and com. Go to tools > accounts > {account}, and then click Properties. Check addresses both the general tab and the tab of servers under the username by e-mail.

  It is the main cause of the error. Using the obsolete parameters as noted Bruce can also cause problems.

• When you try to synchronize my Live account I get this message. Server error: 0 x 80048849

  I'm trying to synchronize. My accounts live mail... but these mistakes... some times is working properly and suddenly he stops.and then after I reinstall it because it does not anymore.pls help... I HAV all checked... as I m not to use it for the first time... I tried manually too... but nothing works...
  Can't send or receive messages for the Live (joshivk) account.
  Server error: 0 x 80048849
  Server: 'https://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
  Windows Live Mail error ID: 0 x 80048849
  Thanks in advance for your advice
  Vishal.

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Live and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/

• I got this message when I try to send messages from Windows mail: ERR in syntax Port 110 secure SSL, no, Server error 0 x 800 ccc90, 0 x 800 ccc18 Please help.

  This is the message when I send failed
  ERR syntax in Port 110 SSL Secure, Server error 0 x 800 ccc90, 0 x 800 ccc18

  This problem started a few days ago.  This isn't my main mail center, but I would use it as a back-up.  also if I want to send web links to third parties.  I hope someone can help.

  Where was this 'small' notification? If the message has been diverted to one folder other than the Inbox, it will always show a notification.

  Check your message rules and blocked senders.