VPN and web on the links
Hi all
I look through the Group and see a lot of questions
the outgoing on two internet links traffic load balancing. My question is
a little different and I can't find an answer online.
I have an ASA 5550 with 2 internet links, A and B.
Currently, the SAA doing NAT for the company on A network
connection and receive inbound connections from the VPN client on the same
A connection. All this is perfect. But what I would also
I, the ASA accepts connections customer VPN on the link of B. I have
can't get this to work.
Anyone have any idea where to look?
Thank you!
No, this is not something that is supported. VPN Client that connects to two 2 links ISP requires 2 default gateways that are active at the same time. ASA does not support this configuration. It does not support 2 default Active gateways at the same time. It supports only 2 links ISP when it is configured as a backup when the primary ISP link is down.
However, you can configure the second supplier of access VPN site to site and the first ISP for internet access and vpn client out normal. Because with the site to site vpn, you know the static ip address of the peer, then you can create a static route to the peer pointing to the second ISP link.
Hope that makes sense.
Tags: Cisco Security
Similar Questions
-
All the links on a page was taken over by ads. How can I stop and go to the linked site correct
You may have ad / bad-ware. More information can be found in the article troubleshooting Firefox problems caused by malware .
Run most or all of the listed malware scanners. Each works differently. If a single
program forget something, someone else can pick it up.Adblock more {web link}
Blocks annoying video ads on YouTube, Facebook ads, banners
and much more. Adblock Plus blocks all the annoying ads, and
supports Web sites by blocking is not discrete (configurable) default ads.Pop-up Addon Adblock more {web link}
Adblock Plus pop-up Addon - extends the functionality of blocking of the
Adblock Plus for those annoying windows pop up that opens on the mouse
clicks and other actions of the user.Forum; Homepage of Adblock Plus {web link}
-
When I click on a link in a new tab is no longer open in Firefox. Now, I have to copy the link, manually open a tab and then paste the link. Simply, this started happening a few days ago and I haven't changed anything in my settings. Can anyone help? Thank you
This problem may be caused by an extension that is not working properly.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read suggestions?
original title: Windows Audio recordingHello
(1) what version of the Windows operating system is installed on your computer?
(2) did you of recent changes to the computer before the show?
(3) what is the file format of the files you are trying to play?
(4) you get an error message?
(5) you are able to hear the sound of Windows and other applications?
(6) that Microsoft Fixit ran?
You can try the following methods and check if it helps.
Method 1: No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsMethod 2: Problems running Windows Media Player
Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click the Windows Media Player settings.
See this link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Method 3: Solving problems run Windows Media Player library
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
-
VPN and Annyconnect on the same port
You can configure asa firewall to allow the anyconnect VPN and then allow the traffic of users annyconnect cross tunnel vpn on the firewall even on remote site? Users on the local network can connect to a remote site via vpn tunnel but not anyconnect users.
Thank you
Of course, it is a common requirement. You just need to make sure to include the address pool of the AnyConnect users in your access list mentioned by the cryptomap used in the tunnel of site.
-
When I click on the link from a web page I get redirected to a completely different page. How can I stop this?
It seems that your computer is infected. You can continue cleaning your system getting assistance at a forum free online, as one of those listed below, who specialize in solving these issues... You will need to register first.
-
I am reorganizing my images on my Web site and cannot update the links!
I am reorganizing my images on my site. I got all my images together in the pictures folder, but now I find that I have too many.
So I was moving the images to new subfolders that I created in the folder of images on the local display.
I managed to accomplish half of my work successfully, every time be asked if I wanted to update the links, what I'm doing. Now I get is more invited to update my links despite the prompt to be turned on in my general preferences panel. I even tried to change the "promt" say "always" in the general Panel of preferences, but whenever he reacts as if I chose '' never. ''
Please could you help me understand why this is happening. It will take to always update by hand! I use dreamweaver cs5.
Ah, that's easy.
Your cache I messed up. Release of Dreamweaver. Restart Dreamweaver. Most of the time dealing with the problem.
But you may need to clear the cache for this site. Davis powers details how in the FAQ:
-
Whenever I do a search and click on a website search results, I am confused on some other Web site, usually a few ad-site.
I then have to click the back button and click the link again and it usually takes me on the site that I wanted to. Is it a problem with my computer of viruses, or a problem with firefox or google?Download, install and update as much of the following as possible until your infections are cleaned.
- The free versions of these scanners will detect infections and clean your system; no need to buy
- Scanners different malware detect some malware that other scanners do not have.
- If you are unable to download malicious programs,
- change the name of the Installer before you save the download on your hard drive, and
- Once installed, go to the installation to the program folder and change the name of the executable file of the program (i.e. for Malwarebytes Anti-Malware, change mbam.exe to xyz - mb.exe), then update the program and run the scan.
- You may need to download on a non infected computer, change the name of the Setup program, copy setup from a CD or USB and transport to your system for installation.
- Some stubborn malware should be deleted in Windows Safe Mode with setting network '. Warning: download all the tools first, then disconnect your modem before entering Mode Windows safe, as your firewall and AV/AS probably does not load mode Windows safe. See:
- Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
- SuperAntispyware - http://www.superantispyware.com/
- AdAware - http://www.lavasoftusa.com/software/adaware/
- Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
- Windows Defender - http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
- Dr Web Cureit - http://www.freedrweb.com/cureit/
If they cannot find or cannot remove the infection (s), post it in one of these specialized forums using malware removal:
- Read and follow their rules for display
- Follow the instructions to the letter
- Be patient; you are put in a queue and you will get a response when they get to your message
- http://bleepingcomputer.com
- http://www.spywareinfoforum.com/
- http://www.spywarewarrior.com/index.php
- http://Forum.aumha.org/
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
CS6 and Design and Web download broken links
All links on this page: Download Adobe Creative Suite 6 applications return an error:
Access denied
You do not have permission to access to " " http://trials2.Adobe.com/AdobeProducts/DSST/CS6/Win32/DesignWebPremium_CS6_LS16.7z "on this server. "
Reference #18.25fe7683.1473955114.13a95a46
My workplace has a license for the Design and Web Premium CS6, and I have a copy of the certificate for it. I had to reformat my PC, so I need to re - install CS6 Design and Web Premium. However, the download does not work.
How can I get a copy of the software that corresponds to our current license?
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If he continues to not try to use a different browser.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
Try to install the CS6 and Design and Web on the new hard drive
MacBook Pro OS10.11.1 of operation. I try to install CS6 and Web Design Premium CS6 DesWebPrm 1.sparseimage. It is a registered in my years of hard drive and has worked in the past, whenever I need to re - install. Now it hangs in the installation process to 'Currently install Adobe Dreamweaver Widget Browser' installation is at a standstill at 31%
Can someone help me understand this issue?
Use the bons installation file.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC | XI, X | 9,8 | 9 standard
- Premiere Elements: 14, 13, 12, 11, 10: 9, 8, 7
- Photoshop Elements: 10, 12, 14, 11, 13. 9,8,7
- Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
window using the Lightroom 3 link to see these "important Instructions".
-
client ipSec VPN and NAT on the router Cisco = FAIL
I have a Cisco 3825 router that I have set up for a Cisco VPN ipSec client. The same router is NAT.
ipSec logs, but can not reach the internal network unless NAT is disabled on the inside interface. But I need both at the same time.
Suggestions?
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group myclient
key password!
DNS 1.1.1.1
Domain name
pool myVPN
ACL 111
!
!
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
market arriere-route
!
!
list of card crypto clientmap client VPN - AAA authentication
card crypto clientmap AAA - VPN isakmp authorization list
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!interface Loopback0
IP 10.88.0.1 255.255.255.0
!
interface GigabitEthernet0/0
/ / DESC it's external interfaceIP 192.168.168.5 255.255.255.0
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
media type rj45
clientmap card crypto
!
interface GigabitEthernet0/1/ / DESC it comes from inside interface
10.0.1.10 IP address 255.255.255.0
IP nat inside<=================ipSec client="" connects,="" but="" cannot="" reach="" interior="" network="" unless="" this="" is="">=================ipSec>
IP virtual-reassembly
the route cache same-interface IP
automatic duplex
automatic speed
media type rj45!
IP local pool myVPN 10.88.0.2 10.88.0.10
p route 0.0.0.0 0.0.0.0 192.168.168.1
IP route 10.0.0.0 255.255.0.0 10.0.1.4
!IP nat inside source list 1 interface GigabitEthernet0/0 overload
!
access-list 1 permit 10.0.0.0 0.0.255.255
access-list 111 allow ip 10.0.0.0 0.0.255.255 10.88.0.0 0.0.0.255
access-list 111 allow ip 10.88.0.0 0.0.0.255 10.0.0.0 0.0.255.255Hello
I think that you need to configure the ACL default PAT so there first statemts 'decline' for traffic that is NOT supposed to be coordinated between the local network and VPN pool
For example, to do this kind of configuration, ACL and NAT
Note access-list 100 NAT0 customer VPN
access-list 100 deny ip 10.0.1.0 0.0.0.255 10.88.0.0 0.0.0.255
Note access-list 100 default PAT for Internet traffic
access-list 100 permit ip 10.0.1.0 0.0.0.255 ay
overload of IP nat inside source list 100 interface GigabitEthernet0/0
EDIT: seem to actually you could have more than 10 networks behind the routerThen you could modify the ACL on this
Note access-list 100 NAT0 customer VPN
access-list 100 deny ip 10.0.1.0 0.0.255.255 10.88.0.0 0.0.0.255
Note access-list 100 default PAT for Internet traffic
access-list 100 permit ip 10.0.1.0 0.0.255.255 ay
Don't forget to mark the answers correct/replys and/or useful answers to rate
-Jouni
-
Allowing the VPN and return to the ASA 5520
Here is the configuration:
Outside Interface: 50.50.50.5
Internal interface: 192.168.1.5
Wireless interface: 192.168.2.5
The wireless interface is used for the guest access to internet and you can't find the internal servers or workstations. Offiste employees, we use Cisco VPN remotely in through the firewall.
That is the question, an itinerant person comes into the office, connects to the network (no LAN port available) wireless and then wants the VPN in a work. Can that be allowed through the ACL to allow traffic like that or would be using Cisco AnyConnect? I don't want to "overall" activate the ability for Wireless talk range to the inside interface, but allow VPN access. At first glance, I guess the ASA for not allowing this, but try to get some clarification, thank you!
And if it's possible, I can see security implications, so I'm also looking for information best practice as well.
Hello Mrjwilson,
5 stars for you
Thanks for sharing the solution, check now the question as answered so future users can learn of your problem.
-
Links NOT alert missing images and not in the links Panel
Don't know if this is a consequence to move my files and account across to a new Mac Pro and re-configuration of hard disk locations where files image linked, but... I'm working on a document which lasted from systems - come finally to an end, and I write PDF printing and found this problem.
InDesign CC 9.2.1 running on the Mavericks 10.9.2 NOT indicate images missing links in the links Panel. In fact it is not showing the image on the page is still in the document - it does not appear in the links Panel, although I can see the image on the page.
I noticed this when there is evidence verifying a high-resolution PDF print, and the picture looked at low resolution. weird, but should not. I went back to InDesign file to query the image, and found when I clicked it, it has not been highlighted in the links Panel - where I active warnings, IPR and other columns so I can quickly check problems. It was not at all here. InDesign seems to be blind to the image. When I right click on images of rogue on the page I do not get the "Graphics" section at the bottom of the drop-down list as I do with images okay. I guess because InDesign doesn't even know it's there?
Basically, the image is visible on the page, but InDesign doesn't know... What gives? I'll have to go through a long document now by clicking on each image to verify it is showing in the links Panel, and then re-release of links each image that seems to be completely lost as much as InDesign is concerned not even knowing it's there.
I have "reset all warning dialogs. Made no difference.
I worry about what other files will do it for me now and how much time will be lost carefully checking validity of each image.
John Mensinger wrote:
Oh, and... drag & drop = place, so if indeed your apparent no paired images were pulled, there may be something wrong with that.
Drag and drop from the Finder, Windows Explorer or bridge are all equivalent to the file > Place..., but drag it from Photoshop or another application, it would be the same as Edit > paste.
-
Can I put my creative suite (design and web) to the master collection?
I have the suite premium design and web and I was wondering if I could pass as a result of master or buy the missing applications in a package?
You can switch to the Master Collection CS6 of any CS5 and CS5.5 Creative Suite.
Please check http://shop.adobe.com/store/adbehap/en_IN/DisplayProductDetailsPage/ThemeID.25225600/produ ctID.247441100 for the upgrade path.
-
I can follow the openings and click on the links in my emails?
Sometimes I send emails that contain a number of web links.
I am able to follow:
who opens their email?
What links they click on?(as I do to Mailchimp)
Thunderbird is working to strengthen the privacy of the users, not to invade. So no these technologies invade privacy don't use by web marketing is not supported and where possible actively countered.
Maybe you are looking for
-
QUOTA exceeded... even cannot delete
Hello QUOTA exceeded in icloud reminders... tried to make space by deleting completed tasks, but still not the QUOTA EXCEEDED message, so I can not delete the
-
Satellite L50 - B - 1 HM - how to replace the memory module?
Hello I have a Toshiba Satellite L50 B - 1 HM, product number: PSKTAE 072017CE. It has 8 GB of RAM but is expandable to 16 GB. My question is, should I buy a 8 GB memory module? (and I would add up to 16 GB).Or should I buy a 16 GB memory module to c
-
Good afternoon. I use a C library for programming an application in Labview (I use the call library function). The problem is that I need enter a NULL value as an argument within the function. Someone can tell me, how do I create a digital constant N
-
Problem with the drivers after XP installation
Today, I installed Winowds XP Professional Service Pack 3 on a HP 530 laptop. There was no internet, so I found a driver (BCM 43227 WLAN Driver w1wlg02us17.exe Setup) -the only one of all the others that I downloaded and tried. But always in the Devi
-
error dll loading message - ursrom.dll - the specified module could not be found.
Logging in Windows XP, I get a message error ursrom.dll loading. "The specified module is not found." Is there a solution?