VMware ESX 5.1 storage problems provided - please help!

Similar Questions

• Dear Sir, our creative cloud need updating, but always after 70 or 80% update, update stopped creative cloud - (display an error - 184 fetal. How can I solve this problem. Please help me...

  Dear Sir, our creative cloud need updating, but always after 70 or 80% update, update stopped creative cloud - (display an error - 184 fetal. How can I solve this problem. Please help me...

  Please visit get the following message appears when you try to install Illustrator 2015: Exit Code 184

• IPSec on VMWare ESX 5.1 communication problems

  Hello

  We have 2 computer systems.  You running us VMWare ESX 5.1 and the other is running Ubuntu 14.04.  We have problems for IPSec to work between the two systems.  We cannot find any documentation or known issues with IPsec on VMWare ESX 5.1, so we're going to reach out to the community.

  Here's what we did:

  1. we configured Ubuntu and VMWare systems to use IPv6, we can ping each other using IPv6.

  2. we configure IPSec on an Ubuntu operating system by following the instructions below:

  https://help.Ubuntu.com/community/IPSecHowTo

  3. we have followed the instructions below to configure IPsec on VMWare.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1021769

  Here's the problem:

  When 2 Ubuntu systems run IPsec, they are able to ping each other.  However, when allow us IPSec communications between VMWare and Ubuntu, the ping is suspended.

  Here is the result of the configuration of command esxcli on VMWare:

  UBUNTU. IPv6.ADDRESS-> Ubuntu IPv6 address

  VMWARE. IPv6.ADDRESS-> address IPv6 from VMWARE

  
  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  --------           -------------------------------------  -------------------------------------  ------      -----     ---------     --------------------               -------------------           --------

  GoToDPSA UBUNTU. IPv6.ADDRESS VMWARE. Mature IPv6.ADDRESS infinity 0 256 transport 3des-cbc hmac-sha2-256 x

  VMWARE DPToGoSA. IPv6.ADDRESS UBUNTU. Mature IPv6.ADDRESS infinity 0 x 300 transport 3des-cbc hmac-sha2-256

  Name of the Source address Source Port Destination address Destination Port Protocol flow Action Mode SA

  --------          ----------------------------------------  -----------        ----------------------------------------  ----------------          --------       ----     ------     ---------      --------

  VMWARE DPToGoSP. IPv6.ADDRESS/64 0 UBUNTU. IPv6.ADDRESS/64 0 everything on transport ipsec DPToGoSA

  GoToDPSP UBUNTU. IPv6.ADDRESS/64 0 VMWARE. IPv6.ADDRESS/64 0 in ipsec transport GoToDPSA

  Here's what we found:

  After debugging the problem (using tcpdump), we found that the VMWare system sends the ESP packets, but never sends a package AH (required for IPSec authentication).  Even when the encryption protocol is null, the system of VMWare would always send ESP packets, but never once sent a package of AH.

  Here is the resulting execution trace: Ubuntu - ping-> VMWare:

  ...

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 16): ICMP6, an echo request, seq 1, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 1), length 160

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 17): ICMP6, an echo request, seq 2, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 2), length 160

  IP6 UBUNTU. IPv6.ADDRESS > VMWARE. IPv6.ADDRESS: AH(spi = 0 x 00000256, seq = 0 x 18): ICMP6, an echo request, seq 3, length 64

  IP6 VMWARE. IPv6.ADDRESS > UBUNTU. IPv6.ADDRESS: ESP(spi = 0 x 00000300, seq = 0 x 3), length 160

  Summary:

  There seems to be a problem with IPSec in VMWare ESX 5.1 on IPv6.

  We noticed that the downloads section of the site support provided patches for VMWare ESx 4.x and earlier, but lack of patches for VMWare ESx 5.x.

  Are there known issues in this area or available patches to fix this problem?  Your kind suggestions would be greatly appreciated.  Thank you.

  Sorry for the late reply, but here the analysis of what is happening and why you are experiencing a problem.

  The Encapsulating Security Payload (ESP) to IPsec protocol will encrypt a payload of the packet and can

  Optionally authenticate the packages as well. You do not include orders allowing you to set the

  Security Association (SA) and political security (PS), but the output in your post indicates that you

  you want to encrypt the payloads both authenticate packets in mode of transport between the hosts.

  I don't know why the Ubuntu IPsec HowTo examples using protocols AH and ESP to encrypt and

  authenticate the packets. In our view, it is best done in a single step with ESP, ESXi only

  offer the option of AH with IPsec. Of course, this requires configuring the ESXi server and your

  The host with a configuration of IPsec compatible Ubuntu (or any other operating system).

  To illustrate, suppose the ESXi server has the address 2001:db8:1 and the host of Ubuntu has the

  address 2001:db8:2. We will use cbc-3des for encryption of the useful and hmac-sha2-256 load for integrity

  authentication mode of transport - just like in your message.

  On the ESXi host, the commands to do this might look like this (of course, you need to generate your)

  own keys and not re-use those I did).

  # Add the outbound security association ESXi

  esxcli ipsec ip network his Add.

  -sa-source = 2001:db8:1.

  -sa-destination = 2001:db8:2.

  -sa-mode = transport.

  -sa-spi = 0 x 200.

  -encryption = 3des-cbc algorithm-

  -encryption key = 0x6dd50fa97e919365d393fd0d404c655f80651316e9418682.

  -the integrity algorithm hmac-sha2-256 =.

  -integrity key = 0x730047c680d9812535a741bbb3521a29322cca77464cf16092519c4165ca6958.

  -sa-name = sa_1to2

  # Add the ESXi inbound security association

  esxcli ipsec ip network his Add.

  -sa-source = 2001:db8:2.

  -sa-destination = 2001:db8:1.

  -sa-mode = transport.

  -sa-spi = 0 x 300.

  -encryption = 3des-cbc algorithm-

  -encryption key = 0x50988e55ca6a0d0440cf0c29f80d308df884616ec4b55552.

  -the integrity algorithm hmac-sha2-256 =.

  -integrity key = 0xf76caa5b4985a8a9d1c7cedbcf43f21b83401818e3b8d5e526a8c99ff4d4baa7.

  -sa-name = sa_2to1

  # Add the outbound security policy ESXi

  esxcli network ip ipsec Ms Add.

  -sp-source = 2001:db8:1 / 64.

  -source-port = 0.

  -sp-destination = 2001:db8:2 / 64.

  -destination-port = 0.

  -top-layer-protocol = any.

  -action = ipsec.

  -output = flow direction.

  sp-= transport mode.

  -sa-name = sa_1to2.

  -sp - name = sp_1to2

  # Add the ESXi incoming security policy

  esxcli network ip ipsec Ms Add.

  -sp-source = 2001:db8:2 / 64.

  -source-port = 0.

  -sp-destination = 2001:db8:1 / 64.

  -destination-port = 0.

  -top-layer-protocol = any.

  -action = ipsec.

  -direction of flow = in.

  sp-= transport mode.

  -sa-name = sa_2to1.

  -sp - name = sp_2to1

  # List the ESXi security associations

  esxcli network ip ipsec its list

  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  -------  --------------  -------------------  ------  -----  ---------  --------------------  -------------------  --------

  sa_2to1 2001:db8:2 infinite mature 2001:db8:1 of hmac-sha2-256 0 x 300 transport 3des-cbc

  sa_1to2 2001:db8:1 infinite mature 2001:db8:2 of hmac-sha2-256 0 x 200 transport 3des-cbc

  # List the ESXi security policies

  List of the sp network ip ipsec esxcli

  Name of the Source address Source Port Destination address Destination Port Protocol flow Action Mode SA

  -------  --------------  -----------  -------------------  ----------------  --------  ----  ------  ---------  -------

  sp_1to2 2001:db8:1 / 64 0 2001:db8:2 / 64 0 everything on ipsec transport sa_1to2

  sp_2to1 2001:db8:2 / 64 0 2001:db8:1 / 64 0 in ipsec transport sa_2to1

  On your Ubuntu host, you need a compatible IPsec configuration. In general, on linux systems

  use the command setkey BSD-door, this is done by changing the system-wide

  in/etc/ipsec configuration file - tools.conf.

  #! / usr/sbin/setkey - f

  flush;

  spdflush;

  #

  # SAs ESP using 192 bit long keys (168 + 24 parity)

  # generated using: dd if account = / dev/random = 24 bs = 1 | xxd - ps

  # ESXi supports 3des-cbc, aes128-cbc, or null

  #

  # AH SAs using 256 bit long keys

  # generated using: dd if account = / dev/random = 32 = 1 bs | xxd - ps

  # ESXi supports hmac-sha1 or hmac-sha2-256

  #

  Add 2001:db8:1 2001:db8:2 esp 0x200

  E 3des-cbc 0x6dd50fa97e919365d393fd0d404c655f80651316e9418682

  -A hmac-sha256 0x730047c680d9812535a741bbb3521a29322cca77464cf16092519c4165ca6958;

  Add 2001:db8:2 2001:db8:1 esp 0 x 300

  E 3des-cbc 0x50988e55ca6a0d0440cf0c29f80d308df884616ec4b55552

  -A hmac-sha256 0xf76caa5b4985a8a9d1c7cedbcf43f21b83401818e3b8d5e526a8c99ff4d4baa7;

  # Security policies

  spdadd 2001:db8:1 2001:db8:2 all Pei in ipsec

  ESP/transport / / need;

  spdadd 2001:db8:2 2001:db8:1 all Pei on ipsec

  ESP/transport / / need;

  I have no problem of encryption and authentication of IPv6 traffic between a server ESXi 5.1

  and a host of 14.10 Ubuntu using this configuration.

• VMware esx 3.5 have problem "a file is not found.

  Dear all,

  I have the problem of VMWARE, on 8 July 09 my site has esx003 restart node (cannot use vmotion because this node is independent), but 2 moments can not start and displays the error message:

  1. a file not found.

  2. turn on/off a virtual machine fails

  3 hard files are missing.

  Please help me to find out the root cause

  Note: I found a link of reference of similar problem and how to solve it, but not sure it's exactly the same problem I can follow it or not: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003743

  The datstore view is fine. That you see only files hard.

  There is only one HARD drive attached to this virtual machine? Please also browse the data store on the SC and see if you can see one - file flat.vmdk. If the file is there, the disc should be fine.

  Please also check the vmx file to confirm if the path of the HARD drive is correct.

  Hope this helps!

• M30 problems! Please help me

  Hello

  I recently bought a model M30-961. I have a had a few problems with it. Please help me.
  (1) the touchpad gets very hot when I use it
  (2) the battery does not even last me 01:30 hours listening to music or watching DVDs (I thought that it should last for at least 3 hours because it's a CENTRINO)
  (3) is it possible to use the multimedia keys (play, rewind, forward, stop) to use to listen to music or watch DVDs without downloading the OS?
  (4) I bought the extended warranty with it. It would also cover the battery?

  Thank you
  Mazen

  Hey

  Sorry, but the extended warranty does not cover the battery, a battery warranty is just one year.

  And you can use the multimedia keys when the computer is turned off, all you have to do is to keep and hold the button mode for 8 to 10 seconds.

  How hot it gets the touchpad? and when listen you to music or watch DVDs is where all applications running on the background, which could have an impact on the battery life?

  See you soon

• I use firefox (37.0.1). Since last week, I am unable to play any kind of videos youtube esp. I'm in a big problem. Please help me.

  I use firefox (37.0.1). Since last week, I am unable to play any kind of videos youtube esp. NO change in system or the installation has been made. Please help me

  Please try first: difficulty common audio and video questions

  Second: try to reinstall https://www.adobe.com/support/flashpl.../downloads.html Flash

  Third: To ensure that all drivers are up to date: update your drivers graphics to use hardware acceleration and WebGL

  What were the results?

• Problem Bluetooth Please HELP!

  When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

  Make sure that your bluetooth device is propably connected and turned on. »

  In addition, the mobile is unable to send any file to computer th.

  I've already matched the mobile with the computer and I use windows 7 please help.

  When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

  Make sure that your bluetooth device is propably connected and turned on. »

  In addition, the mobile is unable to send any file to computer th.

  I've already matched the mobile with the computer and I use windows 7 please help.

  Hey xtheultimatethinkerx

  answered in another thread

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/41fd2b7a-50CF-477D-8748-c59363bf1405

  Walter, the time zone traveller

• ESX 3.5 license NOW QUESTION Please HELP!

  After the bottom of 4 ESX 3.5 are connected to the ESX VC server on the host. After reboot ESX * do not start going that no licens is on this host running VC server. So I can not start server VC. I think that all licenses filen is based on

  the VC server.

  Help, please!

  Unfortunately, ESX 3.5 uses a license server that is installed on the server vCenter Server. In order to avoid the question, you are probably experiencing there is a period of 14 days, which however does not always work as expected. What you need to do in this case, is to generate a "hosted" the portal of My VMware license (I hope, it's still possible) to the ESX host on which vCenter Server is currently registered. After assigning the license to the host you should be able to turn to vCenter again.

  André

• Error code 19 - CD/DVD-ROM problem. Please help and read the description first!

  I tried to load my games such as rollercoaster tycoon on my computer by inserting them into the disc drive. Nothing happens. I went to toautoplay and it had all the right settings I wanted. I changed several times and tried to re - insert the disc, but nothing has happened yet. I thought it was a problem of CD/DVD drive, so I went to 'Computer', right-click on Vista64 (C :) and selected 'properties'.) I clicked on the Hardware tab, and then on HL - DT - ST DVDRAM GS20N, my CD-ROM/DVD-ROM drive. I realized quickly that there was a problem, because the box said"device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.» (Code 19) «. I looked at the code 19 on the support Web page and found a link to a Microsoft Fixit, Windows Powershell 1.0. I installed the program, he ran through and he said that he had fixed the problem. I inserted the game once more, but still nothing happens. I went to my CD-ROM/DVD-ROM drive once more and he said that the problem was not resolved. I don't know how to solve this problem. Help, please! (It is not just the CD I try to insert, because none of the many CD I tried to use will work). Should I try to restart my computer?

  Hi meluvcheese22,

  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.

  To resolve this problem, you can follow the methods below:

  Method 1:

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article:How to back up and restore the registry in Windows:http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.

  You can check the link below: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116

  Method 2:

  a. Click Start, type devmgmt.msc and press to enter. The Device Manager window opens

  b. expand DVD/CD player and right click on the sub element and click on uninstall.

  c. restart your computer.

  d. open Device Manager, click Action,

  e. click on scan for hardware changes. Follow the instructions.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Can display disk problem - anyone please help?

  I had a problem with Photoshop and it was not copy or paste. I have reset my whole settings in Windows Vista, photoshop reloaded CC and now I have this message: Photoshop has encountered a problemw ith the display driver and has temporarily disabled the improvements using graphics hardware. Check the websitefor makes the latest version of the software?  I downloaded it on the web? What should I do because I need to work for my company?

  Please go to Device Manager, and then expand adapters.

  There, you'll be able to see the graphic card installed in your computer.

• Problem upgrading please help: S

  Hi guys,.

  @ my work, we have worked for 6 years with indesign cs2 and 3 we have these current versions in our systems and want to go buy cs6. But what will happen to my previous files(cs2/cs3)? I can still open them? I'm not going back more so not need to save back after installation of the cs6.
  so my question is can I open these cs3 and 2 files with cs6?

  and what of my fonts? Wil they work?

  Thank you.

  [I moved your thread in the general forum of InDesign. This is not an appropriate question services provider forum, not that it is clear what is...]

  All new versions of InDesign can read the older version files.

  Although it does not always perfectly. (uhoh!)

  Also, there may be some reformatting of the text anyway (not a bug), as the calibration and the text flowing code has changed a bit.

  So CS6 can certainly play CS2 and CS3 files.

  Fonts should not be a problem.

  Some experienced people will suggest that you are better export your files CS3 with INX in CS3, then open the INX files in CS6.

  Personally, my experience is that it is a mixed bag. There is a code in the new versions of InDesign to manage 'translate them' the old versions INDD files, and there is code to manage the import of the INX files (and files IDML, CS4 and later versions). None of these options is 100% bulletproof, and go further, more likely it is that you are to problems. (In other words, CS6 is very very good at reading the files CS5.5; you're more likely to have problems with the CS6 read CS2 files).

  It is also possible that there may be a corruption of file which can be brought forward by both methods, there may be benefits, once you have the file open in CS6, exporting to IDML CS6, and then opening the IDML export in CS6.

  The General advice is certainly that you should do this sort of thing with your models, or just to recreate them from scratch. Is that they are free of corruption and problems because they seem to look OK. It's one thing to have some potential problems with the old documents, but it's a very different thing to potentially corrupt all future works to an accidental former problem of the ages.

  In all cases:

  I'm not going back more so not need to save back after installation of the cs6.

  It is unwise. It's like diving off a cliff without a safety net.

  You must keep your old autour, just-in-case versions, so it is possible that newer versions would not read older versions 100%.

  Of course, whatever you do, do * NOT * overwrite your CS3 .indd with CS6 .indd files files. If you were to do it, so if you have found a problem with the conversion, 6 months from now, you would be totally and completely without recourse.

  Another strategy is to save your INDD files INX export and are ready to use the INX file or the INDD file, Alternatively, if you have any problems.

  It is also possible that it is useful to open files from CS2 to CS3 and save versions CS3 INDD/INX before opening to CS6. I don't really know if it is worth. It's probably something to keep in your bag of tricks, if you eventually problems struggle to CS6. And yet one more reason to not get rid of CS2 and CS3, until you are sure that you don't need them more (which would be "never". Hard drives are cheap. Save everything forever and always. Or at least until it stops working.)

  Good luck, freak GTR. Welcome to 2013!

• Two problems! Please help me

  After installing the latest version of Photoshop CC v14.1 (x 64) [Win7], I am facing two problems:

  -The program does not open the PNG files

  

  -Some filters are missing like Radial blur...

  

  Hello.

  It seems that you pointed out the preference of additional plug-ins folders can be seen on screencapture of GOL to one the main plug-ins folder from a previous version of Photoshop and it causes various questions such as you have described.

• Computer HP laptop problem. Please help someone!

  Hi guys,.

  So basically, my computer HP laptop froze about three times today. I had to press the button reset each time. Finally, the computer came back the menu but has frozen immediately. I pressed the reset button again. This time, when I turn on the laptop the first thing that appears is the HP Logo and the "resumption of system preparation. After a while the screen goes white and after a while once again the HP logo comes again, but this time is not written and just a loop that goes round in circles. Nothing happens after that. I tried it turn on and shut off again, but the same thing happens.

  Does anyone know how can I fix? It seems that you must press F11 when you turn it on and go through a few options to make it work again? I have some pictures and music on there I'd like to keep, can I do this? Or do I need to clean the system? There not too important! Little help would be great if someone can give me some adivice on how to fix it!

  Thank you very much

  Hi Cammy, I'm back

  Press the ESC key at startup then F2 when the Start Menu is displayed, this will start the System Diagnostics, advise me the results.

  Redemarrer restart using the ESC for the Start Menu button, press the F11 key to the restoration of the system, do not press any other button unless he asks you to do.  Let it run for 15 minutes to see if any other measurement of the recovery process.

• windows vista installation problems, someone please help

  Recently I bought windows vista home basic CD and when I goto install it I have inseet the second drive and is says file corrupt or missing someone can help?

  It has a product key

  "but he is registered."

  We can only go on what YOU tell us!

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• BEX / BEX64 problem event name. PLEASE HELP ME...

  I had this problem for the last two weeks and the same message appears ".exe has stopped working". Windows cannot open my MW2 single player or multiplayer file, The Witcher 3 Wild Hunt or GTA 5. He started only with MW2 and then more games like GTA and The Witcher has stopped working over time. The Witcher and put GTA BEX64 developed.  I read solutions online including DEP (prevention of data mining) troubleshooting, assessories - command prompt, check all the drivers updated, game compatibility, etc. Who fail to solve the problem. Please help me as soon as POSSIBLE!

  BTW, I know these games work first hand I played all these games above all of a sudden no longer responds.

  Modern Warfare 2

  Problem event name: BEX
  Application name: iw4mp.exe
  Application version: 0.0.0.0
  Application timestamp: 55d37e9e
  Fault Module name: StackHash_4c0d
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 80000008
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: 4c0d
  More information 2: 4c0d4d78887f76d971d5d00f1f20a433
  3 more information: 4c0d
  Additional information 4: 4c0d4d78887f76d971d5d00f1f20a433

  The Witcher 3 Wild Hunt

  Problem event name: BEX64
  Application name: witcher3.exe
  Application version: 3.0.7.2515
  Application timestamp: 56995fe3
  Fault Module name: StackHash_0584
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 000007fefbbb3d20
  Exception code: c0000005
  Data of the exception: 0000000000000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:0584
  More information 2: 05844721ba6f46935da4f741075b96d8
  Additional information 3: cfd7
  Additional information 4: cfd727e056ffff4bf82e32abe5e4efc5

  GTA 5

  Problem event name: BEX64
  Application name: GTA5.exe
  Application version: 1.0.678.1
  Application timestamp: 56e2b38c
  Fault Module name: StackHash_0584
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 000007fefbbb3d20
  Exception code: c0000005
  Data of the exception: 0000000000000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:0584
  More information 2: 05844721ba6f46935da4f741075b96d8
  Additional information 3: cfd7
  Additional information 4: cfd727e056ffff4bf82e32abe5e4efc5

  System specs

  Windows 7 64 bit

  i5 4690 K

  GTX 980 4 GB

  ASRock Z97 Extreme 4

  Samsung 500GB SSD

  3 TB hard drive

  PSU Corsair 850 RM

  Corsair 16 GB of Ram

  Thank you

  Cody Carroll

  The Module 'fault' is not positively identified as:

  Fault Module name: StackHash_4c0d
  Fault Module version: 0.0.0.0

  It can help to see al the modules that are loaded in a collision.

  You can download and run the following application (AppCrashView):

  http://www.NirSoft.NET/utils/app_crash_view.html

  Click on one of the recent errors GTA5.exe.

  Can you copy and paste the information that appears in the lower window that loaded modules.

  Do the same for a mistake witcher3.exe and iw4mp.exe.