Vostro 410 does not illuminate

Similar Questions

• Vostro 3500 does not illuminate

  Hi all

  When I press the power button on my Vostro 3500, button walk / stop and pause/play flash button, but it does not.  The power button and the play/pause button flashes every 5 seconds.

  I tried to delete / re-seats of the battery and the ram without success.

  Any suggestions?

  Thank you

  Scott

  Hello swholmes,

  I have a small question for you: did you tell you - assemble the laptop by chance?

  I had this same problem and I say-assembled for the cleaning of the exhaust fan (the laptop was overheating)

  The problem was that I had removed the CPU, and when I put back it, I forgot to turn the screw that holds the processor in the "locked" position When I did this thing, the problem was solved!

  I hope that helps you as it solved my problem!

• Vostro 430 does not illuminate

  Hello

  I've got questions for a few months, requiring several pushes the button to start.  I resolved to never put it off, thinking it was a dodgy button, for several months now.  However, yesterday we had a power cut and now I can't the PC to power everything.  Power is in the course of the PSU indicated by the green light at the back.  I followed some of the steps on this forum for troubleshooting... Disconnected and reconnected connectors etc.  I checked the button itself.  Sometimes when you press the power button I had a glimmer of life - blue light and whir cooling fans, but only briefly, then nothing again.

  Then I followed the steps of TS - disconnect the main supply to the connector on the motherboard and tried to jump over the Green wire to one of the black wires - I get power on the HDD and the DVD player that spin to the top, but nothing else... on each black wire the same result.  Any help or advice or next steps?

  Thank you.

  I guess the likely culprits here are:
  1 switch
  2 POWER SUPPLY
  3 - mobo

  Is most likely 1 and less 3.

  A couple of months, I tried to disassemble the "façade plastic" which contains the diag lights up and the power button on an other Vostro and abandoned after 30 to 60 minutes. I should have had like 9 hands and a bunch of tools made of plastic to get this thing apart.

  I guess you could buy the Panel part/small / whatever has the power button and plug to the motherboard and just leave the inside of the case (ha ha ha ha). Whenever you wanted to start the machine, you must open the box... or just leave the file open / side.

  The next suspect is the power supply. You have another machine with a similar diet that you can insert in the 430? You didn't say if your food is a totally custom power supply, Dell (in general, the size may be customized with Dell) or more like a generic power supply size. When I find the pictures with the words [psu vostro 430] the results look fairly typical. You have a machine that has a ' normal/typical' block of power SUPPLY Antec/Corsair/etc.? These are bets better than an IBM/HP/etc. POWER SUPPLY. I recently tried a beefy server IBM ATX PSU turn in "Dell PC #1" and got nothing. I put the same power supply in a really very similar 'Dell PC #2', and it worked perfectly. A replacement part from Dell to address right would most likely work for you. A ' normal/typical' PSU by Antec, Corsair, etc. would also be a good bet... assuming your Vostro 430 takes a PSU of size "normal/typical.

  Partly you could diagnose your existing power supply by buying a $10 POWER supply Tester, but you will only get so far. I recently bought one of those at Microcenter. It will tell you if the power supply is the production of the correct voltage, but not just any appreciable support being requested by the PSU. If you purchase the power supply Tester and the PSU has failed the test, you know you need a new power supply. But if it passes the test, you may still have a bad diet that initially provides the correct voltage, but fails when he tries to provide any support.

  There are full load PSU testers, but they are rather more expensive.

  I noticed in the thread on this forum called "Is it easy/possible to upgrade from feeding on the Vostro 430?" answering machine said "the Vostro 430 will use a standard ATX 12V power supply. Looks like it worked well here because only the initial poster was renovated to a comfortable level, size, aftermarket PSU.

  I'm not sure that this food is appropriate for you, but the size standard PSU Antec VP450 (aka VP-450) in the 'Brand' line Antec has excellent bang for the buck and is 80% effective. If you look on Amazon or Newegg buyers there are very satisfied. I bought one a couple of years back. Of course for more in $$$ you can absolutely get a PSU nicer (more powerful)... If you need that.

• Vostro 410 does not start

  I have a dell vostro. Worked fine for the last years, except now.

  Empty computer screen so my son off on your computer with the power button, now when you turn on the computer, the fan run continuously but not start or give error beeps.

  Button on the front is lit in blue.

  Checked the power supply, iy is ok and checked the memory, they are ok.

  any help would be

  242digital

  Try the following, if you are comfortable working around computers:

  Note: The only 100% POWER supply test method, is to install a known working power.

  Unplug the power cord, hold the power button in for about 15-20 seconds, open the case, disconnect the power connector 24-pin motherboard and jumping the Green wire to one of the black wires, plug in the power cord and the power of the system, if food and case fans and disk hard drive performance then the power supply should be good.

  Note: Do not remove the wires from the plug, use a small piece of wire or a paper clip as a rider.

  Excerpt from power supply, again, unplug the power cord, hold power in a few seconds to discharge residual power, reconnect the connector 24 pin to the motherboard.

  Remove all the computer PCI cards, remove the video card [as appropriate], disconnect all devices, except the monitor, mouse and keyboard and unplug cable power & data of all readers.

  Reconnect the power cord and power the system on, see if you get a different indication of the LED on the power button / stop, or 'beeps '.

  No difference, remove the system memory and try again.

  Still shows no signs of life while looking at a motherboard replacement & maybe a processor.

  Note: The processor rarely fails and the only method I know to check a processor, is to install a compatible working PC, or use a known job processing.

  Bev.

• 660 s does not illuminate

  I have an inspiron 660 s which does not illuminate.  The green power light is on in the back.  Nothing happens when I hit the power button.  No lights or the beeps.  The machine is about a year and a half old.  Tried to unplug and power drain.  Still nothing.  Help please.  Thank you.

  crowtoe

  Quote:

  "The green power light is on in the back.

  Not this indication, the power supply has no questions.

  As the power button does not lite and there no beeps, then I would suggest replacing the power by a "Known" work unit, as it is required to test the system and motherboard.

  It would seem that power Inspiron 660 s is an owner of Dell unit, because of its shape and size.

  You will need to call Dell spare parts to the 1-877-717-3355 and "Service Tag" of the system increased from hand.

  Otherwise, you could buy a compatible power 660 s from here:

  http://www.eBay.com/ITM/new-Chi-power-supply-PSU-for-Dell-Inspiron-660s-Vostro-270s-replace-upgrade-/331085294154

  http://www.Amazon.com/Dell-Inspiron-computer-HU220NS-00-HK320-82FP/DP/B00S8VAGH0/ref=pd_sim_sbs_147_1?ie=UTF8&refRID=1CCYEQ9016ZT02Q1G0Y3

  Bev.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

  iPhone 6 with iOS9.3.4.

  WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

  You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

  Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

• My MacBook Air does not illuminate

  MY MacBook Air does not illuminate?

  Nothing happens when you try?

  Power light?

  Tones? Startup chime?

  If you connect to the charger, which is LED color on the card?

• iMAC does not illuminate

  MY iMAC, which is several years old does not illuminate

  Take the test/diagnosis. Nobody here can 'pull' hardware problems.

  Barry

• 2009 iMac 21.5 does not illuminate

  My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

  Try to zap the PRAM or reset the SMC.

  Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

  Otherwise, take the model to your local store from Apple or a DAD.

  

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• Toshiba 40 L 345 * DB does not illuminate

  Hi guys,.

  I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.

  Any thoughts?

  Rgds

  Kedders

  Originally posted by Kedders
  

  Hi guys,.

  I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.

  Any thoughts?

  Rgds

  Kedders

  Hi Kedders,

  I just encountered the same problem. While watching the TV, it shuts down suddenly. Even model & 18 months and now dead. If I leave it plugged in now, we get the same thing - the power switch flashes between green and Red intermittently seconds or - but no picture at all.

  What's wrong?

  Kind regards

  Chris_UK

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Satellite L500-1DT does not illuminate

  My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?

  You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?

• Satellite M30X-127 does not illuminate

  Hello

  Need help!
  My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
  The guy there offered my 100 pounds for to buy me.
  Please a little help. What should I do?

  Hello

  Otherwise you will search in ebay for the second hand with the good motherboard unit.
  Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
  You can try to use second hand motherboard in your laptop.