Volume Vista Equium L40 - 17 M problem

Similar Questions

• Equium L40-156 initialize problem

  I have an Equium L40-156. When I press the power button the power led lights up, but there seems to be no hard disk activity. I manually turn off by pressing the power button for several seconds, leave it for a few seconds and then press the power again button once it starts normally.

  Any ideas please?

  Hi mate,
  Have you recently updated your BIOS, installed a few more RAM / another HARD drive or software? Perhaps some update driver?

  Since when the error pops up? And you have always guaranteed on this subject?
  So, if so, then bring your machine to an authorized partner and let check your machine. Would be the best...

  Greetings

• Re: Work no FN keys volume on Equium L40 - 17 M

  When I try to increase the volume with the FN key, the volume changes at all!
  The volume bar appears on the screen and even goes up and down, but the volume does not change. Please help if you have any ideas.

  Thank you.

  You hear the sound on the speakers? Do they work?
  The same happens when you connect a headset or head set?
  Maybe the internal speakers are disabled in some way.

  Check

• Equium L40 - Vista won't start after installation of product recovery

  Hello

  I had to realize a product uses recovery provided restore disk on an Equium L40 computer laptop (PLS41). The recovery procedure done his job to the end, reformats and copy all the files and then restarts. Now the problem starts...
  The pc gets in front of the BIOS boot screen, then it goes completely black with only a cursor to underscore flashing in the upper corner of the screen. No HARD or CD-rom drive activity.

  I did the cover about ten times now. All with the same result. I tried the repair procedure using a Vista boot CD and I also tried using another disk supplied with the computer, anytime upgrade from Vista. Here they are without defects, see the hard drive and shows that the vista files are on it, also sees the winRE partition.

  I tired even fresh install from the disc at any time. It also reformats the disk, copies and decompresses all files needed, begins to install the updates on the disk and then said: he needs to restart. It restarts and goes to black screen with flashing underscore cursor. What happens if I press the 'coup of any key to boot from CD' or leave it to boot from the HARD drive.

  I tried to fix this for two days now, including endless hours of forum to research, the computer belongs to my friend gets very angry I am. I need help. No one knows how to fix?

  Hello

  According to your message, I think that the HARD drive is faulty.
  I think there's a defective recording of MBR (MBR) of the drive and therefore the laptop refuses to boot.

  One question; have you tried to set the BIOS default settings? If this is not the case, try this.

  If it doesn t help and the laptop still does not start upward, then you should ask ASP for verification.
  I think it s a problem of HARD disk and, possibly, the HARD drive must be replaced!

  Greetings

• Equium L40-156: graphics card problem - error code 12 in Device Manager

  People of the night...

  Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).

  Tried the drivers that I had with the installer
  Tried the drivers from the toshiba download page
  Tried the drivers on the Microsoft Update site
  Tried the drivers from the website of intel

  All have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.

  Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
  Display settings do not display a connected device, DXDIAG had no idea either.

  Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere

  Any suggestions, greatly appriciated

  Ta

  Hello

  I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.

  ------------------------------------
  + Error code 12 +.

  + This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.

  + Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +
  -------------------------------------

  Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
  I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
  You can use the Toshiba Recovery CD/DVD of restoration!

  All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.

  Check this box and report if the same error is displayed on the laptop with the factory settings!

  Good bye

• Equium L40-156: Vista IE 7 WMP 11 - can't watch streaming videos

  I have an Equium L40-156, running Vista Home Premium, WMP 11, IE 7.
  I can't watch streaming video!

  I can on my computer which is running XP and IE7.
  I searched the forum after forum, and I'm still not close to solve this problem.

  Please please can someone help me...
  I'm pulling my hair out lol

  Thank you

  What to say that you need a plug-in. You may need to install an Adobe flash player?

  Check it!

• Downgrade from Vista on Equium L40-10 X

  Hi I just got an Equium L40-10 X and had to remove VISTA for the usual problems.
  Win XP prof SP2 is now on but all the probs im to get the rear box sound help please im not too good with driver problems :(

  Steve

  Hello

  do you know which sound chipset is on your computer? I'm not really sure, but I guess you should have a realtek chipset in your machine.

  I suggest the following:

  Go to www.realtek.com, download the latest drivers from there (because they work on both platforms - mobile and desktop), install and check if it work s. A few comments would be a good thing if its worked.

  See you soon

• Equium L40-10 X - Wlan just unresponsive on Vista

  Hello

  Did anyone having similar problems with Atheros AR5007EG on Equium L40-10 X wireless card?
  Laptop with pre-installed Vista, wireless card installed properly, stops just answer with tried several routers in different places (to eliminate interference) (Netgear, Belkin), wireless turns off intermittently and vista not not recognize the installed card (you will need to re - detect by using Device Manager).

  I used all the drivers that are available, most recent site web of toshiba and also more recent Atheros website, these do not resolve the problem and make question bad, goin to try update Bios on the web site of Toshiba, if it does not default which can return only mobile to as faulty dealer.

  Any ideas?

  Hello

  How I see it must be a hardware related issue. In this case to return your machine for a new or contact a [authorized Local Service partner | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] for a repair.

  Good luck buddy and good weekend

• Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

  Hi all

  I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

  If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

  Thank you! -Le Cannet

  Here is where I found the drivers (but with no mention of USB drivers):
  [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

  > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

  USB drivers are part of the Windows operating system.
  The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

  In addition, the chipset driver must be installed.

  I checked the proposed link in your ad and here, you can download the Intel chipset utility.
  The update of the BIOS is also available

• Equium L40: Replaced HDD - disc need vista Home premium

  I had to replace my hard drive in my Toshiba Equium L40 and need to install windows vista again I have my code of product vista Home premium but no installation disc.

  Can someone help

  Hello

  Sorry do you need exactly? Do you need disc recovery Toshiba or d you must have Microsoft Vista disk?

  The serial key you found at the bottom of the unit belongs to the preinstalled Windows operating system and will NOT work by using different Windows disks.

  You have two options;
  Either you buy the here Toshiba Recovery disk:
  https://backupmedia.Toshiba.EU/landing.aspx

  Or you buy the original disc of Microsoft Vista and will use the drivers provided by page European driver Toshiba

  There is no other solution.

• Problem starting Equium L40

  Hello

  I use F1 to start my Equium L40 every time I tun turn it on. It will then start ok but he forgot the time and date, as soon as I update time / date, the computer works perfectly I can access all my email etc accounts without having to put anything.

  The problem started after the replacement of the battery because of that being almost completely dead. I noticed that the computer will not work on AC only without mounted battey but is still charging the battery ok. (if the adapter is ok)

  I love the computer and do not really want to buy a new, but it is very frustrating and tedious when I turn it on.

  Maybe there is a battery backup I can change to fix the problem?

  Any help would be appreciated?

  Hello

  Laptop should also work without battery but connected to the power adapter
  So I guess that your motherboard is affected in some way.

  If the RTC battery (bios) is empty, the time and date in the BIOS menu would be reset to the default value. But in my opinion, this shouldn't be a problem to use the laptop with AC adapter.

  However, the RTC battery can be charged to do that you need to connect the main battery and power adapter and the laptop must be turned on for a longer period of time (18-20 hours).

  Check it out!

• Equium L40 - 17 M - restoration of the BIOS for Windows Vista to Windows XP Home edition

  I have an Equium L40 - 17 M on Vista... I tried Dban it and install WXP top...
  I try to Dban my TOSHIBA SATA hard drive that came standard with my laptop
  But Dban won't work for 5 seconds
  Then I just tried to install Windows XP Home edition on the D: drive and it loaded in all the file system then stops and says that it cannot find and hard drive for corn on...
  I also ran seagate daignosts tool to see if it was just my hard drive. But it passes all the tests.

  I rang a maintence mobile place... and they said that's not the hard drive... It's the BIOS.
  They said I need to get a cancellation of BIOS and drivers WXP chipset for my laptop.
  Then run the BIOS and then install Windows XP Home edition and they said it will ask for the chipset.

  Can anyone shed some light on this... I'm not sure

  Thank you

  Hello Joe

  On this forum, you will find hundreds of discussions on installation of Windows XP Home edition on the new models of laptops running Vista.
  Please look a little around with search option. If you still need assistance please let me know I'll try to help.

• Problem activating BTooth between cell phone & Equium L40

  Hi all

  Just bought a Toshiba Equium L40 series and can not detect my btooth active mobile phone in microsoft Sync Center, an I being dense and the laptop don't even no btooth capacity? Assumed he would. No problems with the detection of just etc. nearby wireless networks does not detect the phone, what am I doing wrong?

  Thanks for any help in advance

  Stand by. You are 100% sure about BT on your satellite? Maybe your laptop doesn't have BT. Please check the underside of your laptop. Each laptop with BT module has a label of BT.

  To be honest, I think that your Equium has no BT check it out!

• Equium L40 DVD Multi drive - do not burn files to DVD

  Hello

  Whenever I try to burn files to DVD discs using my dvd/rw drive, it holds in check the same point and comes with the invalid 'MS-DOS function' error. CDs write very well that it's just the DVD.

  Please could someone help with this problem?

  Equium L40 series
  Vista operating system
  My * a DVD-RAM UJ-850 s

  Hello

  What burning software did you use?

  I use Nero, and I've never had any problems!

• Equium L40 HDD sata drivers for Windows 7

  Equium L40 17 M (PLS49E) running XP... and I want to install Windows 7 and I need the disk drivers sata HARD turn...
  But I can not find these anywere... I tried the site driver Toshiba and other pilot sites.

  I had the same problem when I wanted to move from Vista to XP
  And found out that I just needed to add the driver for Sata HARD drive in the ISO I was
  I after trying Vista inside drivers

  Then someone knows that are Windows 7 disc sata (Storage Manager) HARD drivers
  or if I can use the Vista ones

  Thank you
  Joepeash

  Hello

  Normally, you can get all the drivers on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I checked the page, and it seems that for Windows 7 not all drivers available. So, as you've already written that you can try the Vista driver because most of them are also work on Windows 7.
  An alternative, you can consult the Intel page. Maybe you can find a newer driver that was official published for Windows 7.

  If you n t know how to use this driver exactly, use the forum search. You will find hundreds of threads. ;)