Voltage R6400

Similar Questions

• Hi, I have an iMac 27 "(mfg mid-2010) bought in Singapore." I'm going in North America and I was wondering if I can take computer. Food can be adapted to Asian to NA current/voltage?

  Hi, I have an iMac 27 "(mfg mid-2010) bought in Singapore." I travel in North America. The computer is still in good condition and want to know if I can take it. For most electronic devices, the different current/voltage in North America that makes them more or less useless, but laptops, for example, have the adaptability between the two parameters of current/voltage. The iMac has this capacity? The food fits North American power?

  Yes, he does.

  (142107)

• Can I load my apple (US) products to 220 voltage in the Philippines?

  IM wondering if I can directly load my iPhone/iPad into a 220 voltage (Philippines) without adapter points.

  If you use the Apple PSU supplied, Yes. You will simply need a plug adapter.

• can I recharge the 6s with a source 220/240 volts without voltage converter?

  The s 6 + are attributable to a source 220/240 volts without voltage converter?

  If you mean plug the charger on a 220/240 V source, Yes.  You will however need to a form of adaptation.

• Can I charge my iPod with my iPad charger or different voltage

  Can I charge my iPod Classic with my iPad charger or the voltage is different?

  The voltage is the same, so you can try it safely.  Apple says...

  Using the iPad with your iPhone, iPad, and iPod - Apple Support power adapters

  However, I have seen the reports here this iPod classic does not work with some of Apple's USB adapters.  For example, it is the adapter of 12 watts of power, which is the one that is provided with some iPad models

  http://www.Apple.com/shop/product/MD836LL/A/Apple-12W-USB-power-adapter

  While other iPods are listed under compatibility, iPod classic is not.  The smaller adapter 5 watts of power (which came with mini iPad)

  http://www.Apple.com/shop/product/MD810LL/A/Apple-5W-USB-power-adapter

  shows iPod classic models under compatibility.  Another power supply supplied with iPads works 10 watts; There is no separate current entry for it in the Apple Store.

• high voltage damage your iphone 6s?

  high voltage damage your iphone 6s? what is the effect

  It's an electronic device, then Yes, the high voltage can do all sorts of unpredictable effects for an iPhone or any other electronic device. Cannot specify extent of the damage, but would probably be all that could be fried.

  See you soon,.

  GB

• Portege R930: Low voltage DDR3-1600 SDRAM (1.35) or standard voltage 1.5

  Hi again,

  I just wanted to know if the two kinds of SDRAM DDR3-1600 Rams (one is called memory low voltage) which are available on the market are compatible with my Toshiba Portege R930 i7?

  Thank you!!
  Concerning
  / Anders

  The detailed specifications of the compatible modules are:
  + DDR3-1600 PC3-12800, SODIMM 204p, 1.5V +.

  As you can see its standard voltage of 1, 5V

• IPads can be loaded with voltage converters

  A voltage converter allows to load an iPad while vacationing in St. Martin?

  If you use Apple charger provided, there is no required voltage converter. You will simply need an appropriate outlet adapter.

• Satellite A300 - voltage to the Mexico problem

  Currently, I use my Satellite A300 in Europe (I bought it here too), where the voltage is 230V.
  I go to the Mexico and I would like to take this laptop with me.

  However, in Mexico, they have a different voltage - AFAIK 100-127V.
  Is it enough to buy the new adapter arriving at the Mexico?

  Thanks for the reply!

  Hello

  AFAIK all Toshiba laptops are equipped with adapters that supports an entry universal voltage 100 ~ 240V 50/60 Hz.

  As you can see, the input voltage may be between 100V and 240V. I think that you will have no problem to the Mexico ;)

  Welcome them

• Qosmio X 500 - 11U - Eco Utility unable to check the voltage

  Hello

  I install the new version of the utility 1.2.11.64 eco (eco - 20100526090958.zip or TC00149401E.exe) and now, when the computer restarts, I have an error like this: impossible to check the voltage or a similar message.
  Works of utility but nothing seen on the graph, and the left button on the keyboard switch eco - standard mode!

  Any answer to this problem or am I alone with this?
  Thank you in advance for help

  Hey Buddy,

  I never saw such a message of error of Eco Utility even I use Eco Utility for months. I've never had a problem with this utility and it works very well, it saves a lot of energy, especially if you work in battery mode.

  In any case, maybe something went wrong during installation, so you must remove Eco Utility and restart your laptop. Then use CCleaner to clean and repair Windows registry and restart again. After that download and install Eco Utility again.

  I hope it works! :)

• Can I connect 220V AC voltage directly at HP Pavilion 8766C?

  Hello!

  I live in Greece and I would like to know if I can connect directly to a Pavilion 8766C 220V AC.

  Thanks in advance!

  Take a read of this section on the power supply. First of all, you should make sure that the voltage selector is 220 VAC.

  

  Once you take care of it, so it's no problem using 220 VAC.

  Kind regards
  ERICO

• Upgrade memory voltage

  Hi - I have a HP Pavilion t685.uk, with 1 GB of RAM - I want to add more RAM. Memory cards are DDR-400 s, however, when I look online to purchase one, I find there are 2 different voltages available - 2, 5V and 2, 6V. I looked in all the documents that I have for the PC, but nowhere no it tells me the RAM voltage.

  I noticed here...

  http://h30434.www3.HP.com/T5/desktop-hardware/upgrading-memory/m-p/124/highlight/true#M3

  This tension is not mentioned - but it is certainly important?

  In any case, I need to know the voltage and the purchase of the module OK, or is - this important step?

  If I need to know the blood - how will I know?

  Thanks in advance!

  Robin

  PC3200 is THAT DDR SDRAM designed to operate at 200 MHz using DDR - 400 chips with 3 200 MB/s bandwidth. Because PC3200 memory transfers data on both fronts and clock, its effective clock rate is 400 MHz. (Source here)

  See here the memory (in number thereon) refers to the PC-3200 (200 Mhz).

  The final answer: you can install up to (4) 1 GB PC3200 DDR400 modules. The system will show around 3.25 to 3.5 GB of memory. (Please don't ask, it's just the simple truth about 32-bit OS).

• Satellite A100-495 - Win7 show too high battery voltage

  Hello

  I upgraded my laptop old but reliable (A100-495) too Win7 X 64.
  Now, I recognized that Win7 Manager energy shows that 67% remaining at full charged battery...
  I checked with several energy programs - all expect a 15V for battery voltage.
  But the A100 battery only have 10.8V.

  This happens with 3 different batteries.
  Does anyone else have this problem? No idea how to say that the battery has only 10.8V to Win7?
  I tried to reinstall the drivers from the battery and ACPI - but it did not help.
  Multiple load / uncharging also showed no change.
  The best battery last for about 90 minutes, not too bad but battery starts already after 30 minutes...
  Allows you to change the values of caution - a little - but even after to 0% it works for about 20 minutes...

  Any help appreciated ins

  concerning
  BR,

  > But the A100 battery only have 10.8V.
  Looks like the battery nears the end
  How old is the battery?
  Each battery would start to lose own performance after about 500 charge cycles.
  This should be considered.

• Hard drive 4SNS HARD drive voltage error > SSD in iMac end 2012

  Hello - I replaced a HARD drive of 1 TB on an iMac 13.1, end of 2012 with a Samsung 850 500 GB SSD, closed and buttoned to the top of the machine without problem and started and attempt to restore backup time machine. This process completed 85% and then stalled. To restart, I'm stuck in a loop of the error. I ran diagnostic test and received the following code:

  4SNS/1/40000001:VH1R-0.000

  At first, I thought it was a missing thermocouple that many articles will guide you, but seems it's only on models 2011, not 2012 as in my case.

  I opened again and confirmed that the cables are well connected, represented diag and have the same error. Any other suggestions? The player would be bad?

  Thank you!

  Dan

  This error, as you already know, is for the hard drive voltage sensor. Replace the hard drive and EEA, what is happening. It looks like a bad SSD.

• Can I charge my iPad using a voltage converter and an outlet of 50 Hertz in Europe?

  IF I want to reload my iPad in a foreign country with 230 v AC and 50 hertz can do with a (at 115 v) voltage converter and still using 50 Hz instead of 60 Hz? Who will work ok without damage to the iPad?

  If you use the charger supplied with your iPad, it will switch automatically. You may need an adapter outlet such as those at Travel Kit for the Apple world.