VMotion issues with cpu AMD 6276

Similar Questions

• This CPU, AMD Phenom II X 6 1035T, will be compatible with the model p6550z.

  Looking to update proceesor for the model with the amd phenon II x 6 1035 t p6550z.  I want to just make sure that it is compaible...

  Hello

  It is a machine CTO so very difficult to find the full specs on the HP Web sites. Please check this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02250435&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=4162263&prodTypeId=12454

  Kind regards.

• ESX3.5 U2 blue screen with processor AMD daul

  We have a problem with ESX3.5 u2 start with the daul core AMD CPU, when ESX3.5 Initializes the timer, it willreport the error as follows:

  ;----

  ---

  TSC: cpu0:0 4552357591) initialization calendar...

  TSC: cpu0:0 10150276678) Init: VMKernel:718: cpu 0: tsc measured speed 2800112697 Hz, 2800112697 Hz (using TSC) CPU speed, bus speed 200008050 Hz

  Could not find a usable reference clock

  ;----

  ---

  and after Debug us we found, it seems, it cannot initialize the ACPI PM timer and daul AMD processor cannot find the reference count, so it will signal you the error.and qual hearts AMD processor, is not also initialize the ACPI PM timer, but he will refer to the timer with TSC. So, how ESX3.5 u2 detect ACPI PM timer and initialize it? By the FACT of the ACPI table? How ESX3.5 U2 can do qual AMD processor can reference with TSC, why Daul CPU can not?

  and we have another issue with ESX3.5 u2 start when we activated the HPET function, it will report as follows;

  ;----

  ---

  init IO_APIC IRQ

  IO-APIC (apicid-PIN) 2-2, 2-16, 2-17, 2-18, 19 / 2, 2-20, 2-21, 2-22, 2-23 not connected.

  .. TIMER: vector = 0 x 31 pin1 = 0 pin 2 =-1

  .. MP-BIOS bug: 8254 timer connected to IO-APIC

  ... try to put in place the timer (IRQ0) through the 8259... has failed.

  ... try to set up the timer like Virtual Wire IRQ... failed.

  ... try to set up the timer like ExtINT IRQ... unexpected trap IRQ vector 07

  trap unexpected IRQ to the vector 07

  failure: (.)

  Kernel panic: IO-APIC + timer does not work! rant [email protected]

  ;----

  ---

  So, how ESX3.5 U2 to check with these?

  Thank you very much.

  Is what brand/model of server? Is it in the version of ESX 3.5 certified list? What family of AMD processor?

  I got something similar on a whitebox server before where a bunch of stuff from power management enabled (' Quick ' n and calm "or something like that) which distorted speed CPU and timers like her in tray autour CPU running just as fast as necessary. For virtualization, you need all this out...

• Replace the chip AMD A8 with an AMD A10

  HI, I was wondering if anyone had any suggestions on this.  I have a HP: 500-054 with an AMD A8 chip, I want to upgrade an A10.  Power and watts on socket are very good A10 uses the same power and is located in the path of upgrade for the Council of Eric on the 054.

  My problem is that it looks like the factory used a thermal GLUE, instead of a paste.  When I opened the hood and went to remove the fan screws were already in bulk.  Unscrew more just to be sure and tried to remove the fan so I could replace the chip. I checked and recheck and nothing else is holds the fan.

  So any suggestions on getting the fan assemble the CPU socket without damaging the motherboard?  He is stuck in solid and hoped that someone here would have a suggestion.

  I'm not particularly intelligent or gifted. I'm just very, very curious.
  Albert Einstein

  Thanks for the reply, I was upgrade the system to pull the max memory and put it into the higher A-series chip. A problem with the fan by pulling even after be unscrewed it wasn't pulling up if I could have access to the chip.

  Regardless of the factory used as a thermal paste should be defined as super glue.  Shouldn't not concerned by the old A8 chip I replaced it anyway, so I unplugged the fan and run the PC for 15 minutes on a game with the unscrewed and disconnected fan.  Not something that I would normally do, but this has worked to build-up of heat allowed me to wiggle the fan a little and she appeared off the coast.

  Thanks for your reply, the problem is resolved and the new chip Assembly and fan of the A10 is installed and works very well.  Note the A8 chip works well so I tested it on another PC so overheating does no damage.

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN

• iPod Touch 5 Gen - iOS 9.3.1 lightning connector issues - with accessories

  Has anyone seen a problem using iOS 9.3.1 on an iPod Touch 5th generation with lightning connector devices?  Specifically, I use the iPod in a cradle of scanner which connects via the connector of the lightning, until iOS 9.3.1 the cradle was visible to the application, but once it has been updated the scanner loses communication to the iOS device and application.  IPod charge and connect to iTunes, no problem, but refuses to see the cradle, I have another iPod on an older version of iOS, which connects to the cradle even without problem.

  To try to find, I've updated the iOS to 9.3.2 beta fault from the site of the developer, this problem has now fixed the issue with the cradle.  I can't that assume Apple broke the connection in iOS 9.3.1?

  Sometimes an iOS update breaks compatibility with accessories. Since then, he has worked with next beta which seems to be the cause.

  All yo can do is to continue using the beta until the version is rejected in the pubis.

  Have reported the problem to Apple to ensure that the beta version is not yet revised to cause the same problem?

  https://www.Apple.com/feedback/iPodTouch.html

• Need help with the AMD Radeon HD M 8750 + HD 8000 Series Dual Graphics

  I recently bought the 15z-j000 ENVY and updated with the AMD Radeon HD M 8750 + HD 8000 Series Dual Graphics. I wanted the dedicated HD 8750 M for games and whatnot. When I opened first to the top of my new laptop, I did a clean install of Windows 8 from a USB key. This completely erased all of the HP preinstalld drivers, software, etc.

  I installed the beta drivers for my laptop from the site Web of AMD.  Here's my problem. How will I know that my dedicated video card working properly? I ran a few games and they seemed to do as well. But when I checked my system with CPUz and dxdialog it says that I was running the graphics card integrated. How does the dual graphics and how can I make sure I take advantage of my dedicated card. An explanation of the depth and how for the use of the AMD solution dual graphics card would be apprechiated.

  I'm no expert on the switchable graphics, but you find the answers to your questions in the Overview of the switchable graphics or Dual GPU or switchable on portable graphics equipped with double GPUS and AMD.  Be forewarned however, documents were written for the HP PC using the appropriate HP, drivers if you use the Beta from AMD drivers, then documents may not match what you see on your system.

  R

• Pavilion g6: Atheros connection issues with Arris Modem

  Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

  @s_z,

  Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

  Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

  Please let me know how things are going.  Thanks again for posting and have a great day.

• issue with tables and clusters

  Hello

  Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.

  Concerning

  You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.

  This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.

  

  Have fun

  Ben

• problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

  problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

  See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

• HP dv7-1232nr with an AMD Turion x 2 Windows 7. I wanted to speed up

  I have a HP dv7-1232nr with an AMD Turion x 2 Windows 7.  I wanted to speed up and watched the Kinston Digital 120 GB ssdnow v300 sata 3 2.5 it will be compatible?

  Yes, only in the car in the original location will be bootable. Get a second caddy and move the old disk to the secondary housing only for storage/backup.

  If it's the answer please click on accept as Solution to help others find it.

• museums of 15N: what is the maximum ram I can put in Pavilion 15N with processor AMD RADEON

  What is the maximum ram I can put in Pavilion 15N with processor AMD RADEON?

  Hello.

  The capacity is 16 GB maximum supported RAM in this model, you can go ahead and update if you want to.

  In addition, you can take a look at the technical details of your laptop and follow the steps to change the RAM:

  http://h10032.www1.HP.com/CTG/manual/c04402649.PDF

  I hope this helps.

  See you soon!

• Docking station issues with power - power of the outdated USB hub

  We get an outdated 'USB hub power' error on my docking station with an E7440 anchored in it.  Worked fine, since I have received the device, but all of a sudden it-error when I try to access any flash drive.  Swapped out with a new one, number the same dock.  Also swapped power adapter, also with no effect.  Any ideas on the problem or resolution?

  Did you by chance install or upgrade of Citrix Receiver recently?  I did and my USB ports no longer works in the docking station.  This link has Details of why:

  blog.wisefaq.com/.../USB-Power-issues-with-Citrix-Receiver

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• What are the known issues with Bravia HX-925

  Hello

  Please let me know the known issues with the HX - 925 Bravia Full HD 3D TV series.

  Thank you and best regards,

  Arun

  Hi ArunHX925!