Voice speaker Conversation, bothered by the noise of backup saved

Similar Questions

• Reduce the noise from the projector

  I'm new to first items 10 and plan on some of my first projects making the transfer of some sound Super 8 films on DVD and the web. I have the film loaded into Premiere Elements but I notice that some have noise from the projector in the background. I have them done with microphone of the camera, pick up the sound from the speaker projector since I have no way to save only the sound alone.

  I did have a lot of luck with the help of audio effects to reduce noise. So I was wondering if anyone knows what I have to use filters. I want to reduce or eliminate (no chance of this, I know) the projector noise so that the voice can be heard better. Thanks to all who have advice!

  I have books of Steve Grisetti ordered but I would like to do something on this project in the meantime. I do not understand how the audio effects change the audio, but I hope the books will give me a full understanding of them.

  The removal of the 'noise' of an Audio file is usually difficult, hard work and often not that good. Yet, this ARTICLE goes into detail. Unfortunately, with noise audio, there is no "miracle cure".

  In my case, my projector Eumig Dual-8 has a one line (DIN plug) and I just feed on my recorder or camera and in the latter case, select Line In, only to turn off the microphone.

  Good luck

  Hunt

• The noise removed, now Audio is melodious

  Can I counter audio snoring? Once I removed the noise from the Hall, the moment sound of chirping voice through a bad telephone connection. I downloaded videos from before and after the noise reduction.

  Before:

  After:

  I'm afraid that you have rather exaggerated it...

  You would be better off removing noise is going smaller, to use a different size of the FFT for each passage, with reduction under each. With this kind of the base level, you will be much better served by using the highest size FFT it is for most of it, but it should also be a collar with a setting of low and medium. Also, don't forget that it's called noise reduction, not removal. Saw a small amount of noise actually remaining with the signal tends to hide many of the murmur and usually other more 'realistic' sound signals, if you wish.

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• Can't access Conversation view under the view menu. With the help of 38.0a1 every day. Any ideas?

  I can access the Conversation view under the view menu in TB version final candidate 31.4.0. But he don't see under daily 38.0a1 of 64-bit version on different computers. Any help appreciated.

  THX

  Ok. Do not take into account. Apparently the conversation view is an Extension to tuberculosis, only not part of the base product. Hope that I would not lose too much of your time. Live and learn.

  Thank you
  Doug

• The noise stopped working on Satellite P100

  The noise stopped working.
  Toshiba diagnosis explains his failure, but after all the rest is good, any ideas?

  Hello

  That said the State of the sound card in Device Manager?
  You don't see any yellow exclamation?

  Have you tried to update (restore) audio driver?

  Have you checked if the 'secret' was not enabled?

  You hear something using the headset?

  Please check these simple steps, and view the results.

• dv8000z Windows 7 32 bit updated to XP and the noise disappeared.

  My dv8000z has been upgraded to Windows 7 32 bit and the noise disappeared. I installed sp35908. When I ran this program as a Vista 2 that it will fail to install, with comment, message "cannot find the MEDIA device for the driver. Any advice?

  Hello:

  Try this driver.  If it does not install automatically then proceed to the next step.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46818-1 & CC = US & DLC = in & LC = on & os = 2093 & Product = 1147474 & sw_lang =

  Conclusion of any windows error.

  Go to Device Manager and click on the multimedia audio controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software, and at the bottom of this window, let pick me from a list of drivers for devices on my computer.

  Select disk, and then navigate to: it\: SWSetup\sp34567\CPL309Ba and select the Conexant AC-Link Audio device from the list and see if the pilot goes like this.  Reset.

• Satellite L500 and the noise of the fan

  Last week, I bought a new laptop Satellite L 500 with Inter i3 processor, 1 GB, 4 GB of ram ATI graphics card, etc.
  Everything is OK in general, however, I think the fan is very noisy.

  I used to own a HP Pavilion laptop and could hardly notice the fan while with my new laptop, the noise of the fan is really loud.
  Does anyone know if this is normal or if it could be fixed somehow?

  I did some internet research for a solution, but I couldn't find anything, and apparently nobody complains noise from the fan on L 500 computers portable so maybe it's only me that have this problem?

  Thank you.

  Stefano

  For optimal use for laptop use the balanced power plan. Go to the advanced settings for this plan and energy saving of Toshiba, you can find cooling method.
  The level here. I'm sure that notebooks fan will be much quieter than before.

• Touchscreen and the noise of the fan U920T - 11 c satellite fails sometimes

  Hello

  I just bought the U920T - 11 c a few days ago.
  I love him but he some of the questions they put me down and make me want to go back.

  The first problem is the loud fan noise that lights up. Is there anyway to turn this off?

  Happens about 15 minutes using the web and then turns on and off every 5 minutes. It's really strong and be in the break room, it is noticeable.

  Can I do to stop this? I'm only using the web and not running other programs.

  I also noticed that the touch screen fails to respond without particular reason. I don't know if there is a trend, but it's frustrating when it stops just for no reason and then sometimes everything works again.

  Looking at these forums it seems that it is a common problem with the Toshiba. I have a few days before I can return, so if they are not resolved, I think that I might go just form the Samsun ATIV book 9 Lite instead.

  Thank you

  > Happens about 15 minutes using the web and then turns on and off every 5 minutes. It's really strong and be in the break room, it is noticeable.

  I assumed that the noise comes from fans who need to run more quickly if the internal temperature would increase.
  What you could do is change cooling performance module in single power management.
  You could also decrease the performance of the processor. This would lead to a lower heat dissipation and the fans slow down.

  > Also, I noticed that the touch screen fails to respond without particular reason. I don't know if there is a trend, but it's frustrating when it stops just for no reason and then sometimes everything works again

  You could try to calibrate the digitizer
  Go to the control panel (Windows key + X-> Control Panel)-> Tablet PC setting.

  The first display tab contains options such as configure screen stylus and touchscreen.
  Here, you should be able to start the installation program and identify the touchscreen.

  The first option must contain 1 internal LCD
  At the bottom, you might find button to calibrate and reset the settings for the internal LCD.

  But it could also be a hardware malfunction. I can't say for sure why this happens, but perhaps a technician should take a look at the material.

• How to reduce the noise of the big FAN on Portege M400 with Vista

  M400 (vista with newer utilities for electric model) FAN blows very noisy constantly regardless of real need for cooling.

  Even with zero responsible jobs, less than 1% (flat curve) of the activity, the processor speed to 50% in the model of power and all power to the minimum settings, FAN does not reduce the speed. After a reboot, for a short time, the noise is bearable, we can conclude that the FAN seems to be capable of low speed.

  On all the M400, we, the problem is the same.
  How to work with M400 in an environment quiet?

  Hello

  Toshiba has designed the special version of the BIOS and it was a long time ago. This version of the BIOS has been designed prior to the launch of Vista, and now we can not say that it is not for Vista.
  Of course, it is not for Vista.

  In Vista, there is a fairly new situation. At first, I must say that it is well known that Vista uses more resources than Windows XP Home edition. Secondly, you know very well that M400 has a lot of background processes running. If I remember well under Windows XP Home edition, there was between 60 and 70, ongoing process. Can you please tell me how are running processes on your M400 running Vista?

  It's really not easy to say what to do. I think that you have two choices: either wait that Toshiba has do something (can take a long time) or try to reduce all the processes running and try to optimize the operating system. I don't think this will help a lot, but you can try.

• Help his Mac Mini? Connected to monitor w / sound coming from monitor. I tried speaker external buffering in the back of the unit and still get only his monitor speakers.

  Help his Mac Mini? Connected to monitor w / sound coming from monitor. I tried speaker external buffering in the back of the unit and still get only his monitor speakers.

  How is the monitor connected?

  Are to connect the speakers to the headphone 3.5 mm? And not the line-in jack 3.5?

  If you go to System Preferences > sound > you can select the speakers/headphones output?

• Nice info on the utility fan against the noise of the fan

  I wrote a small utility to keep the noise from the fan on my Qosmio in check. Several people have asked for it since so I have talked on forums, I have created an installer for it here:

  http://users.PCNET.ro/SP/Toshiba.html

  Four people (including me) use it currently. We are all on Qosmios, but it should work on any Toshiba.

  Hello Alexandru

  Thanks for this tip. May be this tool works very well. I him have not tested because my Toshiba laptop works well. In my case, I need not fan 3rd party utilities.
  Laptop Toshiba computers are preinstalled with the energy saver, which includes the fan control. In my opinion, it works fine.
  Nevertheless, thanks again.

• HP Pavilion a1220n Desktop PC fan (FANIN1) making the noise

  my desktop HP Pavilion a1220n (FANIN1) exhaust fan making a noise.  start-up noise, RPM fan drops of about 960 (no noise) to 750 (noise).  I guess that the fan will stop at some point soon.

  Anyone know the name / plug for this fan, so I can buy a replacement?

  I opened the folder and the fan noise starts, I hit the fan and the noise goes away for a few minutes and then go back.  not the best solution.  If the fan stops, and since it is the exhaust fan, can I keep running my PC with the box to open?  Is the fan at the bottom of the case, not the cooling fan in the CPU.  I guess when the case is open, I get a lot of air so that when the fan stops completely, I can always run the PC.

  Sorry for hiking...

  I-) ihor

  ihorhp,

  The stock rear exhaust fan is a 92mm fan. Part of HP # is 5187-5223. See here

  As discussed here

• How can I filter the noises of thermocouple using a TC-2095 and SCXI - 1102c?

  Hi all

  I currently have four TC - 2095 s connected to the SCXI - 1102c inside an SCXI-1001 chassis cards. These thermocouples are floating and I get a good amount of noise (400 Hz 3 phases and same 60 Hz noise) when we turn on some equipment such as fans, and fans. Using this current set up, how can I filter the noise? Or I would need to put in place a new hardware configuration (e.g., the SCXI-1102 cards)?

  Hi RALoo,

  The 1102 C has a lowpass filter with a cutoff at 10 kHz frequency, so you will not be able to filter into the material with your current configuration.

  Your first option is to use a software filter.  LabVIEW has several functions that do this. More information can be found here: http://zone.ni.com/reference/en-XX/help/371361J-01/lvanls/filter_vis/

  The second option would be to change to SCXI 1102 cards as you suggest.  The low-pass filter of the 1102 was a cut-off adjustable to 2 Hz frequency, which will stop the noise of 400 and 60 Hz don't affect your readings.

• How to reduce the noise in an acquisition of data USB-6251

  Hello world!!!

  I have a few questions about a system that I have developed using a data acquisition OR usb card 6251. The pressure control system.

  First of all, the signals are acquired using an Omegadyne pressure transducer. (Typically, the signals are between 0.1 mV and 38 mV, pressure is between 0 to 50 lb/PO2). The transducer is connected to the usb-6251 daq card (I use pinout of the 1 and 2 for the signal acquisition, also, I have a 100 K resistor between pin 2 and 3) and the card is connected directly to the computer. In addition, I have an omega counter, I use it only to see pressure on the screen. But long term, it will be useless.

  One of the problems I have found is the noise, the measured voltage values change much. Even if the figures in the player screen do not change so much... (or do not change)
  The system should regulate the pressure so if every second it changes a lot, the system did not work properly. How can I make the technical more similar to that of the meter? In the labview program that I use, I use a block 'base DC', he reduced noisy signals a lot, but not enough that experience, I need more stable values.

  Thank you

  I don't mean in the /manuals of broaching and do not open .doc from unknown sources files (a chart single .png is fine ;-))

  However, I guess you already measured in differential mode and the 100 k is a path for the currents of polarization forever

  The reason why your counter is stable can be the fact, that she has a generation to filter low pass (on average) with a big enough constant time.

  First things to do:

  You did it that there is a filter anti-aliasing suitable for your sampling rate?

  Read the signal on at least 100 ms (120ms in line 60 Hz) possible higher sampling rate and take a look at the signal (and display a chart as a .png or .jpg image)

  This will give you an idea how the signal looks the same. Then you can choose a filter according to your system and the signal or other investigations to do not even catch the noise (groundloops, protection...)

  You can use an example on the screws or the testpanel to the MAX for this measure.  (Personally, I prefer a similar scope :-))