Vostro 410 does not start

Similar Questions

• Vostro 410 does not illuminate

  I have a computer Dell Vostro 410. I accidentally hit the power button on the surge protector the other day and he died, which means he will start.

  This happened a few years back a couple times, but worked once I unplugged all USB keys and other sons and waited for about an hour. It went Tuesday and still nothing.

  When I plug the power cord in, the green light in the back turns, but that's all. I opened it upward and the dust is really gross, so I'll buy a can of compressed air and blow today, but I don't see how that could be the cause that it doesn't turn.

  I also found a few caps inside which are not connected to anything, but perhaps that they need not be?

  I tried to take the two RAM sticks and then putting back in which I will again because it took me 30 minutes just to get them back in.

  It is running XP.

  Please help... :(

  Thank you!

  fan1bsb97

  Bev, there is no error message or beeps that the computer doesn't turn on at all. There is no led power light - I think, it was blue - now, there is nothing. The only light is solid green light under the power cord and the yellow light inside the computer.

  fan1bsb97

  First try to connect the computer directly to an outlet without the surge protector, to see if that makes a difference.

  No difference, then replace the power supply a "known" PSU to work again to see if that makes a difference, as an it isn't required to test the motherboard etc. See page 32 of the maintenance manual.

  More generic standard ATX power supplies, with a 24-pin or 20 + power connector 4 - pin main motherboard, with or without the on/off switch, would be compatible with the Vostro 410.

  You should be able to buy a compatible power supply either a local computer or online store.

  Note: For the Vostro 410 mini-tower with six SATA power connectors power is required.

  Bev.

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vostro 200 desktop computer does not start

  Hi all, our company has an old desk, Vostro 200, which works very well for a few years.  A day after the cleaning, the machine does not start with the amber light.  Fans stop, even the power supply fan stops.

  I tried:

  1. using a different power supply, it's the same thing.

  2. using another CPU, it's the same thing.

  After I unplug power 4 pin for the processor, fans start working and it seems normal but show nothing.

  I also tried out the case from the jury and put it back, in order to avoid any shortened with the case.  It does not work.

  What is the failure of the motherboard? I had a copper shortcut or circuit on the map?

  Although it is an old computer, but we do not produce a bin with other parts in good condition.

  Thank you.

  One last thing is the license Windows XP OEM's sucks it as well as the motherboard has failed because the license is listed in the BIOS?  Thank you.

  CECTT

  Thanks Bev

  1. After spending the Green and black cables, the situation is the same: the fans stop with power of CPU 4 pin; fans of work without power CPU 4 pin.

  2. after disconnecting devices PCI/video /, the situation is the same, still no beep.

  3. after remove the memory, the situation is the same.

  After checking the CPU socket, I put that there could be some not vertical pegs.  Is it possible that I folded a few pins so that it didn't?

  Thank you

  CECTT

  Yes, it is possible, the processor installed correctly, for more information, go to pages 152 to 155 of the owner's manual, if the LGA 775 is damaged, this may require a motherboard replacement.

  https://www.Amazon.com/Dell-motherboard-Inspiron-systems-compatible/DP/B003CO0WQS

  The Vostro 200 was built with two different systemboards.

  Motherboards should have engraved on it model number.

  If she says G33M02, then it only supports Core 2 Duo processors.

  If it says G33M03 then it supports Core 2 Duo and Core 2 quad cores processors.

  What are the OEM sSpec numbers and processor that was installed as a replacement?

  http://www.Intel.com/content/www/us/en/support/processors/000005554.html

  Have you tried to reinstall the original OEM processor?

  In addition, the procedure is usually to Flash the BIOS to the latest version, before the upgrade of the Vostro 200 processor.

  Bev.

• Dell Vostro 200 beeps twice at startup, does not start

  I have a Dell Vostro 200 desktop computer that has started to beep twice when turning on/off, but it does not start and nothing appears on the monitor. Can someone tell me how to fix this, please?

  rsiboise

  Two * beeps * indicate a problem of memory, first try to open the case and remove and reinstall all memory modules and see if that makes a difference, troubleshooting procedures more can be found in the Vostro 200 Mini Tower Troubleshooter HERE. NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Bev.

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• MacBook Pro does not start

  I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  You said "It's like death does not start."

  Does this mean that he shows no signs of life? Indicator light power?

  Hear the carillon?

  Hear the fans?

• The FireFox 42.0.1 application does not start.

  The FireFox 42.0.1 application does not start. I can uninstall and reload FireFox 37.0.2 and that worked, but now when I load 37.0.1 it installs really 42.0.1 that no longer works.
  I had to use IE 10 to contact Mozilla.
  Year annual should be ashamed of this...
  Can you tell me why Mozilla FireFox 42.0.1 installs but won't work?
  In addition, why FireFox 42.0.1 install when I try to install 37.0.2?

  It is possible that your firewall or other security software blocks or limit Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Firefox does not start, the Profile Manager is not available

  Firefox worked, then update it does not start. I tried all the fixes; However, the Profile Manager is not accessible or even present in the execution file. I unintalled and reinstalled several times, but I still can't get it to work. There is no Windows or Norton firewall block so I do not understand. What can I do? I want to use Firefox because it's the best browser; but now I'm forced to use Oscar. It's not terrible, but I prefer the features I've had with Firefox

  I had upgraded to the latest version; but the thought of demotion to the version which worked perfectly. In the end, I had to defrag, do a registry clean and optimization of performance of PC, but for the upgrade launched. So, I'm happy to say that I reply to this post with my Firefox browser. Thank you very much for your help. If all goes well, I won't have problems.
  DoubleD52

• My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

  Hi Apple/community,

  I need a help.

  What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

  

  Any help will be greatly appreciated. Thank you!

  Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

  Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

  If it works, try to repair the disk with this command:

  fsck -fy

  (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

• Firefox does not start - claims that it is already open

  Firefox does not start. He claims to be already running, but that doesn't seem to be the case.

  I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »

  There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."

  Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."

  I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.

  I also turned off my computer and uninstalled and reinstalled Firefox several times.

  I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.

  My PC runs Windows 10, incidentally.

  Try to delete the parent.lock file in the Firefox profile folder.

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See:

  • http://KB.mozillazine.org/Profile_in_use
  • https://support.Mozilla.org/KB/Firefox+is+already+running+but+is+not+responding

  What security software do you have?

  Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).

  If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".

  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/
  • http://www.7tutorials.com/4-ways-boot-safe-mode-Windows-10