VPN access query remote ASA - several group policies for the unique connection profile

Similar Questions

• I can't access my cloud applications creative adobe correctly for the plan of photography. I used to have the full plan and move in terms of photography, and now I can't access my apps under the creative cloud. He said to uninstall and reinstall I tried t

  I can't access my cloud applications creative adobe correctly for the plan of photography. I used to have the full plan and move in terms of photography, and now I can't access my apps under the creative cloud. He said to uninstall and reinstall I have tried to do without success and still get the same error.

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• Wacky VPN access problem of ASA

  Hi people,

  I am currenty a situation, and I am in real need of advice...

  The situation is that, if ASA helps my remote branches to access my home network and its allowing people to visit Internet inside, its not allowing the remote VPN client VPN access... R V to aid VPN client version of Cisco 4.6...

  See a presentation of basic network that illustrates our network and configuration of the ASA...

  Advice to solve this problem will be greatly appreciated...

  Kind regards

  Noman Bari

  I see what rou are... Please see my attchement...

  Please rate if it helps!

• the group policies for anyconnect

  Does anyone know how to create an ACL for a group policy from the seller, I have created the need to only allow certain Ip hosts and reject anything else. This is for the anyconnect vpn. Any help would be appreciated.

  I guess that's what you're looking for

  allow the you need to allow and deny the rest in the ACL

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080975e83.shtml

• ACS Auth: Use of group data for the authentication of the user-> security problem?

  IM only using a VPN-installation (router, ACS, Cisco VPN Client) and I noticed that the name of the Group and the Group decrypted password can also be used in the second step of the authentication (the extent of authentication or authentication of users), which is a big security concern. What wrong with my setup.

  For the test I have set up a VPN configuration as described in cisco documents. Here, it also works. The identification information of the Working Group in the authentication of the user, too, which is quite logical, because the group credentials are also a user in the database of GBA. Of course, this user can be authenticated in the user authentication process.

  Who is wrong? How other admins to solve this problem? Am I wrong in my approach?

  Thank you!

  Yes, permission will have password for "cisco", at least for isakmp and pki. The group will send its name and password Cisco to receive the av pairs (ASA has a function to create a "good word of different past" but he's not here on IOS, AFAIR)

  It is a restriction known - you should not use the same server for authentication and authorization, with IOS and ASA.

  Did you give this property (either / or):

  -local isakmp authorization

  -l' authentication certificate (Group)

  -sharing features for authentication and authorization between servers.

  I don't think we can do much wise configuration to prohibit this behavior.

  Edit: spelling correction.

• IPSec VPN connectivity between multiple subnet for the unique subnet

  Hello

  I have headquarters where several VLANs are running and branch has a subnet.following is subnet details

  Head office subnets

  192.168.0.0

  192.168.101.0

  192.168.50.0

  192.168.10.0

  192.168.20.0

  192.168.30.0 all are 24

  branch

  192.168.1.0/24

  Headquarters I have PIX and branch, I have cisco router 2600. I want my subnet all headquarters access to my office of general management of the LAN

  I want to create an ipsec vpn, my question is that I can combine several subnets of headquarters in a subnet because I want ot get rid of several ACL entries

  Hello

  Well, if we look at the site of the Directorate. He has only the single network and even with the destination network that overlap, it shouldn't be a problem. If a host on the network of agencies needs to connect to another host to local subnets will connect directly to him and the traffic flow through the router.

  I don't know if there should be no problem on the PIX side or the other.

  But to be honest, it's a very small amount of networks, and I don't see a particular reason, that I would not configure each network specifically, even if it should procude a few lines more to the ACL. Personally, I prefer to be as specific as possible in configurations to avoid any problems.

  -Jouni

• How to change group policy for the system restore will create restore point

  I recently installed an SSD with windows 7, it's the default OS and hard drive on a system dual boot. I also have my old HHD with windows vista home premium. I had problems using the restore of the system with the SSD drive and read on a forum that the restoration of the system causes problems when it is used on an SSD. I have disable restoring the system to the SSD, but still he had checked to allow restoration on the vista disk and a 500 GB drive, I have use for storage.

  I managed to create a restore point when you are using windows 7 OS, but when I used my vista drive, and wanted to create additional restore points for two HHD disks, it does not allow the creation of restore points by group policy settings. I regularly create restore for the SSD disk and have created one for the HHD Vista since the system restore does not create additional restore points now.

  How can I change my group policy settings to enable restore points to create the disk under Vista. I don't remember changing anything that might have caused it, is there a chance that a horse of Trojan or virus caused this? I have Webroot antivirus and currently aired Kaspersky Anti-virus on Vista drive. I also ran the Microsoft safety scanner in safe mode and normal startup mode, none of the virus scanners have found problems, so I'm pretty sure I don't have a Trojan or a virus.

  To the point, how to make appropriate changes to allow the restoration of the system to work for my two HHD disks.  Better yet is there a way to restore completely all original windows default system settings without having to do a clean reinstall.

  You can provide any help would be greatly appreciated

  Thank you

  Skyraider 33

  Hello

  You receive an error message when creating a new system for Windows vista restore point?

  Using the Group Policy Editor

  If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in,

  Follow these steps:

  1. Click Start, type gpedit.msc and press ENTER
  2. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  3. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  4. exit the Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Using the registry editor

  1. Click Start, type regedit.exe and press ENTER
  2. navigate to the following key:
  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  3. in the right pane, delete the value named DisableConfig
  4. exit the registry editor.

• Several mappings class for the AIP

  Hello people,

  A similar question was asked on the forum here, but I wanted to just make sure that there is no exception or this specific configuration. Basically, we have the AIP modules in our ASAs and we want to move traffic to their investigation. We already have class-control charts (the ASA standard control not IPS). And if I understand that traffic will be matched only by a single class-map and handled accordingly.

  Here is the config for a better understanding

  Current config

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  Policy-map global_policy

  class inspection_default

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  Additional configuration

  USERS-IPS-ACL scopes allowed host x.x.x.x ip access list all

  USERS-IPS-ACL scope permitted ip access list any host x.x.x.x

  !

  !

  USERS-IPS-CLASS of the class-map

  corresponds to the access USERS-IPS-ACL list

  !

  !

  IPS-POLICY policy-map

  USERS-IPS-class

  fail-closed inline SENSOR USERS IPS sensor

  Thus, for example, say that a user sets the FTP connection to a server. Based on control policy overall (nothing to do with IPS), traffic will be inspected and not forwarded to the AIP module. Can we confirm this or shed some light on this topic please?

  Thank you very much

  Martin

  Hi Martin,

  As actions are different on the cards of two classes, it will be sent to IPS.

  If action on the map of second class had been the "inspect ftp", then only the first "ftp inspect" would have no effect. But here, the actions are different. We inspect and other is sending traffic to the AIP module.

  HTH

  SPSP

• apply the group policy for the screen saver without copying the screen saver on all computers

  Hello
  I have applied the group policy for server screen saver 2008 but do run
  I copied the file on each computer .scr.
  is there a way to push file of screen directly from the server without copying it to each computer on the network?
  or is there a software that can automatically run the screensaver on the network?

  Hello

  The business support, you can find forums on TechNet, see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• Several style sheets for the background and the adjustable content 1 and 1 for the layout

  The H guys, I have 1 css which is attacthed to everypage of the site, it's the basic layout of the site, what I want and try to do, is a different css for "each" page that has a background of different bodies and the unique divs for the page in question!

  I have attached two css page only shows the css layout, so there is no bg or unique divs showing, what should I do to get both to display on the page?... I tried to connect the togther 2 css, but only this provision, so I'm pretty stuck.  Many thanks in advance if you can help

  It is better to post the link to your page (s) online.

  I remove the background page of your remote main stylesheet rules and use

  a block of style incorporated into the head section of each page for specific page styles.

• SQL query to assign several concurrent programs to the concurrent Manager.

  Hello

  You have any script to assign a list of program contributing to separate concurrent managers. Currently, there are more than 100 programs need to be assigned to the manager.ut

  We do front end, but it will take quite a long time to complete this task.

  Could you please help me on this.

  Thank you and best regards,

  Simone.

  Hi Simone,.

  First of all I need a sql query to find out what custom programs are assigned to which Manager.

  Please see:

  How can I tell which concurrent Manager handled a simultaneous [ID 344011.1] application/program

  Find all programs assigned to the specialization Manager rules? [271283.1 ID]

  Second, I have to give these programs customized to different custom managers.

  See if this helps:

  https://forums.Oracle.com/thread/2343489

  Thank you &

  Best regards

• Query to find the group name for the Business of the employee

  Hello
  
  I'm new to the HRMS module.
  
  I want to find employee (per_all_people_f) information about commercial groups.
  
  I found a HR_ALL_ORGANIZATION_UNITS database table, but there are many records in this table with the same business_group_id that in itself is not a unique key.
  
  Could someone help me find the link between employees and their BG.
  
  Thank you.

  Hello

  The link is between per_all_people_f.business_group_id and hr_all_organization_units.organization_id (i.e., the pharmacokinetics of the table). It will be useful.

  Kind regards.

• option to Editor local group policy for the administrator account on Windows 7

  I have an administrator account I want to restrict in some respects. I know that this can be done via local group policy. So, I need:

  1. Installation of new programs require an admin password.

  2. Some programs (that I choose) run without admin password.

  3. Held together under one account, without comments, accounts of users or lower privileges.

  No idea how to do it?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you had to restrict access to some programs using the local Group Policy Editor. The Local Group Policy Editor is a snap Microsoft Management Console (MMC) that provides a single user interface through which all the settings of local Group Policy objects can be managed.

  I suggest you to return the article mentioned below and see if it helps you to solve the problem.

  Local Group Policy Editor

  Group management strategies for it professionals

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Several VCS - C for the deployment of Jabber

  Hello

  I found no documentation if the following scenario is possible:

  -MSD 1 with TMSPE

  -1 VCS Expressway

  -Control of multiple VCS (different places connected by VPN)

  Right away:

  -Video jabber is configured on TMS with different areas

  -Jabber client credentials come from AD (all areas)

  -Jabber clients are on VCS Control 1

  Scenario:

  -Several VCS control servers

  -Jaber clients will register to the VCS control of their zone / area (based on the rules related to the domain.) Ex: [email protected] / * / will record on VCS - C1,[email protected] / * / will record on VCS - C2, etc.)

  -1 easy to use TMS

  Thank you!

  Hi Valentin,.

  Yes, it is possible. Configure the various commissioning (SIP server address different VCS - C you want to register to the value), templates for different groups that you want to register on different VCS and affect the good model for groups.

  Also, be sure to activate the commissioning (from MSDS) on all VCS which should be able to sign up customers in service.

  Let me know if you have any questions,

  Arne

• Prevented by a group policy for the new usb keyboard driver installation

  Try to install the new keyboard (USB) but get the "group policy has prevented these drivers to install" or which nearby. No matter how lucky it is a value for default "Group Policy Editor"or a repair/reinstall of windows will do? ".

  Lee

  Which edition of Windows 7 are you running?

  If its Windows 7 Professional, Enterprise Edition or Ultimate, try the following:

  Press Windows key + R on your keyboard.

  type: gpedit.msc

  Press enter on your keyboard

  ---------------

  Under Computer Configuration, expand Administrative Templates

  Expand Windows components

  Select Windows Installer

  In the right pane, select "Disable Windows Installer"

  Double click on it

  Make not configured is selected, and then click on apply and OK

  Exit group policy

  Restart your computer