Vodafone Dongle will not be in place?

Similar Questions

• I received an update on your part 10/11/10 and now my laptop will not boot in place! I need HELP.

  I received an update on your part 10/11/10 and now my laptop will not boot in place!  I need help.

  Hi bobbymh,

  -Do you happen to remember the update has been installed?

  -You receive an error message when you try to start the computer?

  Follow the steps below:

  Method 1:

   

  Try to start the computer using the last good known Configuration and check if you can successfully start.

   

  For instructions, see How to start your computer by using last good Configuration known as Windows XP .

  Method 2:

  Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.

  See to run the system in safe mode restore

  See also How to restore Windows XP to a previous state

  Method 3:

   

  Follow the steps listed in the following article:

  How to fix a computer that does not start

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Vodafone Huawei 3 G Dongle will not work on Satellite C50 and Win8

  Recently bought this laptop running Windows 8.
  No matter what I try, I can't do this USB 3 G Huawei Vodafone dongle to be recognized by this Toshiba laptop.

  This dongle works in all our other laptops and laptops and tablets from other brands with Windows 7 or Windows 8 is certainly not something to do with the dongle the software, he moved, drivers or the operating system.

  At a time where it is plugged into the port USB, he opens the window asking what we want to do, telling me that the port and USB controller works, but that's all that.

  When you open the Vodafone software to connect to the 3G option Connect is grayed out and no device is indicated. In other words, it is not to recognize the modem for a reason any.

  As he is OK anywhere else, it must be something to do with this Toshiba laptop.

  Any suggestions / help would be greatly appreciated.
  We have loaded other versions of the Vodafone software and it made no difference. It must be a hardware conflict problem.

  It seems that the device does not recognize the USB dongle.
  Did you test all USB ports?

  As much as I know Satellite C50-A-xxx supports 1 USB 3.0 port and 2 USB 2.0 ports
  Check all three ports.

  You can also delete all the USB controllers and hubs in Device Manager and restart the laptop. After restarting again the unit should automatically recognize the USB ports.
  Also try to disable the sleep & Charge USB in the BIOS (if available).

• Toshiba Bluetooth dongle will not mp3 to phone send

  My Toshiba bluetooth dongle will send image files to my laptop but when I try to send an mp3 file it says file sending failed every time. Can anyone help?

  What brand/model of MP3 player you are using?
  Are you sure that it supports the transfer of files via Bluetooth?

• Area group in every way! will not fix in place!

  There must be an easy fix! I tried pinning of the box and I asked direct muse who said that "Muse are not reactive web pages" do not know what it means, but it seems stupid to build a web page defining the group box on the main text on a small screen, and on a big screen is then leagues the text! To see what I mean, please look at my site www.annuity-helpline.org.uk and minimize the screen, when you do this form box goes on the body of the text. As I say I tried "pinning" the group box with the shape, but it does not work!

  Rather than pinning, the effect you want to achieve would use effects slider with horizontal scrolling and vertical motion put to zero and a key position zero or negative of the top padding of the page, if the page has a.

• OfficeJet Pro L7555: Officejet Pro L7555 complete software will not add printer

  I installed the complete software of features on an Alienware laptop.  The printer is connected to my router wireless via an ethernet cable.  When I try to add the printer, the software identifies the printer, contact the printer, but after completing 50% of installation I get the big red 'X' with Setup failed failed message.  repeated tests end up with the same result.  Tried two doctor scanning and printing and Printer Setup Wizard and both recognize the printer but will not be in place.  the installation wizard cancels download immediately after the start, while the doctor print and scan refer me to the site to install full software that puts me to the square.

  In the reconstruction of the hard drive on my Alienware Laptop M11, I think I've identified the software that caused the problems.  I installed windows Basic, then immediately installed the HP Officejet software without any problems.  However, as I have installed other software I discovered that "Cyberline Youcam" software seemed to have removed the printer and a fax from my list of installed devices.  I removed the Cyberlink software and managed to reinstall printer/fax devices.  You might want to leave HP company know so that they can continue the investigation.  Thanks again for the help.

• Installed on the new laptop, but will not work as wireless? It does not support this device?

  I have the new series g of HP Pavilion... running windows 7. installed HP office jet J4680 and works through usb cord but will not work as wireless... will not be in place.

  You are running windows 7 starter edition?

  -to know

  -Right click on computer

  -Select Properties

  -Look for the system type

  Also, what processor do you have?

• I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not record the numbers. Can someone please help?

  I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not only record the numbers. Can anyone help please thanks

  Problem solved. My husband came and noticed that the number lock has been deactivated. I can't thank you enough for your help. Hope my solution helps someone else with the same problem.

• Android update will not install place 3830

  Once every two weeks or so, I get a notice that I had an Android update. I click on the Android update and it starts to install and then stops after about 10 to 12 seconds. Then it says error and stops, then restarts and everything is normal. I'm still 4.3 Android on my Dell 8 3830 place. I guess it's the 4.4 KitKat Android update. Can someone help me why it will not be installed? I had this tablet for the month and a half and this is the third or 4th time I tried to install the update. Can you help me? Why won't it install? y at - it a setting I need to change? Or is it a failure of my Tablet?

  steveharvey2000,

  Enter in the system and power.

  Opening of session

  Click on settings (the gear).

  Left column, scroll down, on the Tablet, updates to the system, click Find updates

  See if your system will be updated in this way.

  Rick

• HP Office Jet 7612: lid will not stay in position trying to place a document on the scanning of glass plate.

  The top cover does not stay in place, trying to place a document on the scanning of glass plate.

  If not held with a hand he's going to slam closed.

  Y at - there a setting to make the lid to stay until my document is placed to be analyzed.

  I'm not placing books or strange shaped items on the plate scanning, only flat documents.

  If we're not careful the cover (which is heavy) will be slam down and hit someone's fingers or hand if not aware of this problem

  HP notified, they informed me that they would send me a replacement printer. The springs in the upper lid has failed or missing. Even if it took 2 phone calls and more than 2 hours on the phone, I guess it was worth it to get a replacement. It is due to the arrival on 12/14/15

• After the first Placement on the Timeline, video video will not be placed on the Timeline

  Recently, I have this problem: if I drag and drop a clip on the timeline of sequence for the first time, the sequence automatically creates all the parameters and the video plays very well. However, when I do a second clip on the timeline (exact same type of images, different plug), the video will not, place the audio will be. Is no question of I open the item in the preview monitor and then try to insert images on the monitor of the sequence, or if I'm simply trying to drag images right on the timeline, the video will not be placed and there is some X out on video, when I try. I had this problem with a few sequences of H264 and I thought it was just the codec - but now I use my DVCPRO HD film and have never had the question before. Any ideas? It's very frustrating!

  Is your Source Routing and targeting of the track set correctly?

  

  MtD

• try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  Hello

  in what format save you your file? If it's a jpg file, then the text is compressed and unfortunately PS is telling things as they are. Even if you could change the text before you save, after having been saved in jpg format, the text is merged and is no longer editable.

  A good solution is to save the files as PSD files, photoshop files. In this case, all layers are saved uncompressed and so your text will appear in its own layer in photoshop. All you need to do in this case to change it is the result of a three-step procedure

  (1) select the right layer

  (2) take the text tool in the tools bar

  (3) mark and change your text

  So the crucial question is: in what format you save your file?

• ADM 32 GB will not allow a unique SSID and password to be put in place

  Sir / Madam,.

  I got a new 32 GB ADM.  I have updated to Firmware 3.04.  I was able to reset the Admin password without problem.  However, the unit will not allow an SSID / unique password to create its own network.  I typed the info in the settings/edit page the Wi - Fi connection settings, with selected WPA security.  It will allow me to type the information in the data fields, and select done.  But then brings the following error message.

  "Error: failure Action was not successful."  Please try again later. »

  I also tried only to set a password, with WPA, using the name SSID default ('6B 23 SanDisk media").  It works no more.  I tried this in a few days.  The unit is fully charged.  He has no problem to connect with my home Wi - Fi network.

  In addition, on the page of my iPad device settings/Wi-Fi, 6 B 23 of SanDisk media is visible and connects without a problem.  But it says "Safety recommendation" under this network name.  I guess that's because there is no password set.

  I need for this unit to be sure until I'm able to use in public.  Any suggestions?

  Thank you

  Lee

  drlucky... OK, I called SanDisk and they understood the problem with me on the phone.  Wireless Media Drive passwords do NOT accept special characters or spaces.  Numbers and upper & lower case only.  Even for the SSID, except spaces are Ok for the SSID.  Hope this helps someone else who can read it.

• Can not access the Internet following couldn't reinstall Vodafone dongle software

  I am running Vista Business Edition. I have a Vodafone dongle for mobile Internet access with my HP laptop. The associated software wouldn't load yesterday. I uninstalled and tried to reinstall it. Impossible to reinstall. Since then I can't access the Internet. I can get on my network wireless but no Internet. I tried to get Vista to fix the problem but the joy. I tried system Restore to four different restore points and none have worked. Suggestions, please?

  Falco,

  'No Mo' is just that this issue could be better addressed by Vodafone. Please check with them to see if they have a solution to your problem:
  http://www.business.Vodafone.com/site/bus/public/enuk/home/p_home.jsp

• After the new installation of El Capitan, Illustrator will not open and says that it requires a certain version of Java. I uninstalled and need assistance, put it back in place, as well as the question of fixing once resettled Java

  After you install the new operating system of El Capitan for my macbook, Illustrator will not open and told me that I had to update my Java. When I followed the link provided with the message that popped up, it would not download on my computer for some reason any. After trying to solve the problem for hours, I finally uninstalled illustrator, but now I can't understand how to reinstall. I need help reinstalling the program and then fix the Java problem once it is reinstalled.

  magroot,

  For the Java download successfully, I think that you look here or here:

  https://jdk8.Java.NET/Download.html

  http://oliverdowling.com.au/2014/03/28/Java-SE-8-on-Mac-OS-x/

  For reassembly, you can download version:

  CC:

  http://www.Adobe.com/downloads.html?promoid=JZEFS

  Before CC:

  http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-5-product-downloads.html

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

  http://helpx.Adobe.com/Creative-Suite/KB/CS4-product-downloads.html

  http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  Note: If you have the version CS2 Premium Suite, you need to download the standard and then download Acrobat and GoLive separately under their own serial numbers for replacement.

  Be sure to update, as appropriate:

  Before CC:

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh