VMWare View slow slide windows when you use two monitors

Similar Questions

• When you use two monitors Media Player will not playback on screen #2 video (not a problem with the monitor #1).

  I'm sorry for the long post, but this is the type of problem that is easy to explain in person but if transported by writing it might take a little longer for the sake of the definition. Please read on without fear because this problem is not as complicated as you might think, I hope.

  I use two (2) screens of computers with the same system but why Media Player does not work on a single monitor and not the other monitor?

  I use two monitors with my PC thanks to the CLONE function and things last a lot. #1 monitor is a computer 19 "monitor. Monitor #2 is at the end of the piece. VIZIO, the manufacturer, markets a monitor #2 as a computer screen, nope, it's a 47 '' Vizio HDTV that I use as a computer screen. I use the installation without any problems for over a year now until yesterday. The problem: now, when I use two monitors to play a video, the sound will play but not the video. What I see is a black screen empty. This negative situation applies to only monitor the #2 and does NOT monitor #1.

  > very important Please note... when I have both monitors running and I play a video that you can actually see the video play on the #1, the 19-inch video monitor! There is absolutely nothing wrong with the video player when it runs on the small computer screen 19 inch. But when you turn your head to look through the living room where I Monitor #2 placed you won't see the video running on #1 monitor as you normally would before that dysfunction appeared. (No, instead of this you will see the Windows Media Player (or Nero or RealPlayer) readers 'playing' a black screen blank even if 1) both monitors are indeed cloned and 2) video plays without any problem on monitor # 1. Monitor #2 with media work (sort of) because the volume level is adjustable, and you can see the bar jump up and down and all around media player progression but the problem is that there is simply no video when you try watching the video on a monitor #2.

  > except to play videos through a Player multimedia, I can use my Vizio TV as a monitor for what is related to the computer, there is no another negative question. I can surf the web, edit videos, etc. When I run a video from Youtube to my computer the monitor #2 TV Vizio, the Youtube video plays well. Ditto for Netflix, no complaints there. In fact, I just typed this post on and displayed using Monitor #2... But if I want to watch a video that I saved in a folder XP then the only option is to use the #1 monitor.

  Thanks in advance for your help :)

  Do restore of the system as a first step. If this fails,

  1. uninstall all software of Monitor 2

  2. unplug the monitor 2

  3. restart the computer

  4. connect the monitor 2

  5. install all the software monitor

• How to choose the display by default when you use two screens on my Mac Pro?

  How to choose the display by default when you use two screens on my Mac Pro?

  The default view when you have several is made that you drag the little icon in the menu bar in this pane:

  

  .

• As you use two monitors, do HP27q 5 K or 5K AMD R9 295 X iMac-compatible UP2715K?

  Hi, I want to set up 5K double monitor with my iMac 5K (end of 2015, R9 395 X, 4.0 GHz i7 AMD, El Captain 10.11.1).)

  As you use two monitors, do HP27q 5 K or 5K AMD R9 295 X iMac-compatible UP2715K?

  Hi isykzh,

  Thank you for using communities Support from Apple!

  I understand from your question, that you want to use a second display with your iMac and would like another monitor. The following article, the UP2715K Dell would be sustained.

  Double-cable displays

  Some if poster with greater than 4K resolutions requires two DisplayPort cables to connect the screen at full resolution. With OS X v10.10.3 or later version Yosemite, 5K 27-inch Dell UP2715K display is supported on the following Mac computers:

  • Mac Pro (end 2013)
  • iMac (retina 5K, 27-inch, late 2014 and later versions)
  • MacBook Pro (retina, 15 inch, mid-2015) with AMD Radeon R9 M370X

  Use screens 4 K and Ultra HD TVs with your Mac - Apple Support

  Best!

• Cannot update files have point 8.1 of Windows when you use illustrator CS5.1

  A really weird problem started today.  I am able to open and work with the files have.  However, when I save the work, the original file exists, no not update work.  I closed and open the AI and restarted the computer.  But I'm still in the dark. Can I save my work under a new file name.  Hoping someone solved this problem without reinstall illustrator.

  Washio,

  I remember my having seen this (or similar) issue before, but I can't seem to remember the cause/solution.

  He could have (something on) the list below. "resettlement is the last resort 6). ((1-2) are easy and safe. (3-4) are on preferences, ireversibly and reversible. (5) is a collection of other options, some of which may be relevant.

  I also mentioned something on external downstairs, in case that can be taken.

  In any case, I hope that you report your findings, for each of us to know and remember (I hope).

  Sometimes, (some) things can stop working for no apparent reason. When (other) possible reasons/remedies do not work, it can be a kind corruption (temporary or permanent) that can be cured with something on the following list. It starts with a few easy suggestions and safe) 1 and 2) for less severe cases and continues with two 3 ways) and 4) preferences of the society (irreversible and reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how far to go.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

  External media: it is generally recommended here for open/save from/to clean hard disk and to copy to and from networks and removable media. You maybe lucky (for a while), but the chances of corruption of files and other unpleasantnesses are immensely greater when you use something else than the hard drive, and it is better safe than sorry.

  In addition to the (much longer) risk of file corruption, some issues are mentioned here:

  http://helpx.Adobe.com/Illustrator/KB/Illustrator-support-networks-removable-media.html

  To have a network really work requires little work.

  Make sure that you do not mix Mac and Windows on a network: you must use a Mac with Mac machines and a Windows Server with Windows machines.

  If you go through external means, it is always safer to zip/compress the file to avoid corruption.

• Problem with the pop-up windows when you use Safari

  Since Friday, February 12, 2016, when you use Safari, I get pop-ups on various internet sites.  Then I get a pop-up message for Massachusetts users to contact Apple Support @ 1 866 405 - 2214.  (http://www.ris4.com':).

  Use the EtreCheck to www.etrecheck.com and see what is running on your Mac.

  Perhaps you have Adware/Malware.

  But DO NOT contact this fake/Scam Apple support.

• When you use multiple monitors, my main screen goes to a lower resolution, and I can't change it.

  When I use "extend" the screen on my laptop resolution remains: 1920 x 1080, and the external monitor uses resolution of 1280 x 1024.

  But if I use "duplicate", the two screens are set to 1280 x 720 (despite being different for each screen ratios) and the resolution box is grayed out.

  In addition, for some reason, my laptop screen becomes poster 1 & 2 with the external monitor being 3. There are only 2 screens physically, however.

  How can I get the correct behavior for two copies?

  I know my monitors are not the same report, but I already used this configuration in Windows 7 on my old laptop with no problems. On Windows 7, the external monitor Gets a black bar at the top and bottom to restrict it to my laptop screen 16:9 ratio.

  It's the screen resolution window when I use "duplicate".
  

  When I use "extend" the screen on my laptop resolution remains: 1920 x 1080, and the external monitor uses resolution of 1280 x 1024.

  But if I use "duplicate", the two screens are set to 1280 x 720 (despite being different for each screen ratios) and the resolution box is grayed out.

  In addition, for some reason, my laptop screen becomes poster 1 & 2 with the external monitor being 3. There are only 2 screens physically, however.

  How can I get the correct behavior for two copies?

  I know my monitors are not the same report, but I already used this configuration in Windows 7 on my old laptop with no problems. On Windows 7, the external monitor Gets a black bar at the top and bottom to restrict it to my laptop screen 16:9 ratio.

  It's the screen resolution window when I use "duplicate".
  

  Yes...

  'Duplicate' will do it.  It is not "Duplicate" "sorta show the same thing on both screens.  ;-)
   
  Without third-party applications duplicate screens have the same resolution and the maximum resolution is the maximum resolution of the screen that has the smallest maximum resolution.
   
  Now - if you can be able to use the video device software full to make this (nVidia, AMD/ATI, Intel) in their more advanced control panel - that would be your application third-party in this case.  It would be under the ADVANCED above settings * if * you have installed.  I can't say what gave you what video card you have and if you have installed the complete drivers and the software of the manufacturer of the device or not - but I suggest you to do this and see if their advanced settings might help you.

• In the face of slow performance issues when you use Microsoft applications.

  Original title: The Office Windows and student 2010

  Windows is slow to opening any windows file (ms word, excel, windows live mail, etc.), and more when you type in one of these applications, there is a striking shift. I did all the diagnostics repair in programs and features, troubleshooting, disk cleanup, defragmentation, etc. I ' don't know what to do next. As I type this question, it is not a lag in typing. The striking shift happens in Microsoft products. The Internet Explorer search box works without a striking shift.

  Opening of MS word, excel, windows live mail is very slow. Once they open, typing accusing each other.

  Please let us know your problem is solved.

• Error output when you use multiple monitors

  I use an Acer Aspire One Windows XP.  I have an external monitor (CMV CT - 934D) attached.  When I send the signal of monitor for two machines, things works OK.  But when I use Fn + F5 and select the external monitor only, it shows "out of range".  The ides why and the solution?

  Hello Googasam,

  Thank you for your message.  Go on an Acer or your video website of the manufacturer of the card and download/install the latest driver for your card.  If your video card is after-market, go to the manufacturer for the latest driver, otherwise use Acer site.  Please let us know if it did or did not help to resolve this problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How to get out a window, when you use the main screen?

  When I'm in the MBR to 8 window and I opened a program like IE, how to close to return to the main screen. Some other icons are the same thing. I'm looking for a way to close it and return.

  I know that I can go to the lower left window, but did close these windows? Hope this makes since. I think that if I click on music it does the same thing. I can't end this one. I can find a break and other things.

  Maybe I'm not dragging my slider on the right side?

  Thanks, Bruce

  Bring your cursor to the top of the standby screen until you see the hand and then click and drag it to the bottom of the screen... Who's going to close an application and take back you to the start screen.

  Press windows + C which will open the charms of the right side

  Press windows + key X that will open a menu of useful type administration programs

  I hope that helps

  Brian

• PSE11 - can I increase the size of the preview window when you use filter > render > Lens Flare?

  Hello

  I am trying to create an image on the theme of Christmas in Photoshop elements 11.

  There are four candles in the image, and I want to add a subtle touch of light parasite the flames of candles.

  My problem is that the preview window that appears when I select the Lens Flare filter is incredibly small, and it is extremely difficult, if not impossible, to accurately position the effect:

  

  I noticed that some filters and effects have big enough insight or zoomable windows or even show the effect changing on the original image, but the preview for Lens Flare window allows any of these characteristics.

  As a rather cumbersome, I go through this procedure:

  • Create a layer duplicated my image and then hide the background layer
  • Select a small area of the upper layer around the spark plug/s
  • Select Inverse and delete the rest of the layer
  • CTRL + D to deselect
  • Now, if I select the filter, it displays only the small selection instead of the entire image
  • Add the effect of Len Flare/s
  • Display the background layer and Merge visible layers

  

  Please tell me there is a way to increase the size of the preview window, or a quick workaround better/more solution than what I'm doing now...

  Thanks a lot before any advice

  Steve

  A faster solution would be:

  1. Select the area you want to add to stray light. For example: in this case I would choose the candle using the marquee tool.
  2. Run the lens flare filter.

• Slow table indexing when you use a subroutine

  I wrote a labview code that extracts a range of data to an analog waveform. (3 options - last value only, all values or a specific range)

  I'm buying what I consider of large amounts of data (analog samples at 1 MHz for 20 seconds).

  I'm proceessing in a loop of consumer data and found that the functions of indexation has slowed to a crawl (~ by seek 100mSec).

  The slowdown is a linear relationship to the size of the array.

  My debug analysis concluded that, if I change one of my subroutines of code inline, the speed problem disappeared.

  Why is - this?

  My best guess is that Labview takes a copy of the table to send by the Subvi.

  I'm not editing data in the subroutine, is it possible to say LABVIEW not to do?

  Attached are 2 versions of my VI, prompt a Subvi online (sorry for the mess) others (slow) use the code as a Subvi.

  Criterion VI to create a picture of increasing size and measure search for table indexing time and the computer graphic.

  I'm using Labview 8.5.1

  iTm

  Long time user first time poster...

  Tim,

  You are quite correct.   What you might look into is recessing workmanship of your VI.  It depends on what you want to do with the final result.  Reentrant will solve this problem, but don't update the data on the front panel.

  See the following KB: differences between screws neres (Preallocate), incoming screws (part of Clones), VI models and Dyn...

• New page is not opening in a new window when you use a dynamic menu

  I read a previous post about this, but I don't really see a solution that I could implement. I have a dynamic menu, and I want an article on it to open a new image. Here is the code to the module of the model.

  {module_menu, version = '2', '901683' = Flash, moduleTemplateGroup = "Default"}

  It's the menu main template of the Tribeca site template.

  I tried to insert (_blank) under appropriate destination, and again, it opens in the same window.  I got together at the previous post that it was a matter of version, but as you can see, the code says "version 2"... or I misread that?

  I could not find the place where to make changes. The previous post suggested I'm looking for the CSS on the style of home, but I'm not using a house model.

  Any thoughts?

  Chuck

  You don't put _blank in the module, and that's not all the. Module. There is a folder named models module and which is used by default menu layout. You must ensure or create the target for the link element attribute and add the tags.

  You then add your _blank in the area of the tag for target in admin.

• Controls the size of the popup window when you use the target

  With the help of the anchor tag and attribute target (< a target = "_blank"... >), how one control the size of the new window? Or is that not possible? Thank you!

  Use javascript. If you want to put in the tag, then you can do it this way:

  assuming that your page is index.cfm, so:

  test link

  OR use the other tags such as

  test link

  If not yet know window.open, go to this link for reference: http://msdn2.microsoft.com/en-us/library/ms536651.aspx

• When you use the monitor in Windows 7 feature, I can choose which is my primary monitor, laptop or external monitor?

  I have a laptop HP which I use with an external monitor as your desktop put in place. I have no problem with the standard choice working about the poster. However, I would like to than the main office (Start menu and shortcuts) to display on the monitor external and my laptop at the extended screen display. I came across ideas in the research of the object, but most of them is based on earlier versions of Windows and not Windows 7.

  I have a laptop HP which I use with an external monitor as your desktop put in place. I have no problem with the standard choice working about the poster. However, I would like to than the main office (Start menu and shortcuts) to display on the monitor external and my laptop at the extended screen display. I came across ideas in the research of the object, but most of them is based on earlier versions of Windows and not Windows 7.

  Hey English2Go

  Here is the vista forums

  Try the forum Office windows 7 the link below

  http://social.answers.Microsoft.com/forums/en-us/w7desktop/threads?filter=AllTypes

  Walter, the time zone traveller