volunteer ping J

Similar Questions

• Ping on ios

  Hello everyone, I discovered that when I do a ping on my router (192.168.1.1) local, Ping is about 30 ms, which is very high, but when I'm with airplay, the same test give me a ping of 2 ms, which is normal. you have the same problem?

  ON the picture you can see ping before and after the air game is activated

  Thanks for your replies.

  I suspect the iPads wifi radio is in low power mode when no data is sent. This can have an overhead projector as the effects of the weather. iOS is not a 'performance raw BONES' is designed to save energy when it is possible to improve the user experience.

  When you run radio Airplay is sending and receiving data constantly, so the ping is faster that the radio is not disabled and re-enabled. The schedule isn't too out of the ordinary for me, you have a problem or you're simply curious?

  Try again when the download / streaming video or something that keeps the wifi connection active, it cannot be just Airplay making faster ping.

  You should also know that the router is another part of this conversation - it allocates resources to the stream to devices too, it may be faster when not having does not respond intermittently to a device. It also directs clean power for radio, etc.

• My email on my iPad (version 8.4.1) application froze on a white page. I tried to power down and restart. I know I get emails that I can hear the ping and see numbers on the app. It has been frozen for a day and I have no way to display

  My email on my iPad 2 (IOS 8.4.1) froze last night on a blank page I was trying to send a few photos. I know I get emails that I can hear the ping and my email application shows that I have two new. I tried to put this off, then restart, but nothing changes. When I type my email application it goes to the blank page and after a few seconds goes back to my home page. I'm leaving on a trip to Europe at the moment I'm in a bit of panic. Any help will be greatly appreciated.

  You tried to close the Mail application via the taskbar of the iPad: force an app to close on your iPhone, iPad or iPod touch - Apple Support ?

• Internet slow (ping) on Macbook (mid-2012)

  I a mid 2012 macbook pro (non-retine) and recently started having slower speeds of the internet. When you use the Ookla speed test, my ping is generally more than 200 (sometimes as high 700); my download speed is around 3 Mbps, when it is usually around 7. I thought it was the internet connection, but then I checked with an Ipad on the same connection, internet speed was 7mbps (ping was 40). When I try the speedtest on some sites powered by Ookla (like my Qwest or at the & t support site, it won't even run the speed test, saying that there is a latency error, or there is a firewall between my computer and the server).

  What I tried that did not work:

  Turn off the firewall in my security/privacy settings.

  Removing a silverlight program I had downloaded recently play video on a local Web site, so I don't know if that would be a factor.

  Remove the DivX program, based on what I've read in another similar post on the forum.

  * I did not run an uninstall on these programs, but just moved to the trash, then maybe it is needed?

  Change my DNS openDNS numbers numbers. I've since changed my original numbers.

  Any suggestions?

  Also, I tried to plug directly into my DSL cord and without wifi. The same problem.

• Slow Safari and Firefox ping

  Hi all

  I use Safari 9.1 than my normal browser and OS X on a MacBook Pro late 2013 10.11.4.

  I tested my internet speed (speedtest.net) on all devices and noticed that my 6s iPhone and iPad 2 air both iOS 9.3.1 (speedtest.net app) had a ping of less than a third of that of the MacBook Pro.

  Then I tried Google Chrome 49.0.2623.112 (64-bit) and the speed is as fast as with iOS devices. Then I went 45.0.2 Firefox and it was as slow as Safari again.

  For the last test, I disabled all extensions in Safari, but has not made a difference.

  Is there a setting to speed up Safari on OS X, his counterparts of iOS? I would rather not use Chrome on battery because I lose an hour of battery time.

  Thank you all for your help.

  Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History... The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Cache.db, and then move it to the trash.

  Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

  Corruption Safari       See post by Linc Davis

• Cannot ping localhost - error code 2 on Satellite Pro A200

  Dear COMPUTER gurus,

  I have a portable Satellite Pro A200.
  When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
  I tried to fix the winsock using articles from microsoft without success.

  Now I want to reapair the operating system using the recovery DVD.

  The recovery DVD has a repair option?
  If this isn't the case, anyone how to solve this problem?

  Help please!
  This is the result, I was using the pc diagnostic tool.

  Date 2008-08-30 01:47:12

  [Information on PC]
  Model name Satellite Pro A200
  Part number PSAF4U - 004 00D
  Serial number Y7312740Q
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.70
  Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
  Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
  Version Mobile Intel (r) 965 Express Chipset Family video = 6.14.10.4833
  Screen resolution 1280 x 768 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5440
  Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = 10.14.6.3 version = MAC address
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.1.0.100 references MAC address =
  TOSHIBA Software Modem Modem version = 2.1.77.0
  Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
  Interface IDE 2 no
  Interface IDE 3 no
  Interface IDE 4 no
  IDE Device 5 Hitachi HTS542512K9SA00
  Interface IDE 6 no
  Internet Explorer 7.0.5730.11

  Hello

  > I tried to fix the Winsock by using the Microsoft s articles with no luck
  I guess you're meaning to this MS article knowledge base:
  [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

  Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

  So searched the Web of the 3rd party site and someone has suggested to try these tips.
  It s also from Microsoft:
  * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

  So check it out maybe it helps

  If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(

  Concerning

• Can browse quote but cannot have their ping, apps can't access the internet

  Hello

  I'll do my best to give a full description. I'm sorry if I include irrelevant information, but I don't want to leave anything out.

  I tried to connect my Macbook Pro (with El Capitan installed) 2012 raspberry Pi 2 via ethernet and access it through a web browser. He has failed. It was my first time using an ethernet adapter to crush on my Macbook Pro. Since then, any application that accesses to the internet does not (for example, Appstore, steam, Spotify, Google Drive). Again, however, I can access websites through a web browser. Also, when I try to ping from a Web site via the terminal like Google, it says "ping: could not resolve google.com: Unknown host" even if I can access via a browser. I have tried to disable the firewall and have even reinstalled El Capitan. In addition, internet via the browser if possible access is slower then usual. I am at a complete loss and would appreciate greatly any help.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Ping an Apple Watch

  Hey I lost my watch! and it took me time to find. And I would like to know if I could ping my watch from my phone? As I can ping my phone of my watch.

  Woud be much appreciated if someone could get back to me.

  Hello

  No - it's not currently possible to ping from Apple Watch matched iPhone.

  If you want to suggest that Apple considers adding that as a new feature, you can do so here:

  https://www.Apple.com/feedback/watch.html

• Tecra S1 - 'ping' the key "N".

  Hello

  I have a Tecra S1 laptop. I accidentally 'ping' the key "N". I have now the key and three small plastic parts. None of them doesn't apperar to be broken, but I can't work out how to fix them all together and replace the key on the keyboard. Does anyone have a diagram key parts or advice.

  Thank you.

  Hello

  If you are sure that the parts are not broken, carefully remove the other some but just the top button. On this way, you can see how everything is put together. This top is very easy to get back on the right position. Simply press the carefully plastic part on the right position.

  Good bye

• Satellite Pro R50-B-114 - time to ping to router WLan problem

  Hello!

  I have a new laptop Satellite Pro R50-B-114.
  Unofrtunetely, when I connected it to my home network (router), I spotted there is problem with wireless adapter.

  Sometimes, everything works fine (ping ~ 1 ms to the router), but sometimes he changes completely (2000 to 3000 ms to the router).

  These problems are present, even if I have 2-3 meteres of router.
  I'm sure this is problem laptop ' other cos my work cell phones / devices very well with this router.

  OS: Windows 7 drivers: update.

  Someone at - it an idea of what's going on?

  Thanks in advance.

  Hmm... have you tried using different stadards WLan (802.11 A / C / G or N)

  As I am not mistaken the laptop was equipped with wireless network cards of new generation of Intel Wireless-AC 3160 that supports the 802.11 standard ac + agn.

  I recommend you check this setting.
  For the wireless network card, you must go to
  Manager of devices-> tab advanced Wlan card → properties →
  Here, you can change the Wlan standard as well as other settings.

  I would recommend you also check the Wlan stadrd in the Wlan router configuration and to ensure that the same standard is used by the network router Wlan wireless card.

  Also, the use of different WiFi (WPA/WPA2 AES, TKIP) encryption can improve performance.

• Ping high Satellite A300D wirelles

  Hello!

  I have a problem when I play an online game, my ping is 30 sec ok for 3 seconds until 300 and then more.

  Wireless adapter is Realtek 8187 B and I think that there is the problem. I update all driver, but he continues to do.

  Have someone idea how fixit?

  Hello!

  It's not easy to say what is wrong, but often this problem is caused by the internet provider.

  It could also be a problem with internet router or when several computers at the same time are in internet.

  If you have a firewall on your computer, disable it and try again. The antivirus could also be a problem or other applications that run in the background of your computer. Then close any programs you don't need, when you play online.

  Do an update of your router, if an update is available.

  I hope I could help a bit and give me a reason what happened after these tips.

  Good bye

• Satellite Pro M70-132: excellent WiFi connection but the pings are slow

  Hi all...
  My Satellite Pro M70-132 have problems with Wi - Fi connections (WiFi built in)... Generally, when the connection is excellent (indicator of windows), the pings are slow - very long time: 1212ms, 325ms, 645ms, 2112ms, 91ms, s 168ms... etc 'demand time limit has expired' (or sth like this).
  I have updated with the latest version of the Intel WiFi driver - it does not work...
  I installed new system - it does not work...

  Is it possible, that LAN WiFi is dead on my M70-132? How can I check before sending my 'Toshi' to the service?

  (BTW - built-in Bluetooth has been switched off...)

  I was tempted to access with several AP and also ad hoc. Every time, same results... connection strong-great but pings are slow... and often ping timeout...

  The IP address has been set manually and automatically - it does not work... too multidimensional :-(

  It's not metter WEP encryption is enabled, 'on' or 'off' and no authentication method does not change the situation with WLAN...

  Post edited by: maxgoldie

  Hello

  If the work of WLan connection and you are connected to the router so I guess everything's ok.
  Time to ping depends on not always the strength of the signal.

  If you ping other ip on the net if the time depends on the provider and type of connection.
  But if you ping your WLan router and it s very slow so it s a bit strange.

  If you think there could be something wrong with the Wlan card then you can try asking for help ASP.

• Ping of Satellite P500 127.0.0.1 sometimes times out

  I use a program that has my browser to contact him using the 127.0.0.1:60080 loopback address. I have been doing the lag issues and have spent weeks trying to diagnose the problem. I came across some strange results when I ping 127.0.0.1. He answered about 10 to 15% of the time, apparently at random. I searched many forums and can't seem to find someone with a similar problem. When I ping: 1 (IPv6) the answer is perfect. I also noticed that the time it takes is different because it can ping: 1 in<1ms but="" it="" takes="" 1ms="" to="" ping="" 127.0.0.1.="" any="" ideas="" what="" could="" be="" causing="" this?="" i'm="">

  I bought this computer in January and it is running windows 7 home.

  Here are a few popular Ping:

  C:\Windows\System32>ping 127.0.0.1

  Ping 127.0.0.1 with 32 bytes of data:
  Reply from 127.0.0.1: bytes = 32 time = 1ms TTL = 128
  Request timed out.
  Request timed out.
  Request timed out.

  Ping statistics for 127.0.0.1:
  Packets: Sent = 4, received = 1, Lost = 3 (75% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 1ms, Maximum = 1ms, average = 1ms

  n 50 ping 127.0.0.1
  [WAIT TIMES TOPPED MORE RANDOM AND ANSWERS]
  Request timed out.
  Request timed out.
  Request timed out.
  Reply from 127.0.0.1: bytes = 32 time = 1ms TTL = 128
  Reply from 127.0.0.1: bytes = 32 time = 1ms TTL = 128
  Request timed out.
  Reply from 127.0.0.1: bytes = 32 time = 1ms TTL = 128
  Request timed out.
  Request timed out.
  Request timed out.
  Reply from 127.0.0.1: bytes = 32 time = 1ms TTL = 128
  Request timed out.
  Request timed out.

  Ping statistics for 127.0.0.1:
  Packets: Sent = 50 received = 9, Lost = 41 (82% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 1ms, Maximum = 1ms, average = 1ms

  C:\Windows\System32>Ping: 1

  Rattling: 1 with 32 bytes of data:
  Answer of: 1: time<>
  Answer of: 1: time<>
  Answer of: 1: time<>
  Answer of: 1: time<>

  Ping statistics for: 1:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 0ms, Maximum = 0ms, average = 0ms

  Hey Buddy,

  I put t know what program you use, but in your case, I will try to update the driver LAN and WLAN. Two updates of the driver can be downloaded from the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Do you use the preinstalled version of Windows 7 in Toshiba or your own installation?

  I would also try contacting the manufacture of this software. Maybe they can answer you why this happens and if there is an update of the software for example.

• Tecra A10 with wrong source IP address ping responses

  Hello!

  I have problems with my network connection.

  After installing Win7 pro answers tecra A10 ping on the lan with 192.168.0.239 port, but he 192.168.211.36 the DHCP server.
  In Wireshark on tecra A10 I don't see demand for IGMP but no answer.

  On the other PC the answer comes a false IP (and of course a wrong MAC).
  If I disconnect the lan cable a stop responses.
  If I boot in Linux, everything's fine.

  So what software changes IP address?
  I see no answer in wireshark, I think it might be something around the network card.
  Internet is OK, but I can't do any remote.

  Someone at - it an idea?

  If your problem is the remote control only, right?

  If I understand right you don t use original Toshiba recovery image so no one here Don t know exactly what have you installed and you do exactly.
  If your LAN/WLAN card working properly and you can connect to your router, this proves that there is no hardware problem.

  Have you tried the same thing with the original preinstalled recovery image?

• Cannot ping local interface after last criticism of microsoft update

  I just bought a Satellite Pro A200.
  When I upgraded to the latest critical updates from Microsoft Update, I found that I could ping is no longer my local IP address. This has happened to the card NETWORK LAN RJ45 and the wireless network card.
  I reinstalled the operating system using the recovery CD, and I could ping to the IP address of the local interfaces.
  But when I again once downloaded and installed the latest critical updates from Microsoft, I can't ping the local IP address.
  Anyone has any idea why?
  Thank you

  Hey Buddy,

  WHERE´s the problem? I know that the updates are the system destroy it when they are buggy, but that's normal with microsoft. I have almost the same problems also! Thhoughts WGAnotify.exe, I was a software pirate and restricted my access to 'zero' access.
  "Yes, Sir, I bought a windows and it s stolen... well... OK... :(."
  Yes, noone except microsoft (who would be the point where I could say "you are in the wrong forum" ;)) knows why it s happening.)
  These days, you should do the following: find update is the cause of this error. You can do this by going in "Add / Remove Programs" in your "Control Panel" and click on the top of the window the button "see the updates.
  Then begin to uninstall the last installed update and check if your ping works. Otherwise, proceed to the next update and uninstall it and so on...
  I know it's a long and boring process, but since there is NO problem of toshiba, you must accept it and try my method to remove the update that is causing your error.

  Welcome them