Reduce the noise from the projector

Similar Questions

• How to reduce noise from the FAN on Portege M400 with Vista?

  M400 (* _VISTA_ * with newer utilities for electric model) FAN blows very noisy constantly regardless of real need for cooling.

  Even with zero responsible jobs, less than 1% (flat curve) of the activity, the processor speed to 50% in the model of power and all power to the minimum settings, FAN does not reduce the speed. After a reboot, for a short time, the noise is bearable, we can conclude that the FAN seems to be capable of low speed.

  _Problem is the same, even if the M400 is outside 9 ° c! _

  On all the M400, we, the problem is the same.
  How to work with M400 in an environment quiet?

  Post edited by: Admin

  HM, I wonder why you open a new thread. I mean, I have read the solution and the last of them is the BIOS 2.1N.

  So, please contact a Service partner to install this BIOS or google for it, since theres no alternative at the moment. :(

  Sorry mate

• Camileo P100 screen is black, but the noise from the unit

  Hi all
  I just bought a Camileo P100 and fully charged.

  Although it seems to work when you take a picture the camera 'clicks', the video recording the LED flashes, the touch screen is black and I don't see anything.

  When you touch the screen, it doesn't seem to be working (there are noises from the unit when I touch the screen), but the screen is black.

  Can anyone help?

  Thank you
  Mark

  Hello

  Try, press and hold the button On / Off a few seconds.
  Also check if the opening of the camcorder is open

  But it looks a bit like a hardware problem.

• Satellite C660 - 1 HL: how to reduce the fan noise?

  After buying the C660 (1 HL) I'm especially glad of his duties - if it was the bad noise it emits.

  I use laptops for 12 years, but this one is really annoying with every minute repeated with penetration hum of a fan, even if the laptop is in sleep mode.

  I compared with a C650, who is often quiet and his fan, if being run, does not cause that kind of noise.
  So far I found any kind of control for the fan, no driver or powermanagement setting, that I had before for example with a Satellite M70.

  I always thought, technological development will bring improvements, but not the trouble of this kind.

  Thanks for the tips of any solution

  GW

  PS: I'm on Linux (Ubuntu) and Windows 7 another possibility, while having this problem. BIOS is upgraded to V1.80

  In Win 7 power management, cooling modules and the processor performance can be set down.

  + How to manage Windows 7 power management features.
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  There you should find options like power management Toshiba Power Saver and processor that helps reduce the performance of the processor.
  This would reduce the heat dissipation and temperature level.

  For optimization of power management Linux please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64329

• Satellite L755-1GH - noise from the fan always on

  Hello
  I own a laptop L755-1GH which has its fan always on, producing a large amount of noise. Temperature is not the 80 ° c but nor least fan is already blowing less than 70º, for now it is at 58ºC and it is already underway.
  The pc is still in the warranty period, but I can't be without the pc, because that's my work pc.
  Any ideas of how I can solve this problem?

  The Turbo is already disabled, and I use a cooling package... already blown air to clean the dust a few sec.
  If I open it, I'll be out of warranty and I can't send it to the warranty...
  Is there some Toshiba diagnostic tools?

  You can reduce the activity of fan if you change the option in the parameters of the method of cooling.

  Power profile open that you use and go to advanced power settings.
  You will find Toshiba power saver options and method of cooling.

  Change it to optimized battery.

  Please, do it and post comments.

• Equium A100-147 - clicking noise from the HARD drive

  For awhile, I had clicking noise from the HARD drive and when the laptop could not, I assumed the reader was packed but trying a replacement nothing happens. I get a blue light for battery and a blue light (low) for the supply of direct current, but nothing for power or disc. However, when I plugged in an external drive yesterday it starts fine and when I unplugged the laptop continued to work the internal drive. But even once this morning he died and will not start. I read that the BIOS can stop recognizing the drive or maybe that the settings are not being saved when it is off. Could it be the motherboard battery?

  > reading the BIOS can stop recognizing the drive or maybe that the settings are not being saved when it is off

  Enter the Bios (press f2 at startup) and check if it recognizes the hard disk. You can see on the home page or the boot option in the Bios.

• How to reduce the noise of the big FAN on Portege M400 with Vista

  M400 (vista with newer utilities for electric model) FAN blows very noisy constantly regardless of real need for cooling.

  Even with zero responsible jobs, less than 1% (flat curve) of the activity, the processor speed to 50% in the model of power and all power to the minimum settings, FAN does not reduce the speed. After a reboot, for a short time, the noise is bearable, we can conclude that the FAN seems to be capable of low speed.

  On all the M400, we, the problem is the same.
  How to work with M400 in an environment quiet?

  Hello

  Toshiba has designed the special version of the BIOS and it was a long time ago. This version of the BIOS has been designed prior to the launch of Vista, and now we can not say that it is not for Vista.
  Of course, it is not for Vista.

  In Vista, there is a fairly new situation. At first, I must say that it is well known that Vista uses more resources than Windows XP Home edition. Secondly, you know very well that M400 has a lot of background processes running. If I remember well under Windows XP Home edition, there was between 60 and 70, ongoing process. Can you please tell me how are running processes on your M400 running Vista?

  It's really not easy to say what to do. I think that you have two choices: either wait that Toshiba has do something (can take a long time) or try to reduce all the processes running and try to optimize the operating system. I don't think this will help a lot, but you can try.

• NEITHER 9205 always returns the noise from rail to rail.

  Hi all

  I'm completely stumped on this one. I went through the procedure of implementation of the NI 9205 module in my project. Setting the channel to the appropriate type. Placed the node IO in my FPGA code, read and all I get is noise from rail to rail, that is, whatever the measurement range is, I'm getting noise across the range. I ran it as a measure of CSR, as a measure differential, differential with COM updated wrt my diet, differential with COM Earth and the mass of the chassis connected to my powersupply ground.

  Rail to rail noise ringing bells for anyone?

  I checked with an oscilloscope that the appropriate signal is seen on the pins in all the configurations above. I even unplugged and plugged a 3 v battery through the pines and still noise from rail to rail get.

  Help!

  HM, I used the 9205 before, but didn't have never seen something like this. I am more fan of data buffering in a FIFO, rather than reading a control value, but still, you shouldn't see this kind of securities for a reason that I don't see. I had problems with the modules where something is messed up and randomly, the signal will drop out then go back (in fact, I am about to send an or because it is still under warranty, but it's in a portable box, so I think that he may have had problems with shock or something of the sort). I wish I had a good answer for you, but you seem you know what you're doing, so it could be one of those cases where there is a hardware problem.  You have any other module HAVE you can share and see if those working in this niche? You can try it in a different location to maybe see there is a connection from bad backplane? You can also check if your local rep OR has a loan that they can indulge for a day, just to see if another 9205 works. Usually, these are the steps I take when I think that there may be a hardware problem. Unfortunately, except that I don't have a lot of input for you.

• Whenever I have insert a device into the port I heard an unusual noise from my laptop

  Original title: usb device

  Any time I incert a device in the port, I heard an unusual noise from my laptop.

  Hello

  It could be Connect Device noise - double click on the little speaker near the clock below
  right and MUTE (speaker under the cursor symbol).

  If that stops the sound and you want to permanently stop without using the MUTE - right
  Click on the small speaker - sounds - search device connection and set it to NONE.

  If inhibition does not stop the noise could be disturbing, and I would have the computer controlled
  by a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of the machine system.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How reduce the size of images from my Web site?

  Hi, I'm quite new to build Web site and using photoshop to make images for her. I have a Web site here: http://naughtylanguageofdesire.com/

  I noticed from time to time that it takes forever to open my Web site. I read some information from a site saying that it could be because of the images in my website being too large. For this reason, it takes longer for my Web site is displayed.

  Is it possible for me to reduce the size of their share using Photoshop? At the same time, I like to keep a decent quality. Thank you

  First to use Image > Image size and pixel units since it happens in the game screen.

  So, I suggest "save for Web". You can adjust interactively size vs quality while watching your preview.

  You also have the option to remove metadata and I understand "Optimized" is a good choice.

• How to reduce the level of background noise using Premiere Elements

  How can I reduce the level of background noise using Premiere Elements?

  Welcome to the forum.

  PrE has a few effects, which might help, but an Audio editing program is much, much better. I use Adobe Audition, but the free Audacity is quite handy.

  This ARTICLE will give you more advice.

  Good luck

  Hunt

• Output from laptop to the projector without image DVD - Qosmio E10

  Hi all

  I have a Toshiba Qosmio E10, which has a component output (RGB). I plugged it to the projector and after a few alterations, the desktop appears on the projector. However, when I try to watch a DVD or a divx avi file there is no picture (black appears space instead). The film shows on the screen of the laptop with no problems. I tried different players (WMP 10, WinDVD, and Divx), but none of them work. Same problems with output to the TV as well.

  The laptop has a Nvidia G-force FX 5200 graphics card.

  I think it may have something to do with the decoder, but I'm not sure.

  Any suggestions?

  Hello

  As far as I know you must first switch to the external device and after the departure of the DVD player. There is no picture if you start the DVD player before moving on to an external device.

  It is also possible that everything using the laptop display and an external device when the image appears on the screen only. This is not a restriction of graphics card just the problem. The test properly. I think that the DVD movie can be included either on LCD or an external device.

  Good bye

• Not able to reduce the size of the police after turning off the projector.

  I use my laptop for powerpoint presentation for the students of the University. I use a Lenovo Thinkpad SL500. However, there is no problem to connect to the projector. The last time that I disconnected the projector, the size of the font is not some up to normal. I tried to go to the option of customization and selected the smaller font. Even after a reboot, the font size is not down to normal. The next time I plugged the projector, the size of the font was normal. After disconnecting, the font size is increased further. Help, please.

  Hi MamoonSyed,

  1 - is the maximum resolution (800 × 600 pixels), your computer can get?
  2. what happens when you set a higher resolution?

  You can try to set the resolution higher than 1024 × 768 or higher and check.

• Reduce the RAM from 4 GB to 2 GB

  Original title: "change the RAM"

  to install "lego racers 2', I saw advice to reduce the RAM of 4 GB to 2 GB, install, then increase the RAM to 4 GB. How can I do this and are there any risks involved?

  Had to hop in this one, too much outside the walls, not to do!

  LEGO Racers 2 is an older title, looks like it was released in 2001. This is the page for Windows Vista compatibility:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=LEGO%20Racer%201%262&v=ValuSoft&UID=&pf=0&PI=0&s=LEGO%20racers%202&OS=32-bit

  Doesn't look as if it were entirely consistent. I found the thread (warning: third-party Web site) Dominic refers to the good. It seems that when users have more than 2 GB of RAM and try installing the game, Setup returns with an error "not enough memory". When they get out a stick of RAM and get up to 2 GB or less, he moved very well. After that they can reinstall the RAM and the game will play very well.

  My best advice is to contact the manufacturer of your system using Add/Remove RAM since the steps differ by the system. If you can provide your system and the model, I'm sure we could find the manual for you, or at least get you pointed in the right direction. But all-in-all, I see no problem temporarily remove little RAM to get the game installed. Just be sure to put yourself in the Earth (by entering the metal case) before touching any components and you should be fine.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to reduce the size of the SWF to a file imported from After Effects

  Hello!

  I'm doing a banner web for an internet marketing company, so he has very specific requirements. We did it in After Effects, and I was able to export it to an FLV file and import to Flash very well with the SWF file. Now, I need to make the significantly smaller SWF file.

  At the moment it is 2.5 MB and we can only present a 40K SWF size. It is even possible to reduce the size so much and still keep intregrity of the animation?

  I'm more familiar with Flash than After Effects, but he can play with the settings, etc. If someone can tell me what to try.

  Thank you very much for your help!

  is the flv almost 2.5 MB? If so, your only option to significantly reduce swf size is to load the FLV dynamically (which is not usually allowed with banner ads).