Volume adjusts at random. Cannot control the volume with other software, ie iTunes.

Similar Questions

• Cannot close the first with other (LH one end) tab open are closed.

  Cannot close the first tab (end of LH we) but others are closing. Indicator download on tab keeps indefinitely - running windows under all the tabs are functioning normally.
  Open another copy of Firefox allows all tabs to work normally in this copy

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems

• Cannot control the use of database storage

  Hello

  I've just updated the vCenter Server from 5.5U1 to 5.5U2b. In 'Health Service', there are new warning message:

  "Cannot control the use of database storage. See VMware KB 2078305 for more details".

  I use MS SQL 2008 R2 SP1 Express, which is supported by this version of vCenter. There are also a lot of free space on the disk of the server (63 GB free). Ko 2078305 does not explain this particular warning message and the data of events for task and retention policy are also defined.

  So, what should be the problem? What are the conditions to trigger this alert?

  Thank you

  David

  Thank you so much Jogits you are right, I used google and find the solution on the blog below

  I put in sql db permission:

  use master

  go

  grant VIEW SERVER STATE to [vpxuser]

  go

  GRANT VIEW ANY DEFINITION to [vpxuser]

  go

  and after

  Restart the Vcenter, and is now GREEN

  Setting the server vCenter 5.5 & #8217; database question s followed by its use in the health service. Salt * wet * bytes

• Controlling the timeline with Touch and ScrollTop: the combination of the two?

  Hello!

  We try to combine the two scrolling on the edge features:

  (1) scrub the timeline with scrolling (to create Parallax), and

  (2) scroll to the bottom of the page with buttons, using scrollTop

  For cleaning of the timeline, we used excellent control calendar of Tim Jaramillo with key code (found here: http://forums.adobe.com/message/5058756#5058756)

  To scroll to the bottom of the page with buttons, we found excellent Heathrowe scrollTop code (here: http://forums.adobe.com/message/4733382#4733382).

  We do not seem to combine these two methods in a way that works. In my example below, the control, the Timeline with Touch code works fine, but the scrollTop button code does not work.

  Does anyone know how to make a scrub of the timeline, combined with navigation buttons?

  Example: http://www.bartmclaughlin.com/scrollTop/stage-scroll_with_scrollTop_v1.html

  Edge project: https://www.yousendit.com/download/elNLcXl0NEhJMHVFTmNUQw

  Any help much appreciated!

  Bart mclaughlin

  I think in the btn1 and btn2 click Manager you have to scroll the scene rather than the HTML and body

  as

  SYM. $('Stage') .animate ({scrollTop: element.offset () .top}, '800'); in btn1

  and

  SYM. $('Stage') .animate ({scrollTop: element.offset () .top}, '800'); in btn2

  Hope this is useful

• Controlling the timeline with Touch

  Hello! I use edge animated in adobe dps. I tried to control the timeline with the key (or scrolling) in the forum. Even some alternatives were considered, I have not found the perfect one. It can open so many possibilities as slideshows, Parallax, diagonal textscroll etc.

  I would like to build an extensive animation and control the scenario of scrub/shot with my finger.

  I found something that works, but it seems that directions works in adobe edge host plus. Anyone know how to fix this? Demofiles would be great.

  Here is the solution I found, which does not work on the last leg.

  http://codehandyman.blogspot.de/2011/12/Adobe-edge-animation-controlled-by.html

  And here is the result. Work on ipads in indesign dps:

  http://www.northeastmagic.com/adobeEdge/scrollbar_scrubber/test7.html

  Thank you

  Klaus

  Hey Klaus.

  Oddly, the example of codehandyman you posted don't use no events button at all, but rather slyly relies on the scroll event to control the timeline.

  I've referenced the link codehandyman, and the only change I had to do was to replace each occurrence of "this.element" with "e.currentTarget", in the Stage.scroll event. Thus, on Stage.scroll, this is the code I have (I tweaked a bit to make it more readable):

  var MonCalc = e.currentTarget.scrollLeft/(e.currentTarget.scrollWidth-e.currentTarget.clientWidth);

  var pos = Math.round (calc * sym.getDuration ());

  SYM. Stop (POS);

  The above code essentially the numbers on the scroll position, then figures this ratio depending on the length of the root timeline. This tells us when to jump to the timeline.

  You are referencing your blog link - to stop the scrolling, I had to open "xxx_edge.js" and delete this line:

  ['style', 'overflow', 'auto']

  and replace it with this:

  ['style', 'overflow-y', 'hidden'],

  ['style', 'overflow-x', 'auto']

  Example:

  www.timjaramillo.com/code/Edge/scroll_timeline

  Source:

  www.timjaramillo.com/code/Edge/_source/scroll_timeline.zip

• The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

  Original title: USB problem

  I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

  Hello

  Start Windows Explorer, and then see if there is a drive letter assigned for access to the
  drive. If this is not the case, check if the disc is shown in disk management.

  1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the left pane, under storage, click Disk Management.

  If there has made a right click option - assign a drive letter for you can use Windows
  Explorer to copy files.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot control the volume

  I have an Apple TV 4 (tvOS 9.2.1) with a Philips BDM4065UC 40 '' monitor (not TV) connected via HDMI. Everything works OK, except that I can't control the volume with the Apple Remote.

  In the volume control settings, I can choose between 'Auto', 'TV via IR' and 'Off '. Obviously 'Off' does not work. But not more than the other two.

  I asked Philips support if the BDM4065UC supports the HDMI-CEC, that I understand to be a sine qua non for Apple TV, and I'll make their response when I get it. However, I understand that the options 'Auto' and 'TV via IR' would not be displayed if HDMI-CEC was not taken in charge for the monitor.

  I can't form a new setting because the BDM4065UC is not a remote control to train with.

  I tried to use Apple's HDMI cable and the HDMI supplied with the BDM4065UC.

  Any thoughts?

  Steve

  I'm waiting for the volume of a computer screen (if it has speakers) to be flown by the device to which it is connected. The monitor is equipped with a remote control, otherwise I think he won't have the receivers to receive a signal from one.

• HP Pavilion 15 laptop: Cannot control the brightness of the screen

  Hello!

  I can't control the brightness of the screen of my laptop. The problem started about 2-3 days ago.

  I'm trying to fit it through the keyboard, and also through the power Panel, but it is still on the minimum brightness...

  I also noticed that the brightness of the keyboard keys are not functionnig well: when I click on one of them (more or less brightness brightness), it shows me the brightness slider, but he won't go up or down by pressure of the keys... only if I drag with the mouse. And yet, no adjustment of the brightness.

  Could you please help me?

  Thank you!

  Hello
  
  Install the graphics driver to leave either the Recovery Manager or your HP support page and restart the system after completing the installation.
  
  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03430118
  
  What is the exact model you are having?
  http://support.HP.com/us-en/document/c00033108
  
  Concerning
  
  Visruth

• Cannot control the color sensor in LabView for Mindstorms

  Hello!  New here.

  I'm currently boning on LabView via 'LabView for Lego Mindstorms' for a possible job in the near future, and I encountered a problem from the beginning.

  I am programming my brick Lego of LabView to simply activate the color sensor which is quite easy: I'm building a while loop and inside I have a block of color sensor attached to a block of text that displays the light intensity of the probe in the text on the brick.  I compile and run the detector turns on and I can read the intensity constantly updated on the brick.  This part works fine.  I would now like to control the light sensor (that doubles as a light source with color LEDs) on the front of the LV Panel.  The book I'm using (LabView for Lego Minstorms) says I should block sensor on the entry "generate light' do right click and choose"Create--> Control"in the menu that appears.  A Boolean command button should appear connected to the sensor block in the block Panel and a push button should appear in the front panel.  This is not what is happening.  Here, the two things are different.

  (1) I have no port "generate light" click on right-click.  This is probably using a version more day of Mindstorms that uses of the book.  It's a matter of book/Mindstorms, which probably cannot be resolved here but I hope that the next issue of problems will make it irrelevant.

  (2) I right click and create the control, but rather than create a Boolean command button as the book predicts, it creates an icon "BrickReference.lvclass".  He connects very well with the light sensor and a corresponding block is created in the front panel, but it is a paper weight that I can tell.  I can't do anything with it.  There are no buttons to push, no slider, button, button radio etc and I can't seem to change into something that somehow work.  I have delete and don't create a no kidding Boolean button from the library, but it does not connect to the photoelectric cell and so I can not compile.  So now, I'm a little stuck.

  I searched "Reference of the brick" online in the context of LabView class and have found little or nothing that talks about its definition or how I can use it to control the light via the front panel sensor.  Help with the software section is not much help, and yet I'm sure there must be a way to control a simple Lego light sensor of the façade for debugging purposes and others.

  If you know what I'm doing wrong or if you know a finish around this issue that will allow me to control a Mindstorms brick from the front in this way, please let me know.

  Thank you!

  Try to post in the forum of Lego.

  http://forums.NI.com/T5/LabVIEW-for-LEGO-MINDSTORMS-and/BD-p/460

• Satellite L355-S7817 - cannot control the default voice of Narrator

  I don't seem to be able to control the default voice on my L355-S7817 with Vista home OS.
  I changed Mrs Anna parameters but Toshiba male voice starts each time I use a program that uses the voice of the Narrator.

  I even uninstalled the engine from Toshiba, SR and the application without result!
  The male voice of toshiba is still present...

  Is there some sort of setting somewhere that I can use to overcome this control over speech applications by Toshiba?

  Thanks in advance.

  Hello

  To be honest, I've never used this feature, but I found a few useful details provided by Microsoft:

  Check this box:

  * Hear text read aloud with Narrator *.
  http://www.Microsoft.com/enable/training/windowsvista/Narrator.aspx

  * Change the Narrator voice settings *.
  http://www.Microsoft.com/enable/training/windowsvista/narvoice.aspx

  Maybe it could be useful

  Welcome them

• cannot control the digital state of slider

  Hello world

  Put a slider on the front panel with the displayed digital order. Then try to change the State of the cursor and the digital control: deactivate and activate the second. It seems that States can be changed independently. But this isn't the case. Digital control gets the State of the cursor...

  I tried to change it programmatically with the nodes of property but once again in vain.

  Is this a bug? If so, I do not understand why LV would allow users to change the properties of the digital control if in all cases, you must create a new one (totally independent this time) digital control.

  Thanks for your replies!

  Chris

  Superfunk wrote:

  Hello world

  Put a slider on the front panel with the displayed digital order. Then try to change the State of the cursor and the digital control: deactivate and activate the second. It seems that States can be changed independently. But this isn't the case. Digital control gets the State of the cursor...

  I tried to change it programmatically with the nodes of property but once again in vain.

  Is this a bug? If so, I do not understand why LV would allow users to change the properties of the digital control if in all cases, you must create a new one (totally independent this time) digital control.

  Thanks for your replies!

  Chris

  Digital is a child of the cursor and inherits the value of the slider as well as his State to disable enable.

  There is a case where the definition of properties separately are useful. If you customize the control, you can replace the digital with another type of indicator (a dial for example) where it is practical to be able to define its scope and properties (such as its colors of ramp).

  Ben

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• Cannot control the weight of the race on triangle

  Hello

  I created three shapes using the shape tool: a circle, a rectangle and a triangle (using the star tool and by decreasing the number of sides).

  I want to customize the weight of the race on these forms. I am able to customize on the square and the circle, but not on the triangle. How can I fix this?

  Thank you!

  Select the shape with the selection tool (just like the other two) and make your choice of formatting from the Panel control or stroke. Something must happen so a screenshot would be helpful: Please include the appearance Panel and the layers panel.

• Cannot control the film loaded

  A friend of mine is having bad controls a .swf which loads it into his film.
  
  This.loader_mc.loadMovie(_root.prAbsPath+"/360_"+vehicleName2+".swf");
  loader_mc.loadMovie ("360_fusion.swf");
  loader_mc.vehicle360.stop ();
  Stop();
  
  Thus, it is load the film 360_fusion.swf in loader_mc and then try to stop the movie to play... but it will not stop.
  
  Anyone see something wrong with that? He asks if I can help.
  
  Thoughts?

  You must wait until the loading is completed to control the loaded swf file.

• I have windows 7 ultimate. Cannot install the printer hp psc software 2410. How to rectify

  My laptop says cannot install the software. I tried all help. Unable to resolve.

  Hello

  According to the HP.com website, your printer driver is installed via Windows Update. The HP document that describes this process can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4063&product=303753&sw_lang=.

  Basically, you need to leave the laptop to start the Add New Hardware Wizard. You can facilitate this by going to control panel, select devices and printers, and when this window opens, select Add a device. Make sure that your printer is connected to your computer via a USB cable, the printer, before to start the wizard.

  Let me know if this helps you.

  Kind regards

  BearPup