VMware does not accept clicks of Mouse/touchpad

Similar Questions

• Tactile mouse does not accept Batteries

  As soon as Windows 8 free a little less than a year, I bought the normal mouse touch Microsoft. It has served me very well and I love it like a mouse in general. Unfortunately, a problem just occurred and I can't seem to find all the reports a similar problem online. The problem is that the touch mouse does not accept batteries, as if the battery slots are broken. One thing I want to emphasize is that the slots in the battery were always very tight; It has never been easy replace the batteries, and I found myself using objects as levers to raise the batteries sometimes. Today, I want to replace the batteries and it is a battle to get them out, but not so much of a battle that I thought I was never damage the mouse. However, the mouse now does not seem to accept the batteries and battery slots are so tight. I can actually shake the batteries in the mouse now. With inserted batteries, the mouse will not illuminate; It's as if the slots in the battery becomes elongated. Maybe something happened on the springs in the back (which seem to be not at all, but pieces of metal springs)?

  Thanks for any help or advice you can give.

  Hello

  The question you have posted is related to Microsoft Touch Mouse and would be better suited to the hardware support Microsoft.

  You may need to check with the Microsoft Hardware support for more information.

  http://www.Microsoft.com/hardware/en-in/support

  I hope this helps you solve the problem. If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• When I try to activate my Apple Watch after matching it does not accept my apple ID.

  My 5s was stolen that had my Apple Watch combined with him (my Apple Watch has not been stolen). I restored my new 5 to my final point of restoration of old 5s, I tried to log in with the apple ID, but could not remember my password so I reset properly, now when I try to pair my Apple Watch to it, it does not accept my apple ID which I know is correct.

  So I reset my watch.

  I tried to put the two unit off then but still not good.

  Does anyone have any suggestions?

  Hello

  The following steps can help, including the disabling of Activation on your Apple Watch blocking:

  • On a computer, in a web browser, go to: https://www.icloud.com/
    • Sign in with your Apple ID > settings > my devices > click your Apple Watch > click the 'X' next to the watch > click on delete to confirm.
  • On your iPhone close apps open (including the app shows):
    • Double-click the Home button, and then drag upward on each of the app previews to close.
  • Disconnect from iCloud and reconnect again on your iPhone:
    • Settings > iCloud > disconnect (bottom) > sign in (using your new password).
  • Restart both devices, both turn off together, and then restart your iPhone first.
  • Try to set up your watch once again, choosing backup restore when the possibility:
    • Set up your Apple Watch - Apple Support

• remote device does not accept the connection___

  Windows 7 does not accept the connection for my site, but Xp will be, what is different about 7?

  Hello alanep,

  ·         Could you please tell us what is the remote device you are trying to access?

  ·         What version of Windows 7 is installed on your computer?

  ·         You try to connect to a remote device with Internet Explorer?

  ·         What happens when you try to connect to the remote device, you get errors?

  You can check if you have the same behavior in mode no. Add-on.

  1. click on tools on the toolbar Internet Explorer and then click on Manage Add-ons.

  2. click the name of the add-on at the top of the list of the toolbars and Extensions, and then click on disable.

  3. click on close and then test Internet Explorer.

  4. If the problem persists, open Manage Add-ons, enable the add-on that you disabled in step 2 and repeat the steps 1 to 3 for the next add-on in the list toolbars and Extensions.

  5. Repeat steps 1 through 3 until the problem is resolved or until all modules have been tested.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista does not accept the password (password not changed or forgotten)

  Vista does not accept the password (we have not forgotten password of windows startup) how can we get around this problem .the password has not been changed or forgotten Vista has a little programming problem which stops the right password

  It is most often caused by the computer being infected, so after you go back into the system, it would be wise to make an analysis.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  You can change your password to something you remember (or use a white) another administrative user account. If you had only an administrative user account, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

  My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

  My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
  When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
  I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
  Is anyone familiar with this problem and could you please help or at least point me in the right direction?
  In addition, please let me know if you need any other information on the problem.
  Thank you
  Lily

  Hello

  Try the steps from the following link

  http://support.Microsoft.com/default.aspx/KB/956196

• I can't update to of things - like iTunes, flashplayer or any error games resource or the remote device does not accept the connection

  Hi as I said in the title, whenever I have troubleshoot my connection says the remote device or resource does not accept the connection. I have a race a portable CAREB on windows 7. I can internet eyebrows and watch videos online and things like that, but I can't update things like iTunes, flashplayer or any what games that I run on my laptop. everytime I try I get a message of program control connection what ever I am updating. I checked the other computers in my house and they are all very well, as well as in home game consoles have no problem connecting to the internet and update. someone help me please

  Original title: Troubleshooting my my wireless conecction and it say the remote device or resource does not accept the connection

  Hello

  Thanks for posting in the Microsoft Community. This problem can occur because of incorrect settings of Internet Explorer. Initially, make sure you have Internet Explorer as web browser by default on the computer, refer to this link: http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

  Research I found that this problem can be solved by resetting the Internet Explorer settings. Try the following steps:

  1. Press the logo Windows + R to open the Run dialog box.

  2. Type inetcpl.cpl in the Run dialog box, press enter.

  3. Now click on the Advanced tab , and then click reset.

  4. Click apply , then ok.

   

  Note: Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Please refer to this same thread http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connection-problem-troubleshooting-the-remote/24bfdbf3-4914-45a8-ae45-38243b59be1c?page=1, he is older but he helped a lot of users.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Remote device does not accept the connection since W7 re - install.

  Since then reinstall it W7 Pro, I'm now no longer able to map a network drive on a NAS on the network. The NAS device is visible to all other domestic uses (Sonos, Internet TV, etc) and can be accessed via the front view in a web browser without any problem. I can PING the device and don't get a response, so no problems with the device itself (which was untouched before, during or after re-setup of W7).

  Just cannot map a network drive!

  Tried to disable the firewall etc, but still no luck. Also checked that all relevant services are running.

  Someone has ideas that more I can do to get my laptop to talk to it as a network drive?

  When I enter the ip address of the NAS and click 'Finish' to the card, I get the following dialogue:

  The remote device or resource does not accept the connection
  The device or resource to 192.168.x.xxx is not configured to accept connections on port 'file sharing and printers (SMB).

  any help would be greatly appreciated.
  Thanks in advance.

  Hi Stuart,

  The question you posted would be better suited to the TechNet community. See the link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• Reinstall Windows 7 does not accept the product key

  Just bought a new PC to replace my crashed. Install Windows 7 from the DVD I got for my old PC. It does not accept the product key. Think it's because it was a copy of Windows 7 upgrade. What can I do about this that I can't downgrade to Windows XP. I have the original and the product key for Windows XP disks.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Trying to update Win 7 HP for Windows 7 Pro - at any time to update does not accept my product key

  Bought two Win & Home Premium & W7 Pro to Sam W7HP is OEM, W7Pro upgrade (a cardboard hanger). Have installed W7HP and works well. Update at any time does not accept my Key Prd. Key to sting has 25 characters + -01 at the end. I can enter 25 characters (with auto-add dashes) but when I try to enter the - 01 it won't take. Present the key without the - 01 returns a valid product key error. Tried 3 times and checked my typing with each. Would appreciate any help.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Windows 8 does not accept the product key

  About 3 years ago I bought Windows 8 Pro (64-bit). In the meantime, I reinstalled the system a good several times because of some strange accidents (see my other question). Now, I tried to reinstall it again, until Windows 10 comes out, but activation does not accept the key. I read on other forums that this is probably beyond the limit of activations.

  Is there a way to reset the key or am I forced to buy a second?

  Thank you

  Mario

  Hello Mario,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you made any hardware or software changes to the Surface before the show?
  2. do you receive a code or a message when you say, 'activation does not accept the key?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because corrupt Windows activation files or parameters.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  To activate the phone and check.
  Refer to this article:
  Get help from Microsoft Windows activation
  https://support.Microsoft.com/en-us/KB/950929

  If this does not help, use method 2.

  Method 2:
  Please refer to the suggestions of nobody611 responded on 4 December 2012 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-activation-after-clean-install-does-not/01047349-516A-485f-b88d-68c1c9ac0e9c

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Re-loaded Windows 8, it does not accept the product key.

  Original title: Windows activation problem 8.

  My computer, running W8.0 of DVDs I bought died.  Dead, dead, dead.

  Now, the new computer my license to load and execute the W8, but demand to be activated.  It does not accept my product code.

  A friend told me that I needed to allow the W8 on the computer that is dead. to be able to use my DVD W8, but I couldn't do that because he is dead.

  How to fix?

  In advance, thank you for your help.

  PS: My W8 DVD is a DVD upgrade.

  You have an 'Upgrade' product that requires the installation of an earlier version of Windows before installing Windows 8.

  You could try phone activation but no guarantees:

  Windows 8 - the phone Activation

  How to activate Windows 8 by phone

  Press the Windows key + x then click Run, then type: slui.exe 4
  (Another method: press Windows + r and then type: slui.exe 4)

  Then press the ENTER"" key.

  Select your "country" in the list.

  Choose the option "activate phone".

  Stay on the phone * do not select/press any option * and wait for a person to help you.

  Clearly state your problem to the support person.

  ================= Alternatives ===================================

  Microsoft - U.S. support
  http://support.Microsoft.com/contactus/?PID=17655&TID=100109454

  Microsoft - UK support
  http://support.Microsoft.com/contactus/?ln=en-GB

  How and when to contact Microsoft and support Customer Service:
  http://support.Microsoft.com/kb/295539
  Clearly explain your problem to the support person and they will transfer you to the activation service

  How to contact a Microsoft Product Activation Center by phone:
  http://support.Microsoft.com/kb/950929

  To get a list of telephone numbers see method #1

  J W Stuart: http://www.pagestart.com

• Password Manager does not accept my password to win

  Hi, I reinstalled my system Win XP (reinstalled - restore factory restore point) and using the same password for my account in XP I used before. But password manager does not accept my password more.

  When I connect to my profile, and asked me my password in the pass Manager it sayes the authentificaiton failed. It's different when I type a password for the wrogn win... It is said immediately that he didn't, but when I type the correct password to my login to Win that he continues to deal with for a while, but then he said that he could not.

  When I login as an administrator and try it... everything is OK. but in my profile is not...

  following... when I close it cancel goes away - but when I try to double click PM icon - and I wonder password... and I type my login password right it is not that he failed, but only he disappeare and noething happened... When I try to open the MP of the plateau - the same...

  in some cases, it is said that windows password has been changed and wonder the new pass - but it's always the same, I used before so I'm sure that I don't forget and I write you the wrogn-car - I woudn't power connect victory also...

  I tried to change my password to win and by using the copy - paste I old tape pass, new, still nine and also in the PasswordManager but still does not...

  I tried to uninstall and reinstall the password manager, but he seems to have a few status registers...

  Can someone help me solve this problem? I really enjoy using this password manager...

  I found here that "password issues" aren't disccussed here... If not... where are? doI have to call somewhere and still a lot of money on the phone bill? I'd like to solve this problem online here or by mail...

  Hi Steve,

  Please excuse my late reply, but I am currently very busy and not at home.

  Yes, 'shutdown' meant turn off .

  The need to restore the keys seems to me as if all of the key information have been removed. Maybe there is some key information that remains after the uninstall process, and these are retrieved later during the new installation. During my process any key information have been recovered so far here.

  Are you sure, be connected as "LENOVO - BC8C81F0\Administrator. The name of the computer looks as if it was a random name. If your computer now has a different name. Maybe you have to change the name of the computer.

  I also feel that CSS is not very accurate in finding the right user and user profile folder.

  Sorry, if uninstalling and cleaning of different locations does not help you. If the problem is related to different account of your administrator account ID, I can't help you. It is a problem well beyond my capabilities of Windows.

  Good luck!

• How to install acrobat adobe pro DC when my macbook air does not accept the CD?

  How can I install my DC pro adobe acrobat when my macbook air does not accept the CD?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Elements of Photoshop 7 new download does not accept my serial number for 2009. Can anyone help?

  Elements of Photoshop 7 new download does not accept my serial number for 2009. Can anyone help?

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Are you using a computer administrator account will be full read/write permissions?

  I don't know if what you have is included in the link below, but take a look

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option