VPN Client Login Prompt Timeout too short?
Hello
Client VPN 4.0.3 / IOS 12.3 (2) T4
Is it possible to change the default time-out for the name of username/password prompt? By default, users has only 30 seconds to enter their credentials.
I found IOS command 'login timeout reply' that does exactly what I want, but it seems that this order cannot be applied under lines.
Thanks for your help
> isakmp xauth timeout crypto
will do the trick for you.
Tags: Cisco Security
Similar Questions
-
VPN client idle timeout (need to order)
Hello Experts,
I have the current configuration:
Router Cisco 3700 and a version of the client vpn cisco 4.7
I would like to know what is the command set up on the router so that my vpn clients may be inactive for 1 hour or more without having previously disconnected.
Thank you very much
Randall
Hi Randall,.
You can use the following command to increase the idle-timeout:
cry dynamic-map 1
all security association idle time<60-86400s>
output
* Please rate if this helped.
-Kanishka
60-86400s> -
not having to ssl vpn login prompt
Hi all
This is the configuration for SSL vpn on our ASA 5510. . If we made the reference to the site configuration, we are unable to get the login prompt. could you please check and suggest you do the work of SSL vpn
Configuration
===========
WebVPN
allow outside
back to url-list Test webvpn
import webvpn url-list SSL_Bookmarks disk0: / tmpAsdmImportFile1646955469
delete /noconfirm disk0: / tmpAsdmImportFile1646955469
internal SSL_users group strategy
attributes of Group Policy SSL_users
VPN-tunnel-Protocol webvpn
WebVPN
the value of the URL - list SSL_Bookmarks
type tunnel-group SSL_VPN remote access
attributes global-tunnel-group SSL_VPN
Group Policy - by default-SSL_users
Group-RADIUS authentication server
attributes of Group Policy SSL_users
VPN-tunnel-Protocol svc webvpn
tunnel-group SSL_VPN webvpn-attributes
enable AnyConnect group-alias
WebVPN
tunnel-group-list activate============================
Version
======
ASA-5510-1 # sh ver
Cisco Adaptive Security Appliance Version 8.2 software (1)
Version 6.2 Device Manager (1)Updated Wednesday, 5 May 09 22:45 by manufacturers
System image file is "disk0: / asa821 - k8.bin.
The configuration file to the startup was "startup-config '.ASA-5510-1 up to 57 days 9 hours
Material: ASA5510, 256 MB of RAM, processor Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256 MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024 KBHardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
Start firmware: CN1000-MC-BOOT - 2.00
SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04
0: Ext: Ethernet0/0: the address is 0027.0d38.034e, irq 9
1: Ext: Ethernet0/1: the address is 0027.0d38.034f, irq 9
2: Ext: Ethernet0/2: the address is 0027.0d38.0350, irq 9
3: Ext: Ethernet0/3: the address is 0027.0d38.0351, irq 9
4: Ext: Management0/0: the address is 0027.0d38.0352, irq 11
5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 100
Internal hosts: unlimited
Failover: Active/active
VPN - A: enabled
VPN-3DES-AES: disabled
Security contexts: 2
GTP/GPRS: disabled
SSL VPN peers: 2
The VPN peers total: 250
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect for Linksys phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabledThis platform includes an ASA 5510 Security Plus license.
Serial number: JMX1350L04D
Activation key running: 0xef04c544 0xf4999c16 0xf4c19950 0x85684c50 0x442c3292
Registry configuration is 0x1
Modified configuration of enable_15 to 06:55:11.349 UAE Thursday, November 18, 2010
ASA-5510-1 #.===================
Thanks in adavnce
You can get the activation key for 3des from the license page (it's free):
https://Tools.Cisco.com/swift/licensing/PrivateRegistrationServlet?DemoKeys=Y
(Click on Cisco ASA 3DES/AES license)
It can work with just, however, your browser might not support SOME. The browser asks political there and see if ASA has set up, but I know that a lot of the new browser will not load more, but feel free to try.
-
Routing problem between the VPN Client and the router's Ethernet device
Hello
I have a Cisco 1721 in a test environment.
A net 172.16.0.0/19 simulates the Internet and a net 192.168.1.0/24 simulates the net, the VPN tunnel must go to (intranet).
The net 172.16.0.0 depends on the router 0 FastEthernet, Intranet (VPN) hangs on Ethernet 0.
The configuration was inspired form the sample Configuration
"Configuring the Client VPN Cisco 3.x for Windows to IOS using Local extended authentication"
and the output of the ConfigMaker configuration.
Authentication and logon works. Client receives an IP address from the pool. But there's a routing problem
side of routers. Ping client-side - do not work (the VPN client statistics that count encrypt them packets, but not to decrypt).
Ping the router works too, but decrypt and encrypt customer statistics in VPN packets count progressive
(customer has a correct route and return ICMP packets to the router).
The question now is:
How to route packets between the Tunnel and an Ethernet device (Ethernet 0)?
conf of the router is attached - hope that's not too...
Thanks & cordially
Thomas Schmidt
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- snipp .-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.
!
version 12.2
horodateurs service debug uptime
Log service timestamps uptime
encryption password service
!
!
host name * moderator edit *.
!
enable secret 5 * moderator edit *.
!
!
AAA new-model
AAA authentication login userauthen local
AAA authorization groupauthor LAN
!
! only for the test...
!
username cisco password 0 * moderator edit *.
!
IP subnet zero
!
audit of IP notify Journal
Max-events of po verification IP 100
!
crypto ISAKMP policy 3
3des encryption
preshared authentication
Group 2
!
ISAKMP crypto client configuration group 3000client
key cisco123
pool ippool
!
! We do not want to divide the tunnel
! ACL 108
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
!
map clientmap client to authenticate crypto list userauthen
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
interface Ethernet0
no downtime
Description connected to VPN
IP 192.168.1.1 255.255.255.0
full-duplex
IP access-group 101 in
IP access-group 101 out
KeepAlive 10
No cdp enable
!
interface Ethernet1
no downtime
address 192.168.3.1 IP 255.255.255.0
IP access-group 101 in
IP access-group 101 out
full-duplex
KeepAlive 10
No cdp enable
!
interface FastEthernet0
no downtime
Description connected to the Internet
IP 172.16.12.20 255.255.224.0
automatic speed
KeepAlive 10
No cdp enable
!
! This access group is also only for test cases!
!
no access list 101
access list 101 ip allow a whole
!
local pool IP 192.168.10.1 ippool 192.168.10.10
IP classless
IP route 0.0.0.0 0.0.0.0 172.16.12.20
enable IP pim Bennett
!
Line con 0
exec-timeout 0 0
password 7 * edit from moderator *.
line to 0
line vty 0 4
!
end
^-^-^-^-^-^-^-^-^-^-^-^-^- snapp ^-^-^-^-^-^-^-^-^-^-^-^-^-^-
Thomas,
Can't wait to show something that might be there, but I don't see here. You do not have the card encryption applied to one of the interfaces, perhaps it was not copied. Assuming your description you do it, or should it be, applied to the fa0 and you are connected. Try how you ping? Since the router or a device located on E0? If you ping the router, you will need to do an extended ping of E0 to the ip address of the client has been assigned. If your just ping the router without the extension, you will get sales and decrypts that you declare on the client. Have you tried to ping from the client to interface E0? Your default route on the router is pointing to fa0? You have a next hop to affect? You have several NIC on the client pc? Turn off your other network cards to check that you don't have a problem with routing on the client if you have more than one.
Kurtis Durrett
-
Terminating the VPN client on 871W
Hello
I tried to install EasyVPN on a cisco 871W by SDM. The goal is to finish the VPN client with authentication with an external RADIUS/advertising (on a local subnet). I implemented the IAS on a win2003 Server advertising and checked the accounts.
SDM was missing the 'crypto map' piece of config. After you add this in the CLI it still didn't work. Thus, EasyVPN is not as easy at is sounds...
Could someone with some knowledge of VPN and IPsec and so forth please look at this config? Maybe it gives me an idea of what I did wrong (which, without a doubt, must be the case).
Thank you
Erik
==
AAA new-model
!
AAA rad_eap radius server group
auth-port 1645 10.128.7.5 Server acct-port 1646
!
AAA rad_mac radius server group
!
AAA rad_acct radius server group
!
AAA rad_admin radius server group
!
AAA server Ganymede group + tac_admin
!
AAA rad_pmip radius server group
!
RADIUS server AAA dummy group
!
AAA authentication login default local
AAA authentication login eap_methods group rad_eap
AAA authentication login mac_methods local
AAA authentication login sdm_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ipmobile default group rad_pmip
AAA authorization sdm_vpn_group_ml_1 LAN
AAA accounting network acct_methods
action-type market / stop
Group rad_acct
!
!
!
AAA - the id of the joint session
clock timezone MET 1
clock to DST DST PUTS recurring last Sun Mar 02:00 last Sun Oct 02:00
!
Crypto pki trustpoint TP-self-signed-1278336536
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1278336536
revocation checking no
rsakeypair TP-self-signed-1278336536
!
!
TP-self-signed-1278336536 crypto pki certificate chain
certificate self-signed 01
3082024A 308201B 3 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31323738 33333635 6174652D 3336301E 170 3039 31303237 32313237
32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 32373833 65642D
33363533 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
81008B 56 5902F5DF FCE1A56E 3A63350E 45956514 1767EF73 FEC6CD16 7E982A82
B0AF8546 ABB3D35A B7C3A7E3 3ACCB34A 8B655C97 F103DBD5 9AAEFEFC 37A 02103
4EFC398B 0C8B6BE5 AD3E568E 6CB69F87 CBCA0785 EAED0A28 726F2F0A B0B0453E
32E6B3B7 861F87FA 222197DD 3410D8A9 35939E9B CBF95F20 B8DA6ADE BF460F5C
BF8F0203 010001A 3 72307030 130101 1 FF040530 030101FF 301D 0603 0F060355
551 1104 16301482 12444341 4E495430 302E6361 6E2D6974 2E657530 1F060355
1 230418 30168014 84C9223E 661B2EB4 5BAB0B0E 1BE3A27A 64B3AEB0 301D 0603
551D0E04 16041484 C9111E66 1B2EB45B AB0B0E1B E3A27A64 B3AEB030 0D06092A
010104 05000381 8693B 599 70EC1F1A D2995276 F3E4AF9D 81002F4A 0D 864886F7
17E3583A 46C749F9 38743E6F F5E60478 5B9B5091 E944C689 7BA6DCA2 94D2FBD3
AFDE4500 A0A3644E 603A852D 55ED7A87 93501D5C 1662DAED 3FFFEC5A F1C38ED4
E0787561 BA5C14A3 6D065FCF 7DBDEBB6 9186C2D9 AA253FBF A9E38BC3 342C3AC9
2BEF6821 E4C50277 493AD5B6 2AFE
quit smoking
dot11 syslog
!
IP source-route
!
!
DHCP excluded-address IP 10.128.1.250 10.128.1.254
DHCP excluded-address IP 10.128.150.250 10.128.150.254
DHCP excluded-address IP 10.128.7.0 10.128.7.100
DHCP excluded-address IP 10.128.7.250 10.128.7.254
!
pool IP dhcp VLAN30-COMMENTS
import all
Network 10.128.1.0 255.255.255.0
router by default - 10.128.1.254
10.128.7.5 DNS server
-10.128.7.5 NetBIOS name server
aaa.com domain name
4 rental
!
IP dhcp VLAN20-STAFF pool
import all
Network 10.128.150.0 255.255.255.0
router by default - 10.128.150.254
10.128.7.5 DNS server
-10.128.7.5 NetBIOS name server
aaa.com domain name
4 rental
!
IP dhcp SERVERS VLAN10 pool
import all
Network 10.128.7.0 255.255.255.0
router by default - 10.128.7.254
10.128.7.5 DNS server
-10.128.7.5 NetBIOS name server
aaa.com domain name
4 rental
!
!
IP cef
no ip domain search
IP domain name aaa.com
inspect the tcp IP MYFW name
inspect the IP udp MYFW name
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
VPDN enable
!
!
!
username privilege 15 secret 5 xxxx xxxx
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group vpn
key xxxx
pool SDM_POOL_1
netmask 255.255.255.0
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
crypto dynamic-map SDM_DYNMAP_1 1
market arriere-route
!
!
card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
!
Crypto ctcp port 10000
Archives
The config log
hidekeys
!
!
!
Bridge IRB
!
!
interface Loopback0
10.128.201.1 the IP 255.255.255.255
map SDM_CMAP_1 crypto
!
interface FastEthernet0
switchport access vlan 10
!
interface FastEthernet1
switchport access vlan 20
!
interface FastEthernet2
switchport access vlan 10
!
interface FastEthernet3
switchport access vlan 30
!
interface FastEthernet4
no ip address
Speed 100
full-duplex
PPPoE enable global group
PPPoE-client dial-pool-number 1
No cdp enable
!
interface Dot11Radio0
no ip address
Shutdown
No dot11 extensions aironet
!
interface Vlan1
address IP AAA. BBB. CCC.177 255.255.255.240
no ip redirection
no ip proxy-arp
NAT outside IP
no ip virtual-reassembly
No autostate
Hold-queue 100 on
!
interface Vlan10
SERVER description
no ip address
IP nat inside
no ip virtual-reassembly
No autostate
Bridge-group 10
Bridge-group of 10 disabled spanning
!
interface Vlan20
Description of the STAFF
no ip address
IP nat inside
no ip virtual-reassembly
No autostate
Bridge-group 20
Bridge-group 20 covering people with reduced mobility
!
Vlan30 interface
Description COMMENTS
no ip address
IP nat inside
no ip virtual-reassembly
No autostate
Bridge-group 30
Bridge-group 30 covering people with reduced mobility
!
interface Dialer1
MTU 1492
IP unnumbered Vlan1
no ip redirection
no ip proxy-arp
NAT outside IP
inspect the MYFW over IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
Dialer-Group 1
PPP authentication pap callin
PPP pap sent-name of user password 7 xxxx xxxxx
!
interface BVI10
Description the server network bridge
IP 10.128.7.254 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface BVI20
Description personal network bridge
IP 10.128.150.254 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface BVI30
Bridge network invited description
IP 10.128.1.254 255.255.255.0
IP access-group Guest-ACL in
IP nat inside
IP virtual-reassembly
!
pool of local SDM_POOL_1 192.168.2.1 IP 192.168.2.100
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 Dialer1
IP http server
access-class 2 IP http
local IP http authentication
IP http secure server
IP http secure ciphersuite 3des-ede-cbc-sha
IP http secure-client-auth
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
overload of IP nat inside source list 101 interface Vlan1
IP nat inside source static tcp 10.128.7.1 25 AAA. BBB. Expandable 25 CCC.178
IP nat inside source static tcp 10.128.7.1 80 AAA. BBB. CCC.178 extensible 80
IP nat inside source static tcp 10.128.7.1 443 AAA. BBB. CCC.178 extensible 443
IP nat inside source static tcp 10.128.7.1 8333 AAA. BBB. CCC.178 extensible 8333
IP nat inside source static tcp 10.128.7.2 25 AAA. BBB. Expandable 25 CCC.179
IP nat inside source static tcp 10.128.7.2 80 AAA. BBB. CCC.179 extensible 80
IP nat inside source static tcp 10.128.7.2 443 AAA. BBB. CCC.179 extensible 443
IP nat inside source static tcp 10.128.7.2 8333 AAA. BBB. CCC.179 extensible 8333
IP nat inside source static tcp 10.128.7.3 25 AAA. BBB. Expandable 25 CCC.180
IP nat inside source static tcp 10.128.7.3 80 AAA. BBB. CCC.180 extensible 80
IP nat inside source static tcp 10.128.7.3 443 AAA. BBB. CCC.180 extensible 443
IP nat inside source static tcp 10.128.7.3 8333 AAA. BBB. CCC.180 extensible 8333
IP nat inside source static tcp 10.128.7.4 25 AAA. BBB. Expandable 25 CCC.181
IP nat inside source static tcp 10.128.7.4 80 AAA. BBB. CCC.181 extensible 80
IP nat inside source static tcp 10.128.7.4 443 AAA. BBB. CCC.181 extensible 443
IP nat inside source static tcp 10.128.7.4 8333 AAA. BBB. CCC.181 extensible 8333
IP nat inside source static tcp 10.128.7.5 25 AAA. BBB. Expandable 25 CCC.182
IP nat inside source static tcp 10.128.7.5 80 AAA. BBB. CCC.182 extensible 80
IP nat inside source static tcp 10.128.7.5 443 AAA. BBB. CCC.182 extensible 443
IP nat inside source static tcp 10.128.7.5 8333 AAA. BBB. CCC.182 extensible 8333
IP nat inside source static tcp 10.128.7.6 25 AAA. BBB. Expandable 25 CCC.183
IP nat inside source static tcp 10.128.7.6 80 AAA. BBB. CCC.183 extensible 80
IP nat inside source static tcp 10.128.7.6 443 AAA. BBB. CCC.183 extensible 443
IP nat inside source static tcp 10.128.7.6 8333 AAA. BBB. CCC.183 extensible 8333
IP nat inside source static tcp 10.128.7.7 25 AAA. BBB. Expandable 25 CCC.184
IP nat inside source static tcp 10.128.7.7 80 AAA. BBB. CCC.184 extensible 80
IP nat inside source static tcp 10.128.7.7 443 AAA. BBB. CCC.184 extensible 443
IP nat inside source static tcp 10.128.7.7 8333 AAA. BBB. CCC.184 extensible 8333
IP nat inside source static tcp 10.128.7.8 25 AAA. BBB. Expandable 25 CCC.185
IP nat inside source static tcp 10.128.7.8 80 AAA. BBB. CCC.185 extensible 80
IP nat inside source static tcp 10.128.7.8 443 AAA. BBB. CCC.185 extensible 443
IP nat inside source static tcp 10.128.7.8 8333 AAA. BBB. CCC.185 extensible 8333
IP nat inside source static tcp 10.128.7.9 25 AAA. BBB. Expandable 25 CCC.186
IP nat inside source static tcp 10.128.7.9 80 AAA. BBB. CCC.186 extensible 80
IP nat inside source static tcp 10.128.7.9 443 AAA. BBB. CCC.186 extensible 443
IP nat inside source static tcp 10.128.7.9 8333 AAA. BBB. CCC.186 extensible 8333
IP nat inside source static tcp 10.128.7.10 25 AAA. BBB. Expandable 25 CCC.187
IP nat inside source static tcp 10.128.7.10 80 AAA. BBB. CCC.187 extensible 80
IP nat inside source static tcp 10.128.7.10 443 AAA. BBB. CCC.187 extensible 443
IP nat inside source static tcp 10.128.7.10 8333 AAA. BBB. CCC.187 extensible 8333
IP nat inside source static tcp 10.128.7.11 25 AAA. BBB. Expandable 25 CCC.188
IP nat inside source static tcp 10.128.7.11 80 AAA. BBB. CCC.188 extensible 80
IP nat inside source static tcp 10.128.7.11 443 AAA. BBB. CCC.188 extensible 443
IP nat inside source static tcp 10.128.7.11 8333 AAA. BBB. CCC.188 extensible 8333
IP nat inside source static tcp 10.128.7.12 25 AAA. BBB. Expandable 25 CCC.189
IP nat inside source static tcp 10.128.7.12 80 AAA. BBB. CCC.189 extensible 80
IP nat inside source static tcp 10.128.7.12 443 AAA. BBB. CCC.189 extensible 443
IP nat inside source static tcp 10.128.7.12 8333 AAA. BBB. CCC.189 extensible 8333
!
Guest-ACL extended IP access list
deny ip any 10.128.7.0 0.0.0.255
deny ip any 10.128.150.0 0.0.0.255
allow an ip
IP Internet traffic inbound-ACL extended access list
allow udp any eq bootps any eq bootpc
permit any any icmp echo
permit any any icmp echo response
permit icmp any any traceroute
allow a gre
allow an esp
!
access-list 1 permit 10.128.7.0 0.0.0.255
access-list 1 permit 10.128.150.0 0.0.0.255
access-list 1 permit 10.128.1.0 0.0.0.255
access-list 2 allow 10.0.0.0 0.255.255.255
access-list 2 refuse any
access-list 101 permit ip 10.128.7.0 0.0.0.255 any
access-list 101 permit ip 10.128.150.0 0.0.0.255 any
access-list 101 permit ip 10.128.1.0 0.0.0.255 any
Dialer-list 1 ip Protocol 1
!
!
!
!
format of server RADIUS attribute 32 include-in-access-req hour
RADIUS-server host 10.128.7.5 auth-port 1645 acct-port 1646 borders 7 xxxxx
RADIUS vsa server send accounting
!
control plan
!
IP route 10 bridge
IP road bridge 20
IP road bridge 30
Banner motd ^.
Unauthorized access prohibited. *
All access attempts are logged! ***************^
!
Line con 0
password 7 xxxx
no activation of the modem
line to 0
line vty 0 4
access-class 2
privilege level 15
transport input telnet ssh
!
max-task-time 5000 Planner
AAA.BBB.CCC.ddd NTP server
endErik,
The address pool you are talking about is to assign to the customer or the public router interface? If you want to set up your vpn client software point a full domain name instead of an IP address that you can do it too long you can ensure the use of the name is resolved by a DNS SERVER.
The range of addresses that you can be asigned to your Dialer interface will depend on your ISP.
-Butterfly
-
Why my VPN clients cannot access network drives and resources?
I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!
: Saved
:
ASA Version 8.2 (5)
!
ciscoasa hostname
Cisco domain name
activate the password xxxxxxxxxxxxx
passwd xxxxxxxxxxxxxxxxx
names of
name 68.191.xxx.xxx outdoors
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.201.200 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address outside 255.255.255.0
!
passive FTP mode
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
192.168.201.1 server name
Cisco domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group network obj - 192.168.201.0
FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0
NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0
FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any
Extended access list-NAT-FREE enabled a whole icmp
allow any scope to an entire ip access list
allow any scope to the object-group TCPUDP an entire access list
allow any scope to an entire icmp access list
inside_access_in of access allowed any ip an extended list
inside_access_in list extended access allow TCPUDP of object-group a
inside_access_in list extended access permit icmp any one
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access allow TCPUDP of object-group a
outside_access_in list extended access permit icmp any one
Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0
access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0
inside_nat0_outbound list extended access permit icmp any one
inside_nat0_outbound_1 of access allowed any ip an extended list
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 192.168.201.0 255.255.255.0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1
Route inside 0.0.0.0 255.255.255.255 outdoor 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.201.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
Keypairs xxx
Proxy-loc-transmitter
Configure CRL
XXXXXXXXXXXXXXXXXXXXXXXX
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP allow inside
crypto ISAKMP policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
allow inside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
Cisco by default field value
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
WebVPN
SVC request enable
internal KunduVPN group strategy
attributes of Group Policy KunduVPN
WINS server no
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Cisco by default field value
username xxxx
username xxxxx
VPN-group-policy DfltGrpPolicy
attributes global-tunnel-group DefaultRAGroup
address VPNIP pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
type tunnel-group KunduVPN remote access
attributes global-tunnel-group KunduVPN
address (inside) VPNIP pool
address pool KunduVPN
authentication-server-group (inside) LOCAL
Group Policy - by default-KunduVPN
tunnel-group KunduVPN webvpn-attributes
enable KunduVPN group-alias
allow group-url https://68.191.xxx.xxx/KunduVPN
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc
: end
don't allow no asdm history
Hello
What is the IP address of the hosts/servers LAN Gateway?
If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.
For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.
- Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
- Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
- Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
- Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
- Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP
So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)
I would like to know if the installation is as described above.
-Jouni
-
Cisco VPN Client cannot ping from LAN internal IP
Hello
I apologize in advance for my lack of knowledge about it, but I got a version of the software running ASA 5510 7.2 (2) and has been invited to set up a site with a client, I managed to get this configured and everything works fine. In addition, I created a group of tunnel ipsec-ra for users to connect to a particular server 192.168.10.100/24 remote, even if the connection is made successfully, I can not ping any IP on the LAN 192.168.10.0/24 located behind the ASA and when I ping inside the interface on the ASA it returns the public IP address of the external interface.
If someone out there could give me a little push in the right direction, it would be much appreciated! This is the current configuration of the device.
Thanks in advance.
: Saved
:
ASA Version 7.2 (2)
!
hostname ciscoasa5510
domain.local domain name
activate the password. 123456789 / encrypted
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group ISP
12.34.56.789 255.255.255.255 IP address pppoe setroute
!
interface Ethernet0/1
nameif inside
security-level 100
IP 192.168.10.1 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
passwd encrypted 123456789
passive FTP mode
clock timezone GMT/UTC 0
summer time clock GMT/BDT recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS server-group DefaultDNS
domain.local domain name
permit outside_20_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 host 10.16.2.124
permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 host 10.16.2.124
access-list Split_Tunnel_List note the network of the company behind the ASA
Split_Tunnel_List list standard access allowed 192.168.10.0 255.255.255.0
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
IP local pool domain_vpn_pool 192.168.11.1 - 192.168.11.254 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 522.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 12.34.56.789 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
internal domain_vpn group policy
attributes of the strategy of group domain_vpn
value of 212.23.3.100 DNS server 212.23.6.100
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Split_Tunnel_List
username domain_ra_vpn password 123456789 encrypted
username domain_ra_vpn attributes
VPN-group-policy domain_vpn
encrypted utilisateur.123456789 password username
encrypted utilisateur.123456789 password username
privilege of username user password encrypted passe.123456789 15
encrypted utilisateur.123456789 password username
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.10.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map 20 set pfs
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
card crypto outside_map 20 match address outside_20_cryptomap
peer set card crypto outside_map 20 987.65.43.21
outside_map crypto 20 card value transform-set ESP-3DES-SHA
3600 seconds, duration of life card crypto outside_map 20 set - the security association
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
tunnel-group 987.65.43.21 type ipsec-l2l
IPSec-attributes tunnel-group 987.65.43.21
pre-shared-key *.
tunnel-group domain_vpn type ipsec-ra
tunnel-group domain_vpn General-attributes
address domain_vpn_pool pool
Group Policy - by default-domain_vpn
domain_vpn group of tunnel ipsec-attributes
pre-shared-key *.
Telnet 192.168.10.0 255.255.255.0 inside
Telnet timeout 5
Console timeout 0
VPDN group ISP request dialout pppoe
VPDN group ISP localname [email protected] / * /
VPDN group ISP ppp authentication chap
VPDN username [email protected] / * / password *.
dhcpd dns 212.23.3.100 212.23.6.100
dhcpd lease 691200
dhcpd ping_timeout 500
domain.local domain dhcpd
!
dhcpd address 192.168.10.10 - 192.168.10.200 inside
dhcpd allow inside
!
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:1234567890987654321
: end
Hello
Seems to me that you are atleast lack the NAT0 configuration for your VPN Client connection.
This configuration is intended to allow the VPN Client to communicate with the local network with their original IP addresses. Although the main reason that this is necessary is to avoid this traffic to the normal rule of dynamic PAT passing this traffic and that traffic is falling for the corresponding time.
You can add an ACL rule to the existing ACL NAT0, you have above and the NAT configuration should go next
Add this
permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
Hope this helps
Let me know how it goes
-Jouni
-
VPN site to site &; outdoor on ASA 5520 VPN client
Hi, I'm jonathan rivero.
I have an ASA 5520 Version 8.0 (2), I configured the site-to-site VPN and works very well, in the other device, I configured the VPN Client for remote users and works very well, but I try to cofigure 2 VPNs on ASA 5520 on the same outside interface and I have the line "outside_map interface card crypto outdoors (for VPN client). , but when I set up the "crypto map VPNL2L outside interface, it replaces the command', and so I can have only a single connection.
the executed show.
ASA1 (config) # sh run
: Saved
:
ASA Version 8.0 (2)
!
hostname ASA1
activate 7esAUjZmKQSFDCZX encrypted password
names of
!
interface Ethernet0/0
nameif inside
security-level 100
address 172.16.3.2 IP 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 200.20.20.1 255.255.255.0
!
interface Ethernet0/1.1
VLAN 1
nameif outside1
security-level 0
no ip address
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/5
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
object-group, net-LAN
object-network 172.16.0.0 255.255.255.0
object-network 172.16.1.0 255.255.255.0
object-network 172.16.2.0 255.255.255.0
object-network 172.16.3.0 255.255.255.0
object-group, NET / remote
object-network 172.16.100.0 255.255.255.0
object-network 172.16.101.0 255.255.255.0
object-network 172.16.102.0 255.255.255.0
object-network 172.16.103.0 255.255.255.0
object-group network net-poolvpn
object-network 192.168.11.0 255.255.255.0
access list outside nat extended permit ip net local group object all
access-list extended sheep allowed ip local object-group net object-group net / remote
access-list extended sheep allowed ip local object-group net net poolvpn object-group
access-list splittun-vpngroup1 extended permitted ip local object-group net net poolvpn object-group
pager lines 24
Within 1500 MTU
Outside 1500 MTU
outside1 MTU 1500
IP local pool ippool 192.168.11.1 - 192.168.11.100 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 100 burst-size 10
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 access list outside nat
Route outside 0.0.0.0 0.0.0.0 200.20.20.1 1
Route inside 172.16.0.0 255.255.255.0 172.16.3.2 1
Route inside 172.16.1.0 255.255.255.0 172.16.3.2 1
Route inside 172.16.2.0 255.255.255.0 172.16.3.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
!
internal vpngroup1 group policy
attributes of the strategy of group vpngroup1
banner value +++ welcome to Cisco Systems 7.0. +++
value of 192.168.0.1 DNS server 192.168.1.1
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value splittun-vpngroup1
value by default-ad domain - domain.local
Split-dns value ad - domain.local
the address value ippool pools
username password asa1 VRTlLlJ48/PoDKjS encrypted privilege 15
tunnel-group 200.30.30.1 type ipsec-l2l
IPSec-attributes tunnel-group 200.30.30.1
pre-shared-key *.
type tunnel-group vpngroup1 remote access
tunnel-group vpngroup1 General-attributes
ippool address pool
Group Policy - by default-vpngroup1
vpngroup1 group of tunnel ipsec-attributes
pre-shared-key *.
context of prompt hostname
Cryptochecksum:00000000000000000000000000000000
: end
ASA2 (config) #sh run
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
VPNL2L interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400tunnel-group 200.30.30.1 type ipsec-l2l
IPSec-attributes tunnel-group 200.30.30.1
pre-shared key ciscomy topology:
I try with the following links, but did not work
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080912cfd.shtml
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml
Best regards...
"" I thing both the force of the SAA with the new road outside, why is that? ".
without the road ASA pushes traffic inward, by default.
In any case, this must have been a learning experience.
Hopefully, this has been no help.
Please rate, all the helful post.
Thank you
Rizwan Muhammed.
-
I'm trying to connect to my router Cisco VPN Client 4.8 of Pentecost Cisco1811 Pentecost rsa - sig (certificate). On the Cisco VPN Client I resive username request I spend. When I insert them on the 1811 I resive this message on the console
% CRYPTO-6-VPN_TUNNEL_STATUS: Group: does not exist
My ios config is:
AAA new-model
!
!
local VPNUSER AAA authentication login
local AAA VPNUSER authorization network
!
AAA - the id of the joint session
!
resources policy
!
!
!
IP cef
No dhcp use connected vrf ip
DHCP excluded-address IP 192.168.10.1
!
SDM-IP dhcp pool pool
import all
network 192.168.10.0 255.255.255.0
default router 192.168.10.1
Rental 2 0
!
!
no ip domain search
"yourdomain.com" of the IP domain name
!
! Crypto pki token by default user pins *.
Crypto pki token removal timeout 30 default
!
Crypto pki trustpoint TP-self-signed-2095781077
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2095781077
revocation checking no
rsakeypair TP-self-signed-2095781077
!
Crypto pki trustpoint CA_Server
Terminal registration
Serial number no
full domain name no
IP address no
password
name of the object O = 5100, OU = customs, CN = ROUTER1
revocation checking no
rsakeypair SDM-RSAKey-1180596453000
!
!
TP-self-signed-2095781077 crypto pki certificate chain
string CA_Server crypto pki certificates
!
crypto ISAKMP policy 10
BA 3des
Group 2
ISAKMP crypto identity dn
!
ISAKMP crypto client configuration group guest_group
DNS 10.1.1.3
pool vpnpool
!
!
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
!
Crypto-map dynamic dynmap 10
game of transformation-ESP-3DES-MD5
!
!
list of authentication of card crypto client vpn_map VPNUSER
card crypto vpn_map VPNUSER isakmp authorization list
client configuration address card crypto vpn_map throw
client configuration address card crypto vpn_map answer
vpn_map 10 card crypto ipsec-isakmp dynamic dynmap
!
What can I do
What is the OU on the certificate you have for the customer?
What is guest_group or something else?
Thank you
Gilbert
-
Windows - Internet access, no split Tunnel L2TP VPN Clients does not
Greetings!
I have four ASA 5505 that I configured with 4 site to site VPN tunnels (works perfectly) to connect to our company facilities 4. The ASA is also configured with remote access L2TP/IPsec so that a specific group of users of portable computers can connect to and access to all facilities. It also works very well except for one important exception - my split tunnel setting doesn't seem to work, because I can't connect to the Internet outside the VPN resources.
I accept the inherent risk of allowing tunnels to split from a security point of view since I take the necessary steps to secure the systems used for remote access. I would appreciate any feedback on how to get the job of split tunnel.
Here is the configuration:
: Saved
:
ASA Version 1.0000 11
!
SGC hostname
domain somewhere.com
names of
COMMENTS COMMENTS LAN 192.168.2.0 name description
name 75.185.129.13 description of SGC - external INTERNAL ASA
name 172.22.0.0 description of SITE1-LAN Ohio management network
description of SITE2-LAN name 172.23.0.0 Lake Club Network
name 172.24.0.0 description of training3-LAN network Southwood
description of training3 - ASA 123.234.8.124 ASA Southwoods name
INTERNAL name 192.168.10.0 network Local INTERNAL description
description of name 192.168.11.0 INTERNAL - VPN VPN INTERNAL Clients
description of Apollo name 192.168.10.4 INTERNAL domain controller
description of DHD name 192.168.10.2 Access Point #1
description of GDO name 192.168.10.3 Access Point #2
description of Odyssey name 192.168.10.5 INTERNAL Test Server
CMS internal description INTERNAL ASA name 192.168.10.1
name 123.234.8.60 description of SITE1 - ASA ASA management Ohio
description of SITE2 - ASA 123.234.8.189 Lake Club ASA name
description of training3-VOICE name Southwood Voice Network 10.1.0.0
name 172.25.0.0 description of training3-WIFI wireless Southwood
!
interface Vlan1
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan2
nameif INSIDE
security-level 100
255.255.255.0 SGC-internal IP address
!
interface Vlan3
nameif COMMENTS
security-level 50
IP 192.168.2.1 255.255.255.0
!
interface Ethernet0/0
Time Warner Cable description
!
interface Ethernet0/1
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/2
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/3
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/4
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/5
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/6
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/7
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
boot system Disk0: / asa821-11 - k8.bin
Disk0: / config.txt boot configuration
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS domain-lookup outside
INTERNAL DNS domain-lookup
DNS domain-lookup GUEST
DNS server-group DefaultDNS
Name-Server 4.2.2.2
domain somewhere.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
DM_INLINE_TCP_1 tcp service object-group
EQ port 3389 object
port-object eq www
EQ object of the https port
EQ smtp port object
the DM_INLINE_NETWORK_1 object-group network
network-object SITE1-LAN 255.255.0.0
network-object SITE2-LAN 255.255.0.0
network-object training3-LAN 255.255.0.0
object-group training3-GLOBAL network
Southwood description Global Network
network-object training3-LAN 255.255.0.0
network-object training3-VOICE 255.255.0.0
network-object training3-WIFI 255.255.0.0
DM_INLINE_TCP_2 tcp service object-group
EQ port 5900 object
EQ object Port 5901
object-group network INTERNAL GLOBAL
Description Global INTERNAL Network
network-object INTERNAL 255.255.255.0
network-object INTERNALLY-VPN 255.255.255.0
access-list outside_access note Pings allow
outside_access list extended access permit icmp any CMS-external host
access-list outside_access note that VNC for Camille
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_2
access-list outside_access note INTERNAL Services
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_1
DefaultRAGroup_splitTunnelAcl list standard access allowed INTERNAL 255.255.255.0
access-list sheep extended ip INTERNAL 255.255.255.0 allow INTERNAL VPN 255.255.255.0
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE1 extended permit ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list INTERNAL-to-training3 extended permitted ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE2 extended permit ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
no pager
Enable logging
exploitation forest asdm warnings
Debugging trace record
Outside 1500 MTU
MTU 1500 INTERNAL
MTU 1500 COMMENTS
192.168.11.1 mask - local 192.168.11.25 pool IN-HOUSE VPN IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 623.bin
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
(INTERNAL) NAT 0 access-list sheep
NAT (INTERNAL) 1 0.0.0.0 0.0.0.0
NAT (GUEST) 1 0.0.0.0 0.0.0.0
5900 5900 Camille netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
3389 3389 Apollo netmask 255.255.255.255 interface static tcp (INDOOR, outdoor)
public static tcp (INDOOR, outdoor) interface www Apollo www netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface https Apollo https netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface smtp smtp Apollo netmask 255.255.255.255
5901 puppy 5901 netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
Access-group outside_access in interface outside
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server Apollo
Apollo (INTERNAL) AAA-server Apollo
Timeout 5
key *.
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
Enable http server
http 0.0.0.0 0.0.0.0 INTERNAL
http 0.0.0.0 0.0.0.0 COMMENTS
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA TRANS_ESP_3DES_SHA
correspondence address 1 card crypto outside_map INTERNAL SITE1
card crypto outside_map 1 set of peer SITE1 - ASA
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
address for correspondence card crypto outside_map 2 INTERNAL training3
outside_map 2 peer training3 - ASA crypto card game
card crypto outside_map 2 game of transformation-ESP-3DES-SHA
address for correspondence outside_map 3 card crypto INTERNAL SITE2
game card crypto outside_map 3 peers SITE2 - ASA
card crypto outside_map 3 game of transformation-ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
delimiter group @.
Telnet training3 - ASA 255.255.255.255 outside
Telnet SITE2 - ASA 255.255.255.255 outside
Telnet SITE1 - ASA 255.255.255.255 outside
Telnet 0.0.0.0 0.0.0.0 INTERNAL
Telnet 0.0.0.0 0.0.0.0 COMMENTS
Telnet timeout 60
SSH enable ibou
SSH training3 - ASA 255.255.255.255 outside
SSH SITE2 - ASA 255.255.255.255 outside
SSH SITE1 - ASA 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 INTERNAL
SSH 0.0.0.0 0.0.0.0 COMMENTS
SSH timeout 60
Console timeout 0
access to the INTERNAL administration
Hello to tunnel L2TP 100
interface ID client DHCP-client to the outside
dhcpd dns 4.2.2.1 4.2.2.2
dhcpd ping_timeout 750
dhcpd outside auto_config
!
address INTERNAL 192.168.10.100 dhcpd - 192.168.10.200
dhcpd Apollo Odyssey interface INTERNAL dns
dhcpd somewhere.com domain INTERNAL interface
interface of dhcpd option 150 ip 10.1.1.40 INTERNAL
enable dhcpd INTERNAL
!
dhcpd address 192.168.2.100 - 192.168.2.200 COMMENTS
dhcpd dns 4.2.2.1 4.2.2.2 interface COMMENTS
enable dhcpd COMMENTS
!a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 192.43.244.18 prefer external source
WebVPN
allow outside
CSD image disk0:/securedesktop-asa-3.4.2048.pkg
SVC disk0:/sslclient-win-1.1.4.179.pkg 1 image
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 2 image
enable SVC
Group Policy DefaultRAGroup INTERNAL
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
Group Policy DefaultWEBVPNGroup INTERNAL
attributes of Group Policy DefaultWEBVPNGroup
VPN-tunnel-Protocol webvpn
Group Policy DefaultL2LGroup INTERNAL
attributes of Group Policy DefaultL2LGroup
Protocol-tunnel-VPN IPSec l2tp ipsec
Group Policy DefaultACVPNGroup INTERNAL
attributes of Group Policy DefaultACVPNGroup
VPN-tunnel-Protocol svc
attributes of Group Policy DfltGrpPolicy
value of 192.168.10.4 DNS Server 4.2.2.2
VPN - 25 simultaneous connections
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
the value INTERNAL VPN address pools
chip-removal-disconnect disable card
WebVPN
SVC keepalive no
client of dpd-interval SVC no
dpd-interval SVC bridge no
value of customization DfltCustomization
attributes global-tunnel-group DefaultRAGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
Disable ISAKMP keepalive
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
attributes global-tunnel-group DefaultWEBVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultWEBVPNGroup
tunnel-group 123.234.8.60 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.60
pre-shared-key *.
tunnel-group 123.234.8.124 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.124
pre-shared-key *.
tunnel-group 123.234.8.189 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.189
pre-shared-key *.
type tunnel-group DefaultACVPNGroup remote access
attributes global-tunnel-group DefaultACVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultACVPNGroup
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the http
inspect the they
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:423c807c0d63cb3e9aeceda977053f84
: end
ASDM image disk0: / asdm - 623.bin
ASDM location Camille 255.255.255.255 INTERNAL
ASDM location INTERNAL CGT-external 255.255.255.255
ASDM location INTERNAL SITE1-LAN 255.255.0.0
ASDM location INTERNAL SITE2-LAN 255.255.0.0
ASDM location INTERNAL training3-LAN 255.255.0.0
ASDM location INTERNAL training3 - ASA 255.255.255.255
ASDM location INTERNAL GDO 255.255.255.255
ASDM location INTERNAL SITE1 - ASA 255.255.255.255
ASDM location INTERNAL SITE2 - ASA 255.255.255.255
ASDM location INTERNAL training3-VOICE 255.255.0.0
ASDM location puppy 255.255.255.255 INTERNAL
enable ASDM historyI should also mention that my test clients are a combination of Windows XP, Windows 7, and Windows Mobile. Other that in specifying the preshared key and forcing L2TP/IPsec on the client side, the VPN settings on clients are the default settings with the help of MS-CHAP/MS-CHAPv2.
You must configure * intercept-dhcp enable * in your group strategy:
attributes of Group Policy DefaultRAGroup
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.comIntercept-dhcp enable
-Latptop VPN clients (which I assume are on windows computers) is also the * use on remote network default gateway * box unchecked. It is located on the Advanced tab of VPN client TCP/IP properties. Select Client VPN > properties > Networking > TCP/IP Internet Protocol > properties > advanced and uncheck the box.
Alex
-
Please help router and vpn client
Hi all
I want to make a vpn between my PC (with version 4.8.02.0010 of the VPN Client) and a remote router (Cisco 2811) version of the software IOS 12.4 (9) T7 and the following configuration
AAA new-model
!
local VPNCLIENT from AAA authentication login.
local AAA VPNGROUP authorization network
Hello test user name password
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group 3000client
key cisco123
DNS 62.42.230.24
domain cisco.com
pool ippool
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
transformation-RIGHT game
!
map clientmap client authentication list of crypto list
crypto isakmp authorization list grupo clientmap map
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
interface FastEthernet0/0
DHCP IP address
NAT outside IP
IP virtual-reassembly
load-interval 30
automatic duplex
automatic speed
clientmap card crypto
!
interface FastEthernet0/0/0
!
interface FastEthernet0/0/1
!
interface FastEthernet0/0/2
!
interface FastEthernet0/0/3
!
interface Vlan1
192.168.4.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
load-interval 30
!
IP local pool ippool 192.168.4.100 192.168.4.200
no ip classless
IP route 0.0.0.0 0.0.0.0 62.43.195.100
!
IP http server
local IP http authentication
no ip http secure server
IP http timeout policy inactive 600 life 86400 request 10000
overload of IP nat inside source list 102 interface FastEthernet0/0
access-list 102 permit ip 192.168.4.0 0.0.0.255 any
!
Line con 0
line to 0
line vty 0 4
privilege level 15
transport telnet entry
line vty 5 15
privilege level 15
transport telnet entry
!
When I connect to the public IP address of the router, that everything is fine and status is connected. But I do not have connectivity to the internet and I can only ping 192.168.4.1, but no other IP address of this beach.
I would be grateful any sort of kelp.
Thank you
You must make sure that your internal traffic goes to the VPN client is NOT be NATT would be.
You need to re - write acl 102 to something like: -.
access-list 102 deny ip 192.168.4.0 0.0.0.255 192.168.4.0 0.0.0.255
access-list 102 permit ip 192.168.4.0 0.0.0.255 any
HTH >
-
Routing issue of Cisco VPN Client ASA
Hi, I use a Barracuda NG for firewalls and I would use a Cisco ASA 5505 for VPN Client connections. But I have the problem that I can't get a connection to the VPN PC connected to the internal network. But I can reach the VPN connected PC from the inside. Here is a diagram of my network:
Here the IP Configuration and the routing of the Barracuda firewall table:
I have a route on the Barracuda NG to the 10.10.10.0/24 network VPN Client on eth0.
The 192.168.1.0/24 LAN I ping the Client comes with Client VPN 10.10.10.11 as it should. But I can't ping or access network resources in the local network for AnyConnected customer's PC that connected through the VPN.
Here is the config Cisco ASA:
: Saved : : Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz : ASA Version 9.2(2) ! hostname leela names ip local pool VPN-Pool 10.10.10.10-10.10.10.200 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 switchport access vlan 5 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Vlan5 nameif dmz security-level 50 ip address 172.16.0.250 255.255.255.0 ! ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server 192.168.1.10 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network VPN-Pool subnet 10.10.10.0 255.255.255.0 description VPN-Pool object network NETWORK_OBJ_10.10.10.0_24 subnet 10.10.10.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip object VPN-Pool any access-list dmz_access_in extended permit ip any any access-list global_access extended permit ip any any access-list outside_access_in extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (inside,dmz) source static any any destination static NETWORK_OBJ_10.10.10.0_24 NETWORK_OBJ_10.10.10.0_24 no-proxy-arp route-lookup inactive access-group inside_access_in in interface inside access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz access-group global_access global route dmz 0.0.0.0 0.0.0.0 172.16.0.254 1 route inside 0.0.0.0 0.0.0.0 192.168.1.254 tunneled timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy server-type microsoft user-identity default-domain LOCAL aaa authentication enable console LDAP_SRV_GRP LOCAL aaa authentication http console LDAP_SRV_GRP LOCAL aaa authentication ssh console LDAP_SRV_GRP LOCAL aaa authentication serial console LOCAL http server enable 444 http 192.168.1.0 255.255.255.0 inside snmp-server location Vienna crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto map dmz_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map dmz_map interface dmz crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=leela proxy-ldc-issuer crl configure crypto ca trustpoint ASDM_TrustPoint1 enrollment terminal crl configure crypto ca trustpool policy crypto ca certificate chain ASDM_TrustPoint0 quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable dmz client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 no ssh stricthostkeycheck ssh 192.168.1.0 255.255.255.0 inside ssh timeout 30 ssh key-exchange group dh-group1-sha1 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.254-192.168.1.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept dynamic-filter updater-client enable dynamic-filter use-database ntp server 192.168.1.10 source inside ssl trust-point ASDM_TrustPoint0 dmz ssl trust-point ASDM_TrustPoint0 inside webvpn enable dmz no anyconnect-essentials anyconnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 1 anyconnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 2 anyconnect image disk0:/anyconnect-linux-3.1.05170-k9.pkg 3 anyconnect image disk0:/anyconnect-linux-64-3.1.05170-k9.pkg 4 anyconnect profiles AnyConnect_client_profile disk0:/AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy DfltGrpPolicy attributes default-domain value group-policy GroupPolicy_AnyConnect internal group-policy GroupPolicy_AnyConnect attributes wins-server none dns-server value 192.168.1.10 vpn-tunnel-protocol ikev2 ssl-client webvpn anyconnect profiles value AnyConnect_client_profile type user group-policy portal internal group-policy portal attributes vpn-tunnel-protocol ssl-clientless webvpn url-list none username tunnel-group AnyConnect type remote-access tunnel-group AnyConnect general-attributes address-pool VPN-Pool authentication-server-group LDAP_SRV_GRP default-group-policy GroupPolicy_AnyConnect tunnel-group AnyConnect webvpn-attributes group-alias AnyConnect enable tunnel-group Portal type remote-access tunnel-group Portal general-attributes authentication-server-group LDAP_SRV_GRP default-group-policy portal tunnel-group Portal webvpn-attributes group-alias portal enable! ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 ! prompt hostname context no call-home reporting anonymous hpm topN enable : end no asdm history enable
Can someone please help me solve this problem?
When I tried to solve this I didn't choose which interface the Packet Tracer?
The interface inside or DMZ interface? Inside, he says it will not work with the dmz but the error did not help me
Anyone here knows why it does not work?
Hello
Inside LAN is directly connected to the right firewall VPN... then I don't think you have to have the itinerary tunnele... can you try to remove the road tunnel mode and check.
entrance to the road that is static to achieve 10.10.10.11 as its display is correct...
Route by tunnel watch also with 255 administrative distance. I've never used that in my scenarios... lets see...
Concerning
Knockaert
-
'Connected' but 5.0.07.0440 VPN client does not work
Hello
IMPORTANT THING I FORGOT: the customer seems to be connected. It shows a lock locked and says connected but ping shows that nothing is not working too.
I recently tried, in vain, to connect my win7 64 bit laptop to my place of work with the Client VPN 5.0.07.0440. All technitians and support staff could not understand the problem that prevented successful login. Later, I could connect my laptop using the VPN Client 5.0.07.0410 - same home network via an old k9, winXP.
What could be the problem with Win7 system? Work on my old laptop is a temporary solution, but not a good thing. I would be grateful for all the help I can get.
I tried:
-For each access to the Cisco VPN client on my ZoneAlarm firewall.
-Turning off the firewall completely.
-Connect to a different network (in an Internet Café).
Personal support at work said this isn't the network (they checked my too just in case wifi router settings) from my old computer obviously connects without any problem on the first try.
ANY ideas would be very appreciated!
Here is the info yet:
-Cisco VPN Client 5.0.07.0440
-64-bit Windows 7 Home Premium SP 1.
My security software (which may cause the problem as far as I know, even if I close ZoneAlarm):
-Free firewall zone alarm
-Microsoft Security Essentials.
(maybe windows firewall too, if it automatically restarts when I turned off zone alarm)
IMPORTANT THING I FORGOT: the customer seems to be connected. It shows a lock locked and says connected but ping shows that nothing is not working too.
Hello
VPN client traffic is not transmitted from your computer to the VPN at all tunnel.
It's if you have even tried the connection to the remote server before you took this screenshot?
ID say it is a problem with your computer. Some software cause problems for the VPN Client or Client VPN software has problems with the network card real or something similar.
One thing I might suggest is uninstall the firewall software and the VPN Client. After that, it is enough to install the VPN Client and try to login and check the statistics of same as in the pictures above.
-Jouni
EDIT: Whoa 300 posts already
Edit2: If you have a full VPN tunnel, your computer must usually generate connections to the VPN tunnel even if you do not manually connect what either. What makes it even more strange that there are absolutely no traffic in the tunnel. Full VPN tunnel means that all traffic from your computer is transferred to the VPN tunnel when his assets.
-
IPSec remote VPN with VPN client in error
Hello
ASA 5505 configuration is: (installation using ASDM)
output from the command: 'show running-config '.
: Saved
:
ASA Version 8.2 (5)
!
hostname TESTSelect _ from encrypted password
_ encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
sap_vpn_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool test_pool 192.168.10.0 - 192.168.10.20 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.132 inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal sap_vpn group policy
attributes of the strategy of group sap_vpn
value of server DNS 192.168.2.1
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list sap_vpn_splitTunnelAcl
username password encrypted _ privilege 0 test
username test attributes
VPN-group-policy sap_vpn
Username password encrypted _ privilege 15 TEST
type tunnel-group sap_vpn remote access
tunnel-group sap_vpn General-attributes
address test_pool pool
Group Policy - by default-sap_vpn
sap_vpn group of tunnel ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:b67cdffbb9567f754052e72f69ef95f1
: endI use customer VPN authentication with IP 192.168.2.20 host group with username:sap_vpn and key pre-shared password but not able to connect to the vpn and the error message attached.
ASA, set up with the initial wizard ASDM: inside the interface IP 192.168.1.1 (VLAN1) and outside (VLAN2) IP 192.168.2.20 assigned by using DHCP. I use outside interface IP 192.168.2.20 to HOST IP to the VPN client for the remote connection? is it good?
Please advise for this.
Hello
What train a static IP outside? We need a static IP address to connect, please try again and let us know how it works?
Kind regards
-
How to put all through traffic the easy vpn client VPN server
Hi people
I want to ask you, how to put all of the server the easy vpn client VPN traffic through.
I mean, I have a server vpn at home, and if I connect to the vpn from outside server, to be with an IP address of my home.
There is the configuration up to now. Where is the problem?
ROUTER1 #sh running-config
Building configuration...
Current configuration: 5744 bytes
!
! Last configuration change at 19:51:18 UTC Wed Sep 4 2013 by cska
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
ROUTER1 hostname
!
boot-start-marker
usbflash0:CVO boot-BOOT Setup. CFG
boot-end-marker
!
!
!
AAA new-model
!
!
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
Service-module wlan-ap 0 autonomous bootimage
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-1604488384
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1604488384
revocation checking no
!
!
TP-self-signed-1604488384 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 04050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31363034 34383833 6174652D 3834301E 170 3133 30383239 31313539
32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36303434 65642D
38383338 3430819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100CD 57 F1436ED2 8D9E8B99 B6A76D45 FE56716D D99765A9 1722937C F5603F9F
528E27AF 87A24C3D 276FBA1C A5E7C580 CE99748E 39458C 74 862C 2870 16E29F75
7A7930E1 15FA5644 D7ECF257 BF46C470 A3A17AEB 7AB56194 68BFB803 144B7B10
D3722BDD D1FD5E99 8068B77D A1703059 9F0578C7 F7473811 0421490D 627F25C5
4 HAS 250203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355
551 2304 18301680 141B 1326 C111DF7F 9F4ED888 EFE2999A 4C50CDD8 06 12301
03551D0E 04160414 1B1326C1 11DF7F9F 4ED888EF E2999A4C 50CDD812 300 D 0609
2A 864886 04050003 81810096 BD0C2B16 799DB6EE E2C9B7C4 72FEAAAE F70D0101
FF87465C FB7C5248 CFA08E68 522EA08A 4B18BF15 488D D53D9A43 CB400B54 8006
CB21BDFB AA27DA9C C79310B6 BC594A7E D6EDF81D 0DB7D2C1 9EF7251B 19A 75403
211B1E6B 840FE226 48656E9F 67DB4A93 CE75045B A986F0AD 691EE188 7FB86D3F
E43934FA 3D62EC90 8F37590B 618B0C
quit smoking
IP source-route
!
!
!
!
CISCO dhcp IP pool
import all
network 192.168.1.0 255.255.255.0
DNS-server 195.34.133.21 212.186.211.21
default router 192.168.1.1
!
!
IP cef
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
license udi pid CISCO892W-AGN-E-K9 sn FCZ1530C209
!
!
username privilege 15 secret 5 cska $1$ $8j6G 2sMHqIxJX8MQU6vpr75gp1
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto VPNGR
vpngroup key
DNS 212.186.211.21 195.34.133.21
WINS 8.8.8.8
domain chello.at
pool SDM_POOL_1
ACL 120
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
match of group identity VPNGR
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
security association idle time 86400 value
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
!
Bridge IRB
!
!
!
!
interface Loopback0
192.168.4.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
interface BRI0
no ip address
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
FastEthernet6 interface
!
interface FastEthernet7
!
interface FastEthernet8
no ip address
Shutdown
automatic duplex
automatic speed
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
interface GigabitEthernet0
Description Internet
0023.5a03.b6a5 Mac address
customer_id GigabitEthernet0 dhcp IP address
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
!
wlan-ap0 interface
description of the Service interface module to manage the embedded AP
192.168.9.2 IP address 255.255.255.0
ARP timeout 0
!
interface GigabitEthernet0 Wlan
Description interface connecting to the AP the switch embedded internal
!
interface Vlan1
no ip address
Bridge-Group 1
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 192.168.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
local IP SDM_POOL_1 192.168.4.3 pool 192.168.4.245
IP forward-Protocol ND
!
!
IP http server
local IP http authentication
IP http secure server
overload of IP nat inside source list 110 interface GigabitEthernet0
IP nat inside source static tcp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static udp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static tcp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static udp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static tcp 192.168.1.4 3389 interface GigabitEthernet0 3390
IP nat inside source static udp 192.168.1.4 3389 interface GigabitEthernet0 3390
overload of IP nat inside source list 120 interface GigabitEthernet0
IP route 0.0.0.0 0.0.0.0 dhcp
!
exploitation forest esm config
access list 101 ip allow a whole
access-list 110 permit ip 192.168.1.0 0.0.0.255 any
access list 111 permit tcp any any eq 3389
access-list 120 allow ip 192.168.4.0 0.0.0.255 any
!
!
!
!
!
!
!
control plan
!
Bridge Protocol ieee 1
1 channel ip bridge
!
Line con 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
transport output pad rlogin udptn ssh telnet
line to 0
line vty 0 4
privilege level 15
preferred transport ssh
entry ssh transport
transportation out all
!
Thanks in advance
To do this you must make the following changes:
(1) disable split Tunneling by deleting the ACL of your configuration of the client group.
(2) enable NAT for VPN traffic by adding 'ip nat inside' to your virtual model of the client network to the ACL that controls your PAT.Edit: Theses are the changes to your config (also with a little cleaning):
Configuration group customer isakmp crypto VPNGR
No 120 LCD
!
type of interface virtual-Template1 tunnel
IP nat inside
!
no nat ip inside the source list 120 interface GigabitEthernet0 overload
!
access-list 110 permit ip 192.168.4.0 0.0.0.255 any
no access-list 120 allow ip 192.168.4.0 0.0.0.255 any
Sent by Cisco Support technique iPad App
Maybe you are looking for
-
A100-756 - what you think of this machine?
Hi all, I think I have the Satellite A100-756 and I was wondering what other Satellite owners? This is the first time I bought a Toshiba and would like to know what is the support for you? The laptop will be used for games, for the most part, the RPG
-
I have a printer installation Photosmart c410a with a wireless connection to my home network. E - Print works very well. When I try to print from my Ipad 2, IOS 5.01, the printer is recognized by the Ipad. Click here to print and then nothing. Anyone
-
Only some PC can ping server. Same configurations, tried everything
Hi I'm new to this forum. I'm having a problem with my business network. We have a server where all our computers to connect through to access the files from Headquarters. Recently, the server had a problem and as a result had to change the IP addres
-
Is there an easy way to dual boot Windows 7 and Windows XP?
I have win xp pro on a single hard drive and just installed the new drive with win 7pro, y at - it a simple way for dual boot original title: how to dual boot
-
Not start only progresses to double blue screen after the force-feeding down
After many troubles with Trend Micro and following their instructions, I was to open a session and turn it back on. However, first disconnect and restart options did not work so I had to cut the power. When turning it back on, the PC got to a scree