VMX file is corrupted after installing Fusion 6 and Windows 7

Similar Questions

• After installing LR6.2 and 6.2.1 why system (iMac) is too slow?

  After installing LR6.2 and 6.2.1 why system (iMac) is too slow?

  Hi only1tu,

  Have you tried to reboot the machine.

  otherwise try to disable the GPU in the Lightroom preferences.

  Go to the menu of Lightroom

  Click on Preferences

  Go to the performance tab

  Uncheck the GPU

  Restart the Lightroom.

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Fusion ".pdx file is corrupt" after Time Machine restore - MacOS 10.10.4/Fusion 7.1.2 Please help!

  I'm under Fusion 7.1.2 on Mac OS 10.10.4 Yosemite and have a virtual Windows 7 machine. I recently had my hard drive of 3T, replaced by a reminder of Apple. After restoring my Mac Time Machine, I get an error message ".pdx file is corrupt" to this virtual machine when I try to start a merger. Windows 7 will not start. I searched the forums and do not see a solution. Can someone help me with this?

  Don't know what was the cause, but please delete the last line of the virtual machine configuration (.vmx) file. For some reason any file with a truncated line ends ""/library/settings ": No such'which causes a syntax error when starting." Please edit the file with merger closed, so that the file is reread after manually editing.

  André

• all downloaded files are corrupted / custom install

  fresh WinXP install again 500g driveASUS MB A8N - SLI ATHANLON 64 3500 + PROCESSOR amd

  All downloaded files are allegedly corrupt, which means no browser updated (using IE6), no antivirus, nothing.

  No matter what thouhts?

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +: 
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• MAX 14.0 broken and database corrupted after installing the latest drivers of device and LV2014

  I have LV2012 and 2013 (both 32-bit) installed on my system Win8.1 64-bit and you used without problem.  I recently went through the agony of installation LV2014 32 - bit Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work.  First of all, it is slow to fill the display of system information, then when I try to develop a tree I get a MAX database connection error (see table) and there is no software listed at all.  Third, devices are not listed correctly even if appearing in Device Manager (eg. a CAN interface is no longer lists CAN0 but shows the device but no configuration, even for devices USB DAQ I(see attached), and I CAN installed 14.0), and there is nothing in the data area.

  The first attempts to install LV2014 were prevented by the mDNS NOR answering machine and without stopping when required by Setup of services.  This also affected attempts to fix the MAX.

  All 3 versions of LabVIEW run OK, but projects include more distance or RIO/FPGA hardware - perhaps because of uninstalled software - but without the list of software to MAX, I can't say what is and is not installed.

  I did a reset Configuration data, fixed MAX several times, uninstalled (all the all dependencies), activated the firewall and antivirus and completely reinstalled LV2012, LV2013, LV2014 and device drivers, but without touching the problem.  I have now lost 2 whole days and I start to desperate for a solution.  Surely this can not be the only case of this in the world.

  Mike

  CLD & Alliance member, UK

  Hi Mike,.

  The link below is what you will need to follow to remove the Corruption of database of MAX. It is a removal tool 'automate' the data removal process. . The second document below are the steps for the traverse removal tool.

  MAX Database Corruption removal tool
  https://decibel.NI.com/content/docs/doc-12805

  What is the process of removing MAX Database Corruption
  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  I highly recommend using the removal tool, as it will do this process for you, you will just need to follow the guests who come to the process.

  Concerning

  Mark

• IdeaPad 100 s-11IBY problems after installing the update of Windows 10 anniversary (aka version 1607)

  Yesterday, my 11IBY-100 s installed update 10 birthday Windows (aka Windows 10 Version 1607). Now, it has multiple problems and is unusable.

  1. the keyboard (Yes, the built-in keyboard) does not work. None of the keys (letters, numbers, 'actions' as BACKSPACE) work not at all. If I plug in a USB wireless keyboard, it works fine. So maybe there is a problem with the device driver for the built-in keyboard with the update of the anniversary. The keyboard works perfectly until Windows Update installed upgrading birthday.

  2. the trackpad is not working. If I plug in a USB wireless mouse, it works fine. So maybe there is a problem with the device driver for the trackpad with the update of the anniversary. The trackpad has worked very well until Windows Update installed upgrading birthday.

  3. the Kingston 32 GB microSD card plugged into the microSD port is not recognized by the file Explorer. If I plug the 32GB Kingston microSD card in a USB microSD card reader and plug the card reader into a USB port, microSD storage is recognized in the file Explorer, so the microSD itself is fine. So maybe there is a problem with the device driver for the port microSD with the update of the anniversary. The microSD port works great and the micro SD card has been recognized in the file Explorer until Windows Update installed upgrading birthday.

  4. There is no audio data, Windows now indicates that no audio hardware is installed. So maybe there is a problem with the device drivers for the builtin microphone and the built-in speaker with the update of the anniversary. They worked fine until Windows Update installed upgrading birthday.

  I tried to do a RESET, but unfortunately although the reset worked, it resets Windows 10 Version 1607 (aka anniversary update) not an earlier version of Windows 10 and I still have all the problems above. Far as I can see, the Windows settings now say there is no history of update and no previous version of Windows, so I can't use any method of recovery which is available on the PC itself to go to an earlier version of Windows.

  Please can someone advise how to reset my PC (and where I can get the 32-bit Windows 10 appropriate ISO file or other) Windows 10 Version 1511 (i.e. before the update of the anniversary)?

  Or, Alternatively, device drivers are valid for Windows 10 Version 1607 for builtin keyboard, trackpad, port, microSD, microphone and speaker available somewhere? I can't see on the Lenovo Web site.

  Ron

  On the Lenovo site, in "Drivers and software" for this unit, there was a "Chipset" called driver «Intel platform driver for Windows 10 (32 bit) - Ideapad 100 s-11IBY» I downloaded and installed, then after being invited, rebooted the device. I am pleased to announce that

  the keyboard now works

  (b) the trackpad works now

  (c) the microSD card is now recognized by the file Explorer

  (d) the audio now works

  Ron

• After installing new FN and multimedia keys do not work on Qosmio F20

  Hello, my friend buy Qosmio F20 of the Germany, but it comes with Windows Xp with the German language on this subject. I format the hard drive and install Windows Xp Professional SP2. I download all of the drivers who was very available and most of the functions work (like display, sound, touchpad and others), but the multimedia keys and the FN keys do not work (remote work). The other problem is that I can't install the TV tuner.

  With German Windows XP, I try TV tuner but have no SOUND what is the problem? When I try to install the utility software under display appear message that says "Unable to get the information from the BIOS" or something comparable. I have install all the drivers that I found in the Qosmio F20 support page but I have video control with exclamation mark in Device Manager.

  Can you help me?

  Where am I wrong? What should I do?

  First of all he must know that if you are going to install together the Toshiba drivers after installing the OS to do in the right order!
  On the Toshiba driver page, you will find the Installation Instructions. You will need to follow the guide line! It is important to properly work all the functions!

  In addition, you will need to select the right OS. There are two: XP and XP MCE.

  To control buttons Toshiba works correctly, you will need to install the controls.
  But as I said above: follow the instructions in the insulation.

  A few words on the TV tuner:
  As far as I know, you can only use the TV tuner in the country where the laptop was purchased because different PAN and NTSC settings.
  In addition, the TV tuner driver offers TV tuning and recording capabilities using Media Center on your computer. If you have any MCE so I put t know how you want to watch TV.

• After installing Ubuntu 11.04, Windows Vista has disappeared.

  Original title: Windows vista is missing

  After installing Ubuntu 11.04 (Natty Narwhal) my other OP system Windows vista has disappeared. I don't get a menu to choose which OP system I want to use. The grub menu 2 does not include an entry for windows. My computer directly boots into Ubuntu. I tried to put the installation disc in the status bar to try to recover the system but nothing works. Can someone help me please? Isetta cordially.

  Hi Isetta,

  It seems that after installing Ubuntu, grub 2 took control of Boot Manager and changed the boot sequence. To change the startup entries to get Vista, you must contact Ubuntu for assistance on changing the grub boot entries 2.

  You can see the following link to get in touch with Ubuntu.

  Ubuntu Forum

  Hope this information is useful.

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• shows am improve ready system me ready start Hello, after installing "Setup for the windows modules" my pc one slowed down at the start. That do I do? Thank you.

  Hello, after installing "Setup for windows modules" my pc one slowed down at the start. That do I do? Thank you.

  Hello Turkish styleozdemir.

  The forum in which you've posted is for English only. Please select your language by clicking on the globe on the page down to the left to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx
  Thank you!

• 500 error after installing the CF on Windows Server 2008 IIS7 9.0.2

  After installing the CF 9.0.2 on Windows Server 2008 with IIS7, I get an error 500 return of all my websites.  I made sure to change the permissions in the C:\ColdFusion9 folder to full control for psaadm, psacln.  I'm sure that CGI, ISAPI extensions and ISAPI filters are installed.  I rebooted.  I can access the administration of CF on the server, but all of my websites are generating 500 errors on remote browsers.  The uninstall does not solve the problem.  Help, please.  What can I do?

  Problem solved!  It was related to incompatibilities of 32-bit/64-bit with Plesk.  There are two steps to solve this problem:

  1 snap the Internet Information services manager, access the properties of the advanced application pool and enable 32-Bit Applications 'false' for plesk (default) (2.0) (pool) value.

  2. in Plesk, disable the Web statistics (accessible via password protected directory ' / plesk-stat/webstat /')

  Note that you will not be able to use the functionality of Plesk protected directory until Plesk solves this problem.

  Complete in writing to the top of the solution by AndorA in Plesk forums can be found at: http://forum.parallels.com/showthread.php?t=262903

  Andor thanks!

• problem reinstalling FB4 bonus after installing CS5 MC on windows 7 64 bit

  Hello

  I was hoping I could get help with a problem: I filed a technical request (ticket) with Adobe but I also wanted to reach out here.

  Background:

  I installed FB4 Premium in March and had no problems with the download or installation - everyhting worked very well. Yesterday I installed CS5 MC and installing it wrote debugging flash player versions that come in FB4 premium with standard flash drive too. Of course, that won't work with FB4 so I need to find a way to reinstall the debug version of flash player plugin and active x. After trying in vain for so that to do this, I decided that it would just be easier to uninstall and reinstall the FB4 download which I still had on my machine, as this comes with players of debugging that I need. Big mistake. Now, I can't reinstall FB4. I get the following error messages when executing the installation set-up (see downloaded the error message below image). Any thoughts on how I can fix this? I tried several reboots, installations and even re-downlaoded FB4 again from the Adobe store. It seems that the MC5 presecne caused this somehow? I'm running windows 7 pro 64-bit. Moreover, I understand how to reinstall the flash debug player-(too late) I should first run a script to remove the existing flash rather drive than to simply uninstall it. If someone needs the script or help on this made me know.

  Hanks a lot - it left me speechless.

  Bob

  

  Hi Bob,

  CS5 MC includes FB4, so after MC is installed, it is not necessary for installation FB4 separately.

  The standard compared to the Premium editions are controlled by the various SNs:

  -If you are in CS5 trial mode, you will always be in mode Premium for FB4

  -After you have applied a MC CS5 serial number, you will be in mode Standard for FB4.

  [Side: I agree that MC should include award-winning FB4 instead of the standard, but that's another story.]

  If you want to upgrade to premium Standard FB4, there are master instructions for how to do this posted here (among others):

  http://forums.Adobe.com/thread/630566

  -Chris

• No sound after installing the driver on windows 7

  I installed on my computer and when I install Windows 7 Ultimate all my drivers except for the sound. I have a Sound Blaster Live sound installed card and I found a driver for it, the driver is installed but there is still no sound and windows tells me there is no problem. Please help in any way. the driver that I use is a Vinyl AC97 Codec Combo Driver.

  Hi gnuttyone:

  Please check this:

  Select Control Panel > under sound select manage audio devices > see if "Speakers" have a green check mark (designates the default setting).  If another audio device is enabled, try checking "Speakers" and set as a default device, then click on apply.  See if it works then using these card drivers the Win7 built-in.

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• Problem installing Real Player and Windows Media Player

  I go online and download real player and windows media player. When I try to install, I get a message that tells me that they can not install unless I'm onlline. I'm online. I click try again again and again and re download again and again. Whenever it is the same thing. Just does not recognize that I am online. What can I do?

  Hello

  1. what version of Windows are you using?
  2. What is the exact error message?
  3 did you changes in the computer before this problem?
  4. what version of Windows Media Player you are trying to install?
  I suggest you run the fix it from the following link, restart the computer, try to install a drive and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651