Cannot control the volume

Similar Questions

• Volume adjusts at random. Cannot control the volume with other software, ie iTunes.

  I have a HP Pavilion dv7-7000 Quad. The music playback volume goes up and down. Also, I can't control the volume in itunes or winamp. If I turn the volume in itunes there for a while, but back down. When I turn the volume to 1% in itunes, it says there for a few seconds and it slowly rises to the top.

  I tried a lot of things trying to get this problem resolved and spent over 2 hours with HP tech rep:

  1 uninstall the audio driver, restart, install the driver.

  2 bios flash

  3 reinstall the sound driver using HP Recovery Manager

  4 Windows repair.

  5 Chkdsk

  The only thing that worked was

  Uninstalled the audio driver in Device Manager and is looking for new devices and installed windows automaticlly refreshment and it fixed the issue... * beep *? I had my helmet in the decision-making when the driver installed.

  I'm afraid to turn my computer off now.

• I divided a four track and now cannot control the volume of each

  I shared the original track so I could pan the new tracks to make it more interesting (each note is a drop of water...).  Which was not quite successful either, but it's the volume/speed that I can't understand.  I tried using automation volume, the sliders in the mixer, and even the speed settings in the piano roll.  Neither does the slightest bit of difference in one of the four new tracks.  Is there another place where I can adjust the volume?  Help, please!

  How do divide you the original track and how did you like the tracks you are trying to control? more information please...

• Trying to fix my sound. Gettinng "Windows cannot display the volume on the taskbar control because the keys control program has not been installed.

  original title: NO SOUND on MY WINDOWS XP

  I'm unable to install my Volume icon.  I went to the control panel and it tells me to go to add/remove programs.  I did all this AND still cannot get any sound on my Windowns XP.  I've exhausted ALL my options.  I need help please...

  Trying to fix my sound.  Gettinng "Windows cannot display the volume on the taskbar control because the keys control program has not been installed.  "To install it use Add/Remove programs in the control panel" that IS NOT WORKING

  Hello

  I'm assuming that you're missing sndvol32.exe
  Here is a download link:
  http://www.Firstload.com/?IR=1&fn=sndvol32.exe+download
  It may be useful
  Mike

• My windows cannot display the volume on the taskbar control, I think that volume control program is not installed, what should I do?

  My windows cannot display the volume on the taskbar control, I think that volume control program is not installed, what should I do?

  Have you tried the following tutorial?
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  The tutorial is for Vista, what operating system are you using?

  t-4-2

• Problems with the buttons that control the volume

  Hello everyone I hope you can help me. I had to reinstall the system on my laptop, everything is ok except for a problem, the software that controls the volume buttons are not displayed. If the work on screen, but I can't see if the volume or bass.
  Could you tell me what might happen. Thanks and forgive the inconvenience.

  Hi all I have solved the problem, as I'd mentioned the error is when you install the drivers and the order in which they are installed.

  First of all, install the file shortcut (8jvu20ww.exe)
  Once installed, you will be prompted to restart the system. Do not.
  Then install (g1ku20ww.exe) power management.
  Reinicir system and the problem is solved.
  A welcome message.

• Helmet of blackBerry Smartphones do not control the volume?

  Got my PRIV - a few days ago gorgeous!  Still working on understanding all the features and very impressed so far. Unfortunately, I can't get the headset to control the volume of the phone.  The only option seems to be to physically settle on the phone itself.   have you tried with the closed Blackberry headphones and earphones Apple earphones ground Republic - none are able to control the volume on the PRIV.  Please advise - it is an important issue for me, so I may have to return the phone if I can't get one of these (or other) headsets to work right. Thank you.

  I am now using Sennheiser M2 OEG headphones with a cord android announced for the Galaxy.  All controls work properly when listening to music via BlackPlayer E.G.  This includes the volume, pause and move forward.

  Visually, I see no difference between the Sennheiser sheet and on the BB M-430 headphones.  in other essays of the M-430, I found that the controls on it would increase volume and advance and break functions worked properly, but the '-' grew up Google voice rather than reduce the volume.

  I also tried the headset that comes with the private which I had not unpacked I think friction pained headphones very comfortable.  The button on those will stop and start the music but do nothing else.

  So the private seems to be picky about this headset is used with it but the controls on some, but not all, headphones will work correctly.  Ironically the Priv do not take care of Blackberry helmets.

• Control the volume of the multiple MediaPlayers - mediacontroller.h library of basic API

  Hello

  As I wrote

  http://supportforums.BlackBerry.com/T5/native-development/how-to-set-media-player-s-volume-in-QML/TD...

  I can't control the volume of a MediaPlayer object using myPlayer.setVolume ().

  I managed to set the volume to help:

  void ApplicationUI::setVolume(float val)
  {
      //audiomixer_set_output_level(AUDIOMIXER_OUTPUT_SPEAKER, val);
      mediacontroller_volume_set_level(val);
  
  }
  

  mediacontroller_volume_set_level() library of base API mediacontroller.h method.

  But it works on the single instance of MediaPlayer that I have on my QML, and I need to find a way to control the volumes of several players. How can I configure a specific MediaPlayer as "active" or "current" to call the

  mediacontroller_volume_set_level(val);
  

  Hi burakk,

  Please refer to your first forum post for the explanation and the code snippet on how to implement what you're trying to reach. I checked using the sample application 'nowplaying' that the MediaPlayer API setVolume method works as expected. I hope that helps!

• How to control the volume of the MediaPlayer?

  BB:Multimedia:MediaPlayer has all the features of load, play, pause the music, but I couldn't find anything which could control the volume.

  Of course you can adjust the volume for the whole of the device, but is it possible to adjust the volume for this object?

  For example - if you have a background music in an application - it'd have to allow the user to adjust the volume of it.

  Hello djogon,

  It is certainly a valid use case. However, the API of MediaPlayer Qt (QML, Qt/C++), so far, is mainly designed for simple multimedia applications, for audio & video consumption (in local or streaming).

  This feature is currently doable by the low-level C API only; by mmrenderer:

  In other words, if you were to apply to your use case, you would have to implement playback using the C API and wrapper classes to communicate with the user of Cascades UI elements.

  The function to control the volume, in a context of mmrenderer (C API) is documented here:

  http://developer.BlackBerry.com/native/beta/reference/mmrenderer_libref/topic/mmr_api/mmr_output_par...

  ---------------------------

  The best place to start would be to look at some of the native apps sample mmrenderer, high during the scanning level tutorials and documentation (pasted below):

  ---------------------------

  * Reading video sample application - code and tutorial with C API:

  http://developer.BlackBerry.com/native/beta/documentation/video_playback_overview_2006471_11.html

  https://github.com/BlackBerry/NDK-samples/tree/next/VideoPlayback

  ---------------------------

  * PlayAudio sample application: https://github.com/blackberry/NDK-Samples/tree/next/PlayAudio

  ---------------------------

  To wrap the C/C++ API in QObjects and contact the QML UI elements, if you have not come across this already, there are other examples of applications which shows how to do this. Like this one:

  * Kakel, Cascades sample application: https://github.com/blackberry/Cascades-Samples/blob/master/kakel/src/kakelapp.h

  ---------------------------

  Some links to the relevant documentation for mmrenderer:

  http://developer.BlackBerry.com/native/beta/documentation/com.QNX.doc.Mme.mmrenderer/topic/arch.html

  http://developer.BlackBerry.com/native/beta/reference/mmrenderer_libref/topic/mm-renderer_client_api...

  http://developer.BlackBerry.com/native/beta/documentation/com.QNX.doc.Mme.mmrenderer/topic/about.htm...

  ---------------------------

  I'll try to convince the API team to include this feature in the MediaPlayer Qt API as well (for future versions of the operating system). If you can file a feature request in the Developer incidents handler, that would certainly help as well. (of course, more people asking for a function API - more chances).

  Hope at least part of this aid.

  See you soon,.
  Rashid

• Cannot control the use of database storage

  Hello

  I've just updated the vCenter Server from 5.5U1 to 5.5U2b. In 'Health Service', there are new warning message:

  "Cannot control the use of database storage. See VMware KB 2078305 for more details".

  I use MS SQL 2008 R2 SP1 Express, which is supported by this version of vCenter. There are also a lot of free space on the disk of the server (63 GB free). Ko 2078305 does not explain this particular warning message and the data of events for task and retention policy are also defined.

  So, what should be the problem? What are the conditions to trigger this alert?

  Thank you

  David

  Thank you so much Jogits you are right, I used google and find the solution on the blog below

  I put in sql db permission:

  use master

  go

  grant VIEW SERVER STATE to [vpxuser]

  go

  GRANT VIEW ANY DEFINITION to [vpxuser]

  go

  and after

  Restart the Vcenter, and is now GREEN

  Setting the server vCenter 5.5 & #8217; database question s followed by its use in the health service. Salt * wet * bytes

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• How can I control the volume of a voice in a video + background music

  I would like to control the volume of a person speaking in a video and the volume of the background music independently of each other with two volume bars. The problem seems to control the voice of the video.
  
  What I can do... but not really wanted to do:
  (1) control the volume on voice and music at the same time (but not independently)
  (2) control the music but no voice
  
  Here is the actionscript code that controls music. The ActionScript of voices is considered as being almost totally similar.
  
  I use Flash 8. (Any flv) video name is LD
  
  bgSound2 = new Sound (this);
  bgSound2.attachSound ("Guitar");
  bgSound2.start (0, 99);
  bgSound2.setVolume (0);
  playB.enabled = false;
  slider2.slideBar2._x = 20;
  slider2.slideBar2.onEnterFrame = function() {}
  bgSound2.setVolume (0-(this._x));
  };
  slider2.slideBar2.onPress = function() {}
  startDrag (this, false, 280, this ._y, 0, this ._y);
  };
  slider2.slideBar2.onRelease = slider2.slideBar2.onReleaseOutside = function () {}
  stopDrag();
  };
  stopB.onRelease = function() {}
  bgSound2.stop ();
  playB.enabled = true;
  stopB.enabled = false;
  gotoAndStop ("playB");
  };
  playB.onRelease = function() {}
  bgSound2.start (0, 99);
  playB.enabled = false;
  stopB.enabled = true;
  } ; stop();
  
  Thank you
  Jens

  Thanks A.Arun,

  Here's what I did
  My "quick" fix was to place the two sounds, actionscripts to _root, using the video voice for first script sound and music in the second. I deleted the break buttons (because you can still lower level 0) and for the first script, I used:
  bgSound1 = new Sound();

  Now, I can turn the volume on the two sounds independently to the bottom to the top.

  Sincerely
  Jens

• Cannot change the volume control appleTV (4th generation)

  Hello. When I change the volume of my control the apple tv do not respond, I tried to change the hdmi and everythibg turned on and outside. I have also tried to change the settings of the tv and went to volume settings apple tv and custumething has changed several times, but it just does not work: / I just got the apple tv for like 1 day ago. Well, I hope you have understood my problem and have an answer for that. Thank you < 3

  Volume changes can be made by using the last Apple TV with Siri > control your TV or receiver with your Siri or Apple TV Remote - Support Apple Remote control

• Scrolling the mouse not working not not to scroll through the pages. cannot change the Volume control. How to fix?

  Original title: scroll of the mouse wheel only adjusts the volume. How to scroll through the pages again?

  Using the wireless mouse (Silvercrest MTS2218-m with win 7 x 64) and scroll wheel is no longer made scroll page up and down in any program. Only, it adjusts the volume. How to scroll through the pages again?

  Already checked the settings in Control Panel > mouse nothing obvious here to change this annoying feature. And have already uninstalled the driver for the mouse in Device Manager but no change. have also stopped and started several times laptop.

  Close to the scroll wheel is a dpi button, which can also be used to pass
  between normal mode and media holding for 3 seconds. In media mode
  the volume control wheel and does not scroll.
  Read the manual... ;-)

• Cannot place the Volume icon in the taskbar

  My desktop (Windows XP Home Edition, SP3) PC has problems with sound:

  The "Sound and Audio Devices Properties" window has 2 options in the box "Device volume" (in the middle):

  (1) 'Mute'.

  It works OK - I can check this option and sound is cut off, as required.

  (2) "volume icon to Place in the taskbar"

  I can't check this option to access the 'Advanced Options' button (bottom-right) and set other options of volume for 2 rear speakers (only 2 front speakers are currently operating).

  If I check this option, it fails with this MESSAGE of ERROR:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have NOT removed / deleted / Uninstall audio files, programs, etc., so I don't know how sound problems have been affected on my PC.

  Of course, I can't start the Volume control program, and I can't adjust any volume and sound on my PC settings. The volume icon is not displayed in the tray (taskbar, far right). Try to add the icon for the volume control for this notification area will fail with the above ERROR MESSAGE.

  I do not have the installation diskettes, so it is possible to download all the relevant sound files / applications directly and solve this problem (missing volume control program)? All the problems of sound worked beautifully until this volume control program "disappeared."

  Moreover, are these stored audio files as backups somewhere on my PC (for example some partition memory?), so I can put it directly in the Windows/Program files?

  Troubleshooting guides suggest lack file the SNDVOL32. EXE, but c:\windows\system32\dllcache fact containing SNDVOL32. EXE - of course, this file is not missing, but may be damaged / corrupted, so unusable and inaccessible, as if not found (MESSAGE of ERROR above).

  Please notify. Thank you kindly.

  The dllcache folder is where XP guard backup copies of important files and does not come into the game normally and XP will be running fine without this folder (but you don't want to delete it).

  If one 3498 files that Windows file protection is missing, PAM retrieves the backup copy in the dllcache folder quickly and silently, replace the missing file.

  When you use certain features sounds and Audio devices if you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  Or this:

  Windows cannot execute SndVol32.exe, use Add/Remove Programs Control Panel to install.

  Looks like thesystem32\sndvol32.exe file c:\windows\ is missing.

  As the sndvol32.exe is one of 3498 Windows File Protection files handles, should never be missing.  To be absent would require an extra effort.  If it happens never missing in the system32 folder, WFP will be want to quickly and quietly replace it if he can.

  This may occur if your antivirus/antimalware application unspecified thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system (if you can find one.)  Sometimes even the backup copy is quarantined (effectively removed)

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP retains backups of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy or press Ctrl-C (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you can only see a file named "sndvol32" which has an icon that looks like to the volume control slider (this is the file you need) or adjust the settings of the browser under Tools, Folder Options, view and uncheck "Hide extensions for known file types" you can see the file extensions.  You can check that box again when you are finished, if that is your desire.

  If the file is missing in the dllcache folder, look for a copy of the file in this folder (you maybe not this file):

  c:\windows\ServicePackFiles\i386

  After copying the file, navigate to the following folder:

  c:\Windows\System32

  Right-click on an empty area in the c:\windows\system32 folder display window and select Paste (Ctrl + V) to paste into the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Now try your features sounds and Audio devices.

  If you can't find the file on your system, there is one on my SkyDrive and you can download it.