Cannot control the film loaded

Similar Questions

• Cannot get the film loader to work

  I have trouble getting my animation Flash loader file works. I created 3 movies test (1.swf, 2.swf, 3.swf). Each of the test file has long been a second. Everything they do is display a number. In my loader file, I load the test files a second part. The first two movies load very well, but instead of loading the third film the charger makes a loop to the first image and start again. The last film is ignored even when I place the order. For example, 3. SWF does not charge for 1-2-3, and does not load swf 1. 3-2-1. here is the actionscript code that I used. Anyone know how I can fix this problem? I am using Flash CS5. Thank you

  Stop();

  unloadMovieNum (1);

  loadMovieNum ("1.swf", 1);

  **************************

  Stop();

  unloadMovieNum (1);

  loadMovieNum ("2.swf", 1);

  **************************

  Stop();

  unloadMovieNum (1);

  loadMovieNum ("3.swf", 1);

  The reason why I'm a little confused, you're not using stop(), so I wonder how your timeline is to progress beyond. The loaded SWF files needs to communicate with the main timeline or your main timeline look the _currentFrame of the clip loaded into waiting so that she reaches _totalFrames.

  Here is an example (sans-stop ()) in saved AS2 until CS5 (I can't go lower) who did what you describe and works perfectly fine for me:

  http://www.ERTP.com/tmp/LoadMovieNum.zip

  Is there a difference between that and what you do, and this simple example works for you?

• Control the main storyline of the film loaded

  I loaded an external film on the main movie in a movie clip called "mainholder" - in the main storyline on the main sequence there is a command to 'stop' on frame 1. The film loaded, I want to control the main timeline and tell him to go to frame 2. Can someone tell me the actionscripting to do this, I have tried several commands and frustrated. ;-)
  
  Thank you

  OK... _ is necessary to _parent and _root... all other instance names are called by their name on the timeline then... in the case of this file, try this

  {We (Release)}
  unloadMovie (this._parent.loadsgPhotosMain);
  }

• After update of Windows 7 with the last KB 'Reliability' updates, wouldn't Boot: Boot mgr failed, cannot find the OS loader

  After that update of Windows 7 with 5 ~ updates which mainly provided increased reliability, these KBs wound up loader of Windows BOOT OS/corrupt the rupture.

  Root cause found:
  ----------------------
  Boot Manager cannot find the OS loader

  Repair action: repair of files
  Result: failed. Error code = 0xa<---- next="" repair,="" this="" changes="" to="">
  Time taken = 4206 ms

  Repair action: repair store boot configuration data
  Result: Has no = 0 error code x 490
  Time taken = 221 ms

  Repair action: System Restore
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 44444

  How to search through my hard drive to find updates KB which is the origin of my computer to lose its bootloader/OS and not starting?  What KB update is initially the charger operating system not found when everything worked very well, before these 5 updates.

  What are the solutions?

  Try the Forum updated; It includes questions of XP, Vista and Windows 7 update:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot control the use of database storage

  Hello

  I've just updated the vCenter Server from 5.5U1 to 5.5U2b. In 'Health Service', there are new warning message:

  "Cannot control the use of database storage. See VMware KB 2078305 for more details".

  I use MS SQL 2008 R2 SP1 Express, which is supported by this version of vCenter. There are also a lot of free space on the disk of the server (63 GB free). Ko 2078305 does not explain this particular warning message and the data of events for task and retention policy are also defined.

  So, what should be the problem? What are the conditions to trigger this alert?

  Thank you

  David

  Thank you so much Jogits you are right, I used google and find the solution on the blog below

  I put in sql db permission:

  use master

  go

  grant VIEW SERVER STATE to [vpxuser]

  go

  GRANT VIEW ANY DEFINITION to [vpxuser]

  go

  and after

  Restart the Vcenter, and is now GREEN

  Setting the server vCenter 5.5 & #8217; database question s followed by its use in the health service. Salt * wet * bytes

• help with the menu button and the film load

  Hi all... I am very new to flash and actionscripting and I am self-taught using mainly Internet searches.
  I'm building a site with a menu and a banner that is controlled by the menu (two swf files). I got to the make contact however, I'm stuck at this point.
  When 'bt_1' is hit I would like to be respected a "mv_1" to load in the banner.swf with intro animation... this I figured out how to... but now when you click on "bt_2" I want to play the rest of the animation of "mv_1" to unload the film before loading "mv_2" with its animation enterance respected... that I would make to several buttons. The method that I use for my local connection is...
  
  Sending script
  mySender = new LocalConnection();
  on (release) {}
  ------each button corresponds to a different setting... 1,2,3,4,5,6
  _root.mySender.send ("menuconnect", "action", 1);
  ------This is the best way that I could understand to disable the buttons appropriate... There might be a better way?
  Home.Enabled = false;
  couple.enabled = true;
  Events.enabled = true;
  Bridal.enabled = true;
  Media.enabled|disabled = true;
  RSVP.enabled = true;
  }
  
  
  
  Script of reception
  
  myReceiver = new LocalConnection();
  myReceiver.action = {function (doThis)}
  If (this == 1)
  gotoAndPlay (2);
  If (this == 2)
  gotoAndPlay (3);
  };
  and so and soforth for all six buttons
  myReceiver.connect ("menuconnect");
  
  If all this makes no sense at all, I'm sorry... I tried my best...
  If some pro out there can understand what I'm trying to do and can help me I would greatly appreciate it... Thank you all
  
  SJS

  I would like to use the ID to link to each of your mv_1, mv_2 etc. in the main stage and control them. This would have the advantage of eliminating the duplication of code and keeping most of your code in one place (image 1 of your _root timeline).

  If mc_1 etc was connection id mc_1ID etc, the other began on a frame labeled "outro" and ended on the last image, you can use:

• Cannot control the color sensor in LabView for Mindstorms

  Hello!  New here.

  I'm currently boning on LabView via 'LabView for Lego Mindstorms' for a possible job in the near future, and I encountered a problem from the beginning.

  I am programming my brick Lego of LabView to simply activate the color sensor which is quite easy: I'm building a while loop and inside I have a block of color sensor attached to a block of text that displays the light intensity of the probe in the text on the brick.  I compile and run the detector turns on and I can read the intensity constantly updated on the brick.  This part works fine.  I would now like to control the light sensor (that doubles as a light source with color LEDs) on the front of the LV Panel.  The book I'm using (LabView for Lego Minstorms) says I should block sensor on the entry "generate light' do right click and choose"Create--> Control"in the menu that appears.  A Boolean command button should appear connected to the sensor block in the block Panel and a push button should appear in the front panel.  This is not what is happening.  Here, the two things are different.

  (1) I have no port "generate light" click on right-click.  This is probably using a version more day of Mindstorms that uses of the book.  It's a matter of book/Mindstorms, which probably cannot be resolved here but I hope that the next issue of problems will make it irrelevant.

  (2) I right click and create the control, but rather than create a Boolean command button as the book predicts, it creates an icon "BrickReference.lvclass".  He connects very well with the light sensor and a corresponding block is created in the front panel, but it is a paper weight that I can tell.  I can't do anything with it.  There are no buttons to push, no slider, button, button radio etc and I can't seem to change into something that somehow work.  I have delete and don't create a no kidding Boolean button from the library, but it does not connect to the photoelectric cell and so I can not compile.  So now, I'm a little stuck.

  I searched "Reference of the brick" online in the context of LabView class and have found little or nothing that talks about its definition or how I can use it to control the light via the front panel sensor.  Help with the software section is not much help, and yet I'm sure there must be a way to control a simple Lego light sensor of the façade for debugging purposes and others.

  If you know what I'm doing wrong or if you know a finish around this issue that will allow me to control a Mindstorms brick from the front in this way, please let me know.

  Thank you!

  Try to post in the forum of Lego.

  http://forums.NI.com/T5/LabVIEW-for-LEGO-MINDSTORMS-and/BD-p/460

• Cannot control the volume

  I have an Apple TV 4 (tvOS 9.2.1) with a Philips BDM4065UC 40 '' monitor (not TV) connected via HDMI. Everything works OK, except that I can't control the volume with the Apple Remote.

  In the volume control settings, I can choose between 'Auto', 'TV via IR' and 'Off '. Obviously 'Off' does not work. But not more than the other two.

  I asked Philips support if the BDM4065UC supports the HDMI-CEC, that I understand to be a sine qua non for Apple TV, and I'll make their response when I get it. However, I understand that the options 'Auto' and 'TV via IR' would not be displayed if HDMI-CEC was not taken in charge for the monitor.

  I can't form a new setting because the BDM4065UC is not a remote control to train with.

  I tried to use Apple's HDMI cable and the HDMI supplied with the BDM4065UC.

  Any thoughts?

  Steve

  I'm waiting for the volume of a computer screen (if it has speakers) to be flown by the device to which it is connected. The monitor is equipped with a remote control, otherwise I think he won't have the receivers to receive a signal from one.

• Satellite L355-S7817 - cannot control the default voice of Narrator

  I don't seem to be able to control the default voice on my L355-S7817 with Vista home OS.
  I changed Mrs Anna parameters but Toshiba male voice starts each time I use a program that uses the voice of the Narrator.

  I even uninstalled the engine from Toshiba, SR and the application without result!
  The male voice of toshiba is still present...

  Is there some sort of setting somewhere that I can use to overcome this control over speech applications by Toshiba?

  Thanks in advance.

  Hello

  To be honest, I've never used this feature, but I found a few useful details provided by Microsoft:

  Check this box:

  * Hear text read aloud with Narrator *.
  http://www.Microsoft.com/enable/training/windowsvista/Narrator.aspx

  * Change the Narrator voice settings *.
  http://www.Microsoft.com/enable/training/windowsvista/narvoice.aspx

  Maybe it could be useful

  Welcome them

• HP Pavilion 15 laptop: Cannot control the brightness of the screen

  Hello!

  I can't control the brightness of the screen of my laptop. The problem started about 2-3 days ago.

  I'm trying to fit it through the keyboard, and also through the power Panel, but it is still on the minimum brightness...

  I also noticed that the brightness of the keyboard keys are not functionnig well: when I click on one of them (more or less brightness brightness), it shows me the brightness slider, but he won't go up or down by pressure of the keys... only if I drag with the mouse. And yet, no adjustment of the brightness.

  Could you please help me?

  Thank you!

  Hello
  
  Install the graphics driver to leave either the Recovery Manager or your HP support page and restart the system after completing the installation.
  
  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03430118
  
  What is the exact model you are having?
  http://support.HP.com/us-en/document/c00033108
  
  Concerning
  
  Visruth

• Volume adjusts at random. Cannot control the volume with other software, ie iTunes.

  I have a HP Pavilion dv7-7000 Quad. The music playback volume goes up and down. Also, I can't control the volume in itunes or winamp. If I turn the volume in itunes there for a while, but back down. When I turn the volume to 1% in itunes, it says there for a few seconds and it slowly rises to the top.

  I tried a lot of things trying to get this problem resolved and spent over 2 hours with HP tech rep:

  1 uninstall the audio driver, restart, install the driver.

  2 bios flash

  3 reinstall the sound driver using HP Recovery Manager

  4 Windows repair.

  5 Chkdsk

  The only thing that worked was

  Uninstalled the audio driver in Device Manager and is looking for new devices and installed windows automaticlly refreshment and it fixed the issue... * beep *? I had my helmet in the decision-making when the driver installed.

  I'm afraid to turn my computer off now.

• Project cannot find the files loaded each time.

  When I opened my project, several files are not found during the research/loading phase until the project is actually open, and the "Search _ VI Named" window appears. The window opens in the same directory displayed in the "loading:" field and the file is there. I have to select the file and click OK to load the file manually. This happens for 50 files. It is quite tedious and takes a long time to open and it happens everytime I load the project.

  I tried opening the project, make a backup of all and then closing and reopening, which did not help to solve the problem. I have to mention that I was working on VI of script and modify these files from another project, so I think I might break a link to the project somehow. Does anyone know how I can force the project actually find these files when loading?

  Thanks in advance for the help.

  Thanks for the suggestions everyone. I was able to solve the problem by deleting all files in the project and time them. I had tried before but must have done something different this time.

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• Windows Movie Maker-cannot save the film project

  Save movie maker file as a movie file.

  When I try to save my project, I get an error message cannot save the movie to the specified location. This is a short video just a minute and a half or more. I have herd that if you owe a lot of stuff in there it will not save. I cut small pieces of clips and them repeated once or twice more as 3 - 5 times could this be it? What should I do to solve this problem and save it?

  When I try to save my project, I get an error message cannot save the movie to the specified location. This is a short video just a minute and a half or more. I have herd that if you owe a lot of stuff in there it will not save. I cut small pieces of clips and them repeated once or twice more as 3 - 5 times could this be it? What should I do to solve this problem and save it?

  ==============================
  More than likely one or more of your source
  the files are not compatible with Movie Maker.

  See the following article:

  Movie Maker - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• img src in the film loading

  Hi all
  It could be very simple, but for the life of me I don't see how.
  
  All I want to do is load a success coutner preset from my hosting in a box on my site - the meter is defined as linked reference img src: < img src = / tinc? key = nZOEpLjD >
  
  I put a box on the page and location in Flash animation and baptized as Counter_Box. This is the script in the actions that I use for the counter in the Coutner_Box:
  
  loadMovie ("< img src = / tinc?") ("key = nZOEpLjD >", Counter_Box);
  Stop();
  
  When the page loads, it removes just the Counter_Box and no hitcounter appears.
  For a demo, see the contact page of the site: www.pumaknight.co.uk. The meter must be at the bottom left of the screen.
  
  I hope you can help.
  
  Thanks in anticipation,
  Michael H text

  just checked: you create a textField instance and give it the name of the instance of 'counter_txt' in the MC 'Counter_Box '? And did this code placed within the Counter_Box timeline?