Volume icon disappeared after updates... cannot be displayed in the taskbar

Similar Questions

• A6000 more Twitter icon disappeared after update of Lollipop

  After updating my phone crashed. He resurrected himself, when I rebooted several times. Now the Twitter icon has disappeared. I can start it by typing Twitter on Google widget, I can also launch it from Google through my Apps. How can I get the icon back? I tried to reinstall mNy times without success. Help, please.

  Note from the admin; type of phone and ROM version added to the object (assuming the others offer the correct information)

  Factory reset solved all the problems.

• After the installation of the updates my volume icon disappears

  After the installation of the updates my volume icon disappears, I go to properties to fix and the volume box is grayed out.  I was able to fix one or two times but now even my button mute won't turn on or off the volume.  All the sounds disappeared.  How can I solve this problem and it will never stop? !

  FYI I am computer illiterate in terms of big computer so be gentle!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it (Audio) > download/install the.

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Read the tutorial above on how to solve this problem.

  See you soon.

  Mick Murphy - Microsoft partner

• I am running windows xp sp3, the volume icon disappears from the taskbar on each reboot or shutdown/startup.kindly, help any permanent solution known.

  Hello!
  I am running windows xp sp3, the volume icon disappears from the taskbar on each reboot or shutdown/startup.kindly, help with any permanent solution known.i should go to the control panel and to recover it again whenever I turn my on.kindly advice, someone machine me a solution permanently this problem.i want to stay always on the taskbar the volume icon.
  the honest answer is expected... Thank you!

  Hello

  Try this:

  Control Panel - device - sounds Manager - note manufacturer device name and info on the graduating model.
  Double click and get the date and version of the driver (if 06 are dates, you use the default windows driver). Now
  Click the DRIVER UPDATE (this can not find anything because MS is far behind the certification of drivers). Now LAW
  CLICK above and UNINSTALL - REBOOT - it will refresh the driver stack.

  Now, go to the manufacturer of the system and recover the last pilot audio/Hi-Fi as a fall.

  Download it - SAVE - go to where you put it - RIGHT CLICK top - RUN AS ADMIN - REBOOT

  Now do the same for the manufacturer of the device (the one that made the device - if you were using the default windows
  you might need to look in the Device Manager - his new driver).

  Often, you will need to run the sound card drivers several times to get the latest version installed and will appear in
  Manager - Sound. This is because they make back the drivers one at a time and then finally install the
  most recent. Look in the Device Manager to be sure that you have installed the version of the driver is the one showing, if not
  run the driver again (reset each time) until the shows a correct.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Rob - bicycle - Mark Twain said it is good.

• application nike + ipod disappeared after updating to IOS 9

  application nike + ipod disappeared after updating to IOS 9

  Can you help me?

  How to get back to IOS 8.4.1

  Best regards

  DILPRINCIPE

  There is no restore IOS. It seems that Nike was not interested in the old app/device support. There is a Nike + running app that you can get to replace that uses the accelerometer in your device iOS instead of the Nike sensor +.

  TT2

• CD drive icons disappeared after I installed the Norton Recovery tool

  Original title: My CD drive icons disappeared after I installed the Norton Recovery tool

  I downloaded Norton Recovery tool, created the rebootable disc. Tested, everything OK. Then found all my readers of DVD disc including a player clone of Ebly, disappeared from "My Computer". They are always in my device manager, but have a yellow tag attached to each of them.
  Can someone tell me how to get back them?

  Good... got to step 5, then got confused (never been here before). Are you telling me to delete point 4, 4 d 36965 - etc? Or lower and upper values in mentioned in step 5

  Locate and then click the following registry subkey: this will expand the content of the key in the right pane of Regedit.

  
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  
  In panel right, if you have UpperFilters, right-click UpperFiltersand then click Remove.

  Click Yes to confirm the deletion of the UpperFilters registry entry.

  In the right pane, if you LowerFilters, click LowerFilters, and then click Remove.

  Click Yes to confirm the deletion of the LowerFilters registry entry.

  Exit the registry editor and restart the computer.

• System for power and volume icons disappeared.

  Original title: System icons

  My system for power and volume icons disappeared and I can't click on them to restore. I have a personal laptop and no system administrator I know. I don't remember doing anything unusual. They were here 1 day and went on the other.

  Hello

  Try Method 1 and if it is not available, try Method 3 in the link:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can also try a system restore to before that was the problem:

  «How to make a Vista system restore»

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• The volume icon disappeared off the coast of the Notification area.

  Original title: replace the Volume icon in the Notification area

  The volume icon disappeared off the coast of the Notification area in the lower right of the screen. Help me please replace it as I use it a lot. Thank you

  1 Please reboot nothing so interfere with this process.

  Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
  Then, use this link. (Ditto for power, clock and network.)

  How to enable or disable the system tray in Vista icons (there are several methods
  "(et vous devrez peut-être utiliser l'ensemble)."
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Wyse V30LE VNC disappeared after update

  Wyse V30LE VNC disappeared after update

  Is it possible to restore the software TighyVnc on firmware for Wyse V30LE was last updated?

  Hello Rogerio,

  Do you like the answer.

  One of my superiors I shared the add-on remote shadow for CE device yesterday. I downloaded for the link below.

  App.Box.com/.../y1axhtd69hqmzcaygle9crwx8cfkyrf8

  I tried to install on my workstation and VNC has been successfully installed.

  Hope this helps someone to solve the problem of the shadow (VNC) remote on thin client with B674 V6.0.

  Thank you

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• Windows Firewall settings cannot be displayed because the associated service is not running

  I get the message 'Windows Firewall settings cannot be displayed because the associated service is not running' when I try to restart my windows firewall, followed: due to an unidentified problem, windows cannot display settings.

  Can someone help me? I want to restart my windows firewall, which recentloy has stopped working.

  Hello

  No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
  is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
  than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
  you are, of course, that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• The event log online help cannot be displayed because the default browser could not be started. Class not registered

  Hello. I live in Brazil, Rio de Janeiro and already installed W8 Pro original Microsoft license.

  When I need to use the event online Help Viewer, a reception this message - the event log online help cannot be displayed because the default browser could not be started.  Class not registered.
  Help, please.
  Thank you
  Carlos.

  Hi Carlos,

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the question, I understand that you are not able to access the online help for Event Viewer.

  1. do you receive an error message when you try to open the online help for Event Viewer?
  2. who is the default browser on your computer?

  Method 1:

  
  

  "The event log online help" her will bring you to the following Web page:

  http://www.Microsoft.com/technet/support/ee/ee_basic.aspx

  I suggest you try to access the above mentioned Web page to see if it works.

  Method 2:

  You can see the article mentioned below for how to set Internet Explorer as default browser.

  Make Internet Explorer your default browser

  http://Windows.Microsoft.com/en-us/Internet-Explorer/make-IE-default-browser#IE=IE-10

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• Impossible to make it appear in the volume icon notification area. Have you tried all the procedures of sugested suggested on Microsoft Help.

  Impossible to make it appear in the volume icon notification area.  Have you tried all the procedures of sugested suggested on Microsoft Help.

  Try this:

  In the run box type: regedit, click OK
  Navigate to:

  HKEY_CURRENT_USER
  \SOFTWARE
  \Microsoft
  \Windows
  \CurrentVersion
  \Explorer
  \TrayNotify

  Right-click on icon stream, click on remove, restart your computer.
  The icon stream all will return.
  This works on most of the configurations.
  You may need to do a few times.

• Printer properties cannot be displayed. The print spooler is not running.

  I followed the MS KB "file sharing and printers with different versions of Windows" for instructions on connecting my new Win 7 PC to several domestic XP PC in my network. However, once that I had on the right by clicking on the printer for XP to share, popup message "printer properties cannot be displayed. The coil of the printer does not work. This has happened even when clicking on the properties of the printer. I'm stuck now and need guidance on what to do. Thank you!

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!