VNC connection

Similar Questions

• LRT214 + LAPACPRO1750: Configure to allow VNC connections.

  Greetings:

  Background:

  I'm working on a small network that uses a bunch of macintosh computers. They have a comcast business portal, which they have LRT214 connected as well as a DMZ if the firewall is down and all traffic goes to the LRT214.

  Macs to connect to the network through the installation of the LAPACPRO1750 program in a cluster.

  Problem:

  I am trying to configure each mac to use the software Edovias screens connect and screens to the installation with each mac VNC connections. I'm trying to configure NAT correctly so that macs will connect. I don't know the steps.

  I think I need to configure a port forward, and also a port address translation, but I don't understand exactly the purpose of each or where everything has to go.

  Hoped for solution:

  Referall to positions that will help me to understand what makes each module, and how to properly fillout every module.

  If I understand your post your port translations are getting more mounted? If so, then the only way this can happen is a device on the local network is to configure the Router UPNP screws. Either disable the software on the client or the UPNP disabled in the LRA. The router must be restarted in order to clear the prot trans created UPNP.

• HDMI will Dim without VNC connection

  Hello

  I have the following configuration:

  Mini Mac (i5, El Capitan) - HDMI--> B & W Panaroma 2-(HDMI)--> Samsung TV

  I'm mainly Plex Home Theater running on the Mac mini and control everything with a Logitech Harmony Hub via Bluetooth.

  I recently installed at El Capitan from scratch on the Mac mini - for this by adding a mouse and a keyboard.

  Once installed, I made sure the remote screen works fine, detached from the mouse and keyboard and used builtin VNC ("screen sharing") on my Macbook to connect the Mac mini-> works like a charm.

  Now the problem is: as soon as I disconnect my connection VNC, the TV screen (or the HDMI port Mac mini also) will Dim. Only to come back as soon as I have vnc in the Mac mini again.

  I had this work without problems with Yosemite until I've updated / fresh install...

  Any ideas? I searched the internet, but nobody seems to have a similar problem.

  See you soon,.

  Andreas

  Hello

  I have exactly the same problem with the same configuration after the upgrade to El Capitan.

  And with 3 iterations of updated OS down the line and no response to this post, it doesn't seem like there is no interest in the problem!

  If there is anyone who has found a solution, please post it here...

  See you soon,.

  Christian

• How do I allow VNC connections?

  I'm trying to open a port, but after IV ' e done that, when I go to canyouseeme.org, he says there can not see my port. And is performing in the internet for a solution, I read that I should "make sure that any software firewall or antivirus, you have installed are configured to allow connections VNC."
  PS: I have disalbled my firewall and antivirus and still does not work

  If anyone can help?
  Thanks in advance!
   

  If when you turn off the antivirus and firewall and it won't work, it means problem is not related to the anti-virus or firewall and this is something else.

  In general you can add programs in the list of exceptions for Microsoft Security Essentials if you do not want it detects malware.

• Shado task does not connect to the Thin Client

  Trying to hide a T520 on HPDM 4.6SP4 thin client, when I run the task of shadow, I retrieve a VNC connection on the server HPDM and not the thin client. T520 thin clients are ThinPro 5. This happens on the T510 Smart thin clients zero Core as well. I'm guessing there's a conf file that may have a value defined by mistake, but didn't find it.

  Dear customer,

  Welcome and thanks for posting your query on the Forum from the HP Support

  Looks like you are facing difficulties regarding the task of the shadow copy in the HP Device Manager

  1 shadow task uses the built in VNC server for the HP Device Manager software

  2. If you have installed a separate VNC software on the server of HPDM, there could be a conflict

  3. also please check under "services.msc" to find out how many services VNC running concurrently

  4. If you find that several services VNC please disable those who is not necessary

  5. Please goto Add / Remove programs and uninstall VNC Viewer is installed separately

  Hope this helps, for other queries in response to the post and feel free to join us again
   
  * Click on the button white Thumbs Up on the right of say thank you *.
  Make it easier for others to find solutions by checking a response "accept as Solution" if it solves your problem.
   
  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• Photoshop 2015.1.1 crashes on closing

  Dear support,

  I have a problem with Photoshop 2015.1.1

  When I close the PS appears an error in the application crash.

  How AI that can solve?

  below you can see the error

  Firma problema:

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 16.1.1.327

  Application timestamp: 5667fb90

  Nome modulo con if: vnchooks.dll

  Versione modulo con if: 1.1.0.0

  Timestamp modulo con if: 525ad4cf

  Exception code: c0000005

  Offset exception: 0000000000001df2

  SO version: 6.1.7601.2.1.0.256.48

  Locali impostazioni ID: 1040

  Additional information 1: 219f

  Further information 2: 219f04e01614e3e3d81be2b5f6ceacef

  More information 3:0725

  More information 4: 07254330e1126711d4079460daf51e04

  Leggere informativa sulla privacy online:

  http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0410

  SE informativa sulla privacy online no e disponibile, quella leggere offline:

  C:\windows\system32\it-IT\erofflps.txt

  I try to add sniffer.exe and Photoshop.exe on 3d Nvidia preferences option (I have a NVIDIA QUADRO K4000)

  I try to rename the libraylookupfile

  I try to remove all the PSP on CC Photoshop C:\Users\Username\AppData\Roaming\Adobe\Adobe 2015\Adobe Photoshop CC 2015 Settings file

  but the problem is still

  Please, you have any other suggestions?

  Thank you very much

  Concerning

  Davide

  Sorry, I found the solution

  It's the fault of UltraVNC, when I am connected to this pc, photoshop crashes when closing... If there is no VNC connection PS works fine.

  I hope that this post will be useful for someone.

  Concerning

  Davide

• Access to the operation of the virtual machine guest inside the work-6: 5 on the Internet

  Hi friends,

  I can access virtual (guest computers) running in VMware Workstation 6.5 - 7 on the Internet with vnc viewer? OR with another method.

  Means I want to VM is accessible on the Internet either through "mstsc" (RDP) or "vnc viewer" / If there is another way to do it then pl can help me... "."

  Rishi Sharma | MCSA (Messaging), MCSE, RHCE, virtualization

  The free is enough, just register, install Logmein, add your virtual machine to your account and immediately, you can manage your VM via internet from anywhere. But of course, Pro version included more features. See the comparison

  If you want something more technical, then get:

  (Internet-> IP / domain-> router-> VM)

  1 - IP (dynamic IP use freedns.afraid.org to resolve the field fixed

  2 - port forward on your router for RDP / VNC port to your internal VM (use to recommend different port)

  Note: To add a kind of secure access to your rdp/vnc connection, you can use "openvpn". To do this, you need to port your VPN port forward rather RDP/VNC port so lazy to install, you get just appliance here openvpn server and run it from your desktop/server VMware.

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• ESXi installation to access Public Site

  New in VMware communities, so go easy on me.

  I want to throw execute them an idea for a test setup for a Government, site access by the public. The following objectives:

  -Sustainable and ecological

  -Easy to maintain

  -Works with the old current computers

  -As inexpensive as possible

  I want to build a virtualized infrastructure Office/kiosk on this site. Here are the products of preliminary tests planned:

  -ESXi 4

  -Ubuntu 9.04

  -New server Dell 2950 - dual xeon heart, 16 GB of ram (specifications can change, not yet purchased)

  VNC - connection

  -Thinstation- http://www.thinstation.org/ to create a VNC client computers

  -A bunch of old computers

  -A few new (not yet purchased) thinclients

  I don't want to ask something specific, just your thoughts. It may be your experience or even your feeling on this type of installation. I want to know how many VMs, I could hope to run like this, limitations, bottlenecks, network requirements, and anything else that I should.

  As it is a public access site, running flash or games are not a concern. Just the possibility to browse the web and use open office.

  Yet once, I'd like some comments on this. I will gladly keep anyone interested posted about how the tests of this system going.

  Thank you

  sounds like VDI or Citrix XenDesktop could adapt to your need for Xen, you can use ESXi as your lats as well

  http://virtualizationreview.com/articles/2009/01/01/the-disappearing-desktop-how-VDI-is-changing-the-game.aspx

  There is a free version, you can configure up to 10 PC worth a try

  http://www.Citrix.com/English/PS2/products/SubFeature.asp?contentid=1685000

• A 'hacker' has a connection to remote vnc on my computer.

  Someone has established a connection vnc on my computer and play with my threatening to delete files from my heart and my computer in brick, is also going through my files and photos.he me slips to search through my webcam and other things. I've already blocked ports 5800-5905 because I think he uses a R.A.T.  But that has not stopped him. I downloaded Malwarebyte s, ccleaner and avast so apparently clean up my systems but it should always connect. At the moment I have Manager tsk open on the users tab, hoping to see his if it connects and open cmd with net stat - Bn and net stat - has but I still don't know if I can see if it connects to me. I really need help!

  I've moved your post to the safe area on the forum.

  Disconnect your PC from the network.

  If someone has connected to your PC via vnc, there is something on your computer allowing in this regard. A connection needs a host 'server' to connect to, so the PC is not "clean".

  -steve

• connecting pc to mac screen screen

  Is it possible to connect a pc to laptop screen to screen mac but he showed up as a window, not full-screen.  I usually use a vga cable which shows the screen of my pc to mac, but I want to be able to do a flow record screen with screen ipad (with airserver) and the two windows separated on my screen bigger mac pc. Not sure if this is possible. Thank you

  Have you looked at TeamViewer, GoToMeeting, VNC or other third-party applications to share screen to see if they meet your needs?

• The app is the best connect my Ipad pro to a pc screen?

  Anyone know what app or software is better connect my I Pad Pro to mirror on a second PC screen? I've tried Astropad but I don't know if there is a version for pc?

  Thanks, I'm new with apple.

  Emanuele

  You can use reflectors to reflect your ipad to your pc screen. Note: You won't be able to interact with what is on you, the Pro of the PC.  You must control the pro pro.  Apple does not allow the remote access connection for the ipad.  If you want the ipad to appear on two pc screens, you mirror the pc to another pc screen.

  http://www.airsquirrels.com/reflector/

  ----------------------------

  To connect to a pc, you can use:

  Post multifaceted read. You can use a mouse with Windows Remote Desktop vnc on the ipad applications.  You need the right app store app.

  Read his article here:

  It is on page 2 of this discussion to half way down.

  https://discussions.Apple.com/thread/7319286?start=24 & tstart = 0

  The mouse of citrix.

  https://www.Citrix.com/products/mouse/overview.html

  http://store.Citrix.com/store/Citrix/en_US/PD/ProductID.317779200/ThemeID.377130 00

  iOS app:

  https://iTunes.Apple.com/us/app/Citrix-receiver/id363501921?Mt=8

  Citrix server application:

  Demo of Swiftpoint GT travel mouse with remote Windows session. Stop and start the knowledge.

  https://Vimeo.com/113962546

  "To connect to any computer in the world that jump Desktop is a reliable and secure (RDP and VNC) remote desktop app for iOS, Android, Mac and PC that allows you to connect to any computer, anywhere in the world." Support for Swiftpoint mouse.

  https://jumpdesktop.com/

• VNC Mac does not not after security update 2016-002

  After the 2016 002 security update, I am unable to VNC into any Mac Machine that has been updated.

  Error: The account you selected is not available

  

  We have the same problem here.

  After this last update, we can't connect to mac through VNC.

  We suspect the problem started after the 'Remote Desktop Client Update"and before the"update"2016-002.

  

• Best way to connect my computer to computer outside

  What is the best way to connect to my server from 14 Filemaker from an outside computer.  Both computers to run OS10.11.  Team Viewer is the only way I just need to do one or two weeks a year, in order to access the program.

  You can use any service remote desktop, such as VNC, Apple Remote Desktop, etc.

• Screen sharing (VNC) does not

  OS X improved 10.11.2 of 10.9.5. Impossible to VNC to the computer. I am able to SSH and SMB. I checked the sharing settings, and I tried to restart.

  "Connection failed for example_computer."

  "Make sure that sharing screen or remote management (in the section sharing system preferences) is enabled on the remote computer.

  Anyone else seen elsewhere and have a fix?

  Thank you.

  This trick works for El Capitan (and probably other versions of the OS as well):

  (Solved) How to fix the screen VNC ARD shares in Lion

• is identical to any VNC speed of Back to My Mac?

  First question, is the CCMM a VNC?

  Is equivalent to the speed of Back to My Mac all VNC, or would a VNC applications faster and better?

  CCMM is more secure than applications on the App Store?

  Thank you

  j

  the speed depends on the slow component of your network between two computers.

  VNC is designed for use within a network or via VPN, CCMM can accommodate that, but also designed to connect to another mac using the same account iCloud provided AFAICT.

  No App store app must pass any rigorous security testing type Apple quality for distribution, so everything you use will have its own limits.