acrobet does not open my acrobet projects

Similar Questions

• Windows Movie Maker (version 2.1) does not open my .mswmm project.

  The WMM gives the error message "stopping" whenever I try to open this project.  I have Windows XP.  My project was started about 18 months ago, and I believe that WMM has been automatically updated since then.  I thought that an older project could be opened in a new version of WMM, although a more recent project could not be opened in a previous version.  I'd really like to reopen this project in order to complete and save, because I spent a lot of time to compile.  Would appreciate any help that can be given.  Thank you

  Hi ElisabethLee,

  1. did you of recent changes on the computer?

  2. are you able to create and save a new project using Windows movie maker files?

  3. do you have security software installed on the computer?

  Method 1

  Windows Movie Maker in Windows XP uses video and audio filters when you import, preview and record movies.

  I suggest that you turn off the video and audio filters in Windows movie maker and check if it works.

  To change the video filter settings

  (a) click on the Tools menu, click Options, and then click the compatibility tab.

  (b) in the list of video filters, you can enable or disable a filter by selecting or clearing the check box.

  Change the video filter settings

  http://Windows.Microsoft.com/en-us/Windows-XP/help/MovieMaker/change-video-filter-settings

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• The sketches app does not open, it tries then crashes... Several projects are being developed

  The sketches app does not open, it tries then crashes... Have several projects under development... Any suggestions?

  Hi Brian,.

  Really strange. Try to uninstall and reinstall the application.

  Let me know how it goes.

  Sue.

• CS 6.  Project failure PC does not open.

  Hi, I'm on CS 6. my PC has crashed in the middle of a project and now it does not open. the pop-up "this project cannot be loaded. "It may not damaged or obsolete items. I checked my auto save projects, but their last record 2 days ago. Is it possible to recover the project? Very much appreciated. Dan

  Create a new project and import the wrong project in the new project is the only thing that I've seen mentioned

• First pro cc 2015 project file does not open... displays the logo and says its loading but it never opens up to... There is two days. I reallly need to solve this... any suggestions?

  First pro cc 2015 project file does not open... displays the logo and says its loading but it never opens up to... There is two days. I reallly need to solve this... any suggestions?

  Hi Carl U.

  You have solved this problem yet? If not, please contact support here.

  Thank you
  Kevin

• New premiere pro version does not open a project because "it was recorded on a newer version.

  I was cutting on my laptop - using the updated version first pro creative cloud. Laptop too slow - so rented an office until I finished this concert. I downloaded the last aps creative cloud on the desktop, including the latest creation of cc pro. HOWEVER, it will not open the other project, as it says in an error message "the project has been saved in a NEWER version of the premier pro", but this version I just downloaded THIS MORNING, it is up to date. How can she have been registered on a newer version?

  Help me!

  Thank you

  Try to update using creative cloud.

• Dreamweaver does not open. Have a project due Friday and have to finish. :(

  When I worked fine lastnight, I noticed that when I tried to insert a spry menu in a new page I created, as Dreamweaver kept closing in on me. I will re-start, try again and the same thing will happen. So I just stop thinking that I'm just tired and don't get it.

  So I opened this afternoon to rework and the program does not open. It seems that this is the case, then it will immediately.

  I did the following:

  Restart

  Stop and try again

  total shudown

  restore the system to three days

  reload the software

  Still nothing. Any ideas?

  Here's a possibility

  http://www.mikepadgett.com/technology/technical/Dreamweaver-CS3-crashes-and-wont-start-up-Nouveau /.

  Also try

  http://forums.Adobe.com/thread/417116

• My first pro does not open. Other applications downloaded in CC work.

  Hello

  My first pro does not open, this is the only application in CC which makes it. How can I get to if open, I need it for a business project.

  Thank you
  CATIE

  I see only a Program files. This allows me to believe that your machine is 32-bit.

  First will not appear on a 32-bit computer. It must be a 64-bit computer.

• SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.

  I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.

  I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.

  I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.

  SP1 Windows 7 Professional 64 bit

  12 GB OF RAM

  2-Intel Xeon E5640 (16 sons) processors

  NVIDIA GeForce GTX580 1536 MB memory graphics

  PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.

  Problem solved!

  My Antivirus software was in the way. Once I have updated, things work fine.

  Thanks for your help!

• Adobe first 9 does not open

  Hello

  All of a sudden, I have problems with Adobe first 9. The Welcome screen opens, then when I click on "open a project"or"new project" it does not open. I used it a minute ago and it crashed and closed, then when I tried to open it again it didn't work anymore. I restarted my computer, but it will not always be open. I get no message of dysfunction, nothing, it does not open. The only place where I can go is in the Organizer.

  Can someone help me with this problem?

  lerochka

  What operating system runs your Premiere Elements 9.0/9.0.1? For now, I will assume to Windows 7, 8 or 8.1 64bits.

  Have you looked at the problem with and without the antivirus and firewall disabled?

  If you really want to delete the settings file, then follow these steps

  Local disk C

  Users

  Owner

  The app data

  Roaming

  Adobe

  First Elements

  9.0

  and in the folder 9.0 is the Adobe Premiere elements Prefs (file) file that you delete. If it does not, you delete the whole 9.0 folder in which the Adobe Premiere elements Prefs file exists. Don't forget to work with folder Option show hidden files, folders and disks active so that you can see the full quoted path.

  You confirm that you are running the program as the 9.0.1 update. If not, please download and install the 9.0.1 update from the following link Adobe rather than a project helps day Menu/set.

  Adobe Premiere Elements: For Windows: Premiere Elements 9.0.1 update

  Make sure that you run first Elements 9.0/9.0.1 and latest version of QuickTime from the account of a user with administrator privileges and that you also Run As Administrator applied to the Office for the program icon.

  If all else fails, do an another uninstall/reinstall, but this time

  a. Uninstall (the usual route of control panel)

  b. ccleaner Cross (regular parts cleaner and registry cleaner)

  c. reinstall with antivirus and firewall disabled

  In addition, if you are assured that your video graphics card is updated according to the manufacturer of the card, then delete the file BadDrivers.txt

  Local disk C

  Program data

  Adobe

  First Elements

  9.0

  and in the folder 9.0 is the BadDrivers.txt file that you delete. A new BadDrivers.txt file will be generated when you reopen Premiere Elements, but now the problem will be gone. Same comment on folder in the Adobe Premiere elements prefs file Option.

  Let us start here and then decide what then.

  Thank you.

  RTA

• Adobe AIR - creates disk image does not open

  Hi, I am trying to create a dmg file and does not open the image file. I work on a Mac and it's not the first time that I do this.

  The error message when I open the disk image is "Suite of disk image can not be opened" and the reason "not recognized".

  It's really weird, because it used to work and now for some reason any ceased. First I thought that it could be, because I compiled with the new SDK 4.0, but then I tested it with older SDK as 3.5, 3.8 and 3.9 and the problem persists. Old projects that worked fine also are no more building disk images.

  My system was 10.8 and I thought that the problem could disappear if I install the new Mavs, but after upgrading the problem is still there.

  Repair disk permissions and the file did not help also.

  Anyone has any idea what it could be? I'm really at the end of my knowledge.

  Thank you very much

  Solano

  OK people, finally found the problem. I use FDT and for some reason, FDT stopped to add the indicator -target native when compiling a native installer. I think that certain day FDT introduced this bug.

• PS CS5 "Print layout" dialogue does not open

  Hello: I feel through my Photoshop CS5.

  Accidentally, I created a 0 x 0 cm paper size and tried to print (up to this point Photoshop and Print worked).

  I now (always) get an error message: "there was an error in the opening of your printer... "

  Photoshop > file > print... does not open the Print Setup Page.

  Photoshop > file >print a copy (works, but always try to print 0 x 0 cm, spits it on a blank page printer).

  Using the application (Apple/Mac) 'Preview', I deleted the predefined paper size "0 x 0 cm".

  Apps; Preview, TextEdit, Mail, Word,... all print correctly (they can open the dialog box "print layout").

  I've set up two other printers (now three in total) and they work with all applications (except Photoshop).

  I've uninstalled and reinstalled Photoshop and my printers, including all their preference files.

  Also, I deleted again preference files in Photoshop by opening Photoshop while pressing "Shift-Opt-Cmd".

  In "System Preferences" > printers & Fax >Printers; I reset my computer "Printing System".

  I fixed "disk permissions', Start and also did several restarts.

  Since only Photoshop has a problem, I think that Photoshop has put (somewhere) a thought preference it is default paper size is 0 x 0 cm which is throwing an error and prevents the opening of 'Print Page layout.

  I've updated Photoshop Adobe Air, printers,... After you have reinstalled.

  I ran a software that erases caches of my computer.

  I reinstalled and updated my operating system (OS only, not my account and data).

  I would appreciate your help. Thank you, M_L_R

  Mac OS: 10.6.8 Apple/MacPro 2009, 2 x 2.93GHx 8-Core processors, 16 GB of Ram (DDR3 1066 MHz)

  Hello: I fixed my (Print: Page Setup... Panel of the dialog box does not open) problem.

  The fix was one of the many suggestions that I did research in the field "Adobe Help".

  Unfortunately, I rejected this solution (so far).

  Reference: http://helpx.adobe.com/photoshop/kb/error-install-printer-photoshop-cs4.html

  See > Solution 7: create another user account and run Photoshop under that user.

  Some of the procedures (below) will be may not be not necessary, but the main solution is there...

  Mac OS X 10.5 or later >System Preferences >accounts >guest account (share only) >Allow clients to connect to this computer >Automatic connection (for the administrator, always active - optional) > then log on (mainadministrator) account > then connect to the guest account > go to the applications folder (in the guest account) > open Photoshop > create a new simple document (example: create a text letter) >print... (in this case printing: Page Setup... the Panel of the dialog box is displayed [remember: that's the problem of the error in the main account]) > (do what you normally do) select your printer > set up a page of size options and printer >print. Save this project Photoshop > delete this Photoshop project > disconnection (of the guest account) > connect to your regular account (mainDirector) > the guest account can now be disabled (optionally) > open Photoshop (in your main account) > test print a simple document > the (print: Page Setup...) Panel now open dialog > (do what you normally do) select your printer > set up a page of size options and printer >print. Save this project Photoshop > delete this Photoshop project > the (Print: Page Setup... ) ( Panel of the dialog box does not open) problem is fixed. Bye for now, M_L_R

• HTML file does not open

  Hello

  Have a weird problem today.

  We use RoboHelp 5 to work.

  I opened a project help today and when I tried to open an HTML file, be it in the project manager, TOC, right click on a file and clicking Edition, the file does not open. He can't see in WYSIWYG or real Code.

  I tried with several different aid project and had the same problem. My boss had the same problem after only a few years back and rebooted just to make it work. I tried, but it did not help.

  Yesterday, everything was fine.

  If you can help me with this, it's greatly appreciated!

  Thank you

  JP

  Hello

  Probably just to affect the default editor will not be cut. You should also make sure you change auto to use by default as shown below:

  

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Final Cut Pro 10.2.3 does not open a library more!

  Hey! I could really use to understand this, a total mystery for help:

  This morning, I tried to open a library of Final Cut is saved on my hard drive. Last night, I worked with the library, but now it just opens up.

  It gives an error: Final Cut close unexpectedly

  It's just one that does not open it opens other libraries.

  Also, I tried to open it on another computer, but here it opens either.

  I tried Trashing FCP to the preferences Manager, made a first aid attendant, but it seems that the problem is in THE LIBRARY not in the program.

  In addition, NONE of the backups open.

  Any ideas? ;)

  Thank you!!

  Try to open the library of most recent backup.

  By default, they are stored in Final Cut backups in the folder sequences.

  Russ

• IPhone does not open messages, phone or contacts

  Does not open my iPhone 6 contacts, messages or phone, the phone crashes and returns to the home screen.

  Tincho94 wrote:

  Does not open my iPhone 6 contacts, messages or phone, the phone crashes and returns to the home screen.

  Press and hold home/sleep set button until you see the apple logo and then release, then wait for the boot device upward.

• Preview does not open

  Preview does not open suddenly.

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to preferences.

  com.apple.Preview.LSSharedFileList.plist. bring the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.

  If this does not work, perform a backup.

  Leave the preview.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder. Delete the following text. You won't find all. Restart and test.

  Containers/com.apple.Preview

  Containers/com. Apple.QuickLook.UI.Helper

  Preferences/com.apple.Preview.LSSharedFileList.plist

  Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist

  State/com.apple.Preview.savedState request registered

  Linc Davis credit for this solution.

  Overview of reset of the automatic download solution - part 3