VMware Atlanta user group the agenda?
I see the agenda of the time, but to be able to rationalize the cutting of a whole day out I need more information about what actually happens to be presented and discussed. "Cisco and VMware" does not cut. I sent an email requesting more information, but got no response.
Is there anyone out there reading this who can give me more information or at least put me in touch with the right people?
Cisco will discuss their Unified Computing Platform and their VMware optimizations. This will be a 90 minute presentation.
Intel will also improve the efficiency of data centers.
If you have any other questions, please let me know.
Best regards... Bruce
Tags: VMware
Similar Questions
-
Me locked out of my user group, the Aministrator leaves me not in
I have Windows 2000 on my computer that has an administrator, I had someone come and they tried to get on my internet so I set a password here and didn't know what to do would be to lock me up. Can I still use my password, but it doesn't allow me to do updates, download my photos. my camera or something. I can't the Aministrator for me to come back in the users group as if I was before I put the password. I NEED HELP! Before the Aministrator connected and I had total access. How can I get that back? I tried over a month, I'm tired! PLEASE HELP ME! Thank you, Alice
Hello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/categories/
-
Add the user to the users group in the Users.ini file using c#
Hello
Using a c# application, we strive to add/remove a user from the TestStand Users.ini file.
The CreateDeleteUsers.seq file in the samples of TestStand is used as a reference.
We have seen that we are able to add the user to the list of user help file
engine. UsersFile.UserList.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());
However, when we try to add the user to the user group, the sample file CreateDeleteUsers.seq said
RunState.Engine.GetUserGroup (Locals.GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, Locals.User.AsUser.LoginName)
If we try to replicate this in c#, the API seeks the last parameter (which is LoginName in the CreateDeleteUsers.seq file) as an object of property
engine. GetUserGroup (this.) GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());
This causes an exception of object reference when we run the application.
Please advise on how to proceed.
Thank you
Arun-
The members property is an array of string, so the 3rd parameter to SetPropertyObjectByOffset requires a string property object, IE. the user name and not of the user object. From the will of the user object error with '-17308; Specified value is not the expected type. ». The example should really be using SetValStringByOffset to be clearer so that you only specify the user name of the actual string.
-
Join us for the Q2 2009 Minneapolis area VMware Users Group meeting-5th edition Forum
Join us for the Q2 2009 Minneapolis area VMware Users Group meeting-5th edition Forum
Jason Boche, head of Minneapolis area VMUG - Email: [email protected]
Thursday 28, may 2009 04:00 - 18:00
04:00-04:30 General Affairs, open floor discussion
04:30-05:00 presentation: Bill Oyler, St. cross Solutions: "ISCSI and NFS extreme Performance Tuning»
Break from 05:00 - 05:15
05:15:05: 45 presentation: Bill Oyler, St. cross Solutions: "Top 10 new features of vSphere/ESX4".
05:45-06:00 Q & A, prizes, closing
06:00-07:00 St. Croix Solutions Happy Hour to the 'Local' (931 Nicollet Mall, Minneapolis, MN 55402 612-904-1000)
Stick around to win prizes from the gate of St. cross Solutions, technology dynamics and VMware.
(Please bring business cards to enter your name in the prize drawings)
Sponsors of the meeting:
Location and snacks provided by St. cross Solutions
• http://www.stcroixsolutions.com/ -Providing innovative, cost-effective and easy to manage COMPUTER solutions
Prizes provided by St. Croix Solutions, dynamic Technologies and VMware
• http://www.stcroixsolutions.com/ -Providing innovative, cost-effective and easy to manage COMPUTER solutions
• http://www.vibrant.com/ -Provide Technology Solutions around the world
• http://www.VMware.com/ -Virtualization Solution more innovative on the planet never
Geographical area:
Minneapolis Convention Center (room 205AB)
1301, 2nd Avenue South
Minneapolis, Minnesota 55343 USA
Phone: 612-335-6000
VMware User Group Event Registration (registration coming soon):
http://www.VMware.com/resources/communities/usergroup/events.html
Join VMware User Group (subscribe):
http://info.VMware.com/forms/UserGroupSubscribe?session=Minneapolis
Jason Boche, vExpert [i] [/ i][boche.net - VMware virtualization evangelist | ] [ http://www.boche.net/blog/] [/i ]
[VMware communities user moderator | ] [ http://www.vmware.com/communities/content/community_terms/] [/i ]
[Minneapolis area VMware User Group Leader | ] [ http://communities.vmware.com/community/vmug/us-central/minneapolis] [/i ]
Beautifully chiselled to so with the Forum of virtualization in the same place, intentionally no doubt. Well done!
-
Looking to get involved with VMware User Group to MD to share ideas? Where should I go?
Hello, I'm new to the VMworld and would like some ideas through a next meeting of the user group and get a chance to share with others. Someone in the MD area can tell me where to go to register?
Thank you - dwagner217
dwagner217,
You can register for any number of VMware user groups. We have two in our region; MD and DC and Philadelphia isn't far away. You can register for the locations you want to here: http://www.vmware.com/communities/content/vmug/localgroups.html
Since you have an account, you can ask questions in the discussions MDVMUG tab, do not hesitate to ask questions and I hope that we can find the answers.
Dan
-
Required link that support it, upload, Tsinternet user group manager and the NNTP service is not longer involved in windows server 2008
Hi HP_990,
I would suggest to repost your question in our forums Windows Server TechNet here:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer
Thank you!
-
remove the domain to a domain computer users group
I have installed a computer in the field and that you wanted everyone to sign on the computer. Our policy has changed and now we only want one user to be able to log on to the machine side comes from the admin I've added to the domain to this machine users group after adding it to the domain. How can I remove the domain users of a machine group already in the field, and I don't see the group in the list?
Thank you in advance,
John C Owen
In General, people who can connect to a machine (and are not administrators) are members of the group "users". As an administrator, if bring you up a prompt window commands on this computer (start-> Run-> "cmd") and enter the command:
net localgroup users
you will see the members of the group "users". One of the entries will probably be:
mydomain\domain users
where 'mydomain' is the name of your domain.
All you need to do is remove "domain users" group. From a command prompt:
net localgroup "user mydomain\domain" / delete
Check other groups (power users, etc.) and make sure that "domain users" are not listed in groups either. You can then add your unique user in the users"" group.
net localgroup users "mydomain\singleuser" / Add
HTH,
JW
-
I have a Windows Server 2008 R2 domain and a Windows XP Pro workstation that has been attached to the domain and then disconnected. I am trying to create a VBS script to add a domain user to the local Administrators group.
I log on my computer as a local administrator and run the following script:
Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
StrPC Dim: strPC = oNetwork.ComputerName
Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
Dim OUser: Set oUser = GetObject ("WinNT://domainname/username")
oGroup.Add (oUser.ADsPath)This script returns the error "the network path is not found."
However, I am able to go into control panel > user accounts > enter the user name and the domain name > click Next... > choose the administrators of the 'other' group and the user name will be added to the local Admin group.
The same script runs without error if it is launched after logon on the workstation with a domain administrator account.
How can I get my script runs without error, when you are logged into the workstation as a local administrator?
Best regards, Andy
The code that I used came from here. If the syntax of the Add method is passed to oUser.ADsPAth to "WinNT: / /" & domainname & "/" & username, the script works correctly.
Therefore, the modified script:
Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
StrPC Dim: strPC = oNetwork.ComputerName
Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
Dim strUser: strUser = "WinNT://domainname/username."
oGroup.Add strUserThanks to Qasim Zaidi to show the code of work here.
Best regards, Andy
-
WinXP
user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is adminI did a gpupdate/force and restart twice PC
Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all usersHi elena_ad,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:
http://social.technet.Microsoft.com/forums/en/winserverManagement/threads
-
AAA RADIUS authentication for the only user group
Hello
I use ACS3.1 and tries to use authentication radius for all network switches in my company.
Meet the im problem now is how to restrict only a user group to access the connection/exec switches? It seems that all user IDS in my acs able to telnet (user access) to the switch (using their login credentials).
I would like to limit still from telnet by using their ID except administrator group.
Counsel on how this is possible.
TKS!
The GBA, you need admin users in their own ACS group separated, leaving other users in their own group also.
Change the group that contains the users you don't want to give access to and under the heading of restricted access network (OAN), in "Group defined Network Access Restrictions", check the "Define based on IP access restrictions", choose "Rejected the call point" and enter switches in the table below (put a * in the port and address).
This prevents standard users authentication to switches. You can add all your switches in a group of network devices (NDG) to this, then you have to add that, in the section NAR rather than adding each switch individually.
-
ACS 4.1 engine lists NT but not the NT users groups
Hello
I have the following problem. I can access using remote agent Win NT ad groups but the GBA engine does not list users in groups after ACS group mapping. What could be the problem?
AD runs on Win 2 K sp4.
Hello
ACS does not list the user in the groups until you do 1st authentication with this user.
Then ACS will list the user as a user "mapped Dynamics" in this group.
Concerning
Rohit Chopra
-
Windows 7 Pro 64 bit (and 32-bit) Setup on the domain.The domain users group is added to the local Administrators group.Printers are installed under the first domain user. These aren't the printers shared, but local usb printers or printers attached to the tcpip port and driver installed.All right.Users in the second domain is connected to the computer. They are part of the local Administrators group, because they are part of the domain users group.They're going to look at the properties of the printer and almost everything is grayed out.Why? Because they are part of the local Administrators group, they should not have full access?I look at security for printers and I don't see the first person in the list because it was created with their profile, but I also see local administrators that this new user belongs to a group. Now I can take everyone and increase the rights and then log in as a new person and they can then change the properties, but why can't new users "who are admins the" does not alter the properties?Thanks in advance for your help.
Hi Gsaunders,
If the computer is connected to the domain network then the question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
It will be useful.
-
ISE / Active Directory: question to get the users group
Hello
There is a strange problem:
-Patch 1.2 ISE 8
-No WLC, autonomous AP
In authentication, we check wireless IEEE 802.11 (RADIUS) and cisco-av-pair (ssid), then we use AD.
We have 3 SSID, so 3 rules, a GIVEN, one INVITED, one for the INTERNET.
In a settlement more than grant permission of APs to save to WDS authentication: user in the local database.
In the authorization, we check cisco-av-pair (ssid) and the Group of users AD, then we allow access.
(so 3 rules) and a more to allow the basic internal for WDS.
We have something strange:
-Sometimes users can connect, but later they can't: the newspaper permission rejects the user because the ad group is not seen.
Example:
1 OK:
Details of authentication
Timestamp of source 2014-05-15 11:43:19.064 Receipt of timestamp 2014-05-15 11:43:19.065 Policy Server RADIUS Event 5200 successful authentication All user GROUPS are observed:
fake AD ExternalGroups XX/users/admexch AD ExternalGroups XX/users/glkdp AD ExternalGroups x/users/gl journal writing AD ExternalGroups XX/users/pcanywhere AD ExternalGroups XX/users/wifidata AD ExternalGroups XX/computer/campus/recipients/aa computer AD ExternalGroups XX/computer/campus/recipients/aa business and cited AD ExternalGroups campus of XX/computer/campus/recipients/aa AD ExternalGroups XX/users/aiga_creches AD ExternalGroups XX/users/domain admins AD ExternalGroups XX/users/used. the domain AD ExternalGroups XX/users/replication group does the rodc password is denied AD ExternalGroups XX/microsoft exchange security groups/exchange view only administrators AD ExternalGroups Directors of XX/microsoft exchange security groups Exchange public folders AD ExternalGroups XX/users/certsvc_dcom_access AD ExternalGroups XX/builtin/Administrators AD ExternalGroups XX/builtin/users AD ExternalGroups XX/builtin/account operators AD ExternalGroups XX/builtin/server operators AD ExternalGroups distance of XX/builtin/users of the office to AD ExternalGroups XX/builtin/access dcom certificate service RADIUS user name xx\cennelin IP address of the device 172.25.2.87 Called-Station-ID 00: 3A: 98:A5:3E:20 CiscoAVPair SSID = CAMPUS SSID campus of 2 NO OK no later than:
Details of authentication
Timestamp of source 2014-05-15 16:17:35.69 Receipt of timestamp 2014-05-15 16:17:35.69 Policy Server RADIUS Event Endpoint 5434 conducted several failed authentications of the same scenario Reason for failure 15039 rejected by authorization profile Resolution Authorization with the attribute ACCESS_REJECT profile was chosen due to the corresponding authorization rule. Check the appropriate rule political authorization results. First cause Selected authorization profile contains ACCESS_REJECT attribute
.../...
Only 3 user groups are observed:
Other attributes
ConfigVersionId 5 Port of the device 1645 DestinationPort 1812 RadiusPacketType AccessRequest Username host/xxxxxxxxxxxx Protocol RADIUS NAS-IP-Address 172.25.2.80 NAS-Port 51517 Framed-MTU 1400 State 37CPMSessionID = b0140a6f0000C2E15374CC7F; 32SessionID = RADIUS/189518899/49890; Cisco-nas-port 51517 IsEndpointInRejectMode fake AcsSessionID RADIUS/189518899/49890 DetailedInfo Successful authentication SelectedAuthenticationIdentityStores CDs DomaineAD XXXXXXXXXXX AuthorizationPolicyMatchedRule By default CPMSessionID b0140a6f0000C2E15374CC7F EndPointMACAddress 00-xxxxxxxxxxxx ISEPolicySetName By default AllowedProtocolMatchedRule CDM-PC-PEAP IdentitySelectionMatchedRule By default HostIdentityGroup Endpoint identity groups: profile: workstation Model name Cisco Location Location #All locations #Site - CDM Type of device Device Type #All type #Cisco - terminals IdentityAccessRestricted fake AD ExternalGroups XX/users/computers in the domain AD ExternalGroups XX/users/certsvc_dcom_access AD ExternalGroups XX/builtin/access dcom certificate service Called-Station-ID 54:75:D0:DC:5 B: 7 C CiscoAVPair SSID = CAMPUS If you have an idea, thank you very much,
Kind regards
Eventually, the AD he loses connectivity with ISE
-
Home page by default for OBIEE 11 g based on the users and the wise group
Hi all
I'm using OBIEE 11 g.
I need set the page default dashboard for the user and the wise group.
EX:
User1 is belongs to Group1 and Role1 - they need to see the default homepage as Dashboard1.
User2 is belongs to the Group 2 and Role2 - they need to see the default homepage as Dashboard2.
Kindly guide me to achieve.
Please answer as soon as POSSIBLE.
Thanks in advance.
It is generally considered poor form to scream as soon as POSSIBLE to a question. http://www.CatB.org/ESR/FAQs/smart-questions.html
As far as your question goes, it is that the CHEMINPORTAIL variable is for:
http://docs.Oracle.com/CD/E23943_01/bi.1111/e10540/variables.htm#i1013436
-
OID 11.1.1.6 - belonging to the user group management
Dear,
Is there a way of OIDS to manage the users, via a specific user attribute group membership?
You all know that in AD for example, it is an attribute of the user "memberof" that could be used for this purpose I tried looking in OID for a similar attribute and actually found this a "orclMemberOf", however I can't figure out exactly how to use it. I tried editing through DOHAD, but got an error "constraint violation". I also tried to use ldapsearch as mentioned in this post Oracle Fusion Middleware security: group membership Fast searches within the OID with the attribute of orclMemberOf, but the attribute is not returned in the search results.
Any ideas... ? We just want to know if the only way to manage the belonging to a group is done using the attribute 'uniquemember' of the group, or if it can be configured on the user object.
Thank you
White
That can only means that is not your attribute to multiple values of the group.
The default value for the OID, groups have an objectclass of groupOfUniqueNames and their membership multi value attribute is uniqueuniquemember.
So lets say, you want to know the groups the admin account is a member, your application would be as follows:
(uniqueMember = cn = orcladmin, cn = Users, dc is sampledomain, dc = com)
This would release all memberships that belongs to the user.
-Kevin
Maybe you are looking for
-
Behavior of toolbar button broken in WYSIWYG in the latest version of Firefox desktop
We use a WYSIWYG editor for adding and editing the content of some Web sites that support us. With the latest update of Firefox, toolbar buttons to clean up the contents of the Clipboard as RTF or plain in gray text when the cursor is placed inside t
-
Yosemite (or El Capitan) there the 'Night Shift' have that iOS has?
If this isn't the case, it is planned? Are there alternatives? So then what?
-
How can I make smaller screensize. Right now, it shows only about 1/2 page
-
Password forgotten on old Tecra 510CDT
I hope someone can help out me. I have an old Tecra 510CDT and you have forgotten the password. The system starts and past by memory to initialize the screen then request a password that i have forgotten. Is there a way to get around this?I hope some
-
HP laptop Pavilion 17-e040us - Possible fan problem
Hi all. I think I have a fan problem. The fan seems to run all the time... at least for the past 3 or raining days, but not fort, with air alternating hot and cold, of the events. I looked at the events surrounding the outside of the computer and