Error of java SSL VPN "ClassNotFoundException".

Similar Questions

• Error during client access VPN SSL 210.210.12.19 you may have insufficient rights on the computer. _ (5030062)

  Error then access SSL VPN client 210.210.12.19 once connected to Active X startd download site and ends with the following error: could not start the components needed to start the client, you may have insufficient rights on the computer. (5030062)

  Note: the system is running the administrator account

  Prashanth Krishanamurthy Hi,

  Thank you for visiting the Microsoft answers community site. The question you have posted is connected to the virtual private network (VPN) and would be better suited in the TechNet Forums. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• SSL VPN error: no assigned address

  Hello. I tried for a few days now to implement a VPN SSL via the VPN Wizard of the AMPS on an ASA5510. When I try to connect to the VPN I get the error "no assigned address. Shows that the client connects to the DefaultWEBVPNGroup instead of the VPN I created the debugging. I have tried both disable the DefaultWEBVPNGroup and addition of the created ip pool for the DefaultWEBVPNGroup but I have the same result. I also configured the required exempt NAT and ACL is defined to allow a whole on all interfaces. Anyone have any idea what causes this problem?

  You need set up an alias in your more specific connection profile and then activate the ability for users to choose the profile to log on. You can also configure a group URL to direct the user to the specific profile (IE http://vpn.vpn.com/webvpn).

  Via ASDM, change the connection profile, you created and add an alias in the "Alias" field Under Configuration-> access to the network (Client)-> AnyConnect connection profiles, check «Allow the user to select...» ». Group URL can be configured under Advanced-> tab SSL VPN connection profile.

  HTH

• agent of SSL VPN error without reason

  Hello

  Message error please refer to the attachment.

  If I'm right, this may be caused by the service of Sharing (ICS) Internet connection I used the network cable with my iPhone by creation-to-peer wireless network at the hotel and before that, she worked normally all the time.

  For the moment, I can also connect VPN successfully but the State always change to "reconnect" after 8 seconds and error message popup after that many try.

  I put the function ICS 'manual' or 'disabled' and make sure that it is not in running, but not useful.

  OS: Win7 Pro x 64 Sp1

  AnyConnect VPN Version client: 2.5.6005

  A response would be appreciated.

  Andy Xu

  There is error in the SSL protocol stack. try to reinstall the vpn client. It can work.

  I found the information for the error you get below.

  The VPN client agent SSL engine encountered an error. Please retry, or restart AnyConnect. 

  Description AnyConnect has encountered an unexpected and unrecoverable error in the SSL protocol stack. One possible cause is a flaw AnyConnect.

  Recommended user response restart the computer or the device, and then try to start a new VPN connection. If the problem persists, run DART (see DART helps collect troubleshooting information) and report the error to technical support for your organization and include the DART bundle.

  Recommended response administrator if the problem persists, open a case with the Assistance Center (TAC) Cisco technical and include the DART bundle.

  Here is the link

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect25/user/messages/AC25-VPN-user-msgs.html

• SSL VPN Client - version 4.7 WebVPN session is over; Port error.

  Hi, I just upgraded to 4.7 and trying of the SSL VPN Client.

  He seems to spend the largest part of the installation on client machines. I tried more than one, ut I get this error from port.

  Any ideas?

  Try asigning the user, an ip address on the hub

• SSLVPN package SSL-VPN-Client (seq:1): installed error: others

  "Try to install the package anyconnect-victory - 2.5.2019 - k9.pkg on a Cisco 1811 running c181x-advipservicesk9 - mz.124 - 22.T5.bin router, when I run the command in config mode" webvpn install flash: anyconnect svc - win - 2.5.2019 - k9.pkg ' I get "

  "SSLVPN package SSL-VPN-Client (seq:1): installed error: others" some proposed to reformat the flash drive, does anyone know a workaround or a way to do it without losing the configuration running?  I think that there is a problem with the structure of files on the router, the installation package is capable of "webvpn" installation directory.  All ideas are welcome, thanks!

  hostname #sh flash
  -# - length - time - path
  1 23472512 February 23, 2012 21:10:34 c181x-advipservicesk9 - mz.124 - 22.T5.bin
  2 0 23 February 2012 21:37:50 webvpn
  3 4686889 23 February 2012 21:18:46 anyconnect-victory - 2.5.2019 - k9.pkg

  3772416 bytes available (28168192 bytes used)

  Processor of 1811 (MPC8500) Cisco (revision 0 x 400) with 118784K / 12288K bytes of memory.
  10 FastEthernet interfaces
  Serial 1 interface
  1 line of terminal
  31360K bytes of ATA CompactFlash (read/write)

  Configuration register is 0 x 2102

  Host name #.

  I think it's because you have not enough space - he's trying to copy the file to the directory of webvpn.

  Make sure that the install webvpn command isn't in your configuration.

  Move the anyconnect package in the directory of webvpn

  run

  WebVPN install svc flash:/webvpn/anyconnect-win-2.5.2019-k9.pkg

  And see if that helps.

• THE SSL VPN CLIENT ERROR!

  VPN concentrator running 4.7. I have to connect to the web vpn session. The SSL VPN Client installs. Message that says: "so that the SSL VPN connection is pending" and later another message appears that says "HTTP RESPONSE received from gateway SSL VPN is not valid" appears.

  What is strange is that the VPN concentrator lists me as it is connected with an IP address assigned to the ACS, but I can't access anything whatsoever. BTW, no ACLs WEB or IP filters are configured for this group that would not allow me access to the network. In addition, with the same information identification and the same group, I have no problem to access the network when the client SSL VPN is not configured to be used. IE web vpn before 4.7.

  Any ideas?

  The "VPN SSL HTTP RESPONSE received from gateway is incorrect" message may appear if the configuration of the client of the concentrator contains over split tunneling 26 entries.

• UTM50 SSL VPN IE11 problem

  I use the SSL VPN in time. I just noticed that when I tried to pass by I logged in and tap on connect, but now I get the error: virtual failure of execution of the Passage. I tried another computer that is already running IE9 and I had no problem getting in and using my office remotely over SSL.

  IE11 isn't working? or what should I be looking at.
  router is the latest firmware.

  64-bit is IE only.

  IE10 and 11 are disasters, when it comes to compatibility and how it manages Active-X controls. I'm not aware of any SSL VPN with IE10/11 suppliers.

  You can try Firefox. I can get the java applet to install, but the roads do not work for me.

  Contact support directly and express your concerns.

  You can always use IPsec client software.

• SSL - VPN can not connect - Windows 10

  Hello

  Our office has a SonicWall TZ105, with a more recent firmware, and now with Windows 10, we are unable to connect via SSL - VPN.  The user name and password are correct, and I can connect with the Android app.  But in Windows 10, I tried the MobileConnect App, the more recent mysonicwall NetExtender, used the terminal to create the VPN connection and just manually made a VPN connection and nothing works.

  The President of our company just got a new laptop and there 10 Windows, and I'm hitting a wall in the world, but need to get its connected to our office.

  Other VPN connections to other VPN servers work on this laptop, but not at our office.  He used to work with the same settings of router on Windows 7.

  Each different method of connection attempt is to give a different error.  The more strange to me, it's "the specified port is already open."  But there is no other connection to that port, and I am still able to connect using my phone.

  Any ideas?  Thanks in advance!

  I was able to solve the problem using the NetExtender 7.0.203, version downloaded from mysonicwall.com.  It was the only version (back to 5.0.?) that has been successfully can connect to our TZ105 with a laptop Win10 with all updates.

  I hope this helps someone else, I was pretty nearly pulling my hair out...

• SSL VPN problems with Internet Explorer

  Well, first of all, you need 64-bit to run Internet Explorer web based VPN devices in the SA500 series (we use SA540). After that we thought that out, we cannot always past SSL VPN Client install on client computers. It keeps reloading the Web page or simply nothing at all. Any ideas?

  In addition, that the CA guys do you use SSL VPN? GoDaddy certificates are not compatible, as I just discovered the hard way.

  Hi Qasim,

  The question seems to be more localized with windows blocks everything. I actually spent much time working on this yesterday to finally make it work with a 64 bit vista and a window 7 64 bit machines.

  The few details that I did have some success;

  Tools-> Internet Options-> security-> trust Sites

  • Move down
  • Disable protected mode
  • Click sites, and then add the SSL VPN page to become a member of trust
  • When adding the trusted site, uncheck 'require a server secure for all sites in this zone.

  Tools-> Internet Options-> Advanced-> Security section

  • Select "Allow downloads to run or install even if the signature is not valid"

  In addition, you must download Microsoft Visual C++ Distribution 2010 and ensure that you are running the latest version of Java.

  These are the things I had to do to allow Windows to allow me to connect. I hope it has some help for you.

  -Tom

• SSL VPN without disabled in ASA5505 after the Activation of the AnyConnect client

  Hello everyone,

  I am facing a problem with the VPN service in ASA 5505. Initially, I was using SSL VPN without customer who was working absolutely fine, no problem. Recently I bought AnyConnect Essentials License with license AnyConnect VPN, Mobile (for focusing on the Client SSL VPN Service for desktop and mobile respectively) and have activated these keys inside of the firewall. After that I may be able to connect to based on the VPN Client, using the AnyConnect client. Clientless VPN access is not allowing you to connect and displays an error (see the attached screenshot).

  I created two VPN profiles Viz, basic (for clientless VPN) and rvsvpn (for client based VPN). Download the AnyConnect Client I can connect to the rvsvpn profile. But if I try to connect using the basic profile, it throws an error has been to what is displayed in the exhibition.

  Please help me in this regard, as what can be done to use both the vpn connection profile. Or what the use of AnyConnect disables client access?

  Waiting for your help.

  Thanks in advance.

  Samrat.

  "Anyconnect essentials" in your configuration command to disable all profiles without customer (as well as other features that require the Premium license).

  Essentials and Premium are mutually exclusive as the performance of duties. You can have both installed licenses, but only use one or the other (and never both at once) in your running configuration.

• IOS SSL VPN issues

  Hi Experts.

  I can't get SSL VPN tunnel mode to work on a router Cisco1801. I can get the side URL works fine, but when I try and set up the Tunnel with SDM mode. I get the following error message when I try to connect.

  An error was found in the certificate of the VPN server.

  Received certificate is signed by an untrusted authority.

  Then I have the ability to install the certificate. This process seems to work, but I get the following error.

  The form of received HTTP SSL VPN gateway response code indicates an error, contact your network administrator.

  I do something wrong regarding the certificate?

  I'm sorry, just had a chance to flip through your configs. It seems that you are using a VPN pool that is not directly connected to the router. You must either use a pool directly connected or create a loopback on the same subnet.

  Also after exit

  debugging webvpn tunnel

  debugging webvpn auth

  debugging webvpn svc

  Concerning

  Farrukh

• Classic question: SSL VPN Client and Vista 64 - bit OS

  Material: 64-bit software architecture: Windows Vista Home Cisco Hardware (64-bit): 871w router Cisco Software: base of 12.4 T having a challenge with Windows Vista (64) using the SSL VPN. Use of IE, I can navigate to the url, both using the DNS name and IP address. I do not have a signed certificate, so I get the standard warning screen where you will need to click on the red x to continue. At this point, the progress bar moves for a fraction of a second and it's there. For troubleshooting I tried: - clearing cookies, cache, etc. - add url and IP to the Zone of confidence - reset areas rest default - disabled options window popup and phisher IE7 - off all 3rd party Manager BHO - withdrawal of MacAfee software suite - disable User Control that allowed me to make the sign in page, but after the signature - I had a blank white screen. Then, I downloaded Firefox 3.0 (newer) and tried to connect. After a series of guests to accept and download the certificate, I was able to connect and click on the Start button to start the session. The next little screen came as expected and he chose Java. I received a message that it could not install the Cisco AnyConnect Client's and I had to download it manually. Downloaded and installed the client software. Logging out of the browser and its closure - I could not access the page again. It appeared to hang again with a progress bar. I went to empty cache, cookies, passwords etc in Firefox and reloaded the application. Still, I was able to connect. However, I always received the message that the customer could not install and download manually. For fun, I exported the certificate on the desktop and imported into Internet Explorer. I tried the connection with IE, but he had a similar problem. I was told there was no client IPSEC for OS 64 bit (Vista at startup), but most of the new machines are 64 - bit OS systems. I would appreciate any support. Lucky me, the computer to which it is impossible to connect to the VPN is the home of the CEO of the company. The last person that wants to make him miserable.

  Cisco AnyConnect VPN Client is now available for the Windows operating systems, which includes Vista 32 and 64 bit. The Cisco AnyConnect VPN Client, Version 2.2 supports SSL and DTLS. It does not support IPSec at the moment.

  See the url below for more information on troubleshooting anyconnect vpn client:

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00809b4754.shtml

  See the following url for the release notes for the version of the client anyconnect vpn 2.2 for use with windows vista:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect22/release/notes/anyconnect22rn.html#wp815989

• SSL VPN - ASA - Active Directory LDAP

  Hello

  Scenario: ASA 8.0 (3) running SSL VPN for remote users. LDAP also authenticates access and connect to the ASA.

  For some reason any (we had a power failure, but the problem may be caused by other reasons as well), I can not connect to the ASA, as my login ID does not work, and remote users get connection error when trying to authenticate via SSL VPN web gui.

  I have rebooted the ASA and AD without any change in the situation. This service worked very well before and the problem happened suddenly. No one has all the changes for the configs. Customer do not have a backup configuration. Any suggestion on what would be the best next action to solve this problem? I'm not expert on the Microsoft LDAP configuration, and if anyone knows where I can check in Microsoft windows server 2003 for the possible LDAP problem, that would be greatly appreciated.

  Thank you

  rdianat

  the ldap bind account is just a normal user account. He didn't need even administrative permissions. If you want to use ldap for password changes he needs to password change permissions, but otherwise just a normal user account - make sure it cannot be locked in AD or the password never expires none of this things. you will see the name of the ldap account in the config of the SAA.

  LDAP-login-password *.

  LDAP-connection-dn *.

• SSL VPN using MS CA

  I work on the AnyConnect SSL VPN deployment and seeks to secure the connection with a certificate that is NOT provided by the internal CA of the ASA or a 3rd party. What I would do, is our domain CA (MS) approve the certificate - in this way, all users of portable computers that connect to the VPN will accept the certificate without asking for confirmation.

  Is there any type of document from Cisco that describes this case? I looked at the Cisco configuration documents that show:
  -install manually 3rd party SSL VPN vendor certs (IE. VeriSign)

  -to obtain digital certificates for a MS CA ASA (it emits only IPSec certificates for users - the lancers ASA an error on the EKU without specifying the role of authentication server)

  -renew/install the certificate SSL with ADSM (applies only to the self-signed certificates)

  -examined the anyconnect Administrator's guide

  I found two similar positions in the community, but there is no answer from anyone whether or not this is possible.

  https://supportforums.Cisco.com/message/259286#259286

  https://supportforums.Cisco.com/message/1324901#1324901

  I would be grateful for any feedback. I may end up copying the certificate self-signed ASA on all laptops users VPN: S

  Greg

  You treat the SSL VPN as a web server... Create a 3rd party application signing, load it onto your MS CA and select Web server profile... You will need the CA cert so the cert of identification. You load the CA cert first then the cert of the identity.

  You then attach the cert to an interface.

  I did it on my internal interface so that the customization pages would stop sent me some errors in my browser... I went with a cert of public own party 3rd for the external interface given that I expect no area machines to connect and telling users how to install certificates is a pain.