VMware certified Design Expert, 5 - VTC - Question Design Review

Similar Questions

• VMware certified design and Installation

  Hello

  We are installing our ESX environment. A total of 20 ESX servers on both sites. We have hired a consulting firm to help us with the design and implementation of the portions as well regarding cross training purpuses. I took the course of Fasttrak VM and have passed my VCP.

  Now we have a second firm that wants to "certify VMware" our design and install it. I think what they aer full of it... But is it fair to make sure such a thing of VMware Certified Installation or design or anything remotely close to this?

  Your opinions are appreciated.

  VMware offers a class of plan design that offer the way to VMware, to a design - also themselves and through VMware consultants approved offers a number of commitments of short style that will analyze your design - but by one of these that he don't is not something "VMware certified" design as far as I know - in terms of VMware certification has just announced a new certification above the VCP called VMware Certified Design Expert - but they are always roll the pieces that will allow someone receiving this cert.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Design reviews - DCD / CID

  How to prepare the design reviews, DCD or CID?

  Reading plan are sufficient or design experience reqd?

  If a partner is not an exhibition of design in real time, then how this type of review of the nails?

  Also how to answer exam design elements?

  I would like to know the entries of the community that would be useful?

  -Serge

  Hello

  Go to your statement of notes and then down to class and under the course there is a link for the next steps

  

  Completed designs are under there

  Gregg

• To hold the certification vmware certified advanced course is necessary? What pre applicant?

  To hold the certification vmware certified advanced course is necessary? What pre applicant?

  
  
  ________________________________

  Thiago Rodrigues | Network management

  Associate. [email protected]

  Mobile: (011) 6122-0994

  www.DIGISYSTEM.com.br

  Engine certified Manager

  Certified Itil v2 Foundation

  ________________________________

  Minimum is to be SECURE, after that you can go without any course.

  http://www.VMware.com/go/VCAP

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• VMware Certified Advanced Professional – Datacenter administrator

  Hi all

  I don't know if this is the right place to post the query about the review of the secure Channel.

  I just finished VCP - 410. Now, I want to go forward with VMware Certified Advanced Professional – Datacenter administrator. Because this review is 100% lab. Can I have a review of the practice / practice of lab vmware link or any other link? What are the fees the same thing?

  Thank you and best regards,

  Selim Desai

  VCP-410

  Take a look at this site:

  http://www.vfail.NET/VCAP-DCA/

  If this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

• VMware vSphere: install, configure, manage [V5.1] correct review and practice test

  Dear all,

  Here, I'm a bit confused so I need help to clarify which exam I have to take and what is the matter with this review. I took the course VMware vSphere: install, configure, manage [V5.1] and when I tried to register for the exam, he gave me the review "VCPD510: VMware Certified Professional-Desktop ' and when I tried to find some documents to study, I found two different materials, which relates to the VCP5-DT, which is all about VMware View: install, configure, manage [V5.x] and the other which is VCP - 510. While we should I study.

  Help, please.

  Hi mariusme,

  The review, you have to take is VCP5-VTC. VCPD510 is for desktop, which is entirely different. Please go to the vmware certification page and select VCP5-DCV(vmware certified professional in datacenter virtualization) and you will find the action plan. You can follow it, and since you've followed the required courses, you will be eligible to take the certification. And also sign up for VTC - VCP on Vmware Portal before you book review on PearsonVUE.

• Y at - it all good manuals or books on VMware 6 design and install?

  Any recommendations would be greatly appreciated.

  I recommend you go vBrownbag vmware design series. Please go through the youtube videos is simply superb.

• VMware Certified Associate certification - virtualization data center (VCA - VTC)

  Buenas,

  ¿Alguien me informar could sober el precio del review of certification VCA - VTC y Programación hay than prepararlo para seguir Québec? I am interested in los certificados of vmware.

  A greeting.

  Haz ese course you ayudara, complicated segun los knowledge than tengas.

  Tipo're test y creo son unas 50 questions.

  Remember haber marcado como fixed if you hemos sacado duda.

  A greeting.

• VMware View design

  Hi all

  I have a scenario as follows:

  In the same building.

  the user can take their own devices to log on to the desktop view.

  different ground, it has an ip address different range. and there difference ip range for floor of difference.

  The question is

  1. can I use the ip address to monitor the user to open a session pool for the locations and different departments?

  2 and I can force users to change their office to see if they change location.

  Thank you and best regards

  Cyril

  Here are a few documents to read:

  http://www.F5.com/PDF/solution-profiles/VMware-view-desktop-virt-SP.PDF

  http://www.F5.com/PDF/deployment-guides/VMware-view-46-DG.PDF

  http://www.F5.com/PDF/deployment-guides/VMware-view5-IAPP-DG.PDF

  http://www.F5.com/PDF/white-papers/F5-VMware-view-WP.PDF

  http://www.VMware.com/files/PDF/partners/f5networks/F5-VMware-view-deployment-guide-v17.PDF

  Linjo

• ASA - AIP - SSM design review

  Hello

  If anyone can offer you please, you will enjoy

  We have 2 ASA 5520 with SSM modules in. behind ASA is a CSS load balancer. This load balancer have ssl and ssl certificate installed module. communication from the internet to the VIP loadbalancer is SSL, the SSM module configured to control communication is limited because everythng is encrypted.

  communication between the LB farm and the server is not encryted, but there is no IPS inbetween. can you suggest if someone used the design below

  int 1 (public) - ASA1 - LB 1 interface (dmz) - inside (inside) ASA1 interface where all the web server resides

  Therefore, the traffic is on port 443 to the virtual IP address. Static on ASA 1forwards traffic to its dmz interface where 1 LB, then clear the 1 LB traffic goes to the inside interface where all the serverfarm web resides. by doing so, we can configure the SSM module to monitor the traffic of LB to webserverfarm since its between 2 interfaces of ASA. and also we can have access - list on ASA to allow traffic only between LB and Web servers

  This will be a concern on the performance of the ASA?

  What is a recommended design

  Thank you

  It is a valid design and it should work.

  The ASA will see traffic twice and the interface that is in front of the LB will see traffic entering the lb twice so I'm not sure that it is effective. Please check the amount of traffic will see interfaces to see if the ASAs can manage it.

  Since the LB will be the one actually pulling pages and to talk to your servers, why did you not pass by the ASA, but external users from do not by it, when speaking of LB?

  If you are worried about BACK against LB and you do not have another firewall to use so I assume that it is valid.

  I hope it helps.

  PK

• BlackBerry smartphones, for that I need a few RIM experts answer this question.

  This isn't really a problem of java development, but I'm not expert on the general forum. I arrived there just the other day and a guy was ranting and raving on this is terrible, the storm is compared to the iPhone.

  I have pointed out errors in his way and man, there is a lot of emotion there and a lot of very bored customers.

  I think that I calmed down most of them, but I think more about the inner workings than most, they all ask the same questions.

  The questions are basically, there are 2 main questions.

  1. the phone resets several times a day on its own. No rhyme or reason to it. I have heard of a mission that removing the SIM card algtogether might fix this sometimes. Is there a way to reset your SIM card to the factory settings?

  2. the second problem is more difficult to classify. There might be several problems, but I suspect that there is a big underlying problem. It's that everything is working properly. Things like him taking 2 minutes to take a photo or for the phone record horizontal to vertical. This kind of thing.

  If an expert he can suggest a solution or if there is a known problem that occurs and there is a difficulty, I can relay this back to them.

  One possibility is to clean the memory and restore factory. Is it possible to do so. I know that javaloader ordered a memory wipe. However, I do not know if the State of entire plant is available in EDGE tools that we installed all.

  Or post you here...

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=9500&thread.ID=20486&view=by_date_asc...

  Please close it when you did that, then it does not clutter this forum.

  I feel sorry for these guys (those who are not madmen :-) and they need help.)

  Thank you guys.

  -Donald

  We have several storms and they all have the following symptoms:

  After running for about 4 days, the system significantly slows down. You see demonstrations continuous hourglass, which means that the G.C. is overtime. A hard reset Erases (battery pull) the problem for another 4 days.

  Sometimes, the phone becomes hot all of a sudden and burn the battery in about 30 minutes. If it's in your pocket, it is immediately noticeable and you pull the battery to clear up the issue. However, if the phone is, you won't notice. Several times, I put the phone down, then took a phone completely dead (and hot) an hour later. After charging the battery, you must reset the date and restore network connections, while he was REALLY DEAD.

  Now, we have repeatedly stopped all 3rd party programs and the problem is not clear up. We keep waiting for this next OS update that solves problems.

• Ethernet VMware with Cisco EtherChannel and Trunking Question

  Hello

  Trying to get our etherchannels works correctly with our network administrator. Here is our config with a few questions.

  1. as it is to create the trunk between switch and host directly, can I use spanning tree portfast chest edge ?

  2. when don't we use no ip address and when not for this configuration? I see online showing examples with and without it.

  3. in some articles, he described in access mode , while in others he said dot1q trunk mode. See here for the access mode. Admin think it should use dot1q.

  4 Etherchannel is fully support and preferred extending from links on maps, right? Not all of the links on the same card?

  5 is this the case in order to change the load balancing algorithm in vmware first or first to the work of cisco? I did first vmware. (IP-hash)

  It's on a series with 4 cards/blades 6500 switch.

  !
  interface Port-channel200
   switchport
   switchport access vlan 81
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 69,81,172,896
   switchport mode trunk
   switchport nonegotiate
  !
  interface GigabitEthernet2/35
   switchport
   switchport access vlan 81
   switchport trunk allowed vlan 69,81,172,896
   switchport mode trunk
   switchport nonegotiate
   spanning-tree portfast edge
   channel-group 200 mode on
  !
  interface GigabitEthernet8/10
   switchport
   switchport access vlan 81
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 69,81,172,896
   switchport mode trunk
   switchport nonegotiate
   spanning-tree portfast edge
   channel-group 200 mode on
  

  DITGUY2012 wrote:

  Wow Josh. If only you had written documentation. That's the trouble with him. People like me get final instructions, because we're not the guys from network 24 x 7. Great documentation would be layout, the reasons to go this way or that way you did just. That being said, here's my summary based on this discussion.

  1. we have several VLANS that descends from 3 links on the etherchannel. Thus, we should use mode trunk because there is not a single.

  2. we have an another etherchannel with just 1 vlan (vmotion), but in all of two links. This should be the access mode. Or is it still trunk because it's the multiple links?

  3. I don't know what crash dump logger is, or how it applies to my situation.

  4. I saw the bpduguard setting before what exactly is the syntax to use for us? 6500 series.

  5. I don't know if our switch would deliver on that port. How can I tell? At this moment I have switchport setting in there.

  Thank you!

  No problem for reference, the other question of documentation is one of the languages. Their word etherchannel on HP networking hardware, 'trunk' and has nothing to do with the discussion of port "access vs circuit", which they call "tag unidentified vs.

  1 Yes

  2. you would certainly make an access port.

  3. If your server never begins to have a problem with break, VMware can a copy of the accident for the debug log. You can see an article on setting up here: put in place the collector of Dump ESXi 5.0 | VMware vSphere Blog - VMware Blogs.

  4 I'm sorry I'm not familiar with this model

  5. I think if the switchport parameter is here and connectivity seems to work, you can consider yourself safe

• VMWare Workstation, VM and Acronis TruImage question converter?

  Ask a question about the latest version of VMWare Workstation V.  7.1.3 along with the latest version of the VM converter. This version has it can import an Acronis TruImage 10 (.tib) file and change it to a virtual machine. I tried this Win7, WinVista and WinXP running without success.

  VMWare VCenter Converter Standalone v.  4.3.0 when used to try to convert a backup returns TruImage 10 "source parameters are invalid", but does not offer a method of changing the settings of the source.

  During an attempt to 'import' TruImage 10 files in VMWare Workstation v.7.1.3 the conversion wizard returns a "failed to load the VM source or image." The file may be corrupt, or a format not supported. »

  The image files are not corrupt and TruImage backup and restore work correctly with files tested image. Rooms chat VM mention some possible solutions, but they are long and not really practical long term since VM wants to work with these images.

  A someone that has tried these conversions and found a successful solution.

  Thank you

  That's right, that the converter does not support certain versions of Acronis.

  of http://www.vmware.com/support/converter/doc/conv_sa_43_rel_notes.html

  Acronis True Image Echo 9.1, 9.5 and Acronis True Image 10.0, 11.0 (product Home)

  With versions not supported (such as 2010 and 2011), you can follow the suggestion of continuum.

  André

• How to get experience on VMware certified a VCP? being my orgn. don't have ESX.

  I am certified VCP. But my orgn not used the box of ESX or VMware. But each orgn. ask for 2/3 years experience at least. So how do you gain experience on the VMWare? I can online laboratory practices? I secure Channel - ID, but I am unable to open a session also

  You can get the installed Workstation and work on it. Or you can download the evaluation version of vSphere and practice at HOME. I don't think that there is no such virtual lab online.

• Plan to change VMWare ESXi, but have a few questions

  Use VMWare server, but I'm cosnsidering passage to VMWare ESXi. I have a few simple newbie questions and apologize in advance if they are stupid. I tried myself, but have no spare hardware to do and I would like to clarify this before buying a new compatible server ESXi.

  1. read the communities that I discovered that ESXi does not support the USB storage device. It takes in charge USB devices or it does not support USB? USB ports will work in guest OS?

  2. I also read that it is possible to install and start ESXi on a USB? How is this possible if the USB storage devices are not supported? OK, the BIOS is set to boot from the flash drive, ESXi loads with a RAMDISK, but then does not recognize the device it was loading during the boot process?

  3 is supported media such as sound, 3D graphics cards?

  4 serial ports taken care of?

  5. does a GUI in which it is possible to connect, view and switch guest OS bewtween locally, corner the ESXi server machine, as in VMware server on Linux (with Fire Fox for GUI), or it does not have a GUI at all and is possible to connect to if you use another computer or a terminal to access of the guest OS on ethernet?

  6. I also read that esata disks work properly either, but techincally they SATA drives that are connected outside the chassis, and ESXi notice perhaps, that they aren't on the inside. All devices support SATA, hot by desing so how do drive hard hot and hot-switching connection work in ESXi?

  Thank you.

  1 ESXi does not support the device of USB storage for local data warehouses.  I don't remember the extent to which the guest OSes on ESXi.  I read that USB is only supported network based USB hubs.

  2. you can install ESXi on a USB key and start it.  It does not appear as a store of data however.

  3. I don't see the option for the installation of sound cards and I do not know the support of 3D video cards.

  4. Yes, the serial ports are supported.

  5. do you are unable to view the comments from the host OS console.  If you need to do this you player, Workstation or Server.

  6 ESXi does not support SATA in local storage.  It is possible however to use SATA RAID cards that emulate SCSI (Adaptec 210 X for example).

  ESXi is essentially ESX without the full service console.  Both share the same features and functionality as eachother.  ESXi is smaller, hardened operating system that is not running under Red Hat.

  Mike

  MCSE 2003/2000/NT4, VCP3/4, CCEA, CCSE, CCNA, A +.