Compaq 15-s109ng

Similar Questions

• Compaq 15 laptop: compaq 15-s109ng

  Why this computer Compaq 15-s109ng, I can not instalier Windows 7...

  Hello

  The following assumes that you are trying to install a 64-bit Windows 7 version and the HARD drive has a Table of Partition GUID.

  Judgment of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

  Under the System Configuration tab, expand the Boot Options Menu.

  You must set the Secure Boot to disabled and legacy devices on " Enabled".

  When you're finished, press f10 and select this option to Save the changes.

  You will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

  Insert the Windows 7 installation disc and the laptop shutdown .

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to select the CDROM option (uefi) and press ENTER - if you are prompted to "Press any key to continue...". "- make.

  Kind regards

  DP - K

• pilot: compaq 15-s109ng

  Compaq 15-s109ng I need a windows 7 64-bit driver

  Hello:

  There are W7 x 64 drivers on the support on the link below page.

  http://support.HP.com/us-en/drivers/selfservice/Compaq-15-S100-notebook-PC-series/7234969/model/7633582

  If things like the smbus controller, usb and graphic doesn't work, use the G2 of 250 HP.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6431933 & swLangOid = 8 & swEnvOid = 4059

• USB: compaq 15-s109ng

  have a problem with the laptop usb doesn't know me and do not download from the Internet... and I can't open the USB... laptop is compaq 15-s109ng... windows 7 64 bit

  Hello:

  You have to plug your USB key in one of the USB2 ports until you get the 3 USB driver installed,

• USB port: compaq 15-s109ng

  I have a problem with the laptop usb doesn't know me and do not download from the Internet is a way to open USB... laptop is compaq 15-s109ng... windows 7 64 bit

  You must use one of the USB 2 ports, until you can install this driver.

  For the wireless network adapter, please do the following steps, so I can understand what model of laptop wireless card and then I'll post the link for the driver, you need to.

  Go to Device Manager, there should be a category of other devices.

  In this category, there should be a device labeled network controller.

  Please post the hardware ID of the marked device Network Controller.

  To find the hardware ID, click the network controller device.

  Then click on the Details tab in the upper part of the window of network controller device.

  Now you should see a drop-down list of property and it will be set to the Description of the unit.

  On this list and select the second element (Hardware ID).

  After the first string of characters you see in the window.

• Name - 2 or 3 good programs FREE to remove TROJANS from my old Compaq?

  Here's the situation. I have an old Compaq Presario V6000, working with XP. from now no budget for another computer. The place I'm in, just put hi speed connection.
  I want to get a FREE program to delete Trojans and would like to know, what you're suggesting? Thank you.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one. Windows 8 already has integrated antivirus.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• 1000N8601020-b: recover password for Compaq Presario PC

  How to find the password for a Compaq presario SR5710Y PC, which was given to me by someone who doesn't remember his password.

  Hello:

  If you are looking for the Windows password, unfortunately, I would not be able to help you with that.

  If you are looking for the power on password (BIOS), see the link below, last element (clear the BIOS settings) and inside this section, read the clearing BIOS password settings.

  http://support.HP.com/us-en/product/Compaq-Presario-SR5700-desktop-PC-series/3823953/model/3867472/document/c01237538/

• How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1-1007 D desktop PC

  How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.

  There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.

  On your desktop,.
  Right-click to select graphic properties->

  in display settings, click Advanced settings
  Here you go, you can do almost anything with the brightness

  Hope it helps

• Compaq mini cq10 bios password reset

  Please I need help to reset my password of bios compaq mini cq10 CNU0184TCN.

  Hello

  The unlock key is: e9l13uvae9

• Desktop Compaq with Windows 7 no reconnect to the internet after the awakening of the mode standby

  Info on the computer: Compaq SG3-150SC desktop computer, processor is AMD Athlon (TM) II x 2 215 with 2, is 7 MHz, bios American Megatrends Inc. 6.01, 23.4.2010 SMBIOS version 2.6, RAM is 4 GB total. OS is Windows 7 64 bit edition Home premium + service pack 2.
  
  ON THE PROBLEM

  This problem has happened recently. Once I turn on my desktop mode computer "sleep", it cannot reconnect to the Internet and I use only cable internet which computer is connected via ethernet to the cable-internet-modem/router cable. The computer seems to be able to view all available networks, but she was never able to connect to the Internet (after waking up from sleep). At the same time that the computer seems to have slowed a lot, I have no idea why, but I guess he's trying to reconnect to the internet and this process of reconnection is devouring its resources.

  I had other problems with this computer during this past year the half, but will not go into great detail with them now. These problems have been losing some dll. file that was ment to display the Win 7 great/normal devices connected to the computer, and a total system crashes / freezes after having updated graphics drivers AMD ATI Radeon 3000. However these problems seem to have disappeared after Windows 7 service pack 2 update. Also, I scanned the computer several times with a well-known and apreciated overall software security, no virus or other major security problems have been found.

  The only problem that seems to have the computer right now is just this question, I am trying to solve.

  Any suggestions to check and make what?

  Hello:

  A few suggestions, you can try...

  1. install the latest driver W7 ethernet of the Realtek RTL8105E ethernet adapter to your PC.

  Download, unzip and run the application configuration of the 2nd on the Web page below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  2. go in Device Manager, expand network adapters device category.

  Left click on the Realtek ethernet card.

  Click the power management tab, and uncheck the box to allow windows to turn off this device to save power.

• HP Compaq nx6610: power on password

  Hello

  I wonder is that someone could help me please with the power on password problem.

  I tried a few times to remove the battery CMOS even for hours but still not the same error.

  Any other suggestions?

  HP Compaq nx6110

  P/N: EK230ES #ABB

  I did enter 3 times and don't get that (*)

  @Skillie91

  Then SECURITY RIGOUREUSES is likely activated.

  

  I'm sorry.

  REO

• HP COMPAQ 6200 PRO SFF PC: Bus PCI 0, device 31, function 3 DRIVER

  I HAVE A PC HP COMPAQ 6200 PRO SMALL FORM FACTOR I KEEP GETTING MESSAGE ' CAN FIND DRIVER FOR CONTROLLER of BUS SM THE DRIVER IS: PCI bus 0, device 31, function 3 WHERE CAN GET THIS DRIVER? Thank you

  Hello:

  Download, unzip and run the file setup.exe from the link below... then reboot the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• driver for hp compaq 8200 elite ultra need driver for PCi and PCI simple communication controller

  HP Compaq product xz788ut #aba

  32-bit Windows 7 profesional

  delete the original version and install our Win7 32 bit

  a 320 employees

  Hello:

  Who says it's the AMT driver that is necessary is what I gave you.

  Try the IMEI.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = VC-93346-1 & mode = 4 & IDX = 1 & prodTypeId = 12454 & prodSeriesId = 472276

  Paul

• SPDIF out on Compaq CQ40-122AX

  I have a Compaq CQ40-122AX, running VISTA home basic sp1.

  There IDT High Definition Audio built in and a HDMI output. He also says that it will be an available SPDIF output using a HP/Dock. Now, I'd like to use the SPDIF output, but I am reluctant to by the docking station for £200 as advertised on amazon. In the options for the Soundsetup there is a definition available also SPDIF.

  IDT HD Audio Codec driver version: 1.0.5934.0

  For IDT HD Audio DEVICE driver version: 6.0.6000.16386

  Only the input/output Audio/video are:

  VGA

  HDMI

  Headphone 3.5 mm

  Microphone 3.5 mm

  I had a browse autour and found that some HP models spdif output available via the Jack 3.5 mm as optics, when the adapter is plugged it activates an LED inside and that it moves the optical signal to the Toslink cable.

  Adapter cable and optical at Maplin

  My question is, the SPDIF is accessible on my model of laptop CQ40-122AX with this configuration without the HP docking station or could there be another way? Since there is not in there, it must be possible to access it somehow, and the docking station just seems too expensive to make sense.

  Look forward to hearing responses.

  Message edited by Sven on 18/01/2009 05:27
  何思凡
  
  Compaq CQ40-122AX, Vista Home Basic 32 bit, AMD Athlon x 2 1.9 Ghz, ATI Radeon HD3200, 1 GB of RAM,
  
  -Each one favor Post back your results, resolved or not - LET BRAVO!

  No solution is presented using computers laptops, built in the ability to use SPDIF for DD and DTS streams. The only solution that I found satisfactory is the external soundcards next via a USB port.

  I use the product bought in Hong Kong, works well with XP and Vista, that's what I tried ebay. The least expensive solution to the s/PDIF output, I found. It is an optical output.

  http://CGI.eBay.co.UK/5IN1-USB-6-channel-PCI-external-moveable-5-1-sound-Card_W0QQitemZ220338593076QQcmdZViewItemQQptZUK_Computing_ComputerComponents_SoundCards?hash=item220338593076 & _trksid = p3286.c0.m14 & _trkparms = 72 %3 A 1300 | 66 %3 A 2 | 65 %3 A 12: 39 %3 A 1 | 240 %3 A 1318

  http://www.Google.com/products?complete=1 & hl = in & q = USB + to + Converter + SPDIF & um = 1 & ie = UTF-8 & his = X & OI = product_result_group & resnum = 5 & CT = title

• Compaq Presario SR1150NX: Error, disk Compaq recovery dead

  Hello, I have a desktop Compaq Presario SR1150NX of 2005. Everything works well in it and we emptied dust not for long. But then, one day I went to start it it says a critical system file was missing. I'm confused at first. After half an hour, creating a USB disk only to find it didn't work, I then had to use the Windows XP Recovery Console. Then after I fixed it it still didn't start because it couldint find the file. But when I start the computer, it shows me that, if I press F10, it boots into system recovery mode. OT started and told me that I could boot into windows xp system recovery. But in the middle of this, the computer overheats and shuts down. When I tried to turn it on again it gave me a disc error AND when I boot in recoervy, it's just bluescreens. Now when I turn on the computer, it does nothing.

  Is there any where where I could download a recoervy tool to open the hard drive in order to get the data on the drive and get a new drive? Or get a Windows recovery disc?

  Any help is the Apprecited!

  Remove the disk from the desktop.

  Buy

  USB 2.0 for HDD SATA/IDE adapter 2.5/3.5/5.25IN drives w / adapter

  See: http://www.ncix.com/detail/usb2-0-to-sata-ide-drive-adapter-a3-17762.htm

  and connect your hard disk with this adapter to a USB port on your computer.

  When you connect, Windows will ask your permission to run 'check disk' ('CHKDSK') to review and fix any problem of file system.

  I think that the corrupt currently-system files on the hard drive is causing startup problems you reported.

  Re-connect the desktop "repaired" disk drive, and then try again.