VMware ESXi recebendo Máquina virtual Microsoft Virtual PC

Similar Questions

• VMware ESXi 5.1 can run Microsoft Hyper-V Server 2012 SMV also, nice!

  I created a detailed instructions (with screenshots and video) using GA-level code here:

  http://tinkertry.com/ESXi-5-1-running-hyper-v-Server-2012

  using the "basic" version of the new Hyper-V, with tips and ideas from these forums and other sites on the previous beta tests.

  Here's the gist:

  • Create a "Microsoft Windows Server 2012 (64-bit)" VM, using the default Configuration
  • Right click on the new virtual machine and material virtual upgrade to Version 9
  • twist the VMX, adding these 4 lines:

  MCE. Enable = TRUE

  Hypervisor.CPUID.v0 = FALSE
  featMask.vm.hv.capable = Min:1″ «»
  VHV.enable = TRUE

  • Remember, it is assigned to a network where the vSwitch is Promiscuous Mode to Accept
  • Turn on the new machine virtual of Hyper-V
  • perform the default installation and configure Hyper-v, hard IP-code if you wish, create an Admin user and password name that matches a customer's system
  • create a Windows 8 'customer' VM, as the Hyper-V Manager takes just a few seconds to add
  • Difficulty of COM security on the client system
  • use Hyper - V Manager this virtual machine to connect to Hyper-V, and then...
  • create a Hyper-V hosted Virtual Machine, can connect you and turn it on to test

  I'm looking forward to suggestions or alternative methods, but for the moment, it was the only way I could get it to work in my own laboratory, thought that others might not want to try to replicate this exercise.

  Windows Hyper-V (not supported) is a selection of OS comments available through the user interface in Workstation 9.  It defines the guestOS to 'winhyperv '.  Although the selection of the BONES of Hyper-V is not available through the user interface of 5.1 ESXi, I understand that support it is always there.

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• Como leer USB desde virtual machine in VMWARE ESXi 4.0?

  A cordial Saludo a todos.

  Tengo wont in a server the Vmware ESXi 4.0 platform, sober cual tengo una virtual machine en Windows Server 2003.

  Necesito UN por favor me indicandome como debo hacer para leer desde the virtual USB devices help machine Win. Server 2003.

  Desde el client Vsphere, ingreso a virtual machine of the Delcourt config, there are added el driver USB (ver imagen adjunta), pero ahun sigue sin funcionarme.

  Quedo muy atento a sus comentarios.

  Saludos.

  Para aquellos con VMWare ESXi 4.0 Estos his los comandos para fornuis 4.1, the gran novedad 4.1 are el soporte para Máquinas Office USB.
   
  De el addition of VMware ESXi en el sitio of mailing package. :

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vsphere_hypervisor_esxi/4
   
  ESXi 4.1 (change ZIP ESXi 4.0)

  The ultima version available

  A1 knew servidor con VMware vSphere client ESXi.
  Apague (poweroff) todas las maquinas office desde el servidor.
   
  Haga click derecho sober el arbol y poner ESXi a mantenimiento modo.

  UNA vez hecho esto, vaya has the config of VMware vSphere data of the client - datos almacen - almacen click on database "sober" derecho y push-button.
   
  Tenga into account that el anterior are 'SUFFER', haga click en el y luego undergo. Archivo zip en el almacen of data.
   
  El siguiente paso are al por Existing VMWare Server access.

  If ssh without esta en VMWARE habilitada, siga los pasos following in her console server:

  ALT + F1 para as aparezca algo in the pantalla, escriba "sin soporte.

  the root contrasena ingresar

  VI / etc / inetd.conf

  descomentar the line that contains parameters of the SSH los y el archivo save.

  REINICIAR el servidor.

  Ready, con el servidor enable Existing through SSH.

  Comprobacion del archivo:

  esxupdate - package = / vmfs/volumes/datastoreI/upgrade-from-ESXi4.0-to-4.1.0-0.0.260247-release.zipcheck

  If "Check OK", run the change:

  esxupdate - package = / technical vmfs/volumes/datastoreI/upgrade-from-ESXi4.0-to-4.1.0-0.0.260247-release.zip

  NOTE: este 'almacen of datos' are el number of su almacen of datos e caso, I can change number, entonces uno el

  LS / vmfs / Volumes /.

  Y ver el number that in su almacen of datos esta.

  Once completed the change, el servidor is reiniciara, por lo that connect acaba con el client of VMware vSphere, quitar el mantenimiento modo y las maquinas office.

  Important note:

  Run USB, las maquinas office debe ser version para el 7 y add el driver USB en the virtual machine if is is in version 4, the fuera Máquina virtual con simplemente haga click derecho in the part superior su version 7 of change.

• Gostaria of saber como uma imagem deuma Máquina virtual passar para dentro esxi.

  Own uma Máquina com o esxi4 wont, peguei uma imagem uma Máquina virtual para testar, gostaria of saber como passar essa imagem para dentro esxi?

  Xompxomp, if you want to import a virtual machine in your esx server if it has been created on vmware workstation or another vmware solution, you can still use VMware converter, and also using vmware converter, you can import a physical machine in your esxi system.

  http://www.VMware.com/products/converter/

  If you want that I help you in Spanish I will do without any problem, but I do not speak Portuguese

  Kind regards.

  If you find this information useful, please give points to "correct" / "useful."

  My blog virtualizacion you en idioma

• OpenManage for VMWare ESXi has no possibility of tasks of virtual disk

  OMSA v 7.1 and 7.2 for Windows (and earlier versions) allow the user to perform many tasks on virtual disks, including reconfiguring - expand a RAID array with a new drive.

  This is not true for managing open for VMWare ESXi - although you can monitor the status of the RAID and disks with the browser of the OMSA interface type, you cannot perform tasks - can not even make a high beam Flash.

  It is a huge problem, because the PERC controllers (H700 and H800, for example) don't allow you to develop virtual using hard drives not Dell disks when you try this during startup in the bios.  (These controllers only allows you to create new virtual disks using drives not Dell).

  This test was conducted using the latest firmware (12.10.4 - 0001 A10) and drivers for the H700 and H800 and multi-server r610 ESXi 5.1.

  Other people with VMWare have been affected by the present?  The only solution is to have two player networks connected to the computer, and create a simple Windows with OMSA, boot in Windows Server to expand the table using OMSA for Windows.

  I would be interested in the comments of others, including those of Dell.  We spent hours on the phone with Dell; This seems to be the only solution.  (Yes, Dell released a firmware version last year that has ceased blocking non Dell readers, but it only works for the creation of a new virtual disk, do not expanding one existing).

  Yes.  It came through a discussion in the Dell | Servers | Discussion of the RAID community.

  en.Community.Dell.com/.../20263442.aspx

  There is a CD bootable linux called OMSA Live that you download from PowerEdge (linux OS) systems management.

  This OMSA PERC H700 and H800 control and allows you to do everything.  When you reconfigure the RAID and the PERC card starts the reconstruction, although it seems risky, you can restart under VMware and the reconstruction of the RAID continues on.  And you can analyze with OMSA for VMware.

• Configuration of IPSec in VMWare ESXi can be applied to virtual machines running?

  Hello

  I have an operating system running inside VMWare ESXi 5.1.  Let's call is "MyLinux".  It is a modified version of Linux which does not support IPSec.  So I try to get VMWare to manipulate IPSec for MyLinux.

  I used esxcli orders to successfully create configurations for IPSec between VMWare itself and other systems.

  However, I wonder if I can use the same esxcli commands to configure IPSec between MyLinux and other systems?  In my tests, VMWare does not perform tunneling IPSec data between the running machines and other virtual systems.

  It is an illustration of the configuration I created for MyLinux in VMWare.  I also have a security policy that is not visible.

  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  --------                              -------------------------------------      -------------------------------------  ------      -----     ---------     --------------------               -------------------           --------

  MyLinuxToExternalSA MyLINUX.IPv6.ADDRESS EXTERNAL. Mature IPv6.ADDRESS infinity 0 x 300 transport 3des-cbc hmac-sha2-256

  ExternalToMyLinuxSA EXTERNAL. IPv6.ADDRESS infinite mature MyLINUX.IPv6.ADDRESS of hmac-sha2-256 0 x 256 transport 3des-cbc

  When I captured a trace TCP ping between MyLinux and the external system, MyLinux never sent the IPSec packets. Everything was sent in the clear.  This suggests that VMWare does not apply the rule for MyLinux, but I would like to confirm.  Thank you.

  Kwabena

  When you configure IPSec on ESXi, you sécuriserez the VMkernel traffic, not the virtual machine... If you want to protect the traffic of the virtual machine, you will need to enable IPSec on guest operating system.

  Here is more information on IPSec on ESXi: VMware KB: IPv6 and IPsec configuration on vSphere ESX and ESXi 4.1, 5.x ESXi

• VMWare ESXi 5.5 - VMotion & HA supported MDM physical or virtual

  Hello

  Hope someone can shed some light on the survey below:

  1. can you VMWare ESXI 5.5 HA and Vmotion supported with vmdk files located in front of multiple vmfs datastore 3/5? I have problems with VMotion or HA?
  
  2. can you VMWare ESXI 5.5 HA and Vmotion (not storage Vmotion) support with a VM scenario below:

  3 three nodes with iSCSI SAN storage

  VM1
  -Drive C-> vmfs Datastore1
  -Drive D-> RDM (is this support on a physical or virtual compatibility mode)
  

  VM2

  -Drive C-> vmfs Datastore 1

  -Drive D-> vmfs Datasore 2

  
  IV ' e seen these link below no mention if need pyshical or virtual mode
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1005241
  https://pubs.VMware.com/vSphere-55/index.jsp?topic=%2Fcom.VMware.vSphere.storage.doc%2FGUID-D9B143D8-9F93-41D1-A32F-9FF4DE4CDF14.html
  
  3. can you multiple access by 5.5 ESXi host the same data store (located on a San) vmfs using the free version of ESXi 5.5?
  Can I use this in a production environment? I have seen some companies test this on a non-production environment. Technically, it works.
  
  Thank you
  Paul

  Welcome to the community-

  (1) as long as the DRS HA cluster hosts see data even warehouses there will be no problem

  (2) once more, also longer than the nose can see data warehouses including the LUNS as the RDM it home should be without issue.

  (3) Yes multiple instances of the free version of ESXi can access LUNS shared - Yes it can be used in a production environment, but remember you can not handle the free hypervisor with vCenter.

• VMWare ESXi under Virtual Box tests

  Hi all

  Just installed VMWare ESXi under VirtualBox with a free license to evaluate it before you consider moving my XCP it based VMs. However, after installation I can't pull up a single VM.

  I just create a 32-bit VM Debian base and fixed the Debian netinstall ISO on the CD player. However, when I try to turn on the virtual machine, it runs for a few seconds before turning off.

  I have attached the log file.

  Any suggestions?

  Thanks in advance for any help.

  Andy

  The vmmcores.gz file shows that the EFER. The SCE bit is clear.  What explains the illegal opcode exception.  However, I don't see how EFER. CES has got to be clear.  What version of VirtualBox do you use?

• ES posible ver una Máquina virtual desde el 5.1 esxi host?

  MI pregunta are esa, TR desde an ordenador, in el instale a server esxi 5.1, puedo interactuar con una Máquina virtual o unica manera access has the same're vclient desde otro pc through.

  MUCHAS gracias

  Para entrar Máquina tenes dentro following options:

  1. Enter via consoled him the desde el client vsphere vm dentro
  2. Enter via consoled inside of the web desde el client vm
  3. Enter inside the vm con UN RDP (Windows)
  4. The vm dentro entrar con ssh (linux)

  Desde el hipervisor solo podras tasks of Administration hosts del hacer y vms.

  Diego

• Alguem sabe como dedicar uma porta usb física para um Máquina virtual no esxi 5.0 vm?

  BOM dia,.

  Preciso dedicar uma porta usb (fisica) para uma Máquina em specific virtual, e as seja available only para ela e as renconheca automatically (como Sin maquinas physical).  JA uma controller usb, so that ele renconhece os dipositivos online adicionei na minha maquina e nao e isso than I need. Alguem pode me help?

  Muito Obrigado.

  Bem Vindo!

  Primeiramente verifique to voce utiilza a HW virtual com Máquina Virtual em v7, vmware tooks e wont etc...

  Requerimentos para use: no primeiro link final desse, tem o como mapear o device principle.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1022290

  Outro ponto e is seu e para fazer esse mapeamento compativel USB device.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1021345

  Boa sort,

  atribua os pontos is a resposta faith util

• Como transformar una Máquina virtual xen a vmware

  Buenas,

  Me gustaria saber con that could programa transformar una Máquina virtual xen a vmware.

  Gracias.

  If o CoolCD converter not las herramientas clonado y Bart-PE virtualizacion.

  Saludos.

  Xavier

  VCP4 and professional VCP3 certified VMware.

  -

• Anyone run a Terminal servers virtual with VMware ESXi 3.5 If Yes please share your experiences?

  Hello guys,.

  We are runnig Terminal Server with Windows Server 2003 Ent in a cluster environment (TS 7), we plan to go with VMware ESXi 3.5 to virtualize the TS. Does anyone have any kind of experiences that can help make a decision?

  Thank you.

  Keep an eye on the side esxtop ESX and see your % RDY meters in this output.  Don't forget, as underlined chamon, with high vSMP values do not match always the best performance.  Typical scenarios citrix/ts use 1-2 vCPU for more effective results.  If you bump up to a larger number of users, you also want to watch the overcommitt on your processors and vCPUs in the box.  Many users a lot of switching and use heavy context on the processors for the management of the OS and the user.  1-2 vCPU seems to be the sweet spot.  What kind of applications are underway within the environment?

  -KjB

  VMware vExpert

• connect libreria fisica in una Máquina virtual para backup.

  Buenas

  What posible montar una libreria SAS a una Máquina virtual if el tiene una tarjeta SAS how ESXi host y libreria conectada directly?

  MUCHAS gracias.

  Hola,

  Échale a vistazo a esto:

  VMware KB: Configuration of tape drives support for the seller and on VMware ESX/ESXi 4.x/5.x/6.x media changers

  Can you sea ayuda

• VMware HA and recovery of virtual machines (not to restart them)?

  Hello

  I need help clarify something with VMware HA.

  When I do manually our primary ESXI host, the VMs appear and restart on the secondary host.

  Yes virtual machines are restarted automatically, but it does not resume the virtual machine without interruption as DRS and provides that vMotion.

  Is there a way I can configure HA to not restart and resume the virtual machine in place without interruption?  If not, what are my other options I can configure in VMware ESXi do exactly, if any?

  Thank you very much

  Jan

  HA is used in the event of a host failure, so there is no chance to migrate a workload (curriculum vitae) to another host. What you are asking for can be achieved with FT (Fault Tolerance) where a secondary VM is created on a different host and basically synchronized with the primary virtual machine. In case of failure of the primary virtual machine VM school can resume (almost) without interruption.

  André