'Connected' but 5.0.07.0440 VPN client does not work
Hello
IMPORTANT THING I FORGOT: the customer seems to be connected. It shows a lock locked and says connected but ping shows that nothing is not working too.
I recently tried, in vain, to connect my win7 64 bit laptop to my place of work with the Client VPN 5.0.07.0440. All technitians and support staff could not understand the problem that prevented successful login. Later, I could connect my laptop using the VPN Client 5.0.07.0410 - same home network via an old k9, winXP.
What could be the problem with Win7 system? Work on my old laptop is a temporary solution, but not a good thing. I would be grateful for all the help I can get.
I tried:
-For each access to the Cisco VPN client on my ZoneAlarm firewall.
-Turning off the firewall completely.
-Connect to a different network (in an Internet Café).
Personal support at work said this isn't the network (they checked my too just in case wifi router settings) from my old computer obviously connects without any problem on the first try.
ANY ideas would be very appreciated!
Here is the info yet:
-Cisco VPN Client 5.0.07.0440
-64-bit Windows 7 Home Premium SP 1.
My security software (which may cause the problem as far as I know, even if I close ZoneAlarm):
-Free firewall zone alarm
-Microsoft Security Essentials.
(maybe windows firewall too, if it automatically restarts when I turned off zone alarm)
IMPORTANT THING I FORGOT: the customer seems to be connected. It shows a lock locked and says connected but ping shows that nothing is not working too.
Hello
VPN client traffic is not transmitted from your computer to the VPN at all tunnel.
It's if you have even tried the connection to the remote server before you took this screenshot?
ID say it is a problem with your computer. Some software cause problems for the VPN Client or Client VPN software has problems with the network card real or something similar.
One thing I might suggest is uninstall the firewall software and the VPN Client. After that, it is enough to install the VPN Client and try to login and check the statistics of same as in the pictures above.
-Jouni
EDIT: Whoa 300 posts already
Edit2: If you have a full VPN tunnel, your computer must usually generate connections to the VPN tunnel even if you do not manually connect what either. What makes it even more strange that there are absolutely no traffic in the tunnel. Full VPN tunnel means that all traffic from your computer is transferred to the VPN tunnel when his assets.
Tags: Cisco Security
Similar Questions
-
I installed my microsoft lifechat 1.4 I can receive my microphone, but when I play my music, it does not work
Hello
· Never work earlier?
Check to see if this article helps you.
-
I updated my Vista home Premium to Windows 7 Ultimate but my Nvidia GeoForce 9600 m GT does not work
Hello
I updated my Vista home Premium x 64 Windows 7 Ultimate x 64, but my Nvidia GeoForce 9600 m GT does not work. It says Version Missmatched.
I have HP HDX X 18 - 1180US laptop.
Is there a link for update or fix this problem?
Thank you
Chance
Hello
Please use driver for Windows 7 of this:
Kind regards
-
I can't connect to my hotmail and windows live reset does not work for now please help
I can't connect to my hotmail address and reset link does not work... keeps telling me to come back later
Hello
Please repost in the correct hotmail forums the link below
-
I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.
I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.
After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]
A few external links to help you set permissions:
MAC
OS X Yosemite: set permissions for items on your Mac
WIN
Set, view, change, or remove permissions on files and folders
Kind regards
Ashutosh
-
Client VPN suddenly does not work
An external interface address changed on this PIX 501 yesterday - all of a sudden their client VPN does not work. I checked that nothing in the config VPN configuration has changed. I now see a *(HASH.) ("OAK NOTIFY ISAKMP INFO: NO_PROPOSAL_CHOSEN") in the journal on the VPN client.
I crossed referenced on google - nothing in the statements of NAT, Access-list, or VPN configurations have changed. Any ideas?
Thank you
GregYour configuration is absolutely perfect.
Please, try the following:
no interface card VPN crypto outdoors
card crypto VPN outside interface
Remove and reapply the cryptomap on the external interface and see if that helps.
Thank you
Jeet Kumar
-
I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!
THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:INSTALL WINDOWSWINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!YOUR HELP WOULD BE GREATLY APPECIATED! THXSContact the computer manfacturer, who provided the original discs.
-
help please
I tried to upgrade the verson windows seven that came on my computer vaio to windows 7 Ultimate edition. now I can't connect to internet, my built-in webcam does not work, the menu drop-down selector top of page disappeared and I do not see where there is no improvement in the operating system. That's happened?
This thread was created in the Windows Update forum. The moderation of Microsoft answers team has moved to forum installation, upgrade, and activate. Thank you.
-
Connected to my system HP-Laserjet-3050 printer does not work
Printer connected to my HP-Laserjet-3050 system does not work. Please help me.
Hello
Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.
And there are some troubleshooting steps for her there too.
HP LaserJet 3050 all-in-One printer range
Or you can also ask in the Forums of HP's Support.
http://h30434.www3.HP.com/PSG/
@@@@@@@@@@@@@@@@@@@@@@@
This can also help you:
"Solve printer problems.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
"Solve printer problems.
In the upper right corner, select your operating system from the menu drop-down.
See you soon.
-
SonicWALL VPN Client does not connect
I use Windows 10 Pro. I can install the NEW Client VPN (4.9.0.2012) very well. When I put in information that works very well. It will even connected, the first time, when you have completed the installation. Here's the crazy part. I can't disable the VPN client. When I try to ACTIVATE the connection he wants to use a telephone line. I can uninstall the client software and tell him NOT to keep data. I can reinstall the client and it will connect the first time. After that it will not. I have already told him to use LAN ONLY entered in the network settings. Only, it crashes and then trying to acquire IP.
Norman
I think you are talking about the Global VPN Client. You must uninstall this version of CVM and install the most recent of 4.9.4.0306 which has been validated to run on Windows 10.
-
Windows - Internet access, no split Tunnel L2TP VPN Clients does not
Greetings!
I have four ASA 5505 that I configured with 4 site to site VPN tunnels (works perfectly) to connect to our company facilities 4. The ASA is also configured with remote access L2TP/IPsec so that a specific group of users of portable computers can connect to and access to all facilities. It also works very well except for one important exception - my split tunnel setting doesn't seem to work, because I can't connect to the Internet outside the VPN resources.
I accept the inherent risk of allowing tunnels to split from a security point of view since I take the necessary steps to secure the systems used for remote access. I would appreciate any feedback on how to get the job of split tunnel.
Here is the configuration:
: Saved
:
ASA Version 1.0000 11
!
SGC hostname
domain somewhere.com
names of
COMMENTS COMMENTS LAN 192.168.2.0 name description
name 75.185.129.13 description of SGC - external INTERNAL ASA
name 172.22.0.0 description of SITE1-LAN Ohio management network
description of SITE2-LAN name 172.23.0.0 Lake Club Network
name 172.24.0.0 description of training3-LAN network Southwood
description of training3 - ASA 123.234.8.124 ASA Southwoods name
INTERNAL name 192.168.10.0 network Local INTERNAL description
description of name 192.168.11.0 INTERNAL - VPN VPN INTERNAL Clients
description of Apollo name 192.168.10.4 INTERNAL domain controller
description of DHD name 192.168.10.2 Access Point #1
description of GDO name 192.168.10.3 Access Point #2
description of Odyssey name 192.168.10.5 INTERNAL Test Server
CMS internal description INTERNAL ASA name 192.168.10.1
name 123.234.8.60 description of SITE1 - ASA ASA management Ohio
description of SITE2 - ASA 123.234.8.189 Lake Club ASA name
description of training3-VOICE name Southwood Voice Network 10.1.0.0
name 172.25.0.0 description of training3-WIFI wireless Southwood
!
interface Vlan1
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan2
nameif INSIDE
security-level 100
255.255.255.0 SGC-internal IP address
!
interface Vlan3
nameif COMMENTS
security-level 50
IP 192.168.2.1 255.255.255.0
!
interface Ethernet0/0
Time Warner Cable description
!
interface Ethernet0/1
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/2
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/3
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/4
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/5
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/6
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/7
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
boot system Disk0: / asa821-11 - k8.bin
Disk0: / config.txt boot configuration
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS domain-lookup outside
INTERNAL DNS domain-lookup
DNS domain-lookup GUEST
DNS server-group DefaultDNS
Name-Server 4.2.2.2
domain somewhere.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
DM_INLINE_TCP_1 tcp service object-group
EQ port 3389 object
port-object eq www
EQ object of the https port
EQ smtp port object
the DM_INLINE_NETWORK_1 object-group network
network-object SITE1-LAN 255.255.0.0
network-object SITE2-LAN 255.255.0.0
network-object training3-LAN 255.255.0.0
object-group training3-GLOBAL network
Southwood description Global Network
network-object training3-LAN 255.255.0.0
network-object training3-VOICE 255.255.0.0
network-object training3-WIFI 255.255.0.0
DM_INLINE_TCP_2 tcp service object-group
EQ port 5900 object
EQ object Port 5901
object-group network INTERNAL GLOBAL
Description Global INTERNAL Network
network-object INTERNAL 255.255.255.0
network-object INTERNALLY-VPN 255.255.255.0
access-list outside_access note Pings allow
outside_access list extended access permit icmp any CMS-external host
access-list outside_access note that VNC for Camille
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_2
access-list outside_access note INTERNAL Services
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_1
DefaultRAGroup_splitTunnelAcl list standard access allowed INTERNAL 255.255.255.0
access-list sheep extended ip INTERNAL 255.255.255.0 allow INTERNAL VPN 255.255.255.0
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE1 extended permit ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list INTERNAL-to-training3 extended permitted ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE2 extended permit ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
no pager
Enable logging
exploitation forest asdm warnings
Debugging trace record
Outside 1500 MTU
MTU 1500 INTERNAL
MTU 1500 COMMENTS
192.168.11.1 mask - local 192.168.11.25 pool IN-HOUSE VPN IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 623.bin
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
(INTERNAL) NAT 0 access-list sheep
NAT (INTERNAL) 1 0.0.0.0 0.0.0.0
NAT (GUEST) 1 0.0.0.0 0.0.0.0
5900 5900 Camille netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
3389 3389 Apollo netmask 255.255.255.255 interface static tcp (INDOOR, outdoor)
public static tcp (INDOOR, outdoor) interface www Apollo www netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface https Apollo https netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface smtp smtp Apollo netmask 255.255.255.255
5901 puppy 5901 netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
Access-group outside_access in interface outside
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server Apollo
Apollo (INTERNAL) AAA-server Apollo
Timeout 5
key *.
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
Enable http server
http 0.0.0.0 0.0.0.0 INTERNAL
http 0.0.0.0 0.0.0.0 COMMENTS
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA TRANS_ESP_3DES_SHA
correspondence address 1 card crypto outside_map INTERNAL SITE1
card crypto outside_map 1 set of peer SITE1 - ASA
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
address for correspondence card crypto outside_map 2 INTERNAL training3
outside_map 2 peer training3 - ASA crypto card game
card crypto outside_map 2 game of transformation-ESP-3DES-SHA
address for correspondence outside_map 3 card crypto INTERNAL SITE2
game card crypto outside_map 3 peers SITE2 - ASA
card crypto outside_map 3 game of transformation-ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
delimiter group @.
Telnet training3 - ASA 255.255.255.255 outside
Telnet SITE2 - ASA 255.255.255.255 outside
Telnet SITE1 - ASA 255.255.255.255 outside
Telnet 0.0.0.0 0.0.0.0 INTERNAL
Telnet 0.0.0.0 0.0.0.0 COMMENTS
Telnet timeout 60
SSH enable ibou
SSH training3 - ASA 255.255.255.255 outside
SSH SITE2 - ASA 255.255.255.255 outside
SSH SITE1 - ASA 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 INTERNAL
SSH 0.0.0.0 0.0.0.0 COMMENTS
SSH timeout 60
Console timeout 0
access to the INTERNAL administration
Hello to tunnel L2TP 100
interface ID client DHCP-client to the outside
dhcpd dns 4.2.2.1 4.2.2.2
dhcpd ping_timeout 750
dhcpd outside auto_config
!
address INTERNAL 192.168.10.100 dhcpd - 192.168.10.200
dhcpd Apollo Odyssey interface INTERNAL dns
dhcpd somewhere.com domain INTERNAL interface
interface of dhcpd option 150 ip 10.1.1.40 INTERNAL
enable dhcpd INTERNAL
!
dhcpd address 192.168.2.100 - 192.168.2.200 COMMENTS
dhcpd dns 4.2.2.1 4.2.2.2 interface COMMENTS
enable dhcpd COMMENTS
!a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 192.43.244.18 prefer external source
WebVPN
allow outside
CSD image disk0:/securedesktop-asa-3.4.2048.pkg
SVC disk0:/sslclient-win-1.1.4.179.pkg 1 image
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 2 image
enable SVC
Group Policy DefaultRAGroup INTERNAL
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
Group Policy DefaultWEBVPNGroup INTERNAL
attributes of Group Policy DefaultWEBVPNGroup
VPN-tunnel-Protocol webvpn
Group Policy DefaultL2LGroup INTERNAL
attributes of Group Policy DefaultL2LGroup
Protocol-tunnel-VPN IPSec l2tp ipsec
Group Policy DefaultACVPNGroup INTERNAL
attributes of Group Policy DefaultACVPNGroup
VPN-tunnel-Protocol svc
attributes of Group Policy DfltGrpPolicy
value of 192.168.10.4 DNS Server 4.2.2.2
VPN - 25 simultaneous connections
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
the value INTERNAL VPN address pools
chip-removal-disconnect disable card
WebVPN
SVC keepalive no
client of dpd-interval SVC no
dpd-interval SVC bridge no
value of customization DfltCustomization
attributes global-tunnel-group DefaultRAGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
Disable ISAKMP keepalive
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
attributes global-tunnel-group DefaultWEBVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultWEBVPNGroup
tunnel-group 123.234.8.60 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.60
pre-shared-key *.
tunnel-group 123.234.8.124 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.124
pre-shared-key *.
tunnel-group 123.234.8.189 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.189
pre-shared-key *.
type tunnel-group DefaultACVPNGroup remote access
attributes global-tunnel-group DefaultACVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultACVPNGroup
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the http
inspect the they
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:423c807c0d63cb3e9aeceda977053f84
: end
ASDM image disk0: / asdm - 623.bin
ASDM location Camille 255.255.255.255 INTERNAL
ASDM location INTERNAL CGT-external 255.255.255.255
ASDM location INTERNAL SITE1-LAN 255.255.0.0
ASDM location INTERNAL SITE2-LAN 255.255.0.0
ASDM location INTERNAL training3-LAN 255.255.0.0
ASDM location INTERNAL training3 - ASA 255.255.255.255
ASDM location INTERNAL GDO 255.255.255.255
ASDM location INTERNAL SITE1 - ASA 255.255.255.255
ASDM location INTERNAL SITE2 - ASA 255.255.255.255
ASDM location INTERNAL training3-VOICE 255.255.0.0
ASDM location puppy 255.255.255.255 INTERNAL
enable ASDM historyI should also mention that my test clients are a combination of Windows XP, Windows 7, and Windows Mobile. Other that in specifying the preshared key and forcing L2TP/IPsec on the client side, the VPN settings on clients are the default settings with the help of MS-CHAP/MS-CHAPv2.
You must configure * intercept-dhcp enable * in your group strategy:
attributes of Group Policy DefaultRAGroup
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.comIntercept-dhcp enable
-Latptop VPN clients (which I assume are on windows computers) is also the * use on remote network default gateway * box unchecked. It is located on the Advanced tab of VPN client TCP/IP properties. Select Client VPN > properties > Networking > TCP/IP Internet Protocol > properties > advanced and uncheck the box.
Alex
-
Remote user VPN IPSec does not work
Hello
I'm trying to configure a remote IPsec VPN on a Cisco router user 1921 but it doesn't work for some reason I don't understand. Does anyone have an idea? I forgot something?
Thank you in advance for your help!
This is part of my configuration:
AAA new-model
!
local AuthentVPN AAA authentication login
local AuthorizVPN AAA authorization network
!
AAA - the id of the joint session
!
username password xxxxxx xxxxx 0 0 encrypted
!
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 5
life 3600
!
ISAKMP crypto client configuration group vpnclient
key XXXXXXXXXXXXXXXXXXXXXXXX
DNS 192.168.0.254
GVA area. INTRA
pool IPPoolVPN
ACL 100
!
!
Crypto ipsec transform-set esp - aes esp-sha-hmac T1
tunnel mode
!
crypto dynamic-map 10 DynMap
game of transformation-T1
!
list of authentication of crypto client myMap AuthentVPN map
card crypto myMap AuthorizVPN isakmp authorization list
client configuration address map myMap crypto answer
card crypto myMap 100-isakmp dynamic ipsec DynMap
!
interface Dialer1
MTU 1492
the negotiated IP address
IP access-group RESTRICT_ENTRY_INTERNET in
NAT outside IP
IP virtual-reassembly in
encapsulation ppp
Dialer pool 1
Dialer-Group 1
PPP authentication pap callin
PPP chap hostname xxxxxxxxx
PPP chap password 0 xxxxxxxxx
PPP pap sent-name of user password 0 xxxxxxxxxxxx xxxxxxxxxxxxxx
crypto myMap map
!
IP pool local 192.168.10.0 IPPoolVPN 192.168.10.253
!
overload of IP nat inside source list 110 interface Dialer1
!
access-list 100 permit ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255
access-list 110 deny ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255
The conflict will be terminated and should be avoided. It might work if you disable split-mining and road, all via the VPN client...
Ideally business networks should not use 192.168.0.0/24; 1 or 2 either since they are common in home routers... you can also have them change their home network easily
Patrick
-
Remote access vpn Wizard does not work?
I have a brand new ASA 5505 running version 8.2 (5). Am connected with the ASDM and run the installation wizard and the VPN remote access Wizard. I am not able to ping the external interface of the internet, and my VPN client gets no response when you try to connect. Config is attached. Any suggestions?
Hello
1.), you need the default route for the SAA to be able to send traffic to the VPN connection initiator
2.) I guess that is something done by hand when to create the basic configuration of the firewall, OR maybe the Startup Wizard would handle this when you make the ASA initially basic settings.
-Jouni
-
Horizon View Client does not work after upgrading to Chrome OS 45
Is there a known issue with Chrome OS version 45?
My client view Horizon worked without problems, but after upgrading to Chrome OS 45, the Horizon view app starts with a white screen which shows just the logo of the view of the Horizon in the middle. Nothing happens. I can't connect to a server or start a virtual machine, it is also not possible to do any configuration. I rebooted my Chromebook, uninstalled, and reinstalled the client Horizon view. Nothing helps...
I'm working on a Pixel 2015 Chromebook. Google Chrome OS is:
Version 45.0.2454.86 (64-bit)
Platform 7262.52.0 (official version) stable-channel samus
Firmware Google_Samus.6300.141.0
Hi, the new Google Chrome OS (3.5) client is now available in the Chrome Web Store. It solves the problem of Chrome OS 45 and offers some new features.
Thank you for your patience and your support!
-
My computer cannot connect to any wireless network. and FN key does not work.
Problem 1: Unable to connect to the internet. I recently went to Disneyland for a 3 day trip, I drove there with my family and when I tried to connect to the wifi in hotels, I realized there was no internet connection on the list. Now I can't connect to my home wifi either.
I don't think it's malicious software or viruses that do, although I may be wrong. I have as well as perhaps he might have gotten damaged during the trip. I'll probably call someone for help tomorrow when I'm less tired. I also tried fn + f3 and has nothing because of my following problem.
Problem 2: Fn key works oddly or not at all. A few weeks ago, when I was a lot of games on my computer. I used the FN up and down to change my fast volume. I used to have a bit of volume pop up showing what it was set, but no more. The same for left and right with the brightness fn.
I'm not fn f3, because there is no nothing.
Help, please. Now, I'm going to sleep and come back in the morning.
UPDATE: I've heard as simply a friend he had to reformat his hard drive due to a very powerful virus that has ceased its ability to connect to the internet. I hope that is not what I have to do. However, I wanted to reset my laptop anyway to get a fresh start.
Thank you. I just had my father come and help me. Something on a plate of connection intel.
Maybe you are looking for
-
How to reset the airport extreme to factory default
My Airport & time capsule are not connected to the modem, saying no dns server is available, however the modem works when connected to the computer. (Macbook) After hours of troubleshooting, I would just restore default settings and see if I can get
-
MY MacBook Pro screen froze on start up. Do not move the cursor. It turns off when I close it and it is just hotter and hotter! Help.
-
Anyone know what this jusched.exec is...
It's on my list of active use, I don't know if it's a hack or a file nesassary. is anyone know what it is?... jusched.exec. Thank you.
-
Please help a pensioner who is a complete beginner. = problem = printer hp officejet 6500 a = more don't print laptop = hp altec Windows 8. have pulled the printer for photo windows ok. have edited the photo, I would now like to print. but when we tr
-
Procrastinator XP: My wireless will still work with Windows 8?
Boy, I feel stupid waiting for the 11th hour ask this question. But there may be some kind guru out there who could lend me a helping hand. Bought my Inspiron E1705 in ' 06... short 1, 6 GHz, original 2G of RAM, Windows XP SP3, love it to death. FI