volumes for OrgUnit or group of members are created every 4 hours
Hello
By default, the volumes of the new OrgUnit or members of the group are created every 4 hours.
Is it possible to control / change this time?
The 4-hour polling period is not editable. However, please note that this is just for the pre-creation of the writable for users. If a new user is added between the voting periods that a write will be create on the fly for this user. So the first connection may take a little longer, they should always get writing as expected.
Tags: VMware
Similar Questions
-
Essbase do not move members but creates rather shared members
Suddenly, this problem appeared for the November statement. I've never met before.
Updated structures from flat files using rule Essbase files do not move members to their new parents but creates rather shared members.
Previously, Essbase moved members.
In the rules file, we have the 'Allow moves' disabled option because some shared members need to be created. If we choose this no shared members are created since Essbase moves key members at the locations of where the shared members are supposed to be.
Any help would be appreciated.That's why you need two sources of metadata:
(1) only members. Linking to a modified charge rule allowing movements.
(2) only members with their shared summaries. Use the same rule of ancient office which does not allow for movements and thus pushing them towards a shared hierarchy.I still wonder how it still worked. Something changed - what is it?
Kind regards
Cameron Lackpour
-
Windows 7 Pro 64 bit (and 32-bit) Setup on the domain.The domain users group is added to the local Administrators group.Printers are installed under the first domain user. These aren't the printers shared, but local usb printers or printers attached to the tcpip port and driver installed.All right.Users in the second domain is connected to the computer. They are part of the local Administrators group, because they are part of the domain users group.They're going to look at the properties of the printer and almost everything is grayed out.Why? Because they are part of the local Administrators group, they should not have full access?I look at security for printers and I don't see the first person in the list because it was created with their profile, but I also see local administrators that this new user belongs to a group. Now I can take everyone and increase the rights and then log in as a new person and they can then change the properties, but why can't new users "who are admins the" does not alter the properties?Thanks in advance for your help.
Hi Gsaunders,
If the computer is connected to the domain network then the question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
It will be useful.
-
10 Feb 08:00, Skype works not for 3 person group Skype chat, I'm in Costa Rica
10 Feb 08:00, 3 days can't get out my Skype groups to work for all users of 3, some are on mobile platforms (android and iPhone, some Windows, some on Mac
Seems to have auto corrected yesterday, so no worries.
-
Replacement for the Working Group to el Capitan Manager?
I recently built new servers, intending using open directory.
The equipment I use are the new mac mini servers, with two 1 TB drives and 16 GB of memory.
Historically I have used Workgroup Manager for direct starting, deployment of the printer files, user groups and others.
Is there a replacement for the Working Group Manager who no longer works with el capitan (10.11.3)?
The replacement is the Manager of service profile. See the built-in help of server for instructions begin. This is beta-quality software, at best.
-
Cannot open volume for direct access?
OK so I have windows vista 32-bit home... and I installed this program from avg that solves all the problems on the computer... Well now when I boot, I get a cannot open volume for direct access... and I loaded my computer finally and its telling me everything is corrupted?
Hello
I'm sorry but most of the posters, which I am part, who come here do not believe in using Tuneup Utilities, registry cleaners, etc. to improve performance or solve problems.
They are completely unnecessary.
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Or, if you don't have one, borrow a DVD of Microsoft Vista, not a recovery disk and you could do a upgrade in repair facility.
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And I have contacted AVG or their Forums as you say it was their program that caused the problems.
http://free.Avg.com/us-en/support
See you soon.
-
Just after I turn on the laptop (before Windows Vista turns on) the following message appears "cannot open volume for direct access. What this mean and how can it be solved?
Thank you
Eddie
Hi EddieLopezA,
· Which version of Windows Vista is installed on your computer?
· You have antivirus software on your computer?
This problem may occur if another utility or service, for example a virus check program or a program disk monitoring, locked the partition before you try to run the Chkdsk.exe or Autochk.exe utility.
I have some steps that may help you.
Method 1: I suggest you to turn off all third-party applications and check if you have a similar question.
To do this, follow these steps:
1. open the start search box, type services.msc and click OK.
2. in the Services (Local) list scroll the service concerned (for example auditor of virus or disk monitoring tool).
3. right click on the service and select Properties.
4. change the startup type to disabled for all applications 3rd - party that could be the cause of the blocking of Chkdsk problem.
5. click OK/apply.
6. restart the computer.
Method 2: If this does not help, try to change the registry value and restart the computer.
1. click on the start search box, type regedit.
2. in the Publisher of the registry under the HKEY_LOCAL_MACHINE subtree, go to the following subkey:
\SYSTEM\CurrentControlSet\Control\Session manager
3 change the Boot entry run of:
autocheck autochk * /r\DosDevice\C: (or other)
TO:
autocheck autochk *.
Note: Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. If you want to edit the registry to fix this I urge you to back up your registry before proceeding.
Links for:
Unable to run CHKDSK
http://support.Microsoft.com/kb/555484 (also applies to Vista)
Hope the helps of information.
-
How can I increase the volume for youtube videos?
Volume problems
How can I increase the volume of videos youtube - control panel shows me that my volueme is still 100% can hardly hear youtube videos.
Hover your mouse over the video, and then point the mouse pointer on the volume icon on the floating toolbar that appears, make slide the volume knob to the right to increase the volume.
Another thing to try if you still hear no sound, click on the volume icon in the Notification area of the Windows taskbar, click mix and watch if the mixer volume for Youtube is turned upward.
-
User profile folders that are created as UserName.MachineName for a new user
I created a new user local and rebooted my computer. I see that the user folder is created as UserName.MachineName. The same value is located in the ProfileImagePath under ProfileList for this user SID under HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList.
Steps I took to solve this problem which has failed:1 remove the user folder and restarted to log in again.2 remove the user and recreated and restarted.3. to change the ProfileImagePath for this user in the registry and rebooted.Things I want to know:1. why the user folders are created with this method of naming.2. How can I solve this problem?Receive any response on this thread.Thank you.Hi Vijay,
Follow these steps and check:
- Open area users and local groups of the Management Console as described above.
- Double-click the account, and go to the profile tab.
- Enter the folder path and home of profile (local path) as "C:\Users\USERNAME\".
- Copy the contents of the "C:\Users\USERNAME.COMPUTERNAME\" and delete "C:\Users\USERNAME\".
- Recreate the 'C:\Users\USERNAME\' folder, then paste is the content of the 'C:\Users\USERNAME.COMPUTERNAME\ '.
- Delete "C:\Users\USERNAME.COMPUTERNAME\".
- Restart and pray.
-
How o I increase the volume for headphones.
Original title: how to increase the wav in windows 7
I bought a headset and they were of low volume, but I tried on my dads windows xp there was the bar of wav and I increased it and it was fixed on xp but where can I find the wav bar in windows 7 windows 7 y at - it software to do?
Hello
This problem only occurs when using headphones?
You can follow the suggestions and check out them.
Method 1
a. right click on the notification area, the volume icon.
b. click Open Volume Mixer and increase the volume for the headphones.
Method 2
a. right click on the volume icon in the notification area.
b. go to playback devices and click with the right button on helmet under playback.
c. go to properties and set the volume to maximum on the levels tab.
d. click on apply and OK.
-
separate authentication and authorization for Active directory groups
Hi all
After a long search and failure, I write the question.
I use apex oracle 4.2 on windows server 2012 on oracle 12 c, all 64 bits.
We have configured Microsoft Active directory with LDAP.
in LDAP, we have a core group which is say A and an is down there students and the two groups.
According to the staff, there are many other groups and students, there are a lot of groups.
I created a mobile application, it has a main page that is publicly accessible without username and password.
in this home page, I have a list that contains two elements, personnel and another is a student.
When one of the list item, the login screen appears.
now I want to control when the user clicks on the staff list, only personnel should be authenticated.
If the end user is a student, it doesn't have to be authenticated.
the same goes for the student list item, if the end-user click on list of students, only students must be authenticated.
someone please guide me, I'm failed in research and testing.
Thank you.
Kind regards.
Hi Maahjoor,
Try this (it is written all the attributes for the user) by logging in to your schema to SQL Developer:
DECLARE -- Adjust as necessary. l_ldap_host VARCHAR2(256) := 'hct.org'; l_ldap_port VARCHAR2(256) := '389'; l_ldap_user VARCHAR2(256) := 'cn=hct\itnew'; l_ldap_passwd VARCHAR2(256) := 'itnew'; l_ldap_base VARCHAR2(256) := 'DC=hct,DC=org'; l_retval PLS_INTEGER; l_session DBMS_LDAP.session; l_attrs DBMS_LDAP.string_collection; l_message DBMS_LDAP.message; l_entry DBMS_LDAP.message; l_attr_name VARCHAR2(256); l_ber_element DBMS_LDAP.ber_element; l_vals DBMS_LDAP.string_collection; BEGIN -- Choose to raise exceptions. DBMS_LDAP.USE_EXCEPTION := TRUE; -- Connect to the LDAP server. l_session := DBMS_LDAP.init(hostname => l_ldap_host, portnum => l_ldap_port); l_retval := DBMS_LDAP.simple_bind_s(ld => l_session, dn => l_ldap_user||','||l_ldap_base, passwd => l_ldap_passwd); -- Get all attributes l_attrs(1) := '*'; -- retrieve all attributes l_retval := DBMS_LDAP.search_s(ld => l_session, base => l_ldap_base, scope => DBMS_LDAP.SCOPE_SUBTREE, filter => l_ldap_user, attrs => l_attrs, attronly => 0, res => l_message); IF DBMS_LDAP.count_entries(ld => l_session, msg => l_message) > 0 THEN -- Get all the entries returned by our search. l_entry := DBMS_LDAP.first_entry(ld => l_session, msg => l_message); << entry_loop >> WHILE l_entry IS NOT NULL LOOP -- Get all the attributes for this entry. DBMS_OUTPUT.PUT_LINE('---------------------------------------'); l_attr_name := DBMS_LDAP.first_attribute(ld => l_session, ldapentry => l_entry, ber_elem => l_ber_element); << attributes_loop >> WHILE l_attr_name IS NOT NULL LOOP -- Get all the values for this attribute. l_vals := DBMS_LDAP.get_values (ld => l_session, ldapentry => l_entry, attr => l_attr_name); << values_loop >> FOR i IN l_vals.FIRST .. l_vals.LAST LOOP DBMS_OUTPUT.PUT_LINE('ATTIBUTE_NAME: ' || l_attr_name || ' = ' || SUBSTR(l_vals(i),1,200)); END LOOP values_loop; l_attr_name := DBMS_LDAP.next_attribute(ld => l_session, ldapentry => l_entry, ber_elem => l_ber_element); END LOOP attibutes_loop; l_entry := DBMS_LDAP.next_entry(ld => l_session, msg => l_entry); END LOOP entry_loop; END IF; -- Disconnect from the LDAP server. l_retval := DBMS_LDAP.unbind_s(ld => l_session); DBMS_OUTPUT.PUT_LINE('L_RETVAL: ' || l_retval); END; /NOTE: The DN parameter on line 29 requires exact unique name for the user. In addition, on line 37 to filter, you can use username i.e. "cn = firstname.lastname."
You can specify a specific attribute must be extracted from the user in order by changing line 33 of the:
l_attrs(1) := '*';
TO
l_attrs(1) := 'title';
Then you can write a function based on above the code to extract the attribute LDAP user as follows:
create or replace function fnc_get_ldap_user_attr_val ( p_username in varchar2 , p_password in varchar2 , p_attrname in varchar2 ) return varchar2 as -- Adjust as necessary. l_ldap_host VARCHAR2(256) := 'hct.org'; l_ldap_port VARCHAR2(256) := '389'; l_ldap_user VARCHAR2(256) := 'cn='||p_username; l_ldap_passwd VARCHAR2(256) := p_password; l_ldap_base VARCHAR2(256) := 'DC=hct,DC=org'; l_retval PLS_INTEGER; l_session DBMS_LDAP.session; l_attrs DBMS_LDAP.string_collection; l_message DBMS_LDAP.message; l_entry DBMS_LDAP.message; l_attr_name VARCHAR2(256); l_attr_value VARCHAR2(256); l_ber_element DBMS_LDAP.ber_element; l_vals DBMS_LDAP.string_collection; BEGIN -- Choose to raise exceptions. DBMS_LDAP.USE_EXCEPTION := TRUE; -- Connect to the LDAP server. l_session := DBMS_LDAP.init(hostname => l_ldap_host, portnum => l_ldap_port); l_retval := DBMS_LDAP.simple_bind_s(ld => l_session, dn => l_ldap_user||','||l_ldap_base, passwd => l_ldap_passwd); -- Get specific attributes l_attrs(1) := p_attrname; l_retval := DBMS_LDAP.search_s(ld => l_session, base => l_ldap_base, scope => DBMS_LDAP.SCOPE_SUBTREE, filter => l_ldap_user, attrs => l_attrs, attronly => 0, res => l_message); IF DBMS_LDAP.count_entries(ld => l_session, msg => l_message) > 0 THEN -- Get all the entries returned by our search. l_entry := DBMS_LDAP.first_entry(ld => l_session, msg => l_message); << entry_loop >> WHILE l_entry IS NOT NULL LOOP -- Get all the attributes for this entry. DBMS_OUTPUT.PUT_LINE('---------------------------------------'); l_attr_name := DBMS_LDAP.first_attribute(ld => l_session, ldapentry => l_entry, ber_elem => l_ber_element); << attributes_loop >> WHILE l_attr_name IS NOT NULL LOOP -- Get all the values for this attribute. l_vals := DBMS_LDAP.get_values (ld => l_session, ldapentry => l_entry, attr => l_attr_name); << values_loop >> FOR i IN l_vals.FIRST .. l_vals.LAST LOOP DBMS_OUTPUT.PUT_LINE('ATTIBUTE_NAME: ' || l_attr_name || ' = ' || SUBSTR(l_vals(i),1,200)); l_attr_value := l_vals(i); END LOOP values_loop; l_attr_name := DBMS_LDAP.next_attribute(ld => l_session, ldapentry => l_entry, ber_elem => l_ber_element); END LOOP attibutes_loop; l_entry := DBMS_LDAP.next_entry(ld => l_session, msg => l_entry); END LOOP entry_loop; END IF; -- Disconnect from the LDAP server. l_retval := DBMS_LDAP.unbind_s(ld => l_session); DBMS_OUTPUT.PUT_LINE('L_RETVAL: ' || l_retval); DBMS_OUTPUT.PUT_LINE('Attribute value: ' || l_attr_value); return l_attr_value; END fnc_get_ldap_user_attr_val; /Then create an Application AI_USER_AD_TITLE tell you item request-> shared components.
Create following procedure to define the point of application on the connection of the user in your APEX application:
create or replace procedure ldap_post_auth as l_attr_value varchar2(512): begin l_attr_value := fnc_get_ldap_user_attr_val ( p_username => apex_util.get_session_state('P101_USERNAME') , p_password => apex_util.get_session_state('P101_PASSWORD') , p_attrname => 'title' ); apex_util.set_session_state('AI_USER_AD_TITLE', l_attr_value); end ldap_post_auth;Change the "name of procedure after authentication' in your 'ldap_post_auth' authentication scheme
Then modify the process in charge on your homepage to your application of PORTALS to:
begin if :AI_USER_AD_TITLE = 'Student' then apex_util.redirect_url(p_url=>'f?p=114:1'); else apex_util.redirect_url(p_url=>'f?p=113:1'); end if; end;I hope this helps!
Kind regards
Kiran
-
Fashion trend for a cluster group
Hi all
I want to do a trend display for the variation in the number of virtual machines in a cluster group. I created the group, the problem is that the number of VM metrics is not applicable to a group and I created a great metric for it, but it does not have historical data.
Do you have any idea how to show the parameters of a cluster for many clusters?
Thank you.
Looks like the great metric that you created is the best way to do it. Unfortunately, as you say it do not display historical data from before it was created. It is only being calculated from that time. I can think of a couple of alternatives, but I don't think those are exactly what you want. You can use a list view to display multiple clusters with the Min, Max and last values over a period of time, with a total of lines at the bottom to show/compare the totals for all clusters. If you are really looking for a chart, you can use the metric graph widget on a dashboard to show multiple clusters at the same time. There are buttons on the widget toolbar to divide or stack the cards so you can have all the clusters in the same chart, but it will not give you the total for all groups like the metric super.
-
I work in CP 9 and I'm going to try the following: the user must be able to make ALL invisible or visible to highlight boxes by clicking on the corresponding button on the first page layout. Thus, for example, if the user does not want the highlight boxes appear, click on "Hide the boxes" and boxes are hidden for the rest of the project. I managed to get to this point for help... but it is still a lot of work for me to manually enter all the different names of these boxes in the action-script. So my question is: is it possible to group objects, which are placed in the project and then hide them with line a single action-script? THX in advance, Philip
Actually... releasing the CpExtra HTML5 widget, it will be possible.
It has a function called @syntax that allows you to perform an action (for example HIDE) automatically on any object throughout a project of Cp9 simply based on the name of the object.
So for example, if you named all the boxes to highlight you want hidden this way to have the suffix _HideMe and you say CpExtra you want all of them hidden if a user variable is assigned to a certain value, then that is what will happen.
That's the good news. The bad news is that the widget is still in BETA final tests at the moment, so you may need to wait a bit before you can realize your idea.
-
How do you dynamically check if all child members are missing?
Hi all
How do you dynamically check if all child members are missing?
for example the threshold does not work because you cannot directly use member sets in an IF statement.
IF ((@CHILDREN ("Profit") == #MISSING))
If I list explicitly all the children in the IF statement, it will work, but there is a lot of hard code.
Thanks in advance.
Darren
I'm sure that (I have not tested) who...
@SUM (@CHILDREN ('profit'))
.. work - @SUM will commandeer a member set. And as the sum of a set will be #Missing if all the members of the set are also #Missing that is the desired result.
Quite frequently, the size of accounts will be dynamic at all higher levels, which means that you could just test 'Profit', but I guess that is not the case here.
-
Y at - it controls fade or volume for the audio volume?
Y at - it controls fade or volume for the audio volume? For example, if you want to use an audio clip and adjust the volume.
Cabbagepatchkid
First Elements 12 Mac
You should be able to click with the right button on your audio files and select fade, followed by fade in Audio or Fade Out Audio.
Please check out my blog on bland
As mentioned I'm strictly a Windows elements user, so I guess that the first elements of Windows and Mac
are the same on this feature.
Please let us know if you need any clarification on the above.
Thank you.
RTA
Maybe you are looking for
-
Yesterday, I used the debugger. Now everytime I try to inspect the code, I get the message "debugger is suspended." There is no breakpoint, I don't have a debugger break. How can he be stopped?(yes I googled and pressed every button..., I found no wa
-
IOS 9.3.1 matter of battery drain!
Hello I downloaded IOS 9.3.1 last night and today, I have a big problem with my battery level... anyone of you experience this problem? Thank you very much Giulio
-
Re: Tecra M10 stops down if it is locked and then login again (XP pro)!
Hello A few weeks ago, I got a * Toshiba Tecra M10 * my company which I use as mobile office.I have downgraded to Windows XP pro, which was delivered with the M10. The laptop works fine except one question:* If I lock Windows using the < CTRL > + < a
-
Where can I get a new nano receiver Arc Touch Mouse?
I have a Microsoft "Arc Touch Mouse" and lost the wireless USB nano-receiver. I can't buy this receiver separately. Can any one help? Where can I buy this USB receiver?
-
How to make another firewall that windows firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.