VMWARE ESX 4.1 Intalalion failed while loading additional driver

Similar Questions

• SOUL CS6 fails while loading

  My PC crashed (blue screen) while the encoder has been exported a vid.

  After I restarted the pc, Encoder now does not load to the start screen. When it loads the plugins etc it freezes when it gets to thelastproject, I've worked on.

  What I tried:

  Deleting the 'Watch Folder Info' file in 'C:\Users\AppData\Roaming\Adobe\Adobe Media Encoder\6.0.

  Delete the entire folder 6.0 in "C:\Users\AppData\Roaming\Adobe\Adobe Media Encoder\6.0.

  Delete all temporary files related to the project in "C:\Users\AppData\Local\Temp".

  System:

  Win 7 Ultimate x 64

  16 GB of Ram

  nVidia 560 Ti

  Intel i7 2600 CPU

  Excellent report and effort admirable to solve the problem.

  Try to delete (or rename *) three cases over C:\Users\AppData\Roaming\Adobe\:

  • \Common: This contains a TEA as well as the media cache folder, which might have a corrupted file of BSOD
  • \dynamiclinkmanager\6.0: this is an executable that uses to read the BODY of SOUL sequences and comps of EI.
  • : It's basically a version of the BODY that DynamicLink uses to render images in a sequence that SOUL is coding.

  * I recommend to rename these files, which actually hides them tea, rather than delete them. In this way, you lose nothing in the event that the market doesn't help - just delete the new folder and rename the former to its original name.

• j-4580 not recognized by Windows 8. Failed to load new driver from HP site

  HP all-in-one will print not in Windows 8. New CPU HP P2-1310. I get "some driver files are missing or incorrect.

  Reinstall the driver or try to install a newer version. "I tried more recent on your site - OJ_AIO_J4500_Full_Win

  Tell him Yes and continue.  You want to get rid of everything that has to do with the printer, so make sure you tell him Yes on something like this.

• On macOS Sierra - Parallels Desktop 12 - error unable to load Parallels driver - error ID 352

  I have updated at 10.12 some weeks ago, with no problems.

  I used 10 Parallels and put Windows 7 access every day. My Mac software was 100% up-to-date.

  After a few weeks, I started Windows and Parallels showed the error "Failed to load the driver" and KB Parallels, I found that I may need to upgrade. As I was planning to upgrade anyway, I upgraded to Parallels 12 and got the same error.

  I contacted Parallels support - they responded with this:

  Failed to load Parallels driver. Problem ID: 352

  Cause

  The problem is in the bundle /System/Library/Extensions/IOPCIFamily.kext from Apple. In the bundle's info.plist is damaged due to some reasons.

  Resolution

  If please contact Apple Support team and send them system.log and corrupt /System/Library/Extensions/IOPCIFamily.kext/Info.plist.

  The person wrote that if Apple can't help, we will try to help "."

  Is anyone able to help please?

  Thank you.

  It is a user to user forum, not a team of Apple Support forum. In any event, it sounds like a problem of Parallels as it is unlikely that multiple versions of the operating system have defective or damaged kernel extensions.

  For what it's worth, I use Parallels 11 without problem on macOS Sierra to access Windows 2000, Windows XP, Windows XP64, Windows 7 and Windows 10 of virtual machines. I think you should go back to parallels Support. I've avoided Parallels 12 because of all the problems users are reporting

• VMware ESXi 3.5 U3 Installation hangs while "loading module ide."

  Hello.

  I tried to install ESXi on a server (motherboard: Supermicro P4SDA;) Processor: Pentium 4; 3 x HDD: Samsung SP0411N & 2 x WD 400BB) and installation stops while loading add-on ide...  And that's it, no error messages - nothing.

  How can I get rid of this problem?

  Thank you!

  Had a similar problem on a box.  He had a problem with the onboard IDE drive.

  Disabled the onboard IDE and a USB DVD drive to install ESXi.

  Not sure if this will help, but the suggestion that' her.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

  

• [CARS] [root.sh FAILS] sqlplus: error while loading shared libraries

  Good,

  Let me explain the whole scenario...

  -Installation 11.2.0.3.0 RAC on RHEL 6.5

  -Silent Install (GI 4 RAC nodes)

  -Every success, except resolve.conf (that we do not use DNS to resolve the scan) prerequisites in the scene runcluvfy.sh - pre...

  -Installation launched, remote operations successful, root.sh script prompted and DAMN... gave below error

  = o/p of the root.sh on screen script =.

  User ignored the prerequisites during installation

  /U01/app/11.2.0/grid/bin/sqlplus - V... has no rc = 127 with message:

  /U01/app/11.2.0/grid/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory

  Cannot add (property/value): ('VERSION / ") for the control point: ROOTCRS_STACK. Error code is 256

  /U01/app/11.2.0/grid/bin/ocrconfig.bin: symbol lookup error: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: undefined symbol: nnfyboot

  Cannot create or upgrade OLR

  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed

  = root.sh records ends =.

  Now, this question is there for nearly 20 hours with Oracle Support and I have tried almost possible workaround suggested by Oracle Support (reboot, reinstall and...)

  Well I have no doubt in the Support of Oracle asking here on the issue, but to get chance that someone had already faced this same question.

  Now, I wish ultimately I find a culprit who are lower than o/p.

  =========================================

  [lib root@node1] # ls - ltr libsqlplus.so

  -rw - r - r - 1 grid oinstall 1477446 August 5, 2011 libsqlplus.so

  [lib root@node1] # ls - ltr libclntsh.so.11.1

  -rw - r - r - 1 root oinstall 52697691 December 10, 00:46 libclntsh.so.11.1

  [root @node1 lib] # ls - ltr libnnz11.so

  -rw - r - r - 1 root oinstall 7955322 August 17, 2011 libnnz11.so

  [root @node1 bin] # ls - ltr sqlplus

  -rwxr-xr-x 1 grid oinstall 9352 sqlplus August 5, 2011

  ======

  [@node1 grid grid] $ ldd /u01/app/11.2.0/grid/bin/sqlplus

  Linux - vdso.so.1 = > (0x00007fff7e72a000)

  libsqlplus.so = > not found

  libclntsh.so.11.1 = > not found

  libnnz11.so = > not found

  libdl.so.2 = > /lib64/libdl.so.2 (0x00000031f7400000)

  libm.so.6 = > /lib64/libm.so.6 (0x00000031f8400000)

  libpthread.so.0 = > /lib64/libpthread.so.0 (0x00000031f7c00000)

  libnsl.so.1 = > /lib64/libnsl.so.1 (0x00000031f9c00000)

  libc.so.6 = > /lib64/libc.so.6 (0x00000031f7800000)

  /lib64/ld-linux-x86-64.so.2 (0x00000031f7000000)

  ========================================
  

  your questions and comments are welcome...

  Re-install gcc libraries and test it.

• Run-time error '372': failed to load control 'ctlRowInput' while trying to run "Nexus 2.0."

  Title: Runtime error ' 372': failed to load control 'ctlRowInput' of.  Your version is perhaps obsolete.  Make sure you use the version of the control that was provided with the application.

  I tried to download an updated version of the fire behavior prediction software, "Nexus 2.0."  The program downloaded straight, but the software does not work.

  Hello

  -You are aware of any changes made on the computer before this problem?
   
  Method 1: I suggest you to uninstall and reinstall the program in clean boot mode, and check if the problem persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  Method 2: I suggest you to contact Nexus support for assistance.
  http://www.fire.org/index.php?option=com_frontpage&Itemid=1
   
  Hope this information helps.

• Error, "Page failed to Load", while customizing the control panel.

  Hello

  I recently inherited a second hand dell tower which has Windows 7.

  Everything seems to have set up ok but when I go into control panel customization, I get the message "Page failed to Load".

  After having sniffed around, it seems that the Control Panel does not use a program that the computer recognizes.

  I went through various forums for the answer, but nothing helped.

  Any suggestions?

  Hello

  Thank you for the update. It is unfortunate to know that you still experience this issue.

  As you are facing the issue in the safe mode, as well as in the new user account, it seems that there is corruption of system files that cannot be replaced by the new file system. But, you can also try to check your hard disk for errors of the last step. Read the following article.

  Check your hard drive to find errors in Windows 7

  http://support.Microsoft.com/kb/2641432/en-us

  Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Please, try the steps above and update with the State.

  Thanks again for we keep posted!

• VMware ESXi 3.5 U3 Installation hangs while "loading module sata_svw.

  I tried to install ESXi on a DELL 2970 with PERC 5 / i and the installation stops while loading module sata_svw...

  the last entry in the log of the kernel is:

  WARNING: LinSCSI: 3494 driver didn't scsi_done of its abort handler and yet he returned SUCCESS

  How can I get rid of this problem?

  Thank you!

  Hello

  had the same problem, its clearly the sata on the PE2970 :_| device.

  If you turn off (both) controller sata in BIOS Setup will work. Pretty sad: you won't miss your CD-Rom I drive so I used a USB CD-ROM for installalation.

  I know that this is only a workaround, cause I need the CD of shortcut for the guest computers, but I hope that there will be an update of the driver soon.

  Respect of

  Thomas

• VMware ESX server CPU use test alarm

  Hi all

  For a new client, I need to show the alarm and ticket slot functionlity vmware ESX server logging settings

  • Use of the CPU of a server ESX VMW
  • Use of memory for the server ESX VMW

  While I reduced the threshold value of VMW ESX Server CPU use as beloow format

  WARNING - 5% and STDev.warning - 0

  I made this two days before configuration, but still no alarm generated for this rule.

  Help the creation of a test of the abveo metric ESX alarm

  Hi - I ended up having to do such things in the past as well. I just built a virtual machine added lots of processors and memory, then for the CPU, I used the script CPUBusy.vbs from VMware (Google search which) and down it load times so that he began to max real physical processors... For memory, I just opened a massive text file in Wordpad and scroll up and down it. This gave me the circumstances to test the alarms, just don't do as a busy time or use some dev ESX servers... Danny Bravo

• Sometimes Firefox fails to load my igoogle homepage. It takes usually over after 2-3 reboots. Annoying problem.

  Sometimes, when I boot up and load Firefox, it loads without my igoogle homepage. Occasionally, it will fail to load once I've used Firefox with the igoogle homepage. It's frustrating. Have to reboot several times to get the home page to reload. When the home page is not loaded, it keeps me to use the toolbar to load email and other google tools.

  I used Firefox for years and did not have as many problems with it. When I can not load my homepage on Firefox, I usually go to Chrome or IE and it works fine. This happened for several months.

  Start Firefox in Mode safe to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  To turn on safe mode

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
  • Once you get the pop-up, simply select "" boot mode safe. "

  If it works in Mode safe mode and normal mode with all extensions (Tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: ' Firefox > quit Firefox. " Linux: "Firefox/file > exit ')

  • https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Failed to load Service Pack 1

  I have an old XP computer I want to give to a college student, but he is slow so I reformatted the drive and reloaded original XP software.  I had planned to charge all service packs to make it current.  When you try to load the Service pack 1, I get an error message "the server has failed", while he was at the point of reloading that says "connection to http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a. any ideas what's happening?  All load very well with the operatinging system and the Service Pack started to load ok until it got to this point?  Any help or advice would be greatly appreciated.  Thank you, Jesse Penn

  If you insist on installing SP1a try here instead: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=19751

  You do not need to install SP1a service pack, simply install SP2 then SP3.

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  John

• Windows Update - PAGE FAILING TO LOAD

  While trying to update windows I get "Failed to load the Page" message, what happens for a few months, this message is this little matter how I try to access updates

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Simulation of ViRL/CML emits "failed to load the battery open nodes.

  Hello

  Testing ViRL (not sure what the real version is) on an ESX Server host 5.5i. Simulation running on a client computer (VMaestro) Eclipse related ViRL server results in the following:

  1 failed to load nodes in OpenStack: HTTP status: "500", HTTP-reason: "Internal Server Error", answer: "{'computeFault': {'message': 'server has either made a mistake or is unable to perform the requested operation.', 'code': 500}}.

  2. the management console of the workspace of user (Admin mode), confirms that if no node open stack themselves. All settings on this console display the ACTIVE State of nodes, networks, projects, etc.

  3. all web services on the client Eclipse (VMaestro) - file, Simulation Engine, OpenStack Autonetkit - connected to the server ViRL show COMPATIBLE GREEN condition.

  4. execution of script reinstall CLI (Directory devstack), generates an error and crashes the ViRL and ViRL VM needs to be reinstalled.

  Thank you and best regards.

  Hello Mohan,

  VIRL version is not supported to TAC.

  Please get the new OVA, deploy it and let us know if the problem persists.

  Thank you and best regards,

  Frédéric

• IPSec on VMWare ESX 5.1 communication problems

  Hello

  We have 2 computer systems.  You running us VMWare ESX 5.1 and the other is running Ubuntu 14.04.  We have problems for IPSec to work between the two systems.  We cannot find any documentation or known issues with IPsec on VMWare ESX 5.1, so we're going to reach out to the community.

  Here's what we did:

  1. we configured Ubuntu and VMWare systems to use IPv6, we can ping each other using IPv6.

  2. we configure IPSec on an Ubuntu operating system by following the instructions below:

  https://help.Ubuntu.com/community/IPSecHowTo

  3. we have followed the instructions below to configure IPsec on VMWare.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1021769

  Here's the problem:

  When 2 Ubuntu systems run IPsec, they are able to ping each other.  However, when allow us IPSec communications between VMWare and Ubuntu, the ping is suspended.

  Here is the result of the configuration of command esxcli on VMWare:

  UBUNTU. IPv6.ADDRESS-> Ubuntu IPv6 address

  VMWARE. IPv6.ADDRESS-> address IPv6 from VMWARE

  
  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  --------           -------------------------------------  -------------------------------------  ------      -----     ---------     --------------------               -------------------           --------

  GoToDPSA UBUNTU. IPv6.ADDRESS VMWARE. Mature IPv6.ADDRESS infinity 0 256 transport 3des-cbc hmac-sha2-256 x

  VMWARE DPToGoSA. IPv6.ADDRESS UBUNTU. Mature IPv6.ADDRESS infinity 0 x 300 transport 3des-cbc hmac-sha2-256

  Name of the Source address Source Port Destination address Destination Port Protocol flow Action Mode SA

  --------          ----------------------------------------  -----------        ----------------------------------------  ----------------          --------       ----     ------     ---------      --------

  VMWARE DPToGoSP. IPv6.ADDRESS/64 0 UBUNTU. IPv6.ADDRESS/64 0 everything on transport ipsec DPToGoSA

  GoToDPSP UBUNTU. IPv6.ADDRESS/64 0 VMWARE. IPv6.ADDRESS/64 0 in ipsec transport GoToDPSA

  Here's what we found:

  After debugging the problem (using tcpdump), we found that the VMWare system sends the ESP packets, but never sends a package AH (required for IPSec authentication).  Even when the encryption protocol is null, the system of VMWare would always send ESP packets, but never once sent a package of AH.

  Here is the resulting execution trace: Ubuntu - ping-> VMWare:

  ...

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 16): ICMP6, an echo request, seq 1, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 1), length 160

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 17): ICMP6, an echo request, seq 2, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 2), length 160

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 18): ICMP6, an echo request, seq 3, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 3), length 160

  Summary:

  There seems to be a problem with IPSec in VMWare ESX 5.1 on IPv6.

  We noticed that the downloads section of the site support provided patches for VMWare ESx 4.x and earlier, but lack of patches for VMWare ESx 5.x.

  Are there known issues in this area or available patches to fix this problem?  Your kind suggestions would be greatly appreciated.  Thank you.

  Sorry for the late reply, but here the analysis of what is happening and why you are experiencing a problem.

  The Encapsulating Security Payload (ESP) to IPsec protocol will encrypt a payload of the packet and can

  Optionally authenticate the packages as well. You do not include orders allowing you to set the

  Security Association (SA) and political security (PS), but the output in your post indicates that you

  you want to encrypt the payloads both authenticate packets in mode of transport between the hosts.

  I don't know why the Ubuntu IPsec HowTo examples using protocols AH and ESP to encrypt and

  authenticate the packets. In our view, it is best done in a single step with ESP, ESXi only

  offer the option of AH with IPsec. Of course, this requires configuring the ESXi server and your

  The host with a configuration of IPsec compatible Ubuntu (or any other operating system).

  To illustrate, suppose the ESXi server has the address 2001:db8:1 and the host of Ubuntu has the

  address 2001:db8:2. We will use cbc-3des for encryption of the useful and hmac-sha2-256 load for integrity

  authentication mode of transport - just like in your message.

  On the ESXi host, the commands to do this might look like this (of course, you need to generate your)

  own keys and not re-use those I did).

  # Add the outbound security association ESXi

  esxcli ipsec ip network his Add.

  -sa-source = 2001:db8:1.

  -sa-destination = 2001:db8:2.

  -sa-mode = transport.

  -sa-spi = 0 x 200.

  -encryption = 3des-cbc algorithm-

  -encryption key = 0x6dd50fa97e919365d393fd0d404c655f80651316e9418682.

  -the integrity algorithm hmac-sha2-256 =.

  -integrity key = 0x730047c680d9812535a741bbb3521a29322cca77464cf16092519c4165ca6958.

  -sa-name = sa_1to2

  # Add the ESXi inbound security association

  esxcli ipsec ip network his Add.

  -sa-source = 2001:db8:2.

  -sa-destination = 2001:db8:1.

  -sa-mode = transport.

  -sa-spi = 0 x 300.

  -encryption = 3des-cbc algorithm-

  -encryption key = 0x50988e55ca6a0d0440cf0c29f80d308df884616ec4b55552.

  -the integrity algorithm hmac-sha2-256 =.

  -integrity key = 0xf76caa5b4985a8a9d1c7cedbcf43f21b83401818e3b8d5e526a8c99ff4d4baa7.

  -sa-name = sa_2to1

  # Add the outbound security policy ESXi

  esxcli network ip ipsec Ms Add.

  -sp-source = 2001:db8:1 / 64.

  -source-port = 0.

  -sp-destination = 2001:db8:2 / 64.

  -destination-port = 0.

  -top-layer-protocol = any.

  -action = ipsec.

  -output = flow direction.

  sp-= transport mode.

  -sa-name = sa_1to2.

  -sp - name = sp_1to2

  # Add the ESXi incoming security policy

  esxcli network ip ipsec Ms Add.

  -sp-source = 2001:db8:2 / 64.

  -source-port = 0.

  -sp-destination = 2001:db8:1 / 64.

  -destination-port = 0.

  -top-layer-protocol = any.

  -action = ipsec.

  -direction of flow = in.

  sp-= transport mode.

  -sa-name = sa_2to1.

  -sp - name = sp_2to1

  # List the ESXi security associations

  esxcli network ip ipsec its list

  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  -------  --------------  -------------------  ------  -----  ---------  --------------------  -------------------  --------

  sa_2to1 2001:db8:2 infinite mature 2001:db8:1 of hmac-sha2-256 0 x 300 transport 3des-cbc

  sa_1to2 2001:db8:1 infinite mature 2001:db8:2 of hmac-sha2-256 0 x 200 transport 3des-cbc

  # List the ESXi security policies

  List of the sp network ip ipsec esxcli

  Name of the Source address Source Port Destination address Destination Port Protocol flow Action Mode SA

  -------  --------------  -----------  -------------------  ----------------  --------  ----  ------  ---------  -------

  sp_1to2 2001:db8:1 / 64 0 2001:db8:2 / 64 0 everything on ipsec transport sa_1to2

  sp_2to1 2001:db8:2 / 64 0 2001:db8:1 / 64 0 in ipsec transport sa_2to1

  On your Ubuntu host, you need a compatible IPsec configuration. In general, on linux systems

  use the command setkey BSD-door, this is done by changing the system-wide

  in/etc/ipsec configuration file - tools.conf.

  #! / usr/sbin/setkey - f

  flush;

  spdflush;

  #

  # SAs ESP using 192 bit long keys (168 + 24 parity)

  # generated using: dd if account = / dev/random = 24 bs = 1 | xxd - ps

  # ESXi supports 3des-cbc, aes128-cbc, or null

  #

  # AH SAs using 256 bit long keys

  # generated using: dd if account = / dev/random = 32 = 1 bs | xxd - ps

  # ESXi supports hmac-sha1 or hmac-sha2-256

  #

  Add 2001:db8:1 2001:db8:2 esp 0x200

  E 3des-cbc 0x6dd50fa97e919365d393fd0d404c655f80651316e9418682

  -A hmac-sha256 0x730047c680d9812535a741bbb3521a29322cca77464cf16092519c4165ca6958;

  Add 2001:db8:2 2001:db8:1 esp 0 x 300

  E 3des-cbc 0x50988e55ca6a0d0440cf0c29f80d308df884616ec4b55552

  -A hmac-sha256 0xf76caa5b4985a8a9d1c7cedbcf43f21b83401818e3b8d5e526a8c99ff4d4baa7;

  # Security policies

  spdadd 2001:db8:1 2001:db8:2 all Pei in ipsec

  ESP/transport / / need;

  spdadd 2001:db8:2 2001:db8:1 all Pei on ipsec

  ESP/transport / / need;

  I have no problem of encryption and authentication of IPv6 traffic between a server ESXi 5.1

  and a host of 14.10 Ubuntu using this configuration.