VMware vSphere: install, configure, manage [V5.1] correct review and practice test

Similar Questions

• Fact the VMware vSphere: install, configure, manage [4.0] class eligible for VCP5 prereq?

  Hi all

  Doing some research, but has not been able to confirm.  Also left message with our VMware training rep areas last week, but never heard back, so thought I would try here.

  In 2011, I finished the VMware vSphere: install, configure, manage [4.0] courses.  I never did get my VCP4, but now want to try for my VCP5.  This class would qualify as a prereq so that I can just take the VMware vSphere: What's New (version 5.0) courses?  The web site called specifically need to VMware vSphere: install, configure, manage [V4.1] class so I think not, but I wanted to check.  I would take the shorter, which is the new class rather than a class 4 or 5 days on vSphere 5.0 so I can.

  Can anyone confirm?

  Thank you

  Bob

  No problem, this path has always been available for VCP5.

  And Bob, the counties of 4.0 class, as well as class 4.1 - is only the class 4.1, which is referred to as the class 4.0 retired some time ago and has been removed from the page VCP5 when he retired.

• VMware vSphere: install, configure, manage [V4] still applies for VCP 4.1

  Hello everyone

  I took the VMware vSphere: install, configure, and manage 09/09...will the course of the class

  to apply for the exam for VCP certification?  If so how much time I have left with remaining

  eligible with this class to take the test?

  Thanks in advance...

  Your course was based on 4.0 at the time, the current VCP4 exam is not 4.1 specific as such, if your course still qualifies you for certification. VCP4 is specifically "VCP on vSphere 4", not 4.0 or 4.1.

  Get the review plan later, the study of literature 4.1 (in the case where VMware is updated the review of some elements specific to 4.1) and use the convenient software either 4.0 or 4.1.

  Scott.

  -

• different between "VMware vSphere: install, configure, manage [V4]" and "VMware vSphere: Fast Track [V4]" "

  can someone help me understand different between "VMware vSphere: install, configure, and manage "and"VMware vSphere: Fast Track ", first becuse is about $3,000 and another is about $5000. "

  Thank you

  can someone give me some information about the rules of absente, homework and laboratories, in these classes online.

  You must participate in daily.

  You need a good Internet connection and a fixed phone or a headeset.

  Online courses are generally in central time... but in some cases may be different.

  also should I take a test on these classes?

  NO.

  just be present on these days of class?

  Yes

  I mean those class just for learning or at the end of these classes, I have to pass an additional examination for them?

  The VCP410 exam to be held in a centre VIEW (www.vue.com)... for the use of recording the same e-mail that your use of the course.

  André

• Not enough memory RAM for EDU-ICM-1301 - VMware - SAMPLE Training Services - on request in the system class: vSphere install, configure, manage course 5.5

  Hello

  I'm looking for the laboratory "EDU-ICM-1301 - VMware education Services - SAMPLE - in class on request: vSphere install, configure, manage course 5.5" but trying to follow the instructions

  LabFiles\vCenter GA Installer

  3. Double-click autorun.exe , click run.
  4. If the security warning dialog boxes appear, click run to continue.

  the installation does not work with because the memory is not enough.

  Have you ever tried this workshop?

  You have a solution for this problem?

  Thank you

  Hello

  Yes we have seen several times.

  The simple solution is to install ONLY the Client vSphere and not all vCenter Server.  Specified in the manual, but it is up to the user that installation of the client is the option left on the halfway point in the Setup user interface.

  Thank you.

• Is VMware vSphere: install, configure, and manage a must for the VCP4 certification of the course

  Is it possible to learn by myself and then pass the test. I really want to take the exam, but don't have four full days of training. Can I read onlind documentations, as well as working with VMware VC and ESX servers, so I have no chance to proctise. Thanks in advance!

  Yes, you must take an official course of the exam!

• VMWare vSphere install on a machine have an operating system already installed

  Hi guys,.

  I'm new on the VMWare products and I can't use VMWare specific terms when asking a question.

  I wonder if it is possible to do the following:

  Install vSphere to hardware that is already hosting a Windows 2003 server operating system. This Windows Server operating system would become the first VM for this platform. Then, we would add VM more to the system. We would like to avoid to remove the current operating system, and then install vSphere, followed by the installation and the configuration of the current Windows operating system as a machine virtual.

  Best regards

  Zoltan

  Post edited by: zoltnagy

  Hello

  you are weclome, please mark my answer as being correct.

• OLIVIER 11.1.1.7.1 problem installing Configuration Manager.

  Hello

  Installed OLIVIER 11.1.1.7.1 on Windows 7 64 bit.

  Apply Patch ATGLite

  step 1: Update the schema BIACOMP

  sqlplus < schema_BIACOMP > / < password_DW > @ < db > @ < ORACLE_HOME BI > /sdf/DW/ATGPF/sql/fndtbs_11170_upg.sql

  step 2: apply the updates of the seed data

  Note: this step applies only to Linux and UNIX facilities. For installations of Windows, the script required for this operation is not currently available. To find out when a specific Windows script will be available, check Oracle Fusion Middleware Release Notes for Oracle Business Intelligence Applications.

  Jump to step 2 there is no update on Oracle Fusion Middleware Release Notes for Oracle Business Intelligence Applications.

  
  

  Trying to access the Configuration of BI Apps using URL Manager:
  http:// < Host >: 7001/biacm is mistake out with messages below:

  Error 404 - not found

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.4.5 404 not found Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent. If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

  Help, please.

  Thank you

  Neeraj

  you give INCORRECT for BIACM use 9704 poart port

  second access with this url

  http:// : 9704/biacm

  It may be useful

• VMware Vsphere 5.5 Web Client - lack of scene and sanitation funtion in Update Manager Extenstion

  It is so annoying web customer switching for years return full functionality to customer normal for Update Manager

  Hi Calvinso,

  I understand what you're talking about. You will have to do with it until the next version. It is the transition phase where they try to switch completely to the web based management clients and a lot and they do step by step. I'm sure that in the next version, they will have a mature web client with fully integrated update manager.

• VMware vSphere 4.0 certification (not 4.1)

  Hello

  I took the course in class for vmware vSphere 4 (install, configure, and manage) - ESX 4.0, ESX 4.0i, vCenter server 4.0 in 2010

  Now, I intend to take the certification exam - VCP4

  However the site of vmware mylearn, in the certification process, I could not find information of certification for vSphere 4.0. I can only see vSphere 4.1

  Please can someone help me know if vSphere 4.0 certification is retired?

  I still have to take a classroom course?

  I can't write the vSphere 4.0 exam?

  Thank you.

  Don't worry, there are no different certification for 4.0 or 4.1. It's the same thing.

  of http://mylearn.vmware.com/mgrReg/plan.cfm?plan=12457&ui=www_cert

  The version 4 days this course VMware vSphere: install configure, manage [V4] taken before December 31, 2010 always meets the requirements.

  Jon Hall explained in different missions, for example http://communities.vmware.com/message/1681431

  André

• VMWare consultants gave the number of the wrong track and it starts 17!

  Hello

  Can someone help me?

  I asked to register for this course after talking with one of your advisors for about 45 minutes on the phone. I needed this VPC 5.0 certification course and I just discovered that the course that gave this Advisor was NOT required for this certification course. I need the VMware 5.0: install, manage, and configure. NO VMWare View 5.0: install, manage, and configure. I am aware that the required course is $ 500 more and would like to change the registration for the course online from April 30, 2012 - may 4, 2012 and will make payment arrangements immediately. My organization does not yet use VMware view and my needs were explained to counsel on appeal. It is only by a colleague, pointing to this point that I noticed the difference in name.

  Course has been changed successfully, thank you VM :)

  If you have talked to someone already why not just call back and tell them your problem.

  Oh, and it's vsphere: install configure manage you need to attend.

• Crash course or install, configure and manage?

  I just spent the VCA - VTC

  Then the top is the VCP course but I'm torn between one to take, through experience I was using VMware for about 2 years now. I have bunches vCenter configuration and administered a reasonably small environment on the grand scheme of things and put things in common ground... I'll take the VCP 6 dishes, so be it, but for comparison I've been watching the VMware 5.5 Fast track vs. ICM here: VMware vSphere training comparison 5.X

  I wouldn't go as far as say I am an experienced administrator, but I wouldn't say that I am a beginner. Obviously the fast lane contains much more information if it would suite me best, but what is your point of view on the 2 different courses?

  The first courses install configure manage short this week, although GA was only last Thursday! These are run on the laboratories using a beta version of the software, but that won't be for a few weeks.

  Fast Track for vSphere 6 is not yet available, but you should not wait for a long time (in weeks rather than months)

• Suggested knowledge to install, configure, and manage class V4 exam VCP

  Hello

  I'm relatively new to the it field, just graduated from College, and I really want to work to become a VCP.

  I'm looking to take the class install, configure, manage V4 some time next month, and I was wondering what do I need in terms of knowledge required to take full advantage of this course.

  Thank you for your help and your insight,

  Bao - Tran

  vSphere documentation is here: http://www.vmware.com/support/pubs/vs_pages/vsp_pubs_esx40_u1_vc40_u1.html

  Evaluation software is here: https://www.vmware.com/tryvmware/?p=vsphere

  And you can be aware of the wider infrastructure (SAN/NAS/network) the best

  Scott.

  -

• Question about VCB and VMWare vSphere 4 Essentials

  Hello

  We have 2 virtual servers: one with ESXi35 (that has VMWare infrastructure Client 2.5) and the other with ESXi4 (which a vSphere Client 4). There is an offer to purchase of VMWare vSphere 4 Essentials to half the regular price and I wanted to know if this product allows me to backup (and possibly restore) virtual machines using VCB scripts.

  Thank you very much

  Concerning

  Carlos Negroni

  From this link, http://store.vmware.com/store/vmware/en_US/DisplayProductDetailsPage/productID.126843700 , it includes VCB so the answer to your question is Yes.  I remember got an e-mail that VCB is now end of life so that it is no longer that probably not available in the next version of ESX.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• vSphere 6.0 + is not compatible with vmware vsphere Update Manager vcenter you install.

  Hello

  We run with vCenter 6.0 version 6.0.0 build 2997665.

  Installing Update Manager in different windows server with vCenter 6.0 U1 installation media.

  During the installation of Update Manager, it gives below error.

  Error: Vcenter is incompatible with vmware vsphere Update Manager that you are installing.

  Problem has been resolved after downloading installation VC VMware-VIMSetup-all - 6.0.0 - 2800571.iso, which is compatible with running VC build version.