Sat Pro 6000 - need DVD decoder

Similar Questions

• CD or DVD drives for a sat pro 6000

  a know if I can put a dvd player SD-C2302 model in a high satellite Pro 6000 lab number or number of everything I put in it please?

  Hi Adrien,.

  You are mostly correct in your statement about CD/DVD players for your laptop. However, it is important that you buy only readers with dimensions similar to your current model.

  Generally CD/DVD players come in two varieties, those intended for installing type Tower and one for laptops. These are generally referred to as "slim" or "slimfit".

  To install the new drive, you must usually to unscrew and remove the brackets used to dock your player to your laptop as well as fittings plastic components. These must then be attached to your new drive.

  Computers laptop Toshiba use various commands (Toshiba, TEAC, Mat * a, etc.) then you will usually have a pretty wide variety to choose.

  Finally, you may need to download drivers for your new drive if none was provided or if the version of your purchase an OEM. These can be obtained on the web site of car manufacturers.

  HTH

• What are Satellite Pro 6000-compatible DVD - RW drives

  Hello

  Can someone tell me which dvd rw is compatible with the satellite pro 6000?

  Hello

  It is always difficult to find information on compatible drives due to different master / slave and c - salt settings.
  In my knowledge don Toshiba user manuals t provide such information. OK, I put t know if all don t user manual provide this, but I've found this info in my user manual.

  However. I studied a little someone suggested that the Toshiba SD-R6372 dvd recorder is compatible with Satellite Pro 6000/6100 units.
  I found this on a very popular online auctioneers ;)

• Upgrades for Sat Pro 6000

  OK, I read some of the general specifications on the site and download the manual on the site, and they say different things.

  The manual says that the memory is 200 pins and only take as two 256 MB SODIMM maxing out at 512 MB of ram. Specifications page says it can take up to a gigabyte of RAM and a person says here the 6000 SatPro taking 144 pin SODIMM.

  It's just too complicated to have 2 pages of different specifications mean 2 different things.

  How is it difficult to upgrade this laptop anyway? Here's what I want to install in your laptop...

  PCMCIA USB card 2
  CD - RW in slim Bay
  At least 512 MB of ram

  What kind of specs I will search and is PCMCIA all standard maps? Is it the same for the bay cd - rw slim are all series? I won't go to the toshiba product page to buy these, I'll get them off ebay.

  Hello

  Satellite Pro 6000 can handle with max 1024 MB of RAM. Two slots are available and are compatible RAM modules
  PC133 128 MB memory Kit: PA3085U - 1 M 12
  Kit memory 256MB PC133: PA3086U - 1 M 25
  Memory PC133 512 MB Kit: PA3108U - 1 M 51

  Memory module cover is placed on the lower side and if I remember well is fixed with two screws. It is very easy to add or remove the memory module and you can do it alone.

  On the PCMCIA USB 2 card I can't tell you much because there are many of them on the market. I recommend getting some info from your dealer.

  Please see the s manuals for this unit and you will find a few different compatible drives that can be used. If you n t have it please go HERE

  If you have any other questions, please write again.

  Good bye

• Satellite Pro 6000 lost DVD/CD Rom drive after upgrade to win 2000 sp4

  Help, please! I have a laptop Toshiba SP 6000 and after download win 2000 sp4 on the internet have completely lost my CD-ROM/DVD-Rom drive. When I go to my computer and Device Manager it has a yellow I and following the warning "windows cannot load the driver that windows is unable to locate relevant data' and it has error code 31? I've been on the Toshiba site but don't know which update to take! I really need help.

  Hello

  Well, it the very strange question s. normally after the installation of the new operating system must be recognized the CD/DVD driver.
  I have studied in the web and find nice websites that describes this problem.
  Check this site:
  http://TechRepublic.com.com/5208-11183-0.html?forumid=89&ThreadId=181561&start=0
  http://support.Microsoft.com/kb/q270008/
  http://support.Microsoft.com/default.aspx?scid=KB;%5BLN%5d; Q314060

  Good luck

  Good bye

• Sat Pro 4200: needed 3D accelerator. How can I get?

  I use the Toshiba Satellite Pro 4200. To play games as DirectX 8.0 must be installed. Games can not be installed because there is no "3D accelerator. What can I do? I have to admit that I am ignorant in this area

  Hello

  You need to install latest DirectX. As far as I know the latest version is 9.0 c
  Try to download from the Microsoft Web site:

  www.Microsoft.com/Windows/DirectX/default.aspx

• Satellite Pro L10 - need DVD writer part number

  Could someone with a satellite and a dvd burner Pro L10 please give me the part number for the drive as I want to replace my dvd rom with a writer. Thank you very much

  Hello

  I Don t part number, but I discovered this Mat * a UJ - 830 s should be compatible with your device. Google around a bit and verify this info.

  Good bye

• Sat Pro 6000 - 2 GB SD card is not readable

  I am writing on an SD card in the SD card slot. The destruction list SD card sizes up to 128 MB. The slot sees higher capacities, or is there a hardware limitation? A BIOS/driver update would allow access to superior capabilities of card?

  My card is 2 GB and if it appears in the Explorer in XP, I see no data on this subject (or do something with it) but I know that it has data on it and can be read in other devices.

  Hello

  I found information that this device can accommodate cards flash memory Secure Digital with a capacity of 8, 6, 32, 64 and 128 MB and it of not possible to use cards with more capacity. :(
  In addition, this slot machine cannot accommodate multimedia cards.
  I don t think that an update of the BIOS can deal with this problem, but if you want you can try to update the BIOS to the latest version.
  I found on the site of Toshiba, the BIOS version 1.60 of the 12.08.2003

  Best regards

• Sat Pro 6000: Unknown Base system Windows XP Prof. v.2002 SP1 device

  Where can I find a diver for a system of Base-device unknown?

  Hello

  All the drivers of Toshiba neccassery that you can find on the official website of Toshiba:
  Visit this link:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• The Satellite Pro 6000 motherboard is compatible with the satellite Pro 6100?

  Hello, need information about mainbord...
  Is the the same Satellite Pro 6000 and 6100 mainbord?

  Satellite Pro 6000 belongs to the PS600E series, and it supports the Celeron and PIII-M (Mobile) processor.

  The Satellite Pro 6100 belongs to the series of PS610E and supports the CPU P4 - M (Mobile).

  The two laptops are very similar so eventually Sat Pro 6000 motherboard could enter Satellite Pro 6100.

• Re: Satellite Pro 6000 - will not be from hibernation

  I allowed my Sat Pro 6000 to run out of battery at the weekend so I was working on it and it went into hibernation, now I can't get the screen to wake up again. When I Plug and switch on the power led lights up, but the driven system is not. If I leave the power for about 10 minutes, the fan turns on and then turns off again.

  I tried to disconnect the battery cable and the power and left these disconnected from the day to the next, but this did not help. I removed the hard drive and tried in another 6000 and it works fine.

  Everyone knows about this problem?

  Hello

  It seems more like a hardware problem as a problem of Hibernate (software).
  I think there is something wrong with the power of electronic power supply on the motherboard and so the machine doesn't wake up or start impossible.

  I think it will be not easy to fix this problem yourself.
  Therefore an ASP help would be needed I put t see any other possibility.

  Best regards

• Need a DVD/CD-RW player in-house for Sat Pro 4270

  I have asked this before, but did not drive
  I need a drive DVD/CD-RW internal for Sat Pro 4270
  Can anyone advise a specfic drive that will work

  Hi Charles,

  Please check the following URL: - (click on DISKS for information.)

  http://www.morsenet.com/www/frameset.asp?top=end_user.htm&main=http :// www.morsenet.com/www/drilldown.asp?node=464437

  Kind regards

• Satellite Pro A120 won't play DVDs - need to install a DVD decoder

  My A120 will not read the DVD. It says I need to install a DVD decoder. Should not it came with one?

  It costs enough by my employer and we have asked for dvd playback and rewrite the installation.

  Can anyone help?

  Hello Lynne

  Are you talking about self in DVD or original DVD you want to watch using preinstalled WinDVD player?

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• Noisy dvd/cdrw drive Sat Pro A100

  Hello

  Ive just got my new laptop A100 Sat Pro and check that everything works
  I noticed that when accessing a dvd in the dvd/cdrw Mat * one player combo UJDA770
  He is much stronger with pronounced sounds/cries as he accessed but subsequently, he
  can play a movie dvd without much noise. Including these noises ar not when a cd is
  in the drive.

  I am new to laptops, and I don't know if this is normal because the disk is so small?

  You could someon please let me know if this is normal or not?

  Thank you

  Kevin

  Hey Kevin,

  As you can imagine, it's not easy trying to diagnose noises without being able to hear, but there are various noises emanating from the optical drives depending on what they are doing both.

  These sounds are usually a slight noise whirring when the disc actually rotates. applied by a series of light clicks as the lens unit is positioned to read the titles of the index. Once this has been done the unit should return to its noise whirring normal light as the disc is read progressively.

  However, some drives, including the data (games or software) will produce more evidnet clicking and rattling from the unit of the lens are having to constantly reposition themselves in various locations on the drive.

  In addition to the above, some discs are not quite concentric and this can set up a slight oscillation of the disc as it spins. This will be evident by a distinct rumbling noise as the disc rotates.

  If the device emits a loud noise then it will normally indicate a contact between the disc and a part of the possible training of the lens or the drive nut. This is definitely not normal and if this occurs several times and on different disks, then I'd have the optical drive, checked by a Toshiba ASP.

  Kind regards