Portege R930: Low voltage DDR3-1600 SDRAM (1.35) or standard voltage 1.5
Hi again,
I just wanted to know if the two kinds of SDRAM DDR3-1600 Rams (one is called memory low voltage) which are available on the market are compatible with my Toshiba Portege R930 i7?
Thank you!!
Concerning
/ Anders
The detailed specifications of the compatible modules are:
+ DDR3-1600 PC3-12800, SODIMM 204p, 1.5V +.
As you can see its standard voltage of 1, 5V
Tags: Toshiba
Similar Questions
-
HP 430: can my hp laptop 430 4 GB SDRAM DDR3 1600 mhz memory supported
my laptop is currently sitting at 2 GB that literally kills me. I'm planning on the upgrade of my 8 GB RAM and makes some research online. I discovered noticed that my laptop is on 2 GB DDR3 1333 mhz and my usual hardware said 1333 mhz Rams are quite rare and 1600 mhz are the most recent. If im here to ask if my laptop can support 2 x 4 GB DDR3 1600 mhz SDRAM
See you soon
That is right.
I would not exceed 1333 MHz and I would ge standard 1.5V chip not the 1.35 V chip.
PC3-10600
-
Portege R930 - BSOD when connecting monitor high resolution with HDMI port
Hello.
I have a Portege R930 (pt331a-01w001) running Windows 7. All about the laptop works as expected, however, when I connect the laptop on a screen high resolution (2560 x 1440) via the HDMI port, I get a blue screen of death.
Can I use the HDMI port to connect my 1080 p LCD TV and my monitor to work which is a lower resolution and it works well.I tried several cables and different monitors of the same resolution.
If anyone can help?
Hello
Simply said: the laptop not breaks down using external monitor with a less than 2560 x 1440 resolution. Right?
Find your laptop model.
[Portege R930 PT331A 01W00101 | http://www.mytoshiba.com.au/support/computers/portege/r930/pt331a-01w00101/specifications]and it seems that the device supports the Chipset IntelĀ® QM77 Express and IntelĀ® Graphics Media Accelerator QM77
I recommend updating the graphics card driver.
You will find the page of the Toshiba Intel display driver v8.15.10.2712 (Win 7)
Also, you could test the version downloaded from the Intel page. -
DDR3 1600 means windows 7 64 ult won't boot value
Hello... I just did a reconstruction and I have problems to start windows when configuring memory at 1600 mhz in bios.
Here's what I bought
i5 4670 K
ASUS B85M-EBlu Kingston 16GB (2x8GB)KHX16C10B1K2/16 X - 16 GB (8 GB 1 G x 64 bit x 2 pcs.) - DDR3 - 1600 CL10 240 - Pin DIMM KitCoreXstream OCZ 500W PSUSANDISK Ultra 128GB SSD moreAlso runs a Gainward GTX 550ti, a M - AUDIO Delta 10/10 LT and a hard disk of 1 TB with a Pioneer DVD RW
Now, in shopping for this reconstruction, I noticed some criticism of memory problems, but not how to solve this problem, other than to change the settings in the bios. I just read on times and tensions, but I'm not sure if and what is true for my scenario and even if I came on my own this far I'm a little lost with playing with the parameters of memory never had to do before.
By default the memory appears in the bios as 1333 mhz although I don't know why, if there is a problem with the memory or just how the M/B is set at the factory. As it is, my pc works perfectly fast but I would like that you wait, get the full potential that I made the effort to buy memory 1600.
I don't know if I need to add additional info, but if necessary, let me know.
Thank you
1600 means generally that you have XMP enabled in the BIOS. Disable the XMP and then run Memtest86 +.
Memtest runs from a floppy disk or CD and should eliminate or confirm if one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Also check the Dram voltage
J W Stuart: http://www.pagestart.com
-
Can CPU overheating if Portege R930 goes into sleep mode?
I have an a Portege R930. I run an application of 25-30% of the CPU for long hours. If I put the laptop in mode 'sleep', the calculation get suspended? If not, and it is still running, how the CPU is cooled when the fan is off mode 'sleep'? The CPU can overheat?
I * don't * want my program from several hours to be interrupted by a detector from overheating. If I know that the program is suspended in mode 'sleep', I fear enter "standby" mode. If this isn't the case, so I'll keep the laptop awake, and if I need to carry the laptop, I'll put it into hibernation.
The answer seems to be that the CPU cannot fire because the programs are suspended: http://forums.toshiba.com/t5/Port%C3...p/689961#M4014
-
Portege R930 - 14 X and additional software
Hello
I recently acquired a Toshiba Portege R930 - 14 X, a friend. It is running Windows Pro 8.1, it came with any disks etc. It does not seem to have any of the supplied software, he would come with out of the box. Please excuse that my ignorance, but is there anyway I can restore it or download it please.
Thank you very much
Hello
According to the specifications of the laptop this model of laptop computer came with preinstalled WIN7 64 bit PRO & WIN8 64 bit PRO DVD.
http://www.Toshiba.co.UK/discontinue...Tege-r930-14x/I don't know what version of the OS is installed now, I mean is it original with update or install own Win8.1 Win8 but all drivers necessary, tools and utilities, you can download from Toshiba support and download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp
Additional software is included in the recovery image only.
If you have any other questions please be free to ask.
-
If I understand the straight plug to the Portege R930 with i7 processor maximum RAM is 8 GB. Has anyone tested a larger memory to say 16 GB?
/ Anders
What model do you have? At your Portege PT331E part number?
-
Portege R930 - upgrade the mSATA SSD succssfull
Just briefly, I wanted to report an SSD upgrade.
When I got my Portege R930 (PT331E, i7) two years ago, I changed the HD to a PRO 840 Samsung SSD 512 GB (big improvement). Now, this SSD is too small (photos!) and I wanted to increase the capacity up to 1 TB.
But instead of a new SATA, I decided to go for an mSATA + adapter SATA I felt an mSATA unit would be more "evolutionary" - next update of the laptop for me would be a Portege Z, who use mSATA.
So I bought a Samsung 850 EVO 1 TB with a Delock adapter/converter mSATA SSD, made a clone of the Apricorn cable and the software switched the SSD and everything works fine (actually a little faster )! At first I tried to use the clone with software from Samsungs migration but this didn t work, maybe I didn t the right version.
-Now I have a lager SSD that will live longer than my R930. Please note that I'm not an expert with computers - just a happy user Toshiba! Thanks for a good forum with my good ideas!
Concerning
/ AndersSo, I bought a Samsung SSD 850 EVO mSATA 1 TB whole with a converter/adapter Delock...
.. .and everything works fineGood news Lao!
Thanks a lot for the comments...I also upgraded my laptop with a 250 GB SSD drive and now I think of a larger SSD... I should consider your solution now...
-
My Portege R930 (PT331E - i7) becomes quite warm today, earlier it was very silent, now the fan is 70% most of the time.
I open the bottom cover and checked the cooling paste on top of the processor - seemed rather dry.
Should I change the dough? I cleaned the fan.
What can I do else?Thank you
/ AndersHello
If you have already removed your laptop and cleaned vents and grid cooling cooling you can also change the FAT if you know how to do this. I mean, why not. Laptop is already open.
Usually after the computer cooling system laptop cleaning should work a lot quieter. A few years ago I did this on my machine. I found so much dust inside which blocked the air flow.
-
Portege R930 brightness increases when the shiny things are displayed
I use a Portege R930 with the 2nd lowest brightness. I noticed that when something bright is displayed, the overall screen brightness adjusted upwards by about 5 tiny slices to speed increment of 1 / second.
Increments of brightness are not nearly as pronounced as the steps in the brightness slider, but it's there. And very annoying.
I can't find any mention of this 'feature' online. Is it possible to disable it?Hello
I put t know if your laptop was equipped with the graphics card AMD but the problem, you take it all sounds a bit like a future provided by AMD GPU called: AMD vari-bright.
Vari-bright save energy consumption by optimising contrast image on the internal LCD screen AMD computers.This feature can be used if the computer is running in battery mode, using the internal LCD only or PowerPlay settings under mode battery is set to maximize autonomy.
The Vari-Bright feature can be turned on and off in CCC.
-
Portege R930 - 1 d 0 + Replicator port dual monitor supported high speed II - taken
Hello
Crossing a Portege R930 - 1 d 0 high speed port replicatior II.
Is it possible to dual-display output?Thank you
You hear the internal + external display by the dual display or you mean two external monitors?
Speed Hi II port replicator supports the RGB port and display port and HDMI port but (display port and HDMI) can not be used simultaneously.You can use the internal s for computer laptop HDMI port and for example a the Hi speed port replicator II ports to connect an external monitor.
-
Portege R930 is compatible with Dynadock U3.0
Hello
I m using a Portege R930 with a ' Toshiba Hi Speed Port Replicator II.
The dock works fine, most of the time, but I was wondering if R930 is also compatible with Toshiba dynadock U3.0 USB 3.0 Docking Station universal since I want to use the laptop monitor and 2 additional monitors(1920x1080).Best regards
Adrian DobreThe Dynadock U3 is compatible with most computers and could be connected to a regular USB port.
It supports separate chip graphic.
It supports a HDMI and a DVI - I ports that can be used simultaneously.
This support allows to use up to 3 monitors (2 external + 1 internal)
-
Portege R930-C086 - how to recover the Windows 8 serial key?
I have Toshiba Portege R930-C086
my hard drive is broken, I lost all my data and the original windows 8
so I want to buy the new HDD, and I want to know how I got my windows 8 key back?I don't want to buy the new windows 8.
Each laptop comes with preinstalled operating system also preinstalled recovery media Creator called tool. This tool can be used to create bootable recovery DVD or USB media. This recovery media can be used in case this recovery HARD drive installation procedure no longer works or if the HARD disk fails, as in your case.
I presume you didn't create this media, right?
Is that you can order the original recovery image but is not free.
More information, you can get the Toshiba service provider in your country.I don't know if you can order it on https://backupmedia.toshiba.eu/landing.aspx but please check.
-
error 0xc004e003 during activation of Win 7 Pro on Portege R930 - 17 L
Toshiba Portege R930 - 17L
S/N: 5D016093H
(If I search on Toshiba after SN I only find in Toshiba - Ukraine)Bought at the shop online "Sigmanet" in Romania.
It has a sticker on the back w / Windows 8 Pro (small sticker without product key).
He arrived with the installation of Windows 8 CD.
Now, it has been pre-installed Windows 7 Pro x 64 SP1 (this laptop has the right of use of Windows 8 and Windows 7)
Of course, the preinstalled operating system has been slow and gave errors (pre-installed McAfee antivirus, a bunch of small apps, a.s.o.)I reinstalled Windows 7 Pro SP1 x 64 (original CD) on a clean partition.
I can't activate it with the following text:
Product key: XXXXX-YYYYY-ZZZZZ-XXXXX-YYYYY
Product ID: xxxxx-OEM-xxxxxxx-xxxxx
Error code: 0xc004e003Now, I spoke with the Microsoft Romania, they tried to help me, but they failed.
They told me that the license seems stuck at Toshiba, so they suggested to speak to them (Toshiba) to unlock the license or provide a new product key.So, I contacted the seller. They passed me at the service of Toshiba authorized in Romania which avoids to help me.
Now I'm stuck. What to do or who to contact. Everything is so blurry...
I appreciate any response you can give me. Thank you!
> It has a sticker on the back w / Windows 8 Pro (small sticker without product key).
> Happened with Windows 8 installation CD.
> Now it was preinstalled Windows 7 Pro x 64 SP1 (this laptop has the right of use of Windows 8 and Windows 7)Laptop Toshiba computers are preinstalled with Windows systems that are already activated.
The stickers that you will find at the bottom of the units are the serial OEM key and these keys don't work in relation to other different systems. The OEM key belongs to the preinstalled image.So in case you would use the Toshiba Recovery disk and install Windows system using this disk, the serial key is not necessary.
According to the technical specifications of Toshiba:
http://www.Toshiba.co.il/en/laptops/Portege/r930/Portege-r930-17L/ the laptop has been pre-installed with Windows 7 Pro 64 bit.This means that Win 7 Recovery DVD was not part of the package. Why?
because the Toshiba Recovery Media Creator software has been pre-installed on this laptop. The software allows you to create the recovery DVDs containing Pro Win 7 64-bit system and the image that is activated. -
Portege R930 - 15G - lack of security of Toshiba Assist Module
On my new Toshiba Portege R930 - 15G I can't call the "Toshiba Assist security" module and only get the message 'a required module is not installed.
If a Toshiba support person is reading this forum, I would be very happy to get a hint of what source I was able to download the required installation files.
Maybe someone else has an idea how to solve the problem.
Andreas
> I can't call the "Toshiba security Assist.
Can you please tell us how do you do that? Are you using the original preinstalled OS or the clean version?On the Toshiba download page, you can find this tool, version 2.0.9. try to download and install it.
Maybe you are looking for
-
How can I get my reactive XP product key?
My pc can no longer go online and have removed the HD in external enclosure and installed Parallels on my Mac, but I can no longer use my product key XP to load the operating system on my Mac, can't get information because they do not allow my Mac to
-
attempted to delete avg, the pilot could not (oxoooooooo) msi IAM failed
IV, e attempted to remove avg anti virus and its action of msi driver failed (oxoooooooo) display failed
-
Native UI in Flex Mobile Application action bar
Hi all I managed to port sample WeatherGuesser of FDT Mobile AS Application and market. But how to do so that the port in Flex Mobile application. I would use native look of the action bar, back and all that. are there opportunities to achieve. Thank
-
I have a SPA232D that I want to connect to a pre-existing network of SOHO, I looked for the network interfaces, I have a request. The current network has a router running NAT. What I expected to be able to do was to just add this phone to my LAN and
-
I get the 0x8004230F error code when you try to backup in Windows 7.
Original title: code 0x8004230F Backup do not work! I got the 0x8004230F code. What do I need to do?