VMware ESXi 4.1.0 and snapshot problem - no disk space

Similar Questions

• Catastrophic failure Ox8000FFFF and running out of disk space on FACTORY_IMAGE (d :))

  Whenever I save my files to a disc, it is said that he has been completed successfully, and then later, I get a message that says Ox8000FFFF of catastrophic failure and I am running out of disk space on FACTORY_IMAGE (:)) IM Windows Vista. I'm not a novice in computers, I am a computer expert. When I pull my FACTORY_IMAGE folder, I don't know what are the files, so I'm aftaid of monkey with them. I deleted the old and useless files, but whenever I run the backup, I get the message of Ox8000FFFF of catastrophic failure later. I can only assume that the backup and running out of disk space on FACTORY_IMAGE are related. I've seen corrections on the Net for this problem, but I'm afraid to try them. Any help would be appreciated.

  Hello

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  Should be backups on an external hard drive or DVD; external hard drive preference.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

  EDIT:

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

• Best practices in VMWare ESXi 3.5 installation and deployment of VMDK u3?

  Hi all

  I'm about to implement virtualization on my business technology

  I've got these resources to be used by VMWare ESXi 3.5

  Dell PowerEDGE 2950 III

  • 32 GB DDR - II 667 MHz

  • internal 4 x 500 GB SATA 7200 RPM HDD (RAID 5) - I know that it's slow to host the VMDK

  • Internal USB slot on the motherboard (but not USB flashdisk?)

  Dell PowerVault MD3000

  • 10 x 300 GB SAS 15 k RPM

  • 2 x Dual port Gigabit Ethernet NIC (x 4 in total)

  • iSCSI - 2 x Gigabit Ethernet for the switch (mute not to VLAN)

  I wonder where I should install the VMWare ESXi? for the VMDK, I believe that the deployment in the SAN is the right place.

  and any suggestion for the use of the SATA HARD drive internal?

  any comments would be greatly appreciated.

  Thank you.

  You mean Deployment.jpg diagram?

  In this case, there is an error.

  You need a network 2, not 4.

  Each controller and each NIC (on ESX) must have an IP in a net and another IP in the second NET.

  ESX guests 4 targets, 2 in a net, 2 in the other.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• OpenManage for VMWare ESXi has no possibility of tasks of virtual disk

  OMSA v 7.1 and 7.2 for Windows (and earlier versions) allow the user to perform many tasks on virtual disks, including reconfiguring - expand a RAID array with a new drive.

  This is not true for managing open for VMWare ESXi - although you can monitor the status of the RAID and disks with the browser of the OMSA interface type, you cannot perform tasks - can not even make a high beam Flash.

  It is a huge problem, because the PERC controllers (H700 and H800, for example) don't allow you to develop virtual using hard drives not Dell disks when you try this during startup in the bios.  (These controllers only allows you to create new virtual disks using drives not Dell).

  This test was conducted using the latest firmware (12.10.4 - 0001 A10) and drivers for the H700 and H800 and multi-server r610 ESXi 5.1.

  Other people with VMWare have been affected by the present?  The only solution is to have two player networks connected to the computer, and create a simple Windows with OMSA, boot in Windows Server to expand the table using OMSA for Windows.

  I would be interested in the comments of others, including those of Dell.  We spent hours on the phone with Dell; This seems to be the only solution.  (Yes, Dell released a firmware version last year that has ceased blocking non Dell readers, but it only works for the creation of a new virtual disk, do not expanding one existing).

  Yes.  It came through a discussion in the Dell | Servers | Discussion of the RAID community.

  en.Community.Dell.com/.../20263442.aspx

  There is a CD bootable linux called OMSA Live that you download from PowerEdge (linux OS) systems management.

  This OMSA PERC H700 and H800 control and allows you to do everything.  When you reconfigure the RAID and the PERC card starts the reconstruction, although it seems risky, you can restart under VMware and the reconstruction of the RAID continues on.  And you can analyze with OMSA for VMware.

• Question of partition: partition and narrower than the disk space

  Hi, I have a big problem with OS X El Capitan 10.11.3.

  I used to have a Windows partition with bootcamp which I deleted via bootcamp, but it crashed.

  I lost all my partitions and even os x. I have therefore started in recovery mode and launched disk utility, I could not create a partition OS X 90Go on my 120 GB SSD, and I installed OS X on it. Once installed, I have tried to maximize the size of the partition in disk utility to the actual size of the SSD, but it wouldn't work. Worse still, it actually shows my OS X partition a 60 GB instead of 90... (we also say that change log has not been activated, I allowed him but nothing happened)

  How can I make my OS X partition as big as my SSD?

  Here are some pictures of the utility disc and occupied disk space.

  

  Try to launch the Boot Camp again to see if it will delete the partition. It acts like it doesn't have.

• Problem with disk space C or WinDir

  Hello

  I have problem with space Partition C:\

  Because the driver does not match the photo below?

  And now the disk space is full of unreasonable.

  

  Please help me!

  Hello

  I don't see what your problem is, as you're singling out a piece of data, the program (x 86) files on which is placed on your hard drive.

  Where do you think that Windows 7, etc is installed?

  It is installed on the C: drive and also takes place on it.

  ___________________________________________________________________

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• Failed to remove snapshot due to disk space

  Hello!

  I tried to delete a snapshot in 10 workstation, but it failed because I ran out of space - fair enough, BUT he DID remove the snapshot icon.

  Now, I have freed disk space in order to remove the snapshot, but how can I do when the icon is missing?

  I can't just clone the virtual computer to a new place because I need other snapshots!

  I have about 20 shots then how do I know which one it is?

  Best regards

  -Morten Hermansen, Fanitas Green

  I found the same thing. It is not a good behavior of the software, because it leaves doubts: it is not deleted, but how can I remove it?

  I think that if it fails it should leave the icon to try again after you free the space.

  Is a possible workaround: create another snapshot, and then delete it somewhere inside the machine snapshot tree.

  For what I could see by looking at the disk space, after this deletion, the used space is lower than before the creation. I guess this operation triggers the actual deletion of the snapshot has disappeared. In addition, this deletion takes a long time, all in one

  'create and delete soon' should be very fast.

• RMAN problem with disk space

  Hello
  
  Oracle 10g
  
  I create backup rman complete daily and my REDUNDANCY of RETENTION POLICY is set to 2, for example
  
  FORMAT of COMPRESSED BACKUPSET "F:\BACKUP_DB\DB_%d_%u_%s_%T" INCLUDE CURRENT CONTROLFILE AS BACKUP DATABASE;
  CROSS-CHECKING OF BACKUP;
  DELETE NOPROMPT OBSOLETE;
  
  My backup drive is 100 GB and now I don't have enough space for 2 backups. I do not have enough free space because Oracle first create new third backup and then with DELETE NOPROMPT OBSOLETE it delete first.
  
  Because I do not have another disk space I put new line in my script, rman - REDUNDANCY OBSOLETES DELETE = 1; i.e.
  
  DELETE NOPROMPT OBSOLETE REDUNDANCY = 1;
  FORMAT of COMPRESSED BACKUPSET "F:\BACKUP_DB\DB_%d_%u_%s_%T" INCLUDE CURRENT CONTROLFILE AS BACKUP DATABASE;
  CROSS-CHECKING OF BACKUP;
  DELETE NOPROMPT OBSOLETE; + / / I think that this is now not needed.
  
  Now, before that Oracle creates new backup removes the older. This in my opinion is not the best. This, I'll have to new two backups but Oracle erase the old backup before it create new backup successful... Another problem is that Oracle with DELETE NOPROMPT OBSOLETE REDUNDANCY = 1 deletions and my ARCHIVELOG files.
  
  What is your opinion?
  You have a better solution?
  
  Thanks in advance!
  
  Published by: user9106065 on January 12, 2011 04:36

  Catch-22.

  You do not have enough space to contain 3 backups but you don't want to remove No. 1 after backup n ° 3 is finished.

  You can't have your cake and eat it too.

  Allocate additional disk space - for example cheaper storage or a network drive.
  Transfer the older backup to the additional disk space.

  Hemant K Collette

• New on VMWare... Login and password problems

  Hi all

  I inherited a few major COMPUTER disasters with a client. I'm new to VMWare and have found that several virtual servers are no longer running. We have pay to this topic. When I run the Home Page of VMWare Server it takes me to VMware Infrastructure Web Access with a login and password, but I have no idea what could be. The person who set up the system is not reachable. Is there a way to identify and fix this mess?

  Thanks in advance.

  Rob

  Please reward points - we must know if we helped.

  Click here to solve the problem-[http://communities.vmware.com/docs/DOC-9390: d-9390]

  Click here for the manual http://www.vmware.com/pdf/vmserver2.pdf

• Unable to write the email in the box to the letters. Make sure the file system allows write privileges, and you have enough disk space to copy the mailbox.

  How to make sure the file system gives me write rights? This started last night on my Dell desktop running Windows 10, I also a Dell laptop running Windows 10 and my emails come on it without any problem, but the Office of my home computer is so I need to get my emails on this work. Please answer as soon as POSSIBLE with everything you might need me

  you have an anti virus? try to turn it off.

• Database cache and running out of disk space

  Enthusiast Adobe here, always learn PP CS6:

  I was running out of space on my c: drive and under preferences in PP... Media... I found that the location has been set on my folder\Roaming\Adobe\Common\ AppData

  The AppData folder was almost 1/2 of my entire hard drive used space.

  I clicked on the "Clean" button and I got a lot of space.

  Can I choose another drive and the folder for my the media Cache database?

  It's going to be a problem, because I clicked on the clean button?

  C drive space http://forums.adobe.com/thread/1007934?tstart=0 - if you do not want to select a different drive

• Log SOA/BPEL files causes problems of disk space

  Hi all
  
  We use SOA SUITE - 10.1.3.4(R12+DB_10.2.1), and it worked well for the last 7 months. Now that we are having on new problem.
  
  System SOA writing huge under the folder by default/log and journal opmn/log.
  The size of each log file is larger than 2 GB. SOA home busy with > 40 GB with log files.
  His affect others (DB, the R12 etc.) applications running on the same Linux machine.
  
  Please help me in this matter.
  
  Thank you
  Karim

  It is a common problem. You can rotate these logs, follow this blog note

  http://orasoa.blogspot.com/2008/06/application-server-rotating-log-files.html

  see you soon
  James

• Problem with disk space

  Try to publish on DVD with Movie Maker (Vista) - Preview takes 35 minutes.  Message says "Will not match" - 75 minutes on the capacity of the drive.  This "bad s?  Never had this problem before.  Thank you

  Try Publishing (save) the file Movie Maker in the. WMV video format
  in a folder on your hard drive. Then import them. File WMV in DVD Maker.

  (If you are unable to publish (save) Movie Maker... one or more of)
  your sources (photos, video clips, audio clips) files may be incompatible
  or corrupted)

  The following articles explain how to publish (save) in the. WMV format.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  If you happen to use Live Movie Maker... See the following tutorial:

  How to save the project in Windows Live Movie Maker
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

• VMWare ESXi 5.5 - VMotion & HA supported MDM physical or virtual

  Hello

  Hope someone can shed some light on the survey below:

  1. can you VMWare ESXI 5.5 HA and Vmotion supported with vmdk files located in front of multiple vmfs datastore 3/5? I have problems with VMotion or HA?
  
  2. can you VMWare ESXI 5.5 HA and Vmotion (not storage Vmotion) support with a VM scenario below:

  3 three nodes with iSCSI SAN storage

  VM1
  -Drive C-> vmfs Datastore1
  -Drive D-> RDM (is this support on a physical or virtual compatibility mode)
  

  VM2

  -Drive C-> vmfs Datastore 1

  -Drive D-> vmfs Datasore 2

  
  IV ' e seen these link below no mention if need pyshical or virtual mode
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1005241
  https://pubs.VMware.com/vSphere-55/index.jsp?topic=%2Fcom.VMware.vSphere.storage.doc%2FGUID-D9B143D8-9F93-41D1-A32F-9FF4DE4CDF14.html
  
  3. can you multiple access by 5.5 ESXi host the same data store (located on a San) vmfs using the free version of ESXi 5.5?
  Can I use this in a production environment? I have seen some companies test this on a non-production environment. Technically, it works.
  
  Thank you
  Paul

  Welcome to the community-

  (1) as long as the DRS HA cluster hosts see data even warehouses there will be no problem

  (2) once more, also longer than the nose can see data warehouses including the LUNS as the RDM it home should be without issue.

  (3) Yes multiple instances of the free version of ESXi can access LUNS shared - Yes it can be used in a production environment, but remember you can not handle the free hypervisor with vCenter.

• adding additional disks to existing VMWare ESXi host

  If I have a VMWare ESXi host that has 2 disks configured in Raid 1 and later add more than 3 drives and configure these 3 drives in Raid 5, will host VMWare ESXi what to see and be able to use it without any settings?

  You may need to perform a new crawl, but there should be no problem. Make sure that your RAID 5 array is broken into less than 2 TB LUN. (2 TB less 512Bytes)