the group policies for anyconnect
Does anyone know how to create an ACL for a group policy from the seller, I have created the need to only allow certain Ip hosts and reject anything else. This is for the anyconnect vpn. Any help would be appreciated.
I guess that's what you're looking for
allow the you need to allow and deny the rest in the ACL
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080975e83.shtml
Tags: Cisco Security
Similar Questions
-
VPN access query remote ASA - several group policies for the unique connection profile
Hi all
Two quick questions here that I need to help.
1. in an ASA 5525, is it possible to have several group policies for a single connection profile?
Scenario: A customer is running F5 Firepass to their VPN solution and this device is used by them to have multiple strategies group by the connection profile. We plan to migrate them to ASA (5525) and I don't know if the ASA can support that.
2. in an ASA-5525 for Clientless Remote access VPN, can pass us the page to connect to an external server? For example, if I have a connection with a URL profile setup: "'https://wyz.vpn.com/ ';" for the LDAP/Radius Authentication, but for https://wyz.vpn.com/data and https://wyz.vpn.com/test I want to HTTP based authentication form and this page needs to be sent to an external server that is to say ASA step will manage this page, but rather the first page for this is served by the external server.
Scenario: One of our clients is running F5 Firepass to their VPN solution. On the F5 they have pages of configuration such as the https://wyz.vpn.com/ that the F5 shows to the user when they connect via VPN without client; However if the user types https://wyz.vpn.com/data in the browser, the traffic comes to the F5, but F5 redirects this traffic to an external server (with an external url as well). Then it's this external server that transfers the first page of the user requesting authentication for HTTP form based authentication information.
Thanks in advance to all!
Hello
You can have fallback to LOCAL only primary method.
http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa90/configuration/gu...
HTH
Averroès.
-
apply the group policy for the screen saver without copying the screen saver on all computers
Hello
I have applied the group policy for server screen saver 2008 but do run
I copied the file on each computer .scr.
is there a way to push file of screen directly from the server without copying it to each computer on the network?
or is there a software that can automatically run the screensaver on the network?Hello
The business support, you can find forums on TechNet, see the following links:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
http://social.technet.Microsoft.com/forums/en/category/w7itpro/
-
Apex 5, user "Is in the group" works for authorization seems to not work
Hello team Apex,
Apex 5
I would use the construction Type of plan (user) "Is in the group" authorization feature, but it seems to not work.
The user is in the group but nevertheless is not allowed.
I checked this with "& APP_ALIAS. ' in the group element - that's how I would use it - and the Group static 'true' name too.
(We have a group for all applications, where the group name is the same name of the App - just to understand the call below.)
When I use it to place a further authorization scheme with "PL/SQL function body:
Return apex_util.current_user_in_group (v ('APP_ALIAS'));
-It works as expected.
Can you please verify this?
Thank you in advance!
Concerning
André
Hi Andre,
What type of authentication scheme you use? Because, according to the text of the authorization scheme aid groups will be just picked up for the authentication of the account of the APEX.
- Group: enter a group name. Authorization succeeds if the group is activated as a dynamic group for the session (see APEX_AUTHORIZATION. ENABLE_DYNAMIC_GROUPS). If the application uses authentication to accounts Express request, this check also includes workspace groups that are granted to the user. If database authentication is used, this check also includes database roles that are granted to the user.
I just tried "Is in the group" and had no problem to check my groups.
BTW, in your PL/SQL code, there is no need to use the function of V, just use bind variables as syntax: APP_ALIAS
Concerning
Patrick
-
The use of certificates as the authentication method for AnyConnect VPN
I'm trying to add certificates as authentication method for one of my AnyConnect connection profiles, that is, by using the option 'Corresponding certificate' available in the profile of the Client AnyConnect. My question concerns the "Distinguished Name Entry" options available. I know what some of them refer to the (for example, "TRANSMITTER-CN" is just like that), but some of them I don't know ("GENQ", "EA", etc.). Is there a reference somewhere that I can use to understand what each of these options to average? Here a sreenshot of the window in question. Thank you!
The order has a good explanation of the various DN fields. Here is a copy of the inscription:
Tag values are as follows:
DNQ = qualifier DN
Generational qualifier = GENQ
I have original =
GN = first name
N = name
SN = surname
IP = IP address
SER = sΘrie numΘro
UNAME = unstructured name
EA = address Email
T = Title
O = organization name
L = local
SP = State/Province
C = country
OU = organizational unit
CN = common name -
Non-Cisco guy here needs to install the activation key for AnyConnect
Hello
I downloaded the key and there seems to be an "authorization key", and below the list of services provides the key
the serial number of my 5510 and then 5 groups of numbers. I guess that 5 of the numbers 'groups' are the activation key.
I tried using PuTTY to the console and typed:
> t conf
conf >-activation key-->, and then the series of numbers. I assumed that I had to put a 0 x in front of them all, but outside itkind as I
I put the last number and crushes a little. What is going on?
Also, we have the ASDM, if I can use it would be simpler. How would I do that?
Help!
-ar
You are welcome.
Please mark your answers question and/or useful responses.
-
Can substitute us the group policy for wireless network settings
Original title: try to substitute wireless system admin settingsOur sysadmin makes me crazy, he has networked wireless manual connection and now I have to click the network button whenever I start my computer.the box "connect automatically" is not simply there. I asked and he said it is his policy. (well, because he is sitting on a desk all day and never moves, so he cares)Is there a way to override the policy settings, that he pushed? I am an administrator on my own computer.Thanks 1millionHello
If you are connected to a domain, then you will not be able to replace the settings that were applied by the administration of the system.
See also:
Group Policy
http://msdn.Microsoft.com/en-us/library/Windows/desktop/ee663280 (v = vs. 85) .aspx
-
Query to find the group name for the Business of the employee
Hello
I'm new to the HRMS module.
I want to find employee (per_all_people_f) information about commercial groups.
I found a HR_ALL_ORGANIZATION_UNITS database table, but there are many records in this table with the same business_group_id that in itself is not a unique key.
Could someone help me find the link between employees and their BG.
Thank you.Hello
The link is between per_all_people_f.business_group_id and hr_all_organization_units.organization_id (i.e., the pharmacokinetics of the table). It will be useful.
Kind regards.
-
Ungroup a group and keep the scriptlabel for each item in the Group
Hello
does anyone know how to ungroup a group of rectangles with a certain tag (example groupA) give one every rectangle a clean label (the same text groupA)
I can find the Group and ungroup it but I can't label the rectangles...
var oPageItems = app.activeDocument.allPageItems;
for (var j = oPageItems.length - 1;) j > = 0; d-) {if (oPageItems [j] .label == ("groupA")) {oPageItems [j] .ungroup ()))}}
...???
Help, please
Hello
front
oPageItems [j] .ungroup ();
go through the loop and set a label for each item within the Group:
for (var k; k)< opageitems[j].length;="">
oPageItems [j] [k] .label = "groupA";
assuming that your oPageItems [j] is a group indeed.
I hope that...
-
What is the difference when the IP pool is placed under the group policy and SSL tunnel-group
Hi usually ip address pool is placed under the group policy in Anyconnect VPN, but I noticed the ip address pool is also placed under the Anyconnect VPN tunnel-group in some ASA. What is the difference between both of them? Thank you
Both are used for the same purpose, but that under group policy always takes preference.
Kind regards
Sandra
If you find the answer useful, please mark it as correct while others can benefit from the discussion.
-
Can not add members to a group as the group administrator
Hello
My colleague has created a 'WE_PM_group' group and added me to this group with the "group administrator" role.
But when I connect to the tool "Create or add new members of the group", then after SSO and grateful the "read and understood the guidelines Beehive online", it does not show the "WE_PM_group" (it does show some groups) and I can only create a group.
My question: How can I add members to the group that my colleague created and I am the group administrator?
Note: When I connect to the Administration of BeehiveOnline tool, I indeed see my e-mail address in the 'WE_PM_group' group and with the correct role (Administrator of the Group)
Thanks for your help,
PeterYou can add users to a group, your colleague whop created the group to add your email address in the field E-mail of managers. Any user with their email address in this field will be able to manage the group.
Phil
-
Associated with the process task assignment to the Group
Hello
I have a RO: for example. Laptop
Process definition for this task and the process of definition, I added a process task create user...
and I'm asigning this task to a group.
But this approval request goes to xelsysadm instead of Member of the group.
Why is it so?I think you are confused between the approval process and procurement process.
You must assign the task to the group necessary for the approval process.
Once your application for approval is xelsysadm I guess you have the standard approval process.
Entrust State standard to your group and the approval will go to your group.Hope this helps,
Sagar -
How to change group policy for the system restore will create restore point
I recently installed an SSD with windows 7, it's the default OS and hard drive on a system dual boot. I also have my old HHD with windows vista home premium. I had problems using the restore of the system with the SSD drive and read on a forum that the restoration of the system causes problems when it is used on an SSD. I have disable restoring the system to the SSD, but still he had checked to allow restoration on the vista disk and a 500 GB drive, I have use for storage.
I managed to create a restore point when you are using windows 7 OS, but when I used my vista drive, and wanted to create additional restore points for two HHD disks, it does not allow the creation of restore points by group policy settings. I regularly create restore for the SSD disk and have created one for the HHD Vista since the system restore does not create additional restore points now.
How can I change my group policy settings to enable restore points to create the disk under Vista. I don't remember changing anything that might have caused it, is there a chance that a horse of Trojan or virus caused this? I have Webroot antivirus and currently aired Kaspersky Anti-virus on Vista drive. I also ran the Microsoft safety scanner in safe mode and normal startup mode, none of the virus scanners have found problems, so I'm pretty sure I don't have a Trojan or a virus.
To the point, how to make appropriate changes to allow the restoration of the system to work for my two HHD disks. Better yet is there a way to restore completely all original windows default system settings without having to do a clean reinstall.
You can provide any help would be greatly appreciated
Thank you
Skyraider 33
Hello
You receive an error message when creating a new system for Windows vista restore point?
Using the Group Policy Editor
If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in,
Follow these steps:
1. Click Start, type gpedit.msc and press ENTER
2. go to the following branch: Computer Configuration | Administrative templates | System | System restore
3. double click on disable the Configuration and set it to not configured.
Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
4. exit the Group Policy Editor.If using the Group Policy Editor do not fix the problem, try the registry fix from the following.
Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
Using the registry editor
1. Click Start, type regedit.exe and press ENTER
2. navigate to the following key:
HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
3. in the right pane, delete the value named DisableConfig
4. exit the registry editor. -
Hide the tunnel-group in client anyconnect
Hi all
How to hide dropdown menu profiles that don't interest me not?
see always all tunnel group set up on asa.
in path of the cisco anyconnect client, I have preferences.xml.
Thanks in advance for your help
concerning
If the group alias are configured on the SAA, no matter which user goes to the external interface to connect to the VPN will see the list.
ASA administrator may eventually publish a URL shortcut using the "group-url" attribute when configuring the SSL VPN. Here is a link to the section of the configuration guide to do so. in this place you can browse (or point AnyConnect) directly to this URL and skip having to select from the drop-down list.
-
What is the preferred means of creating group policies?
What is the preferred means of creating group policies?
For example policy of GP1 for wallpaper and GP2 political mapping of drive and printer.
or to combine politics both GP1 and GP2 in unique group as GPDOMAIN policy.
Application of associated Win2K8 R2 group policies
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Maybe you are looking for
-
definition of Virgin in general options
When I click on the options, I can access everything except what belongs to the title of the general tab, the tab appears but below is empty. I use the latest beta version.
-
I tried to update to Firefox several times, and I completely uninstalled and then installed again.
-
The best methods to prepare to read a display 7-segment
What are the best techniques to use to get the imaqFindLCDSegments works well? I'm currently thresholding of image and using erosion Morpholgy tool to separate the segments but am gettign an error saying that "the input image is not an LCD or LED val
-
Acer Aspire One 10 keyboard virtual autofill
Hello. How can I disable the AutoComplete for the words option in the virtual keyboard? Thanka
-
The FTP of Dell Enterprise site is down or having problems? I have several servers I want to perform updates on through the life cycle of the order and get the failure of authentication FTP-enter correct user name and password and try again. Sugges