VMware View 4.6 upgrade question

Similar Questions

• Ports and Destination for VMware View Client

  Hi all

  I'm looking for a quick bit of help if possible please...

  Environment: VMware View 4.5

  Question / Info needed:

  Two companies having a bond of trust between data transfer etc. and resources share. We need access to a site through their firewall in the bond of trust to connect to the VMware View VDI Office.  Customers using VMware View Client.

  The question is, if we get the site to enable port 443 to our broker connection I assume this will not be enough?  It must be possible to:

  443 to connection broker

  32111 (redirect USB) to?

  9427 (multimedia redirection) to?

  4172 (PCoIP) to?

  3389 (RDP if used) to?

  This may all sound a bit novicy but I need to be 100% before you go test.

  Thanks in advance.

  So using the brokers of the connection in direct mode without any security server.   I think that it would look like this.

  443 to connection broker

  32111 VDI Desktop

  9427 multimedia redirection) to?

  4172 VDI Desktop

  3389 VDI Desktop

• Implementacao Vmware View

  Good afternoon Colegas,

  Quero muito more a virtualizacao back offices aqui na empresa. E por isso gostaria testar o produto "Vmware View".

  Minha question e:

  O had I need start a testar este produto?

  Docks have os para did em um ambiente of testicles?

  SE puderem me help EU fico grato.

  Desde ja Agradea§o,

  Na truth os than Vcenter, composer, vconnection sao todos instalados no victory 2008 or 2003 mas use one infra Velho para Vsphere (ESXI) offices of bone

  Saulo Quinteiro Dos Santos

  Sistemas associate

  MPS Informatica Curitiba

  Bacharel em Ciência da computing - UFPR

  MSN: [email protected]<>[email protected]>

  Cel: 41-9927-5236

• DST and vmware view = weird questions

  This is the 3rd time that when the time comes or goes we get questions of kind of weird in our very frequent floating pools, VMs stuck in starting up, wait for connection etc.

  If you look at the log below you will see that the virtual machine has been one hour before, and then she came back at the right time.

  Anyone else seen elsewhere?

  2014 03-18 T 16: 06:36.553 - 04:00 INFO (016 C-0390) < Service main Thread > [wsnm_desktop] DesktopManager queue server is installed

  2014 03-18 T 16: 06:36.585 - 04:00 INFO 016c - 082 C < logloaded > [MessageFrameWork] "ws_filesystem - component of VMware View filesystem plugin" Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.595 - 04:00 INFO (016 C-0830) < logloaded > [MessageFrameWork] Plugin 'wsnm_jmsbridge - VMware View framework JMS Bridge Controller' loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.612 - 04:00 INFO (016 C-0838) < logloaded > [MessageFrameWork] 'ws_klog - plugin VMware View Kernel Log' Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.642 - 04:00 INFO (016c-0390) < Service main Thread > [wsnm] System Service VMware View begins

  2014 03-18 T 16: 06:36.642 - 04:00 INFO (016c-0840) < logloaded > [MessageFrameWork] "ws_perfmon - VMware View Performance Monitor and counter shop" Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.643 - 04:00 INFO (016 C-0850) < logloaded > [MessageFrameWork] Plugin ' ws_vhub - Service USB virtual VMware View framework "support, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.643 - 04:00 INFO (016 C-0848) < logloaded > [MessageFrameWork] Plugin "ws_thinappmgmt - support for VMware View infrastructure Application Management" loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.644 - 04:00 INFO (016 C-0854) < PluginInitThread > [ws_vhub] vhublib: initialized, VMware View virtual USB Hub API (64-bit) version: 5.5.0 build-966253, exit: unknown

  2014 03-18 T 16: 06:36.782 - 04:00 INFO (C 088-0890) < 2192 > program [MessageFrameWork] 'wsnm_jms - VMware View framework JMS bridge' began, version = 5.2.0 build-987719, pid = 0x88C, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 03-18 T 16: 06:36.806 - 04:00 INFO (C 088-0890) < main Thread > [] classpath option:-Djava.class.path=C:\Program VMware View\Agent\lib\; C:\Program View\Agent\lib\\agentjms.jar VMware; C:\Program View\Agent\lib\\commonutils.jar VMware; C:\Program View\Agent\lib\\events-client.jar VMware; C:\Program View\Agent\lib\\events-common.jar VMware; C:\Program View\Agent\lib\\gnu-crypto-2.0.1-1.jar VMware; C:\Program View\Agent\lib\\jdom-1.0.jar VMware; C:\Program View\Agent\lib\\jms-9.2.1.jar VMware; C:\Program View\Agent\lib\\jmswrapper.jar VMware; C:\Program View\Agent\lib\\log4j-1.2.14.jar VMware; C:\Program View\Agent\lib\\messagesecurity.jar VMware; C:\Program View\Agent\lib\\orchestratorj.jar VMware; C:\Program View\Agent\lib\\securitymanager.jar VMware; C:\Program View\Agent\lib\\sessionclientapi.jar VMware; C:\Program View\Agent\lib\\swiftmq-9.2.1.jar VMware; C:\Program View\Agent\lib\\v4v-msgserver.jar VMware; C:\Program View\Agent\lib\\winauth.jar VMware; C:\Program View\Agent\lib\\ws_appender.jar VMware; C:\Program View\Agent\lib\\ws_properties.jar VMware; C:\Program View\Agent\lib\\xercesImpl-2.9.1.jar VMware;

  2014 03-18 T 16: 06:36.818 - 04:00 INFO (088 C-08E4) < logloaded > [MessageFrameWork] "ws_javaview - VMware View Java Diagnostics Framework" Plugin, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.001 - 04:00 INFO (C 088-0938) < logloaded > [MessageFrameWork] Plugin "ws_java_bridgeDLL - VMware View Java Bridge Framework" loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.002 - 04:00 INFO (C 088-0934) < logloaded > [MessageFrameWork] Plugin ' ws_java_native - Framework Java native Support of VMware View "load, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.208 - 04:00 INFO (C 088-0890) < main Thread > [ws_java_bridgeDLL] JavaBridge installed service EventLoggerService

  2014 03-18 T 16: 06:37.208 - 04:00 INFO (C 088-0890) < main Thread > [] JavaBridge queue server is installed

  2014 03-18 T 16: 06:37.209 - 04:00 INFO (C 088-0890) < main Thread > [] View Composer agent has completed the customization

  2014 03-18 T 16: 06:37.737 - 04:00 INFO (0624-0628) < 1576 > [VMwareView-RdeServer] program "VMwareView-RdeServer - VMware View RDE 32-bit Server" began, version = e.x.p build-1190491, pid = 0 x 624, buildtype = release, usethread = 0, closeafterwrite = 0

  2014 03-18 T 16: 06:39.567 - 04:00 INFO (C 088-0890) < main Thread > [] View Composer personalization state 0 (0 seconds)

  2014 03-18 T 16: 06:39.673 - 04:00 INFO (C 088-0890) < main Thread > [java] bridge exe started ok.

  2014 03-18 T 15: 38:45.288 - 04:00 INFO (016 C-0128) < main Thread > [wsnm_desktop] Session created in WAIT state: id = 1, winStation = Console

  2014 03-18 T 15: 38:45.350 - 04:00 INFO (0488-0978) < 2424 > [MessageFrameWork] 'wssm - VMware View framework Session Manager' program began, version = 5.2.0 build-987719, pid = 0 x 488, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 03-18 T 15: 38:45.397 - 04:00 INFO (0488-0550) < logloaded > [MessageFrameWork] Plugin 'wssm_desktop - VMware View framework Office Manager Instance' loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.397 - 04:00 (0488-07 D 0) INFO for < logloaded > [MessageFrameWork] Plugin 'ws_winauth - taken in charge of VMware View infrastructure Windows Authentication", version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.475 - 04:00 (0488-05 D 0) INFO for < logloaded > [MessageFrameWork] Plugin 'ws_thinappmgmt - taken in charge of VMware View infrastructure Application Management", version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488-0978) < main Thread > [wssm] Session Manager has begun for the session 1

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488 - 0 to 28) < logloaded > [MessageFrameWork] 'wssm_uimanager - VMware View Host UI Framework' Plugin support, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488 - 0 B 40) < logloaded > [MessageFrameWork] Plugin 'wssm_ui - VMware View UI framework' loaded, version = 5.2.0 build-987719, buildtype = output

  I was on the phone with VMware for 5 hours Tuesday last with this same problem.  I ended up solving the problem without their help.  You must initialize your model, let the time updated, shut it down, take a new snapshot and recompose your pool.

  Re: View 5.3 - desktop blocked at startup

• VMWare View upgrade path

  I am planning an upgrade of the infrastructure VMware View:

  I have:

  VMWare View 4.5

  VCenter Server 4.1

  The upgrades of VMware View pdf I took I could go Virtual Center to 5.0 upgrade view, but looking at the http://http :// www.vmware.com/resources/compatibility/sim/interop_matrix.php , the VMware compatibility matrix, it resembles VCenter 5.0 and 4.5 view are not compatible.

  So, 2 options:

  1 - update VCenter 4.1. Update 1, then switch view to 5.0, then upgfrade VCenter to 5.0.

  2 - Uograde discovered VCenter 4.6, then upgrade to view 5.0, then upgrade to 5.0.

  Do you guys have any comments? Anyone tried an upgrade from VCenter 4.1 and 4.5 of the view?

  Thank you

  According to my upgrade plan guides are given beloww (and, please, tell me if this is wrong):

  1 discovers the connection to the 4.6-> 5 [same upgrade server] Server

  2 discover the composer 2.6 (see 4.6)-> 2.7 (view 5) [same upgrade server]

  3 view Center (and paragraphs as the Update Manager) 4.1 U1-> 5 [same upgrade server]

  4 ESXi 4.1 U1-> 5 [probably vmotion VMs / fresh install]

  Kind regards
  Milton

• VMware Vcenter 5 upgrade Questions

  Right now I have Esxi and Vmware Vcenter from version 4 to version 5.  A few questions:

  1. What is the easier and more average ordering to perform these upgrades?

  2 should I have Vcenter loaded on a physical host, or is that to make a virtual machine?  I currently have it as a virtual machine, but think it might be a problem that he won't be available for upgrades of the host on which the Vcenter VM is on.

  1. What is the easier and more average ordering to perform these upgrades?

  Make a backup of your DB vCenter, proceed with the installation of vCenter5.  Then, you can use VMware Update Manager to upgrade your ESXi hosts.  However, I would choose to do a reconstruction of working capital. vSphere5 is a major release.

  2 should I have Vcenter loaded on a physical host, or is that to make a virtual machine?  I currently have it as a virtual machine, but think it might be a problem that he won't be available for upgrades of the host on which the Vcenter VM is on.

  Virtual appointments, it is fully supported and you get the benefit of the HA/Dr

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-50-upgrade-guide.PDF

• Question of VSI/VMWare View 4.5 connection

  It is perhaps a silly question, but it is a question that I encounter.  I've set up a small test environment to try to test the capabilities of my server using LoginVSI and ESXi/VMware View 4.5.  I have a few VMs work and but when I went to start a test but I am running on an issue which prevents me from run LoginVSI.  The problem is that I seem to be only able to connect to a client in by pitcher no matter if I use the command line or from the client application to view.  It seems that I can make a pool by VM and try to do the test in this way with a user by the pitcher, but that seems to be a wrong way to use the pools.  Y at - it a specific setting I'm missing to allow multiple users to log on to the VMWare View Client by machine or is this an intentional design decision that cannot be changed?  Thank you.

  There is an unsupported command line that allows you to run more than one user per machine.   The command line variable is - standalone.   I've never used seen it mentioned in another post, http://communities.vmware.com/message/1655745#1655745.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• VMware View - provisioning question of desktop computers

  I'm new to VMware View and just build a my QA cluster environment.  I have installed/configured view administrator on a dedicated virtual machine and installed/configured on my server vCenter composer.  I created a gold statue (called, joined the domain, configured custom parameters, view agent installed) and converted to a model. Then, I created a pool on my server administrator to view and added 10 desktop computers.  They have all implemented successfully, however, they all have the same computer name (same name, I named the machine of the gold statue).  The machines that appear in VMware show the naming convention that I created, but the internal computer name is the same for all. I guess that the DNS name.  also, I can have these machines added to the announcement through this process or do they need to be predefined?

  Customization = None seems to be the reason. When we customize him clone all the related machine settings are kept from the model VM, which are the name of the Machine, machine SID, the work/domain group settings, etc. That's why you see Office all the same names as those given to the model. You can create a customization specification in the CR. Instructions to create a file of customiztion specifications in vCenter can be found at:

  http://pubs.vmware.com/vsphere-4-esx-vcenter/index.jsp?topic=/com.vmware.vsphere.vmadmin.doc_41/vsp_vm_guide/deploy_vms_from_templates_and_clones/t_create_a_customization_specification_for_windows.html

  Use this technique of customization when you create the pool. Hope that helps.

• New installation of VMWare View questions.

  Hello

  I'm testing VMWare View to see if it will suit our Organization.  I'm following the documentation and I get an error message.

  Currently, I have 2 guests.

  Host A - will be jobs

  Host B - servers.

  I created a Windows 2008 R2 server on host B.

  I created a Windows OR VMWareView

  2 groups VmViewAdmins & VmViewUsers

  I'm using the domain administrator to install and configure

  Host B

  -Installed and configured SQL Server 2008 R2

  -Installed views Comjposer

  -Installed view connection

  I go to view connection and try to add a server Vcentre.  I get to the end and when I click on finished I get the error "unable to connect. Check the settings and confirm the status of server and network. »

  I can't go there. Any suggestions?

  Thank you.

  Gary

  The connection broker is the view connection server.      vCenter is a required element of view please make sure that it is installed too.

• Questions about VMware View

  Hi, I need to provide always on desktops to remote 50 users. I have been using VMware workstation to provide these desktop computers, but it was a temporary solution that is quick and easy.

  I started by installing the free ESXi which works fine except that these virtual machines are running an application that requires DirectX. When reading information VMware views looks like it's maybe the solution I need, but I can't say if she can provide always on workstations or if desktop computers are provided according to the needs. My 2nd concern is cost. I don't mind spending the money for VMware View, but looks like I have to have seen running in AD and that it will require me to install many other products such as VMware infrastructure 3.5. Someone has some good links to install VMware View and the provisioning of desktops?

  When you purchase View 4.5, business or first, you get ESX and vSphere vCenter / I.  If you are supported on this part.  You don't need to buy that separately.

  With respect to reviews, the guides are:

  To start using the doc started get: http://pubs.vmware.com/view45/ol/wwhelp/wwhimpl/js/html/wwhelp.htm#href=get_started/t_getstarted.html

  http://www.VMware.com/files/PDF/VMware-View45-evaluators-Guide.PDF -> is excellent for your POC on VMWare View.

  http://www.vmware.com/pdf/view45_installation_guide.pdf -> installation guide.

  You will need to have Active Directory in your environment.  View is used to automatically configure your desktop to your users.

  If you use clones of link or local mode (the ability to check your workstations), then you will need to Prime Minister, Enterprise edition will be beneficial.

  Hope this helps,

  Larry

• Client VMware View Android: how hide the status bar at the top

  Hi all

  I'm testing the VMware View Client for Android. A question that bothers me is the status bar I am displayed at the top of the screen. I mean the bar that displays the Logo of VMware View and several icons for the control settings.

  Is possible to hide this bar? I have not found a switch in settings or in the official manual. The thing is: I think that it should be possible somehow, as a video YouTube of VMware shows: http://www.youtube.com/watch?v=85uJqkn-UV4

  I'll be grateful for any comments...

  air flow

  After upgrading the client to view to the last version(>2.0), he supports the mode full screen. You can activate it via clicking on the button full screen in the menu of the dock bar.

• VMWare View 4.6 dual screen error

  Question:

  VMWare View 4.6 process run on a laptop computer of company, with connected external monitor.  Start the display & choose multiple monitors. Starts fine & you can use both screens.

  However, when cell phone and it auto locks VDI, returns the user and their password. Both pop displays perfectly for a fraction of second (the two indidpendant on the other) but then displays update the position of the Office is in the center between the screens and you end up with a shared between the half of each screen, remote desktop effictivly centralize office.

  Only will is to login to vmware view and restore the session. Then, throw two screens independtly from each other.

  

  Action taken:

  Upgrade users view client to version 5 that actually no difference. Disable all screensavers etc, but the auto screen locks. View log files but can find no appearent fault.

  Please see the attached for reference log files

  I'd be very apricate any help because now I am at a loss.

  If you experience this problem only with PCoIP (and not RDP) then follow the Vmware KB 1027899

• Requires ESX VMware view?

  Hey guys,.

  This may be a very stupid question, but do you need ESX(I) to run VMware View?
  I guess you need to create a cluster of some sort to host virtual offices and
  I wonder if ESX (i) comes into play at all. Try to determine the future needs of license here.

  See you soon

  Yes, VMware view must either ESX or ESX (i) to install and also a Virtual Center to be configured and cluster to build with the ESX hosts, added to the cluster.

  With regard to the requirement for Vmware View 4.5 Lincense

  VMware View is always available in editions company and first and can be purchased as a package or as an add-on for those who have existing vSphere licenses to a separate purchase (which is not part of a set of view). With view 4.5, customers have a way to upgrade available to view Enterprise and View first modules to complete sets. Key updates include:

  • See Business Starter Kit and View Prime Starter Kit now includes VMware vCenter Standard for desktop computers (updated VMware vCenter Foundation for desktop computers).
  • View first beams, View first add-ons and View first upgrades include now the two new components introduced with view 4.5: vShield Endpoint and View Client with Local Mode(formerly known as Offline Desktop)

  You can get more information about the licenses and prices here

  http://KB. VMware.com/kb/1027460

  Thank you

  Buddy.

• VMware View and vSphere/ESX4

  I never tested with VMware View in any installation ESX so please forgive my ignorance on the subject.

  What I've read, I know that VMware View is not currently supported under vSphere but it should be later in the year.

  My question is: is it possible to run VMware View in vSphere/ESX4 and y at - it not crash you have experienced? I have a few clients who want to start a project with the product, but I'm tired to sell it to them without knowing if it is possible to run in vSphere or not.

  As I understand it, VMware View is just a series of virtual machines (View Manager for the management) and several other virtual machines for delivery of operating system invited to end users, so I think its possible to run, just not supported.

  Can anyone shed some light on this for me? Thank you.

  jjohnston1127 wrote:

  Thanks for the reply.

  Exactly how desktop computers are delivered to the end user? They give you a connection with the VI Client to vCenter and displays the available machines, they control?

  Display Client, Thin Client or View Portal (browser). Basically, we use RDP as the main Protocol for now (PCoverIP is the slate and many talked of the future Protocol). In simple terms, us tie in with the AD. The user connects by using one of the methods mentioned. The broker for connections check the user/pass, see what desktop computers - if any - they have right to and presents this list to the user. The user selects and then, if the SSO is enabled, records in their office environment. They have several desktop computers and screens (up to 4) if necessary.

  When the view is supported for vSphere and released, you know / think it will be difficult to migrate from individual offices shared through the clones related, or computers is - same not possible?

  God I hope not. For now, I have no idea, but I imagine they would create some sort of upgrade. View Manager is nothing else than a web application.

  I'm sure I think other issues later, but I can review the product documentation to answer most of them. I wanted to just grab a little better quickly because I have an appointment in an hour or two with a client

  Documentation has made a huge difference and give you a better idea of how this works.

  You want to make a difference in the future of VMware products? Feature to ask your ideas ( http://www.vmware.com/support/policies/feature.html )!

• Wyse V10L with WTS 6.3 and VMware View show

  Hi, just got the WTS 6.3 Wyse today and upgraded a V10L. Then entered the IP of our server VMware View, that meets our OK thin client device and presents us with a nice box of connection of VMware. I then enter my login details and I get the error "No. SUPPORT TUNNEL '...

  I can plug directly into the virtual machine in question using RDP in Wyse client, so assume its something to do with the SSL through the broker. Disabled the requirement for SSL and changed my broker on the device of Wyse http://x.x.x.x, (instead of https)-same error.

  Has anyone else seen elsewhere, or have any idea what is the problem?

  Hello

  Open the view administrator, select your display server, click on edit and activate (direct connection on the desktop)

  This is because the customer of Wyse ThinOS with does not have components of tunneling.

  You will need the option direct conect. The thin client connects to the Server View, authenticated, get its information session and after which connects via RDP directly on the desktop.

  Thank you

  Christoph