VMWare ESXi under Virtual Box tests

Similar Questions

• Can I have VMWare Player and Virtual Box to the same PC?

  Can I have VMWare Player and Virtual Box to the same PC?

  Can perform the same two times?

  Hello

  Yes, that's correct.

  --

  Wil

• OpenManage for VMWare ESXi has no possibility of tasks of virtual disk

  OMSA v 7.1 and 7.2 for Windows (and earlier versions) allow the user to perform many tasks on virtual disks, including reconfiguring - expand a RAID array with a new drive.

  This is not true for managing open for VMWare ESXi - although you can monitor the status of the RAID and disks with the browser of the OMSA interface type, you cannot perform tasks - can not even make a high beam Flash.

  It is a huge problem, because the PERC controllers (H700 and H800, for example) don't allow you to develop virtual using hard drives not Dell disks when you try this during startup in the bios.  (These controllers only allows you to create new virtual disks using drives not Dell).

  This test was conducted using the latest firmware (12.10.4 - 0001 A10) and drivers for the H700 and H800 and multi-server r610 ESXi 5.1.

  Other people with VMWare have been affected by the present?  The only solution is to have two player networks connected to the computer, and create a simple Windows with OMSA, boot in Windows Server to expand the table using OMSA for Windows.

  I would be interested in the comments of others, including those of Dell.  We spent hours on the phone with Dell; This seems to be the only solution.  (Yes, Dell released a firmware version last year that has ceased blocking non Dell readers, but it only works for the creation of a new virtual disk, do not expanding one existing).

  Yes.  It came through a discussion in the Dell | Servers | Discussion of the RAID community.

  en.Community.Dell.com/.../20263442.aspx

  There is a CD bootable linux called OMSA Live that you download from PowerEdge (linux OS) systems management.

  This OMSA PERC H700 and H800 control and allows you to do everything.  When you reconfigure the RAID and the PERC card starts the reconstruction, although it seems risky, you can restart under VMware and the reconstruction of the RAID continues on.  And you can analyze with OMSA for VMware.

• Configuration of IPSec in VMWare ESXi can be applied to virtual machines running?

  Hello

  I have an operating system running inside VMWare ESXi 5.1.  Let's call is "MyLinux".  It is a modified version of Linux which does not support IPSec.  So I try to get VMWare to manipulate IPSec for MyLinux.

  I used esxcli orders to successfully create configurations for IPSec between VMWare itself and other systems.

  However, I wonder if I can use the same esxcli commands to configure IPSec between MyLinux and other systems?  In my tests, VMWare does not perform tunneling IPSec data between the running machines and other virtual systems.

  It is an illustration of the configuration I created for MyLinux in VMWare.  I also have a security policy that is not visible.

  Name Source address Destination address State SPI Mode Encryption Algorithm, integrity algorithm to life

  --------                              -------------------------------------      -------------------------------------  ------      -----     ---------     --------------------               -------------------           --------

  MyLinuxToExternalSA MyLINUX.IPv6.ADDRESS EXTERNAL. Mature IPv6.ADDRESS infinity 0 x 300 transport 3des-cbc hmac-sha2-256

  ExternalToMyLinuxSA EXTERNAL. IPv6.ADDRESS infinite mature MyLINUX.IPv6.ADDRESS of hmac-sha2-256 0 x 256 transport 3des-cbc

  When I captured a trace TCP ping between MyLinux and the external system, MyLinux never sent the IPSec packets. Everything was sent in the clear.  This suggests that VMWare does not apply the rule for MyLinux, but I would like to confirm.  Thank you.

  Kwabena

  When you configure IPSec on ESXi, you sécuriserez the VMkernel traffic, not the virtual machine... If you want to protect the traffic of the virtual machine, you will need to enable IPSec on guest operating system.

  Here is more information on IPSec on ESXi: VMware KB: IPv6 and IPsec configuration on vSphere ESX and ESXi 4.1, 5.x ESXi

• VMWare ESXi 5.5 - VMotion & HA supported MDM physical or virtual

  Hello

  Hope someone can shed some light on the survey below:

  1. can you VMWare ESXI 5.5 HA and Vmotion supported with vmdk files located in front of multiple vmfs datastore 3/5? I have problems with VMotion or HA?
  
  2. can you VMWare ESXI 5.5 HA and Vmotion (not storage Vmotion) support with a VM scenario below:

  3 three nodes with iSCSI SAN storage

  VM1
  -Drive C-> vmfs Datastore1
  -Drive D-> RDM (is this support on a physical or virtual compatibility mode)
  

  VM2

  -Drive C-> vmfs Datastore 1

  -Drive D-> vmfs Datasore 2

  
  IV ' e seen these link below no mention if need pyshical or virtual mode
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1005241
  https://pubs.VMware.com/vSphere-55/index.jsp?topic=%2Fcom.VMware.vSphere.storage.doc%2FGUID-D9B143D8-9F93-41D1-A32F-9FF4DE4CDF14.html
  
  3. can you multiple access by 5.5 ESXi host the same data store (located on a San) vmfs using the free version of ESXi 5.5?
  Can I use this in a production environment? I have seen some companies test this on a non-production environment. Technically, it works.
  
  Thank you
  Paul

  Welcome to the community-

  (1) as long as the DRS HA cluster hosts see data even warehouses there will be no problem

  (2) once more, also longer than the nose can see data warehouses including the LUNS as the RDM it home should be without issue.

  (3) Yes multiple instances of the free version of ESXi can access LUNS shared - Yes it can be used in a production environment, but remember you can not handle the free hypervisor with vCenter.

• Dual boot + virtual box or vmware

  I bought a new laptop with windows 7 Home premium.  I already got the dual-boot (despite the difficulties of the uEFI) with linux.
  What I want to do, comes from another partition (windows or linux regardless of the i begin) to be able to run the other inside the virtual machine.
  Both can start natively, but reboot can be sometimes annoying.  I know I can run linux with hardware acceleration (3d support and all) of my windows partition using the virtual machine;  But if I boot in linux (and this isn't a request on how to configure vmware or virtualbox, I'll figure that part out and you downloaded the documentation) windows 7 will throw a tantrum if it detects hardware vmware/virtualbox instead of normal material its expected?

  more precisely, whenever I have Exchange using windows 7 in virtualbox/vmware, to start in native mode, or vice versa, is there a need to call and explain to someone per square metre that my copy of windows is legitimate?
  (with windows xp, I think it would have been possible to use hardware profiles so I could boot natively virtually without m$ with a problem, but this feature seems to have been deleted.)

  my heart is not on assistance from vmware or virtual box, I have both and am willing to try a third option if recommended.  I just want to be able to start practically and start the same windows partition natively without having to call and activate on a regular basis.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  I hope this helps.

• InInstall ' 32-bit win XP' under ' 64 bit Win 8.1 "in a" Virtual Box"

  • I have my own old copy of Windows XP.
  • My current operating system is 64-bit Windows 8.1
  • I have some software that only works on 32 bit windows.
    • Can I install my 32 bit Windows XP in a "Virtual box or Machine" or "Hyoer-V" in a 64-bit Windows 8.1 environment?

  Yes, you can run Windows XP in Virtual Box or Hyper-V (if your processor supports).

  Windows 8 integrates into hypervisor called Hyper-V.

  This requires that your processor supports the translation of the secondary addresses.

  To see if your processor is supported:

  Press the Windows key + X

  Click on programs and features

  Click on turn Windows features on or off

  See if you can check off Hyper-V and all its options of void

  If this isn't the case, it does not support Hyper-v.

  You can use alternatives such as Oracle VirtualBox or VMWare Player.

  https://www.VirtualBox.org/wiki/downloads

  VMware Player;

  http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

• Como leer USB desde virtual machine in VMWARE ESXi 4.0?

  A cordial Saludo a todos.

  Tengo wont in a server the Vmware ESXi 4.0 platform, sober cual tengo una virtual machine en Windows Server 2003.

  Necesito UN por favor me indicandome como debo hacer para leer desde the virtual USB devices help machine Win. Server 2003.

  Desde el client Vsphere, ingreso a virtual machine of the Delcourt config, there are added el driver USB (ver imagen adjunta), pero ahun sigue sin funcionarme.

  Quedo muy atento a sus comentarios.

  Saludos.

  Para aquellos con VMWare ESXi 4.0 Estos his los comandos para fornuis 4.1, the gran novedad 4.1 are el soporte para Máquinas Office USB.
   
  De el addition of VMware ESXi en el sitio of mailing package. :

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vsphere_hypervisor_esxi/4
   
  ESXi 4.1 (change ZIP ESXi 4.0)

  The ultima version available

  A1 knew servidor con VMware vSphere client ESXi.
  Apague (poweroff) todas las maquinas office desde el servidor.
   
  Haga click derecho sober el arbol y poner ESXi a mantenimiento modo.

  UNA vez hecho esto, vaya has the config of VMware vSphere data of the client - datos almacen - almacen click on database "sober" derecho y push-button.
   
  Tenga into account that el anterior are 'SUFFER', haga click en el y luego undergo. Archivo zip en el almacen of data.
   
  El siguiente paso are al por Existing VMWare Server access.

  If ssh without esta en VMWARE habilitada, siga los pasos following in her console server:

  ALT + F1 para as aparezca algo in the pantalla, escriba "sin soporte.

  the root contrasena ingresar

  VI / etc / inetd.conf

  descomentar the line that contains parameters of the SSH los y el archivo save.

  REINICIAR el servidor.

  Ready, con el servidor enable Existing through SSH.

  Comprobacion del archivo:

  esxupdate - package = / vmfs/volumes/datastoreI/upgrade-from-ESXi4.0-to-4.1.0-0.0.260247-release.zipcheck

  If "Check OK", run the change:

  esxupdate - package = / technical vmfs/volumes/datastoreI/upgrade-from-ESXi4.0-to-4.1.0-0.0.260247-release.zip

  NOTE: este 'almacen of datos' are el number of su almacen of datos e caso, I can change number, entonces uno el

  LS / vmfs / Volumes /.

  Y ver el number that in su almacen of datos esta.

  Once completed the change, el servidor is reiniciara, por lo that connect acaba con el client of VMware vSphere, quitar el mantenimiento modo y las maquinas office.

  Important note:

  Run USB, las maquinas office debe ser version para el 7 y add el driver USB en the virtual machine if is is in version 4, the fuera Máquina virtual con simplemente haga click derecho in the part superior su version 7 of change.

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• VMware ESXi recebendo Máquina virtual Microsoft Virtual PC

  Pessoal,

  E possible EU catch uma imagem Microsoft Virtual PC para e converter VMware ESXi?

  Obrigado

  Good afternoon.

  You can use o VMware Converter Standalone para realize principle tal.

  A ultima versão e able to import maquinas tolls do Virtual PC 2004 or 2007 para o ESX.

  Segue referencia imagem.

  Att.

  Brahell

• Anyone run a Terminal servers virtual with VMware ESXi 3.5 If Yes please share your experiences?

  Hello guys,.

  We are runnig Terminal Server with Windows Server 2003 Ent in a cluster environment (TS 7), we plan to go with VMware ESXi 3.5 to virtualize the TS. Does anyone have any kind of experiences that can help make a decision?

  Thank you.

  Keep an eye on the side esxtop ESX and see your % RDY meters in this output.  Don't forget, as underlined chamon, with high vSMP values do not match always the best performance.  Typical scenarios citrix/ts use 1-2 vCPU for more effective results.  If you bump up to a larger number of users, you also want to watch the overcommitt on your processors and vCPUs in the box.  Many users a lot of switching and use heavy context on the processors for the management of the OS and the user.  1-2 vCPU seems to be the sweet spot.  What kind of applications are underway within the environment?

  -KjB

  VMware vExpert

• How to configure the IP address on VMWare ESXi 3.5

  Hi all.  I installed the VMWare ESXi 3.5 on a test to dedicate

  Server, assign a private IP = 10.10.1.10 to the VMWare box (this box has 2 physical NETWORK card); and then I

  installed the Symantec BrightMail 9.0.2 as a virtual appliance on VMWare ESXi

  3.5 to act as an e-mail gateway.  BrightMail installation goes smooth.  However, I am not in a position

  to connect to the Internet inside BrightMail 9.  I have installed BrightMail for

  have 2 virtual network card.  Network 1 (eth0) got the IP =

  10.10.1.11, network 2 (eth1) got the IP = 82.132.33.45 (real

  public IP address).  With this settig BrightMail virtual machine is able to talk with the other PC in my LAN, howerver, it can't go on the Internet.  My network configuration is as follows:

  A router (Modem, with the public IP address) is directly connected to the VMware computer (the first NETWORK adapter), and then the VMWare (second NETWORK card) connects to a switch where other LAN PC also connects to.

  My question is,

  1. from BrightMail runs on top of the

  VMWare, how can I BrightMail to connect to the Internet and to the

  Moreover, it connects to my LAN?  Currently the machine has VMWare a

  10.10.1.10 private IP assigned address.

  I'm a bit confuse about the settings of the network on the VMWare itself (I'm not the network

  Guy).  Any suggestion is weclomed.  Thank you.

  the observed range, vmnic0 resembles your DMZ LAN and vmnic1 is your LAN (172.x.x.x) you can check you have the right cable to the correct port?

  then you are supposed not combined two NICs in a single portgroup. you will need to do vmnic0 as a new vswitch with new portgroup named DMZ Lan and change that in the virtual network adapter machine virtual 2 to use the DMZ LAN as the virtual switch.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• BB10 Simulator on Vmware ESXi

  I'm trying to get the BB10 Simulator to work on a VMWare ESXi server. Here's what I've done so far:

  1. Installed the Simulator on yhe development machine, started VMWare workstation, open the vmx file and downloaded the VM on the ESXi server.
  2. Disabled 3D acceleration on the machine virtual (on ESX) and selected 'Full touch safe mode' after starting the virtual machine.

  At this point, the virtual computer screen displays the IP 'telnet ftp ssh qconn', the axis of the device and the build number.

  The next step is to connect the Momentics IDE to this virtual machine.

  The Simulator is in need of a vmx file configuration dialog box (likely to run vmware specific commands). In the configuration of ESXi, there is no vmx file.

  If I try to connect to the virtual machine by IP address, I need a device password, I did not.

  Someone at - it suggestions on what do I do now?

  In response to my own question because I found the answer:

  Now that I have the IP address, I just follow the steps described in

  http://supportforums.BlackBerry.com/T5/native-development/BB10-native-Cascades-SDK-not-connecting-to...

  Because I had never set up a password for the Simulator, I left the empty password field.

  Copy-paste the details:

  Of your IDE

  -Right click on your project in the Project Explorer

  -Go to Blackberry tools and click on configure target...

  -Click Add new target it... button and enter the IP address of your Simulator in the host name or IP address field, enter your password if you have one then click on finish

  To run your application on the Simulator:

  -In the Project Explorer view, double click on file bar - descriptor.xml, then click on chip Debug Set button to set the author of the application information.

  -Set the configuration of the correct version for the Simulator first by right-clicking on your project and selecting Configurations of Build > Set Active > 4 Simulator-Debug.

  -In the Project Explorer view, right-click the project and select build project.

  -Right click on the project again, and then select run as > BlackBerry Application C/C++.

• Impossible to apply license in VMWare ESXi 5.5.0 after the expiration of the evaluation period

  Hello. I recorded and downloaded VMWare ESXi and VSphere about 2 months ago and got it running on our server.

  Today when I logged with VSphere, he said the trial period is over and I need to get a license.

  I connected to VMWare and checked the download link of VSphere with the binaries for 5.5.0 ESXI and VSphere 5.5.0 and told me that I had not registered for the product.

  I signed up for the product and the files were available and I also saw the license key at the top of the download area.

  I copied the license key and went to VSphere, connected to my ESXi and click on Configuration, feature under license and change.

  I Clicked New Assign will authorize and pasted the license key in the box and click ok.

  Then I clicked OK to close the "assign license Dialog", but it came with and error "an error occurred during the license specified key assignment: license is not valid for this product".

  I tried several times and have not been able to apply the license.

  Help, please!

  Check if you used the appropriate license key. Make sure that you do not vcenter licenses for Esxi host. Error message clearly indicates that the license key is not valid for this product...

  Kind regards

  Suresh

• Is VMWare ESXi 5.5 free?

  
  I installed VMWare ESXi 5.5 and vSphere cleint test lab and what I see is a 60 day trial, how can I get a free version?

  As mentioned André you missed the stand-alone host licenses section.

  If you are too confusing, here are the steps

  To allow a standalone ESXi 5.x (vSphere Hypervisor):

  1. Connect to the ESXi host with vSphere Client.
  2. Click the Configuration tab.
  3. Click licensed features in software.
  4. Click change in the appearance under the license tab.
  5. Select assign a new license key at this host.
  6. Press enter and enter the license key.
  7. Click OK.