IPSec VPN connectivity between multiple subnet for the unique subnet
Hello
I have headquarters where several VLANs are running and branch has a subnet.following is subnet details
Head office subnets
192.168.0.0
192.168.101.0
192.168.50.0
192.168.10.0
192.168.20.0
192.168.30.0 all are 24
branch
192.168.1.0/24
Headquarters I have PIX and branch, I have cisco router 2600. I want my subnet all headquarters access to my office of general management of the LAN
I want to create an ipsec vpn, my question is that I can combine several subnets of headquarters in a subnet because I want ot get rid of several ACL entries
Hello
Well, if we look at the site of the Directorate. He has only the single network and even with the destination network that overlap, it shouldn't be a problem. If a host on the network of agencies needs to connect to another host to local subnets will connect directly to him and the traffic flow through the router.
I don't know if there should be no problem on the PIX side or the other.
But to be honest, it's a very small amount of networks, and I don't see a particular reason, that I would not configure each network specifically, even if it should procude a few lines more to the ACL. Personally, I prefer to be as specific as possible in configurations to avoid any problems.
-Jouni
Tags: Cisco Security
Similar Questions
-
Ipad Cisco ipsec VPN connects but not access to the local network
Hi guys,.
I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.
If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.
Cisco 877.
My config is attached.
Any ideas?
Thank you
Build-in iPad-client is not useful to your configuration.
You have three options:
(1) remove the ACL of your vpn group. Without split tunneling client will work.
2) migrate legacy config crypto-map style. Here, you can use split tunneling
3) migrate AnyConnect.
The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.
-
ASA 5505 IPSEC VPN connected but cannot access the local network
ASA: 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
Pool VPN: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.
I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.
Here is my setup, wrong set up anything?
ASA Version 8.2 (5)
!
hostname asatest
domain XXX.com
activate 8Fw1QFqthX2n4uD3 encrypted password
g9NiG6oUPjkYrHNt encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.1.253 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
address IP XXX.XXX.XXX.XXX 255.255.255.240
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain vff.com
vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
logging trap warnings
asdm of logging of information
logging - the id of the device hostname
host of logging inside the 10.1.1.230
Within 1500 MTU
Outside 1500 MTU
IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt AD
AAA-server host 10.1.1.108 AD (inside)
NT-auth-domain controller 10.1.1.108
Enable http server
http 10.1.0.0 255.255.252.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.1.0.0 255.255.252.0 inside
SSH timeout 20
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntest strategy
Group vpntest policy attributes
value of 10.1.1.108 WINS server
Server DNS 10.1.1.108 value
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the password-storage
disable the IP-comp
Re-xauth disable
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntest_splitTunnelAcl
value by default-domain XXX.com
disable the split-tunnel-all dns
Dungeon-client-config backup servers
the address value vpnpool pools
admin WeiepwREwT66BhE9 encrypted privilege 15 password username
username user5 encrypted password privilege 5 yIWniWfceAUz1sUb
the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username
tunnel-group vpntest type remote access
tunnel-group vpntest General attributes
address vpnpool pool
authentication-server-group AD
authentication-server-group (inside) AD
Group Policy - by default-vpntest
band-Kingdom
vpntest group tunnel ipsec-attributes
pre-shared-key BEKey123456
NOCHECK Peer-id-validate
!
!
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: end
Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.
The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.
On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.
-
3070 connectivity problem - multiple Accespoints with the same SSID
Hi all
I have a problem with my printer HP Deskjet 3070 printer all-in-one.
I have 2 accespoints with the same SSID for better coverage of the pit of the wireless home network.
For some reason any my HP printer keeps losing wireless connection when the 2 accespoints are rising.
I use a different frequency for the 2 accespoints channel and it works fine with all other wireless devices.
I did that a DHCP are used, r, but in fact it doesn't matter because the printer uses a static IP (192.168.0.3)
When the two AP is the printer loses wirelesss connectivity. (The blue led will blink)
If I take one of the accespoints offline, the printer becomes available.
Is this a problem on my end or a problem of software/firmware printer?
Kind regards
-eth0
Lol this is not very clear to me?
But it is very good that we continue here:
-
How to switch between multiple windows in the same application?
Hello
I use OS X Capitan version 10.11.13 and I'm trying to find an easy way to switch between multiple windows in the same application by using CTRL + alt or different keys.
Here is what I feel...
Let's say I have Outlook, Google Chrome, Safari, iTunes and apps 'about this Mac' open.
I open the new message window in Outlook and another Chrome window. I have therefore 2 separate windows in Outlook and Chrome.
With that, I'm unable to move the composition and the window main outlook which is so annoying. Let's say I want to read the emails by the prospect main window and transfer of the content of the compose window! The command + tab doesn't take me to the main window of Microsoft outlook! Even if there were the last visited / applications window. This constraint is not intuitive, unless it can be configured in the settings?
Strangely, I can't switch to the "about this Mac" window.
The work around is to use the function (F3) mission button and click on the window, that I want to use or click the "Outlook" application on the dock icon and choose the window in the list.
Does anyone know how switch between different windows in the same application by using a key combination or one another method other than listed above?
Thank you
Avinash
In general, an Application that can open multiple windows provides a "Windows menu" you can choose the window you want.
-
My connection between my PC and the Internet.
MY CONNECTION BETWEEN MY PC AND THE INTERNET.I sent a message yesterday - don't know if I got a response.
My question is that something is wrong with my internet connection. He died in line every 4-10 minutes of use. I bought a new computer because my technician told me that I had a bad virus on my PC. But now I have a new PC but my problem remains.
Can what tests I do to see if the problem is with my wireless router, the Arris modem provided by Comcast, or something else.
Please help me.
Dave Fox
my main email is
, but I think I have the address of e-mail as . so when you meet me you you the man or the other. But please reply to this email.
You have the same problem if you connect directly to your router?
-
BlackBerry Smartphones why do I get multiple contacts for the same person
Recently, when I add a new contact the 9700 creates several entries. When I delete these multiple inputs, then it leaves about 10 spaces. If I let multiple entries for the same person, the next person that I add only then indicates once
Why they appear more than once?
How can I delete multiple entries so they do not reappear when I create the following entry?
Help, please
Try a simple reboot and see if the empty entries remain.
With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.
-
Sorry, we couldn t connect to Microsoft services for the moment
I can't move to microsoft account in windows 8
error
Sorry, we couldn t connect to Microsoft services for the moment, if the start screen of this persists.search problem for 'referee' on then!
but my network without problem!Hi rezarajabi,
We get the error message when we have server problems. So I suggest to wait for minimum 24 hours, then try again.
You can also try running Microsoft troubleshooting account and check. Here is the link for your reference.
http://go.Microsoft.com/fwlink/?LinkId=268424
If nothing works, then you can create a new account to Microsoft and check.
Create a user account
http://Windows.Microsoft.com/en-us/Windows-8/create-user-account
Let us know if you have any additional questions.
-
When I connected to adobe photoshop for the first time with my adobe ID and password on my lap top, it couldn't connect and gave me "error 400". What does that mean?
Hello
Please visit Adobe Creative Cloud connection errors
Hope that helps!
Kind regards
Sheena
-
AcriveSync has created multiple numbers for the same contact
I recently had my transferred to my new pre phone book and set up my corp email.
A lot of my contacts are mixed up (last names starting with O come in T, and these records have multiple records for the same phone number. How can I fix?
Hey thanks - I thought about it. Turns out there have a lof of contacts in my constituency of corp I do not even know (or use). I went in a deleted them and now al is good. Thank you!
-
NPL of multiple execution for the awr sql_id
Hi Experts,
NPL of multiple execution for the AWR sql_id,
I followed questions
1. What plan using opimizer tcurrently?
2. make sure optimizer to choose good plans
SQL > select * from table (dbms_xplan.display_awr ('fb0p0xv370vmb'));
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SQL_ID fb0p0xv370vmb
--------------------
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hash value of plan: 417907468
---------------------------------------------------------------------------------------------------------------
| ID | Operation | Name | Lines | Bytes | TempSpc | Cost (% CPU). Time |
---------------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | 63353 (100) |
| 1. UPDATE |
| 2. SORT ORDER BY | 17133. 2978K | 3136K | 63353 (1) | 00:14:47 |
| 3. HASH JOIN RIGHT SEMI | 17133. 2978K | 62933 (1) | 00:14:42 |
| 4. COLLECTION ITERATOR PICKLER FETCH | |
| 5. HASH JOIN RIGHT SEMI | 68530 | 11 M | 62897 (1) | 00:14:41 |
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
| 6. VIEW | VW_NSO_1 | 5000 | 35000 | 33087 (1) | 00:07:44 |
| 7. COUNTY STOPKEY |
| 8. VIEW | 127K | 868K | 33087 (1) | 00:07:44 |
| 9. GROUP SORT BY STOPKEY | 127K | 2233K | 46 M | 33087 (1) | 00:07:44 |
| 10. TABLE ACCESS FULL | ASYNCH_REQUEST | 1741K | 29 M | 29795 (1) | 00:06:58 |
| 11. TABLE ACCESS FULL | ASYNCH_REQUEST | 1741K | 280 M | 29801 (1) | 00:06:58 |
---------------------------------------------------------------------------------------------------------------
SQL_ID fb0p0xv370vmb
--------------------
SELECT ASYNCH_REQUEST_ID, REQUEST_STATUS, REQUEST_TYPE, REQUEST_DATA, PRIORITY, SUBMIT_BY, SUBMIT_DATE.
Hash value of plan: 2912273206
--------------------------------------------------------------------------------------------------------------------------
| ID | Operation | Name | Lines | Bytes | TempSpc | Cost (% CPU). Time |
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | 45078 (100) |
| 1. UPDATE |
| 2. SORT ORDER BY | 1323. 257K | 45078 (1) | 00:10:32 |
| 3. TABLE ACCESS BY INDEX ROWID | ASYNCH_REQUEST | 1. 190. 3 (0) | 00:00:01 |
| 4. NESTED LOOPS | 1323. 257K | 45077 (1) | 00:10:32 |
| 5. THE CARTESIAN MERGE JOIN. 5000 | 45000 | 30069 (1) | 00:07:01 |
| 6. UNIQUE FATE |
| 7. COLLECTION ITERATOR PICKLER FETCH | |
| 8. KIND OF BUFFER. 5000 | 35000 | 30034 (1) | 00:07:01 |
| 9. VIEW | VW_NSO_1 | 5000 | 35000 | 30033 (1) | 00:07:01 |
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
| 10. UNIQUE FATE | 5000 | 35000 |
| 11. COUNTY STOPKEY |
| 12. VIEW | 81330 | 555K | 30033 (1) | 00:07:01 |
| 13. GROUP SORT BY STOPKEY | 81330 | 1 429 K | 2384K | 30033 (1) | 00:07:01 |
| 14. TABLE ACCESS FULL | ASYNCH_REQUEST | 86092 | 1513K | 29731 (1) | 00:06:57 |
| 15. INDEX RANGE SCAN | ASYNCH_REQUEST_SUB_IDX | 1 | | | 1 (0) | 00:00:01 |
--------------------------------------------------------------------------------------------------------------------------
Hash value of plan: 3618200564
--------------------------------------------------------------------------------------------------------------------------------
| ID | Operation | Name | Lines | Bytes | TempSpc | Cost (% CPU). Time |
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | 59630 (100) |
| 1. UPDATE |
| 2. SORT ORDER BY | 4474 | 777K | 59630 (1) | 00:13:55 |
| 3. HASH JOIN RIGHT SEMI | 4474 | 777K | 59629 (1) | 00:13:55 |
| 4. VIEW | VW_NSO_1 | 5000 | 35000 | 30450 (1) | 00:07:07 |
| 5. COUNTY STOPKEY |
| 6. VIEW | 79526 | 543K | 30450 (1) | 00:07:07 |
| 7. GROUP SORT BY STOPKEY | 79526 | 1397K | 7824K | 30450 (1) | 00:07:07 |
| 8. TABLE ACCESS FULL | ASYNCH_REQUEST | 284K | 5003K | 29804 (1) | 00:06:58 |
| 9. TABLE ACCESS BY INDEX ROWID | ASYNCH_REQUEST | 71156 | 11 M | 29141 (1) | 00:06:48 |
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
| 10. NESTED LOOPS | 71156 | 11 M | 29177 (1) | 00:06:49 |
| 11. UNIQUE FATE |
| 12. COLLECTION ITERATOR PICKLER FETCH | |
| 13. INDEX RANGE SCAN | ASYNCH_REQUEST_EFFECTIVE_IDX | 327K | | 392 (1) | 00:00:06 |
--------------------------------------------------------------------------------------------------------------------------------
Thank you
-Raj
Published by: tt0008 on August 22, 2012 20:34Hello
(1) you can see what plan has been used lately by running this query:
select begin_interval_time, plan_hash_value from dba_hist_sqlstat st, dba_hist_snapshot sn where st.snap_id = sn.snap_id and sql_id = 'fb0p0xv370vmb' order by begin_interval_time desc;
However, there is no guarantee that the next time you run this query, the latest plan will be chosen.
Periodically, the plan is regenerated (for example when new statistics are collected, is the structure of a table referenced in)
the query is changed etc.), and you can get 4 plans, or even a new function of many factors
(statistics, bind variable values, the optimizer, NLS etc settings settings.)(2) this question is too large for the answer to fit into a thread, there are books written on the subject. The short answer is:
If you know which of the 4 plans is right for you, then you can use a stored outline to lock in (it seems that you are not on 11g so SQL Profiler are not an option for you).
Or you can try to find out why the optimizer generates different plans and address the underlying issue (the most common reason is to bind peeking - but to say
course, we need to know more, starting with the text of your query).Best regards
Nikolai -
Coming out of the IPSec VPN connection behind Pix535 problem: narrowed down for NAT-Associates
Hello world
Previously, I've seen a similar thread and posted my troubles with the outbound VPN connections inside that thread:
https://supportforums.Cisco.com/message/3688980#3688980
I had the great help but unfortunatedly my problem is a little different and connection problem. Here, I summarize once again our configurations:
hostname pix535 8.0 (4)
all PC here use IP private such as 10.1.0.0/16 by dynamic NAT, we cannot initiate an OUTBOUND IPSec VPN (for example QuickVPN) at our offices, but the reverse (inbound) is very well (we have IPsec working long server /PP2P). I did a few tests of new yesterday which showed that if the PC a static NAT (mapped to a real public IP), outgoing connection VPN is fine; If the same PC has no static NAT (he hides behind the dynamic NAT firewall), outgoing VPN is a no-go (same IP to the same PC), so roughly, I have narrowed down our connection problem VPN is related to NAT, here are a few commands for NAT of our PIX:
interface GigabitEthernet0
Description to cable-modem
nameif outside
security-level 0
IP 70.169.X.X 255.255.255.0
OSPF cost 10
!
interface GigabitEthernet1
Description inside 10/16
nameif inside
security-level 100
IP 10.1.1.254 255.255.0.0
OSPF cost 10
!
!
interface Ethernet2
Vlan30 description
nameif dmz2
security-level 50
IP 30.30.30.30 255.255.255.0
OSPF cost 10
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface......
Global interface 10 (external)
Global (dmz2) interface 10
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 10 inside8 255.255.255.0
NAT (inside) 10 Vlan10 255.255.255.0
NAT (inside) 10 vlan50 255.255.255.0
NAT (inside) 10 192.168.0.0 255.255.255.0
NAT (inside) 10 192.168.1.0 255.255.255.0
NAT (inside) 10 192.168.10.0 255.255.255.0
NAT (inside) 10 pix-inside 255.255.0.0Crypto isakmp nat-traversal 3600
-------
Results of packet capture are listed here for the same PC for the same traffic to Server VPN brach, the main difference is UDP 4500 (PC with static NAT has good traffic UDP 4500, does not have the same PC with dynamic NAT):
#1: when the PC uses static NAT, it is good of outgoing VPN:
54 packets captured
1: 15:43:51.112054 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
2: 15:43:54.143028 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
3: 15:44:00.217273 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
4: 15:44:01.724938 10.1.1.82.1609 > 76.196.10.57.60443: S 2904546955:2904546955 (0) win 64240
5: 15:44:01.784642 76.196.10.57.60443 > 10.1.1.82.1609: S 2323205974:2323205974 (0) ack 2904546956 win 5808
6: 15:44:01.784886 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323205975 win 64240
7: 15:44:01.785527 10.1.1.82.1609 > 76.196.10.57.60443: P 2904546956:2904547080 (124) ack 2323205975 win 64240
8: 15:44:01.856462 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547080 win 5808
9: 15:44:01.899596 76.196.10.57.60443 > 10.1.1.82.1609: P 2323205975:2323206638 (663) ack 2904547080 win 5808
10: 15:44:02.056897 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323206638 win 63577
11: 15:44:03.495030 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547080:2904547278 (198) ack 2323206638 win 63577
12: 15:44:03.667095 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547278 win 6432
13: 15:44:03.740592 76.196.10.57.60443 > 10.1.1.82.1609: P 2323206638:2323206697 (59) ack 2904547278 win 6432
14: 15:44:03.741264 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547278:2904547576 (298) ack 2323206697 win 63518
15: 15:44:03.814029 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547576 win 7504
16: 15:44:06.989008 76.196.10.57.60443 > 10.1.1.82.1609: P 2323206697:2323207075 (378) ack 2904547576 win 7504
17: 15:44:06.990228 76.196.10.57.60443 > 10.1.1.82.1609: 2323207075:2323207075 F (0) ack 2904547576 win 7504
18: 15:44:06.990564 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323207076 win 63140
19: 15:44:06.990656 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547576:2904547613 (37) ack 2323207076 win 63140
20: 15:44:06.990854 10.1.1.82.1609 > 76.196.10.57.60443: 2904547613:2904547613 F (0) ack 2323207076 win 63140
21: 15:44:07.049359 76.196.10.57.60443 > 10.1.1.82.1609: R 2323207076:2323207076 (0) win 0
22: 15:44:17.055417 10.1.1.82.500 > 76.196.10.57.500: udp 276
23: 15:44:17.137657 76.196.10.57.500 > 10.1.1.82.500: udp 140
24: 15:44:17.161475 10.1.1.82.500 > 76.196.10.57.500: udp 224
25: 15:44:17.309066 76.196.10.57.500 > 10.1.1.82.500: udp 220
26: 15:44:17.478780 10.1.1.82.4500 > 76.196.10.57.4500: udp 80
27: 15:44:17.550356 76.196.10.57.4500 > 10.1.1.82.4500: 64 udp
28: 15:44:17.595214 10.1.1.82.4500 > 76.196.10.57.4500: udp 304
29: 15:44:17.753470 76.196.10.57.4500 > 10.1.1.82.4500: udp 304
30: 15:44:17.763037 10.1.1.82.4500 > 76.196.10.57.4500: udp 68
31: 15:44:17.763540 10.1.1.82.4500 > 76.196.10.57.4500: udp 56
32: 15:44:18.054516 10.1.1.82.4500 > 76.196.10.57.4500: udp 68
33: 15:44:18.124840 76.196.10.57.4500 > 10.1.1.82.4500: udp 68
34: 15:44:21.835390 10.1.1.82.4500 > 76.196.10.57.4500: udp 72
35: 15:44:21.850831 10.1.1.82.4500 > 76.196.10.57.4500: udp 80
36: 15:44:21.901183 76.196.10.57.4500 > 10.1.1.82.4500: udp 72
37: 15:44:22.063747 10.1.1.82.1610 > 76.196.10.57.60443: S 938188365:938188365 (0) win 64240
38: 15:44:22.104746 76.196.10.57.4500 > 10.1.1.82.4500: udp 80
39: 15:44:22.122277 76.196.10.57.60443 > 10.1.1.82.1610: S 1440820945:1440820945 (0) ack 938188366 win 5808
40: 15:44:22.122536 10.1.1.82.1610 > 76.196.10.57.60443:. ACK 1440820946 win 64240
41: 15:44:22.123269 10.1.1.82.1610 > 76.196.10.57.60443: P 938188366:938188490 (124) ack 1440820946 win 64240
42: 15:44:22.187108 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938188490 win 5808
43: 15:44:22.400675 76.196.10.57.60443 > 10.1.1.82.1610: P 1440820946:1440821609 (663) ack 938188490 win 5808
44: 15:44:22.474600 10.1.1.82.1610 > 76.196.10.57.60443: P 938188490:938188688 (198) ack 1440821609 win 63577
45: 15:44:22.533648 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938188688 win 6432
46: 15:44:22.742286 76.196.10.57.60443 > 10.1.1.82.1610: P 1440821609:1440821668 (59) ack 938188688 win 6432
47: 15:44:22.742927 10.1.1.82.1610 > 76.196.10.57.60443: P 938188688:938189002 (314) ack 1440821668 win 63518
48: 15:44:22.802570 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938189002 win 7504
49: 15:44:25.180486 76.196.10.57.60443 > 10.1.1.82.1610: P 1440821668:1440821934 (266) ack 938189002 win 7504
50: 15:44:25.181753 76.196.10.57.60443 > 10.1.1.82.1610: 1440821934:1440821934 F (0) ack 938189002 win 7504
51: 15:44:25.181997 10.1.1.82.1610 > 76.196.10.57.60443:. ACK 1440821935 win 63252
52: 15:44:25.182134 10.1.1.82.1610 > 76.196.10.57.60443: P 938189002:938189039 (37) ack 1440821935 win 63252
53: 15:44:25.182333 10.1.1.82.1610 > 76.196.10.57.60443: 938189039:938189039 F (0) ack 1440821935 win 63252
54: 15:44:25.241869 76.196.10.57.60443 > 10.1.1.82.1610: R 1440821935:1440821935 (0) win 0#2: same PC with Dynamic NAT, VPN connection fails:
70 packets captured
1: 14:08:31.758261 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
2: 14:08:34.876907 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
3: 14:08:40.746055 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
4: 14:08:42.048627 10.1.1.82.1074 > 76.196.10.57.60443: S 3309127022:3309127022 (0) win 64240
5: 14:08:42.120248 76.196.10.57.60443 > 10.1.1.82.1074: S 1715577781:1715577781 (0) ack 3309127023 win 5808
6: 14:08:42.120568 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715577782 win 64240
7: 14:08:42.121102 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127023:3309127147 (124) ack 1715577782 win 64240
8: 14:08:42.183553 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127147 win 5808
9: 14:08:42.232867 76.196.10.57.60443 > 10.1.1.82.1074: P 1715577782:1715578445 (663) ack 3309127147 win 5808
10: 14:08:42.405145 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715578445 win 63577
11: 14:08:43.791340 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127147:3309127345 (198) ack 1715578445 win 63577
12: 14:08:43.850450 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127345 win 6432
13: 14:08:44.028196 76.196.10.57.60443 > 10.1.1.82.1074: P 1715578445:1715578504 (59) ack 3309127345 win 6432
14: 14:08:44.058544 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127345:3309127643 (298) ack 1715578504 win 63518
15: 14:08:44.116403 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127643 win 7504
16: 14:08:47.384654 76.196.10.57.60443 > 10.1.1.82.1074: P 1715578504:1715578882 (378) ack 3309127643 win 7504
17: 14:08:47.385417 76.196.10.57.60443 > 10.1.1.82.1074: 1715578882:1715578882 F (0) ack 3309127643 win 7504
18: 14:08:47.394068 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715578883 win 63140
19: 14:08:47.394922 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127643:3309127680 (37) ack 1715578883 win 63140
20: 14:08:47.395151 10.1.1.82.1074 > 76.196.10.57.60443: 3309127680:3309127680 F (0) ack 1715578883 win 63140
21: 14:08:47.457633 76.196.10.57.60443 > 10.1.1.82.1074: R 1715578883:1715578883 (0) win 0
22: 14:08:57.258073 10.1.1.82.500 > 76.196.10.57.500: udp 276
23: 14:08:57.336255 76.196.10.57.500 > 10.1.1.82.500: udp 40
24: 14:08:58.334211 10.1.1.82.500 > 76.196.10.57.500: udp 276
25: 14:08:58.412850 76.196.10.57.500 > 10.1.1.82.500: udp 40
26: 14:09:00.333311 10.1.1.82.500 > 76.196.10.57.500: udp 276
27: 14:09:00.410730 76.196.10.57.500 > 10.1.1.82.500: udp 40
28: 14:09:02.412561 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
29: 14:09:04.349164 10.1.1.82.500 > 76.196.10.57.500: udp 276
30: 14:09:04.431648 76.196.10.57.500 > 10.1.1.82.500: udp 40
31: 14:09:05.442710 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
32: 14:09:11.380427 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
33: 14:09:12.349926 10.1.1.82.500 > 76.196.10.57.500: udp 276
34: 14:09:12.421502 10.1.1.82.1076 > 76.196.10.57.60443: S 3856215672:3856215672 (0) win 64240
35: 14:09:12.430794 76.196.10.57.500 > 10.1.1.82.500: udp 40
36: 14:09:12.481832 76.196.10.57.60443 > 10.1.1.82.1076: S 248909856:248909856 (0) ack 3856215673 win 5808
37: 14:09:12.527972 10.1.1.82.1076 > 76.196.10.57.60443:. ACK 248909857 win 64240
38: 14:09:12.529238 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215673:3856215797 (124) ack 248909857 win 64240
39: 14:09:12.608275 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856215797 win 5808
40: 14:09:12.658581 76.196.10.57.60443 > 10.1.1.82.1076: P 248909857:248910520 (663) ack 3856215797 win 5808
41: 14:09:12.664531 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215797:3856215995 (198) ack 248910520 win 63577
42: 14:09:12.725533 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856215995 win 6432
43: 14:09:12.880813 76.196.10.57.60443 > 10.1.1.82.1076: P 248910520:248910579 (59) ack 3856215995 win 6432
44: 14:09:12.892272 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215995:3856216293 (298) ack 248910579 win 63518
45: 14:09:12.953029 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856216293 win 7504
46: 14:09:12.955043 76.196.10.57.60443 > 10.1.1.82.1076: 248910579:248910579 F (0) ack 3856216293 win 7504
47: 14:09:12.955242 10.1.1.82.1076 > 76.196.10.57.60443:. ACK 248910580 win 63518
48: 14:09:12.955516 10.1.1.82.1076 > 76.196.10.57.60443: P 3856216293:3856216330 (37) ack 248910580 win 63518
49: 14:09:12.955730 10.1.1.82.1076 > 76.196.10.57.60443: 3856216330:3856216330 F (0) ack 248910580 win 63518
50: 14:09:13.019743 76.196.10.57.60443 > 10.1.1.82.1076: R 248910580:248910580 (0) win 0
51: 14:09:16.068691 10.1.1.82.500 > 76.196.10.57.500: udp 56
52: 14:09:16.227588 10.1.1.82.1077 > 76.196.10.57.60443: S 3657181617:3657181617 (0) win 64240
53: 14:09:16.283783 76.196.10.57.60443 > 10.1.1.82.1077: S 908773751:908773751 (0) ack 3657181618 win 5808
54: 14:09:16.306823 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908773752 win 64240
55: 14:09:16.307692 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181618:3657181742 (124) ack 908773752 win 64240
56: 14:09:16.370998 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657181742 win 5808
57: 14:09:16.411935 76.196.10.57.60443 > 10.1.1.82.1077: P 908773752:908774415 (663) ack 3657181742 win 5808
58: 14:09:16.417870 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181742:3657181940 (198) ack 908774415 win 63577
59: 14:09:16.509388 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657181940 win 6432
60: 14:09:16.708413 76.196.10.57.60443 > 10.1.1.82.1077: P 908774415:908774474 (59) ack 3657181940 win 6432
61: 14:09:16.887100 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181940:3657182254 (314) ack 908774474 win 63518
62: 14:09:16.948193 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657182254 win 7504
63: 14:09:19.698465 76.196.10.57.60443 > 10.1.1.82.1077: P 908774474:908774740 (266) ack 3657182254 win 7504
64: 14:09:19.699426 76.196.10.57.60443 > 10.1.1.82.1077: 908774740:908774740 F (0) ack 3657182254 win 7504
65: 14:09:20.060162 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908774741 win 63252
66: 14:09:20.062191 76.196.10.57.60443 > 10.1.1.82.1077: P 908774474:908774740 (266) ack 3657182254 win 7504
67: 14:09:20.063732 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908774741 win 63252
68: 14:09:20.063900 10.1.1.82.1077 > 76.196.10.57.60443: P 3657182254:3657182291 (37) ack 908774741 win 63252
69: 14:09:20.064098 10.1.1.82.1077 > 76.196.10.57.60443: 3657182291:3657182291 F (0) ack 908774741 win 63252
70: 14:09:20.127694 76.196.10.57.60443 > 10.1.1.82.1077: R 908774741:908774741 (0) win 0
70 packages shownWe had this problem of connection VPN IPsec from the years (I first thought it is restriction access problem, but it does not work or if I disable all access lists, experience of yesterday for the same restriction of the access-list shows longer than PC is not the cause). All suggestions and tips are greatly appreciated.
Sean
Hi Sean, please remove th lines highlighted in your pix and try and let me know, that these lines are not the default configuration of the PIX.
VPN-udp-class of the class-map
corresponds to the list of access vpn-udp-acl
vpn-udp-policy policy-map
VPN-udp-class
inspect the amp-ipsec
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 768
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the http
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the pptp
inspect the amp-ipsec
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
IP verify reverse path to the outside interface
Thank you
Rizwan James
-
IPSec VPN: connected to the VPN but cannot access resources
Hello
I configured a VPN IPSec on two ISP with IP SLA configured, there is a redundancy on the VPN so that if address main is it connect to the VPN backup.
QUESTIONS
-Connect to the primary address and I can access resources
-backup address to connect but can not access resources for example servers
I want a way to connect to backup and access on my servers resources. Please help look in the config below
configuration below:
interface GigabitEthernet0/0
LAN description
nameif inside
security-level 100
IP 192.168.202.100 255.255.255.0
!
interface GigabitEthernet0/1
Description CONNECTION_TO_DOPC
nameif outside
security-level 0
IP address 2.2.2.2 255.255.255.248
!
interface GigabitEthernet0/2
Description CONNECTION_TO_COBRANET
nameif backup
security-level 0
IP 3.3.3.3 255.255.255.240
!
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
boot system Disk0: / asa831 - k8.bin
boot system Disk0: / asa707 - k8.bin
passive FTP mode
clock timezone WAT 1
DNS domain-lookup outside
DNS server-group DefaultDNS
Name-Server 4.2.2.2
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of object obj-200
192.168.200.0 subnet 255.255.255.0
Description LAN_200
network of object obj-202
192.168.202.0 subnet 255.255.255.0
Description LAN_202
network of the NETWORK_OBJ_192.168.30.0_25 object
subnet 192.168.30.0 255.255.255.128
network of the RDP_12 object
Home 192.168.202.12
Web server description
service object RDP
source eq 3389 destination eq 3389 tcp service
network obj012 object
Home 192.168.202.12
the Backup-PAT object network
192.168.202.0 subnet 255.255.255.0
NETWORK LAN UBA description
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
network-object object obj-200
network-object object obj-202
access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any
access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any
OUTSIDE_IN list extended access permit icmp any any idle state
OUTSIDE_IN list extended access permit tcp any object obj012 eq inactive 3389
gbnltunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnltunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0
BACKUP_IN list extended access permit icmp any any idle state
access extensive list ip 196.216.144.0 encrypt_acl allow 255.255.255.192 192.168.202.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
backup of MTU 1500
Backup2 MTU 1500
local pool GBNLVPNPOOL 192.168.30.0 - 192.168.30.100 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any backup
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25
NAT (inside, outside) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.30.0_25 NETWORK_OBJ_192.168.30.0_25 non-proxy-arp-search of route static destination
!
network of object obj-200
NAT dynamic interface (indoor, outdoor)
network of object obj-202
dynamic NAT (all, outside) interface
network obj012 object
NAT (inside, outside) interface static service tcp 3389 3389
the Backup-PAT object network
dynamic NAT interface (inside, backup)
!
NAT source auto after (indoor, outdoor) dynamic one interface
Access-group interface inside INSIDE_OUT
Access-group OUTSIDE_IN in interface outside
Access-group BACKUP_IN in the backup of the interface
Route outside 0.0.0.0 0.0.0.0 2.2.2.2 1 followed by 100
Backup route 0.0.0.0 0.0.0.0 3.3.3.3 254
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
WebVPN
value of the URL-list GBNL-SERVERS
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
http server enable 441
http 192.168.200.0 255.255.255.0 inside
http 192.168.202.0 255.255.255.0 inside
http 192.168.2.0 255.255.255.0 inside
http 192.168.30.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 backup
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
ALS 10 monitor
type echo protocol ipIcmpEcho 31.13.72.1 interface outside
NUM-package of 5
Timeout 3000
frequency 5
Annex monitor SLA 10 life never start-time now
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto IPSec_map 10 corresponds to the address encrypt_acl
card crypto IPSec_map 10 set peer 196.216.144.1
card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
ipsec_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
ipsec_map interface card crypto outside
gbnltunnel card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
backup of crypto gbnltunnel interface card
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = GBNLVPN.greatbrandsng.com, O = GBNL, C = ng
Configure CRL
Crypto ikev1 allow inside
Crypto ikev1 allow outside
Crypto ikev1 enable backup
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
enable client-implementation to date
!
track 10 rtr 100 accessibility
!
Track 100 rtr 10 accessibility
Telnet 192.168.200.0 255.255.255.0 inside
Telnet 192.168.202.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.202.0 255.255.255.0 inside
SSH 192.168.200.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 backup
SSH timeout 30
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access inside
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
WebVPN
allow outside
enable backup
activate backup2
internal gbnltunnel group policy
attributes of the strategy of group gbnltunnel
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
greatbrandsng.com value by default-field
Group Policy 'Group 2' internal
type of remote access service
type tunnel-group gbnltunnel remote access
tunnel-group gbnltunnel General-attributes
address GBNLVPNPOOL pool
Group Policy - by default-gbnltunnel
gbnltunnel group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group GBNLSSL remote access
type tunnel-group GBNL_WEBVPN remote access
attributes global-tunnel-group GBNL_WEBVPN
Group Policy - by default-gbnltunnel
tunnel-group 196.216.144.1 type ipsec-l2l
IPSec-attributes tunnel-group 196.216.144.1
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
HPM topN enable
Cryptochecksum:6004bf457c9c0bc1babbdbf1cd8aeba5
: end
When you say that "the external interface is downwards using failover techniques" you mean this failover occurred because the ASA is no longer able to reach the 31.13.72.1? Not that the actual interface is broken?
If this is the case, then the NATing is your problem. Since you're using the same VPN pool for VPN connections the ASA cannot distinguish between the two streams of traffic if the external interface is still in place. The SLA tracking only removes a route in the routing table, but does not affect what happens in the NAT process.
try to change the NAT statement follows him and the test (don't forget to remove the other statements to exempt of NAT for this traffic during the test):
NAT (inside,any) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25
If this does not work, I would either turn off the external interface when a failover occurs, or create a second connection profile that contains a separate mass of IP for the VPN connection and ask users to connect using this profile when a failover takes place. Don't forget to create Nat exempt instructions for this traffic also.
--
Please note all useful posts
-
VPN access query remote ASA - several group policies for the unique connection profile
Hi all
Two quick questions here that I need to help.
1. in an ASA 5525, is it possible to have several group policies for a single connection profile?
Scenario: A customer is running F5 Firepass to their VPN solution and this device is used by them to have multiple strategies group by the connection profile. We plan to migrate them to ASA (5525) and I don't know if the ASA can support that.
2. in an ASA-5525 for Clientless Remote access VPN, can pass us the page to connect to an external server? For example, if I have a connection with a URL profile setup: "'https://wyz.vpn.com/ ';" for the LDAP/Radius Authentication, but for https://wyz.vpn.com/data and https://wyz.vpn.com/test I want to HTTP based authentication form and this page needs to be sent to an external server that is to say ASA step will manage this page, but rather the first page for this is served by the external server.
Scenario: One of our clients is running F5 Firepass to their VPN solution. On the F5 they have pages of configuration such as the https://wyz.vpn.com/ that the F5 shows to the user when they connect via VPN without client; However if the user types https://wyz.vpn.com/data in the browser, the traffic comes to the F5, but F5 redirects this traffic to an external server (with an external url as well). Then it's this external server that transfers the first page of the user requesting authentication for HTTP form based authentication information.
Thanks in advance to all!
Hello
You can have fallback to LOCAL only primary method.
http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa90/configuration/gu...
HTH
Averroès.
-
IPSec sequence numbers not working not for the multi VPN
a site at a single site VPN works no problem, but when I add the second peer in the concentrator, router it does not connect. There is no routing in place that all routers are connected to the same switch, and with no crypto card they can all two ping 192.168.2.1. With crypto card only 192.168.2.2 can ping 192.168.2.1. I'm at a loss as to what I'm doing wrong, it seems simple I just add the Test input with a different number, but it won't work.
Ask any other question you can think of. I followed the same controls on both spoke routers so that it seems that it would be in the hub, router, but he beat me as to why.
Thanks for the help.
Concentrator, router:
----------------------------------------------------------------------------------------------------------------------------------------------
R1 #sh card crypto
1 test card crypto ipsec-isakmp
Peer = 192.168.2.2
Expand the IP 110 access list
access ip-list 110 permit a whole
Current counterpart: 192.168.2.2
Life safety association: 4608000 kilobytes / 86400 seconds
PFS (Y/N): N
Transform sets = {}
Test,
}
Interfaces using crypto sheet test:
FastEthernet0/0
2 ipsec-isakmp crypto map test
Peer = 192.168.2.3
Expand the IP 110 access list
access ip-list 110 permit a whole
Current counterpart: 192.168.2.3
Life safety association: 4608000 kilobytes / 86400 seconds
PFS (Y/N): N
Transform sets = {}
Test,
}
Interfaces using crypto sheet test:
FastEthernet0/0
---------------------------------------------------------------------------------------------------------------------------------------------
R2 #sh card crypto
1 test card crypto ipsec-isakmp
Peer = 192.168.2.1
Expand the IP 110 access list
access ip-list 110 permit a whole
Current counterpart: 192.168.2.1
Life safety association: 4608000 kilobytes / 86400 seconds
PFS (Y/N): N
Transform sets = {}
Test,
}
Interfaces using crypto sheet test:
FastEthernet0/0
----------------------------------------------------------------------------------------------------------------------------------------------
R3 #sh card crypto
1 test card crypto ipsec-isakmp
Peer = 192.168.2.1
Expand the IP 110 access list
access ip-list 110 permit a whole
Current counterpart: 192.168.2.1
Life safety association: 4608000 kilobytes / 86400 seconds
PFS (Y/N): N
Transform sets = {}
Test,
}
Interfaces using crypto sheet test:
FastEthernet0/0
There is a typing error in the IP for the PSK on R3.
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni
Maybe you are looking for
-
I'm having a problem with foxfire.
Yes, a couple of days, I open foxfire and got in no problem, but later in the day I got on the net and open foxfire and it opened very well but after having popped up, he gave me a small box in the middle of the screen and it won't let me access anyt
-
How to move the chopsticks?
I want to move an existing control to a number of offset pixels down. I know that I can destroy the control and then re - introduce in the Panel at its new location, and I saw the example of movectrl.fp, but it is a task much simpler than that, I'm n
-
HP Photosmart 6520 paper set-match using previously coloured certificate
I bought a pristine certificate previously colored, and she has a blue border, dark on the left side and the rest is mainly yellow (a certificate of landscape). With the help of Powerpoint 2013, running on Windows 7, I tried to print a text on the ce
-
Smartphones blackBerry HS-655 + wireless headset and the "BOLD"
I have the HS-655 + wireless headset and the "BOLD" and I want to know why I can't listen to music using my bluetooth?
-
CSS in the properties panel is dark.
Some of my CSS rules are blackened (highlighted in black) in my properties panel.This means there is something wrong with the CSS in my site?Ideas and explanations would be appreciated.I use a Mac Book Pro retina 15, OS 10.9.5 DW CS6Thank youMG