Pavilion g6: Atheros connection issues with Arris Modem

Similar Questions

• Laptop Pavilion: help - Qualcomm adapter WIFI Atheros and incompatibility with the modem

  I bought a new laptop and can't seem to connect to WIFI at home and have dealt with many parts to get resolved nothing doesn't. Here is some key information:

  (a) laptop can connect via Ethernet to the modem Vodafone (the model is HG556a)

  (b) laptop can connect outside the House on another WIFI network

  (c) other PC and the device at home working on WIFI

  (d) the WIFI network adapter is Qualcomm Atherros QCA9565 802.1b/g/n

  The laptop detects the network, and I am asked to enter the key and it trys and advise network not available at this time.

  I looked to see if the adapter works fine in Device Manager (and assumed all good). There is no upgrade is recommended

  With advice from HP support I was through many loops, tests, and trials, restart modems, etc., included in the present was check it on the site of HP on the recommended drivers/updates, and downloaded a new driver

  Qualcomm-Atheros QCA9000 adapter, however it is not visible in the device only Manager downloads, not sure how truly "replace" the driver to see if I have better luck.

  Thankful the help of this forum

  The problem is resolved. Got back to my broadband provider and they change the setting of the channel from 11 to 1, and this has solved the problem.

• Issues with the modem with XP Pro after upgrading from xp family

  I upgraded to XP Pro and cannot create a dial-up connection because this option is not available for me. I checked the Microsoft support pages and enabled dial-up as suggested by using regedit.
  Still no difference. So I guess that the modem or the modem settings are the problem. Ive tried to download the driver couldn't get one for xp pro.can someone tell me the necessary driver for xp pro

  In Control Panel, if I go to phone options and modem, I see "Toshiba Software modem AMR COM4" but, if I go into the settings of the Modem in Control Panel, I get the message that the modem is not installed correctly and I have to uninstall and reinstall. I did this several times without success.

  He drives me crazy - can anyone help?

  Hi Mikey,

  as a first step, it would be good to know which model you have.

  Then we can compare it with other models and perhaps a driver XP modem to another model fits!

  For the first time, here is therefore a standard modem installation oder.

  1. check if the modem is entered in the Device Manager
  2. check if the modem is configured and that it works?
  The Control Panel must be open and go to the phone
  options of modems and. It should be your modem!
  If it is not shown to you, then you must install the
  modem driver.
  3. double-click on modem and go to the Diagnostics. The
  modem query button queries the commandments with
  check the return signal. This will give you some additional information
  the modem works properly.
  4. then set up a standard dial-up connection to your
  provider of
  5. go in the properties of the modem (Device Manager) and the
  Check the brand in the "wait for dial tone before dialing" has NO
  been resolved!

  You can try!

  Pete Bye

• Connectivity issues with Satellite L30-101 wireless

  I live in a room where the wireless NET is low.

  The landlord lives just next door and it has wireless internet access, I pay for it as well.

  I have a toshiba satellite laptop L30-101. my room is on the first floor, if I get out of my room in the hallway, the net improves.
  If I go down this is the best.
  I tried to speak with the owner to put the modem near the window or connect an antenna in the modem, but there is no change.
  Here's my question: How can I get a net better from my room?
  What can I buy for my computer? I have a type II card slot. What type of antenna, cables or cards can I buy?

  Hey Bela

  Why don't you talk with your local dealer where you live. They can give you enough useful information how to manage this problem. If you wish, you can test connectivity with the latest PCMCIA WLAN cards. If there is no success you can send it back after a few days.

  .

• Connection issues with WPA on Windows XP Home SP3 Netbook

  Finished just set up (after the failure of the HD) a Samsnung NC10 netbook.

  While I am able to get it connected to my i'net connection using WPA2 - PSK, when I re - locate in my house of customers problems start to occur.

  They have what appears to be an old Netgear wireless router, which is set up for WPA.

  When the Netbook is trying to connect to the router, it seems to get stüch acquire an IP # (so I'm starting to think that it might be associated with DHCP).

  Any ideas on what could be the cause of the problem and how to solve.   Or it'll just be a case of re - configure the router to use WPA2?

  Set a static IP address does not help... If the adapter cannot get an IP address from the DHCP server on the router then (assuming that no hardware is broken) is not making a connection authenticated, so no matter you set IP.

  If you have access to the router instead of your customer, temporarily disable any encryption of the Netgear router, remove any entry associated with this router in the list of preferred networks (as described above) and see if it will connect without encryption.

  Which should reduce things a bit.

  One thing that comes to mind is, particularly when the old wireless devices are involved, you may need to configure the encryption algorithm correct in addition to authentication wireless system.  In other words, if you select WPA, you also choose to use AES and TKIP (the former algorithm).  It's on the tab "Association" wireless network properties.

  You should check the router to see what he uses before you configure the properties of the adapter.

  This screenshot, WPA2 is used, which involves AES encryption: http://www.okcu.edu/technology/wireless/xpwifi-WirelessNetworkAssociation.jpg

  This screenshot, WPA with TKIP is used: http://t1.gstatic.com/images?q=tbn:ANd9GcRG3JX7mOYrv7NwyGeN5BD7KxggPJXlI6u1t7jf2kh3YZSU76EXEA

  Some routers that have been built as WPA2 introduced had a kind of quasi-WPA2, which has been implemented in the WPA with AES.  I would have thought that your card would automatically detect and use the algorithm correct when you set to use WPA - PSK, but maybe not.

• Connectivity issues with hp deskjet 3070 wireless - works in wired, not wireless

  Please can someone help me with this - I have installed the software very well on my mac, but as soon as I unplug the printer, it will not work wireless.

  The report wireless seems to be perfect, but the printer persistently refuses to be connected wireless

  Any help much appreciated.

  OK, great.  It seems that the printer is connected to the airport, which is a good start.

  Restart the airport by pulling on its power supply momentarily Plug and let it restart as a green light.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Connectivity issues with 11g Express Edition on Windows 7 Professional 64-bit

  Hello

  I uninstalled my version 10g Express Edition and proceeded with the installation of the 11g version.  I can connect to sqlplus, but when I try to open the web application in DB (apex), I can not.

  The clsc.log file contains the following error:

  Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.

  2015-01-08 - 19:55:52.286: [41100] [default] ut_read_reg:2:ocr SOFTWARE\Oracle\olr registry key cannot be opened. error 2

  [DESTROYED] clse_get_crs_home [41100]: error recovery configuration OLR [0] [error opening of the olr registry key. The system cannot find the specified file.

  ]

  I've uninstalled and reinstalled twice with the same results.  Everyone knows what is happening?

  Any help is greatly appreciated.

  This kind of things ODE was a Kipper.  The problem was that installation configures the listener with the domain name in the HOST, but the URL for the IP address of the apex uses localhost.  I changed the listener HOST localhost, rebooted, and now all is well

• HP Pavilion g7-2298nr Notebook: issue with HP Support Assistant Info

  When I checked to see what messages HP Support Assistant inportant was for me. I received a notice from the HP support

  Assistant that my protection against viruses and spyware were not working.  It shows that they are both off the coast.  I have Trend Micro Anti

  Virus and this shows to work properly.  I also use Anti Malware. Is there something that is incorrect?  Is there a way to

  me to remove the messages from the HP Support Assistant? Thanks for any help.

  Paul

  Hello doowop47,

  It may be a glitch in the wizard for help. I know that this kind of thing happened often a few years back with other brands of anti-virus. This was due to the fact that the HP Support Assistant only worked with precision with Norton. It may still be the case today.

  The Support Assistant runs automatically at startup? If so, you can turn it off and it won't hurt anything. It can be turned on again since the program Panel.

  Here is a link showing another Expert HP explaining how to disable the wizard.

  Re: HP Support Assistant - how to disable start up / re-HP - 2464017 Support Forum

  I know that this does not resolve the warning itself, but it is not entirely uncommon to happen.

  I guess the support Wizard is also updated.

• HP Pavilion G6: Wireless connection slow

  Hello

  Given that I update to windows 10 my wireless connection is slower.

  Test on speedtest.net in my house, dowload speed is at best 1, 5mbps and download 2.5 Mbps (which is strange uploading faster than downloading) and at the same time my other laptop Acer becomes 7, 5mbps download and the same 2.5 Mbit/s in upload. In my house, I have a service of the internet 3G / 4G.

  Hi @miguelsoare,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook g6 and issues with slow wireless speeds. Here is a link for troubleshooting wireless connection, if you need.

  If the problem persists, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels. Sometimes, this fixes the speeds.

  Some say that it helps to fix this Microsoft Fix it.

  Here is a link to help as well.

  Please let me know how it goes.

  Thank you.

• Windows WiFi 8 HP 2000-2b43dx guard abandon the Qualcomm-Atheros connection

  I just got a laptop HP 2000-2b43dx last month and had no problem with the connection before fall, but here for the past week or so she did it a lot. It starts to get boring, that's why I'm here.

  If I close my laptop and open it again it will be disconnected and I have to reconnect manually even if I have the settings in automatic mode.
  And every now and then it disconnects randomly, and I have to reconnect again. It's really annoying when you try to play a game and you get kicked out of a game because of that.

  I've updated the network driver and the only thing that helped was able to reconnect faster...
  My old laptop has never had this problem and it only recently started to do a few weeks back.

  I have an AR9485 of Qualcomm Atheros 802.11b/g/n WiFi Adapter.

  Can anyone help?

  Sorry... I forgot to post the thread I referenced.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking-e-g-Windows-8/Atheros-WLAN-driver-fixes-connection-issues-with-many-new/TD-p/701407

• Pavilion G6-2210sa: SSD issues

  I bought a new Samsung Evo 850 500 GB SSD for my G6.

  It cannot be seen by G6 via Usb 3 icybox external enclosure!

  Then I put in the Machine and ran directly recovery disks to it via DVD drive, everything was going well until reboot and returned G6 03F0 error in the Bios, he could not see the player and says no operating system on drive iunstalled.

  I put the SSD drive in my old laptop DM1 - immediately, he began to set up the computer. So the G6 had written in it!

  Since I formatted and installed Windows 8 on the drive to the DM1 and the SSDS works very well!

  I want it in G6!

  G6 do not see what I'm doing!

  I have the last F26 in the Bios but u lock bios down so I do not see what is happening! When I do a pre boot drive check returnes success at all levels.

  I have worked in it and have continued since then as a hobby for over 30 years now so im no novice!

  Help, please!

  Hi @SteveDB

  Thank you for visiting the Forums HP's Support and welcome. I read on your g6-2210 HP Pavilion laptop and having issues with the new SSD. You can reset the BIOS withthis document by selecting the reload the default BIOS settings. This will get to take a look for the new SSD.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Here is a link toyour manual. If you need it.

  I hope this helps.

  Thank you.

• My laptop is connected to a Modem wireless with full signal but the modem is having "of connectivity issues.

  I tried the usual unplug the Modem and rebooting. However, all other computers in the House are connected to the same modem and all is well and they are connecting to the internet with no problems. Solutions?

  Thanks, looking a bit around and found that many people had the same problem due to an update to McAfee four days ago. So I restored just the laptop to before this date, and the back, everything works well.

• Connection problems with atheros ar9002wb-1ng

  I have 2 computers laptop toshiba satellite.  I just updated my router to Belkin ac1200 wireless router.  I'm having connection problems with my satellite l750, with atheros ar9002wb-1ng wireless network adapter - keeps disconnecting with a signal strength low however the other satellite I with a realtek rtl8188ce wireless lan has an excellent signal strength and works very well - how to fix this?   I'm not very techno so easy instructions please.  Thank you.

  Hi Jak,

  Welcome to Microsoft communities.

  I understand that the wireless connection is disconnected.

  1. don't you make recent changes that caused the problem?
  2. any message/error code?

  Try the steps in the following methods and check the status of the issue.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Configure the computer to clean start State to check software conflicts and check the status.
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the article mentioned above.

  Method 3:

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• Connectivity problem - problem with the modem or the router of network

  I had a network with 2 computers.  The main computer was a Windows XP operating system and the secondary is a Windows Vista operating system.  There was a modem connection and the router. Due to a storm and a leak in my ceiling in my main computer got wet and I couldn't use it.  I have connected the modem without the router directly to the secondary computer, but it is not recognize the modem.  "Internet Explorer cannot display the webpage." So I ran the diagnostics and received a message that there could be a problem with the modem or the network router.  I did the thing 'ipconfig' and there is no gateway.  Is there anything I should do to make this secondary computer main computer?

  Hello

  If you use a router there is no primary and secondary, all the computers connected to the router are equal.

  Many Internet service providers allow you to control some form of autehtication (ID, PW) online journal.

  Your router and the computer humid probably were installed to authenticate.

  If the router does not use it.

  Otherwise, contact your ISP and ask for the help of authentication.

  Jack MVP-networking. EZLAN.NET

• VPN connection with external modem

  Cisco 2651XM router

  using a wic adsl card I was able to establish a vpn connection from a computer on to my 2651xm router cisco vpn client successfully, but I can't get a connection using an external modem.

  My local network at the end of the vpn server is on 172.16.1.xx and goes into the router on f0/0, which stood at 172.16.1.30.

  Port f0/1 is 192.168.1.100 and goes to an external modem set as default gateway

  192.169.1.254. with this configuration I can surf the internet on the computers in the lan at the server end.

  Problem is that I can't get a connection from a remote machine VPN connect. It worked when I used the wic adsl connection, but then I used only

  the port of f0/0 that was connected to my local network. But now I'm including the f0/1 port to connect to an external modem, vpn client cannot connect. The cisco vpn client tries to connect by using tcp on port 10000 and I have to configure it in the modem, but do not know if I did it correctly. I tried to transmit the port both 192.168.1.100 (f0/1) and 172.16.1.30 (f0/0), but neither will not work. My config running is attached. Thanks for the pointers.

  ----------------------

  #show running-config router

  Building configuration...

  Current configuration: 2757 bytes

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  vpn hostname

  !

  boot-start-marker

  boot-end-marker

  !

  no set record in buffered memory

  no console logging

  enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  activate the password xxxxxxxxxxx

  !

  AAA new-model

  !

  !

  AAA authentication login default local

  AAA authentication login sdm_vpn_xauth_ml_1 local

  AAA authentication login sdm_vpn_xauth_ml_2 local

  AAA authorization sdm_vpn_group_ml_1 LAN

  AAA authorization sdm_vpn_group_ml_2 LAN

  !

  AAA - the id of the joint session

  !

  resources policy

  !

  no location network-clock-participate 1

  No network-clock-participate wic 0

  IP cef

  !

  !

  !

  !

  name-server IP 192.168.1.254

  name-server IP 192.168.1.255

  IP ddns update method sdm_ddns1

  DDNS both

  !

  !

  !

  !

  !

  username secret xxxxxxxxxxx 5 xxxxxxxxxxxxxxxxxxxxxxxxxx

  !

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group workgroup

  vpnkey key

  pool SDM_POOL_2

  ISAKMP crypto sdm-ike-profile-1 profile

  match of group identity working group

  client authentication list sdm_vpn_xauth_ml_2

  ISAKMP authorization list sdm_vpn_group_ml_2

  client configuration address respond

  virtual-model 2

  !

  !

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac

  !

  Profile of crypto ipsec SDM_Profile1

  game of transformation-ESP-3DES-SHA1

  isakmp-profile sdm-ike-profile-1 game

  !

  !

  !

  !

  !

  ATM0/0 interface

  no ip address

  Shutdown

  No atm ilmi-keepalive

  DSL-automatic operation mode

  !

  interface FastEthernet0/0

  IP 172.16.1.30 255.255.0.0

  IP nat inside

  IP virtual-reassembly

  automatic speed

  Half duplex

  No mop enabled

  !

  interface FastEthernet0/1

  Description $ETH - WAN$

  updated client dns IP dhcp-server no

  IP ddns update hostname vpn.vpn

  IP ddns update sdm_ddns1

  dhcp customer_id FastEthernet0/1 IP address

  NAT outside IP

  IP virtual-reassembly

  automatic duplex

  automatic speed

  !

  tunnel type of interface virtual-Template2

  IP unnumbered FastEthernet0/1

  ipv4 ipsec tunnel mode

  Tunnel SDM_Profile1 ipsec protection profile

  !

  router RIP

  version 2

  network 172.16.0.0

  network 192.168.1.0

  No Auto-resume

  !

  local IP 192.168.1.110 SDM_POOL_1 pool 192.168.1.120

  local IP SDM_POOL_2 172.16.1.21 pool 172.16.1.29

  !

  !

  IP http server

  no ip http secure server

  IP nat inside source list 3 interface FastEthernet0/1 overload

  !

  Remark SDM_ACL category of access list 1 = 2

  access-list 1 permit 172.16.0.0 0.0.255.255

  Note access-list 2 = 2 SDM_ACL category

  access-list 2 allow to 192.168.1.0 0.0.0.255

  Remark SDM_ACL category from the list to access 3 = 2

  access-list 3 permit 172.16.0.0 0.0.255.255

  !

  !

  !

  !

  control plan

  !

  !

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  password: xxxxxxxx

  !

  !

  end

  Hello

  On the ADSL Modem, you must before 500, port 4500 UDP and 10,000 to the IP address of the router.

  Basically, tell you the Modem to 192.168.1.100 transmitting any packet received on 192.169.1.254.

  On the client VPN choose encapsulation UDP NAT, make use of NAT - T standard.

  Please rate if this helped.

  Kind regards

  Daniel