Volume on the computer controls
I have a windows 7 and the keyboard volume controls do not work how to operate again
* Proposed by the moderator of "Windows/Windows 7 / Windows Other apps" for "Windows / Windows 7/Hardware & drivers."
If you try to change the volume of the keyboard, you need to talk or see the instructions that are specific to your particular keyboard model.
I suggest that you use either the volume of your speakers or the bottom left you screen (a very small speaker). Just click on the small speaker and drag the cursor upwards or downwards for the volume change.
Tags: Windows
Similar Questions
-
Original title: the headphone volume
How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear
Hello1. who is the operating system installed on the computer?
2. What is the brand and model of headphones?
3A this works much earlier?
4. What is the brand and model of the sound card?5. have you ever tried to play the Audio using different media player applications and check?6. have you tried to connect the headset to another computer or phone and check if it works well?I suggest you follow these methods and check.Method 1: Run the audio troubleshooter.Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience storeMethod 2: Set the earpiece/microphone as default device and check.a. right click on the volume icon in the system tray at the right corner on the desktop.b. Select the playback device, go to torecording tab.c. make a right click and headphone/microphone as the default device.d. click on apply and ok.If above steps fails, proceed to method 3.Method 3: I suggest to disable the improvements and check.a. right-click on the icon "speaker" at the bottom right of the screen.b. Select "playback devices".c. right-click on the helmet.d. Select Propertiese. click improvementsf. check Disable all improvementsg. click OKYou can read this article for more information:Tips for solving common audio problems
You can also contact the manufacturer of headphones and check.I hope this helps! -
original title: NO SOUND on MY WINDOWS XP
I'm unable to install my Volume icon. I went to the control panel and it tells me to go to add/remove programs. I did all this AND still cannot get any sound on my Windowns XP. I've exhausted ALL my options. I need help please...
Trying to fix my sound. Gettinng "Windows cannot display the volume on the taskbar control because the keys control program has not been installed. "To install it use Add/Remove programs in the control panel" that IS NOT WORKING
Hello
I'm assuming that you're missing sndvol32.exeHere is a download link:It may be usefulMike -
My windows cannot display the volume on the taskbar control, I think that volume control program is not installed, what should I do?
Have you tried the following tutorial?
http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.htmlThe tutorial is for Vista, what operating system are you using?
t-4-2
-
Last week my computer no sound. I went into the Control Panel, checked mixer, everything seems fine. I am not all that computer savy so don't know what to do next. Thank you
Hello
Try the following.
Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.
Locate the KB2962407 update, right click and choose uninstall. Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates". You will see the update that you have uninstalled just offered once again - right click and select "Hide update".
When windows has reloaded, use the Recovery Manager to reinstall your original IDT HD Audio driver as it is stated in the document at the link below.
Kind regards
DP - K
-
Problem with the volume on Satellite Z30 control - A
Hello
I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.
See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)
Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.
If I use external speakers that connect via USB (Logitech Z305) it works perfectly.
I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.
I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.
Any idea?
Thank you very much
PHILIPPE
Hello
According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
That's why the Realtek HD audio Manager software should be available in the control panel.Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.
In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
This software provides audio improvements in your computer.To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.
-
I have Windows 7-64 bit. My resolution of the Office has also been affected, the bar downstairs is gone and all access to the computer control panel... Does that mean I need to restore or remove facilities? If so, how?
Reboot it again and see if the problem goes away.
Sometimes a 2nd reboot solves the problem, sometimes not.
Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
Drive C does not appear in the computer management window.
Hello
In the window of the computer storage management > disk management, I have see my drive C. CD - DVD drive and an external DVD drive only is displayed. C drive is not there. When I look under the disk defragmentation, the C drive is.
What gives?
Thank you
Hello
Use the Diskpart utility and check if it lists the C drive. Thelist volume command will provide information about each volume in the computer.
a. Click Start and then click Run.
b. now, type cmd in the text box and press on enter to open the command prompt.
c in the command prompt, type diskpart.exe press ENTER.
d. Enter the following command in the utility diskpart and press ENTER:
the list volumeCheck if drive C appears in the list.
See this article for more information about the Diskpart utility:
http://support.Microsoft.com/kb/300415Kind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
HP Photosmart C7283 - cannot scan to the computer
Sorry I'm not a guardian that someone made a joke, I'm just a frustrated user of HP
Recently I had to buy a new office count runinng Win7/64 Home Premium SP1.
The printer is configured as a member of the home wireless network.
After reinstalling the HP software
/PS_AIO_02_Net_Full_Win_WW_130_140.exe/
and
/CPE_SCAN_DESTINATION_UPDATE_hpcom_001_003.exe/
I'm not able to scan a document into the computer, control printers screen nor the Hp Solution Center.
I am constantly a msg of error with a 4, [(3,42,0) extended error]
Can someone me work around this problem help pls
S. stef, Israel Tel Aviv-Jaffa
Just a frustrated user
Thanks for your efforts, but nothing's done sofar.
I found the solution elsewhere on this forum trying to decipher the code erroe himself.
It's here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Windows-7-and-scanning-crash/td-p/283209
The problem is in DPI of the screen.
Sorry I can't give you any cudos at this time.
Good bye
-
Lost my icon of audio, now I can't control the volume on my computer
Hello
I am unable to turn on the sound on my computer icon. I can't reduce or increase the sound. How can I turn on system icon.
Thank you
Hello
Did you change your computer before this problem?
Follow the suggestions and see if it helps.
Method 1
See the article and then check.
Change icons appear in the notification area
http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area
Method 2
Follow the steps in the article.
System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
http://support.Microsoft.com/kb/945011
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registrySee also:
Adjust the sound level on your computer
http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer
-
HP ENVY laptop - 15 - ae101no: control of the Volume on the keyboard keys do not work!
Hello
Volume control keys had suddenly stopped working, and I have no idea why. I have the model HP ENVY laptop - 15-ae101no (ENERGY STAR). Could you please help me fix it? Thank you!
Hello
Try the following.
Download Realtek HD Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74867.exe
When finished, press and hold the Windows key and press R
In the run window, type devmgmt.msc and press to enter.
In Device Manager, expand sound, video and game controllers. Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72105.exe
When the reinstallation of Chipset is finished, stop the laptop.
Disconnect the power adapter and then hold button power supply for 30 seconds, then release.
Plug the power adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation. Once this done, reboot the laptop and let windows load completely for a few minutes before checking.
Kind regards
DP - K
-
I myself blocked on my computer. I didn't know that Apple was the administrator of the computer, and I was a user. I turned on the 'enable parental control' to limit the spending of my adolescence, while using my apple ID. I didn't know I was putting controls on myself. I tried everything-
(1) connected on Mac of my son tried to remote access, file sharing, etc. He is a Director on his computer, and we've even created a new user on his computer. Nothing has worked.
(2) tried questions help and support, impossible to find a way around it.
(3) I've changed my password, now I can't even shut down the computer.
I can't believe that this happened to someone, somewhere, and it's so easy to do.
Help, please! I tried everything-
Please take these steps to restore the privileges on your account. This somewhat tedious procedure is only necessary if you have verified that no work administrator account exists on the system.
If you do not already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need advice. You won't need the backup unless something goes wrong, which is always possible.
Step 1
Start in recovery mode. The OS X Utilities appears.
Step 2
This step only if you use FileVault 2. Start utility disk, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.
Step 3
Select
Utilities ▹ Terminal
in the menu bar. In the window that opens, type this:
resetp
Press the tab key. The partial order you entered will automatically end this:
resetpassword
Press return. Opens a window to reset the password. Select your boot if not already done volume. Pull down the menu option
Select the user account
and select
Administrator (root)
Follow the prompts to set a password. It is safer to choose a password that includes only the characters a - z, A - Z and 0-9. I suggest that you write the password. If you don't write it down and forget about it, you will start again at step 1.
Select
▹ Reboot...
in the menu bar.
Step 4
This step, as step 2, applies only if you use FileVault. Sign up as usual, then select
▹ Disconnect...
from the menu bar or press shift-command-Q key combination. Do not restart. You go back to the login screen.
Step 5
On the login screen, click on the other... Enter 'root' (without the quotes) in the name field and the password set in step 3 in the password field. You should now be logged in as root. It is a potentially dangerous situation. Do nothing by being logged in as root except as indicated below. You'll be fine as long as you don't dismiss the plan.
Open the preferences users and groups window. Select your usual administrator account from the list of users and check the box marked
Allow the user to administer this computer
You will be prompted to restart. Do this and log in as yourself, not as root. Your administrator status should now be restored.
Step 6 (optional, but recommended)
Follow the instructions in this article to support under the title "disable the root user. You must authenticate in directory utility as a 'root' with the password set in step 3. As another administrator authentication will not work.
Credit for this idea of NCP member wessongroup.
-
The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP
Hello
Control Panel - SOUNDS - Audio peripheral devices configuration-manager
Make sure you write down the description and model double click top - tab drivers - write version. Now
Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.If your driver shows 06 you have the default windows and part of the question.
Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
Put them - right click on Reboot - RUN AS ADMIN -.Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
Just make sure that the version you have installed appears in the tab of the driver.Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html---------------------------------------------------------
After the updated driver.
Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
and show disabled devices - check your micro - highlight them, then lower right properties. Do
of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
and APPLY / OK changes.Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
is the RealTek Audio Manager, yours can be quite different name if you have one.How to activate Audio devices hidden in Vista
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer
http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspxProblems with sound and audio or no sound - a Mr Fixit
http://support.Microsoft.com/GP/NO_SOUNDI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Hello
I come from Apple TV.
When turning on our ATV volume it triggers that our volume of receiver Denon drifting slowly to maximum or minimum-, it takes about 1 min to do this.
Tried to connect directly to our Denon receiver and our Sony TV ATV. Problem happens in two configurations. I tried different options to turn off the smart controls which offers the latest HDMI - ATV standard both our TV (for example, disable the automatic volume control).
By turning the ATV and the new (menu system) will stop the problem for awhile - but same problem returns after 1 to 5 mins.
I spent 8 hours in the last days trying to make it work. Looks like a bug in the SW of the ATV? (i.e. Disabling smart control of ATV does not take effect).
Desipite being impossible to use, I don't want to damage my 20K speaker system. I am close to my unit back and get a Chromecast instead.
Any help to fix this would be appreciated!
System: Apple TV Gen 4 + Denon AVR 2313 + Sony KDL 60w605 all the connected HDMI (and 3 other units that work very well).
Sounds like a defective remote control. With HDMI control off the coast, it seems possible, that the remote control is to turn off the IR signals directly to the receiver. Try to cover the distance before or the façade. In any case, I would return the unit. During the test leave in the main menu and just look at the level of the volume on the receiver. Do not play anything to avoid overload problems.
Post your receiver model number.
-
Portege M750 - Volume knob does not control the sound
Hello:
Just made a new intall of Windows 7 (32 bit). Made from scracth with CD from Toshiba. The drivers that I downloaded from the site Web of Toshiba. Everything is ok, except the volume knob does not control the sound.
Does anyone know driver I'm missing? All buttons and other functions are active except volume wheel.
Hello
Have you installed the VAP (value added package) for Win 7?
EU from Toshiba are page pilot VAP v 1.2.40
Maybe you are looking for
-
Recently, my firefox spent in the Croatian language. It is poorly translated, and he mixes English and Croatian for some sentences. I had enough to have in English. How do I do that?
-
HP 110: I love HP product just can't leave my HP just like that
My HP laptop hard drive crashed I bought another, then after three months I tried to install it but the password pop up after three attempts then fatal stole massage came up with a code CNU9388753 now am failed need yo help
-
Tecra M1 cannot connect wireless
Hello This new but I hope someone can help me. I'm having difficulties to connect to a wireless network with my Tecra M1. I think that the problem could be with the card Intel (R) prowireless MiniPCI LAN. I tried to reinstall the driver for it, but n
-
I tried several MORE times to burn a DVD, or even download a Windows Movie Maker Movie on my computer (or even on a CD) (all movies are in format .mpg). Either he hangs up to 67% or 33%. Still, I did like this program. Need help a.s.a.p. I need to g
-
Update hard drive of 320 GB to 1 TB
I'm running out of space in my HD (320 GB). I used the windows backup and restore for full backup of my drive and then did a full restore for the bigger drive. The problem was that the program kept them were leaving the same size as the original dr