VPN site to site & outdoor on ASA 5520 VPN client
Hi, I'm jonathan rivero.
I have an ASA 5520 Version 8.0 (2), I configured the site-to-site VPN and works very well, in the other device, I configured the VPN Client for remote users and works very well, but I try to cofigure 2 VPNs on ASA 5520 on the same outside interface and I have the line "outside_map interface card crypto outdoors (for VPN client). , but when I set up the "crypto map VPNL2L outside interface, it replaces the command', and so I can have only a single connection.
the executed show.
ASA1 (config) # sh run
: Saved
:
ASA Version 8.0 (2)
!
hostname ASA1
activate 7esAUjZmKQSFDCZX encrypted password
names of
!
interface Ethernet0/0
nameif inside
security-level 100
address 172.16.3.2 IP 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 200.20.20.1 255.255.255.0
!
interface Ethernet0/1.1
VLAN 1
nameif outside1
security-level 0
no ip address
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/5
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
object-group, net-LAN
object-network 172.16.0.0 255.255.255.0
object-network 172.16.1.0 255.255.255.0
object-network 172.16.2.0 255.255.255.0
object-network 172.16.3.0 255.255.255.0
object-group, NET / remote
object-network 172.16.100.0 255.255.255.0
object-network 172.16.101.0 255.255.255.0
object-network 172.16.102.0 255.255.255.0
object-network 172.16.103.0 255.255.255.0
object-group network net-poolvpn
object-network 192.168.11.0 255.255.255.0
access list outside nat extended permit ip net local group object all
access-list extended sheep allowed ip local object-group net object-group net / remote
access-list extended sheep allowed ip local object-group net net poolvpn object-group
access-list splittun-vpngroup1 extended permitted ip local object-group net net poolvpn object-group
pager lines 24
Within 1500 MTU
Outside 1500 MTU
outside1 MTU 1500
IP local pool ippool 192.168.11.1 - 192.168.11.100 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 100 burst-size 10
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 access list outside nat
Route outside 0.0.0.0 0.0.0.0 200.20.20.1 1
Route inside 172.16.0.0 255.255.255.0 172.16.3.2 1
Route inside 172.16.1.0 255.255.255.0 172.16.3.2 1
Route inside 172.16.2.0 255.255.255.0 172.16.3.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
!
internal vpngroup1 group policy
attributes of the strategy of group vpngroup1
banner value +++ welcome to Cisco Systems 7.0. +++
value of 192.168.0.1 DNS server 192.168.1.1
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value splittun-vpngroup1
value by default-ad domain - domain.local
Split-dns value ad - domain.local
the address value ippool pools
username password asa1 VRTlLlJ48/PoDKjS encrypted privilege 15
tunnel-group 200.30.30.1 type ipsec-l2l
IPSec-attributes tunnel-group 200.30.30.1
pre-shared-key *.
type tunnel-group vpngroup1 remote access
tunnel-group vpngroup1 General-attributes
ippool address pool
Group Policy - by default-vpngroup1
vpngroup1 group of tunnel ipsec-attributes
pre-shared-key *.
context of prompt hostname
Cryptochecksum:00000000000000000000000000000000
: end
ASA2 (config) #sh run
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
VPNL2L interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
tunnel-group 200.30.30.1 type ipsec-l2l
IPSec-attributes tunnel-group 200.30.30.1
pre-shared key cisco
my topology:
I try with the following links, but did not work
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080912cfd.shtml
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml
Best regards...
"" I thing both the force of the SAA with the new road outside, why is that? ".
without the road ASA pushes traffic inward, by default.
In any case, this must have been a learning experience.
Hopefully, this has been no help.
Please rate, all the helful post.
Thank you
Rizwan Muhammed.
Tags: Cisco Security
Similar Questions
-
ASA 5520 to Juniper ss505m vpn
I'm having a problem with the vpn site to site between a asa 5520 and Juniper ss 505 m. The tunnel rises, but we seem unable to pass traffic through the vpn tunnel. It appears on the remote side makes a connection to the ftp server on the Local Server, but is never prompt identification of connection information.
April 19, 2016 13:27:13 SQL-B2B-01: % ASA-4-402116: IPSEC: received a package ESP x.x (SPI = 0xD167A5E8, sequence number = 0xD).
241.90 (user = X.X.241.90) at X.X.167.230. Inside the package décapsulés does not match policy negotiated in the SA. The
package specifies its destination as its Protocol TCP, its source such as X.X.2.68 and X.X.167.233. SA specifies its loc
proxy of Al X.X.167.233/255.255.255.255/tcp/5376 and his remote_proxy as X.X.2.68/255.255.255.255/tcp/5376.
list of remote ip-group of objects allowed extended West Local Group object
NAT static Local_Pub Local destination (indoor, outdoor) static source Remote
Crypto ipsec ikev1 transform-set esp-aes-256 Remote esp-sha-hmac
West-map 95 crypto card is the Remote address
card crypto West-map 95 set peer X.X.241.90
map West-map 95 set transform-set Remote ikev1 crypto
card crypto West-map 95 defined security-association life seconds 28800Juniper-
"Remote-ftp" X.X.167.233 255.255.255.255
Gateway proposal P1 preshare "[email protected]/ * /" proposal "pre-g2-aes256-sha-28800.
P2-proposal "no-pfs-esp-aes256-sha-28800" No. - pfs esp aes256 sha-1 second 28800
----------------------
the top of the policy of "Trust" to "Untrust" "X.X.2.68/32" "Remote-ftp' 'ftp' vpn"Remote-vpn"tunnel log
put on top of the "Untrust" policy to the "Trust" "Remote-ftp' 'X.X.2.68/32' 'ftp' vpn"SonoraQ-vpn"tunnel sign
I do not know Juniper, but it seems that it is trying to negotiate the use of only 5376/tcp on the tunnel, when it should be negotiated just Protocol "ip".
-
Using Cisco Client to site VPN on a behind a NAT ASA 5520
I apologize if this has been asked and we answered in the forums. I looked, and while I found a large number of entries that were dancing all around this question, I never found nothing which addressed this specific issue. We currently use an ASA 5520 as the head end of a relatively large customer to site IPSEC VPN (approximately 240 users, not consecutively). This ASA is currently sitting behind a Checkpoint firewall with a real publicly addressable IP address on its public interface. All of our customers use the legacy Cisco VPN (not the one anyconnect) client. We plan to a few controllers F5 link set up between ISPS and firewalls. For VPN connectivity F5 recommends that we NAT IP address (called a broad IP) to point back to a private IP address on the ASA and F5. My question is, will this work? I've always heard say that the head of line needed to have a public IP address on this subject because this is what will be placed in packages for the client to respond to.
For further information, here's what we have now and what we are invited to attend.
Current
ISP - router - firewall-fire - ASA (public IP address as endpoint)
Proposed
ISP - router - F5 (public IP address as endpoint using a NAT to ASA) - Firewall - ASA (10.X.X.X as its external interface)
Proposed alternative
ISP - router - F5 (public IP address as endpoint using a NAT to ASA) - ASA (10.X.X.X as its external interface)
All thoughts at this moment would be greatly appreciated. Thank you!
Hello
If there is a static NAT one by one on F5 to the external interface of the ASA, then I don't think they would be any problems.
Because when the client will attempt to connect to IKE to the translated public IP, F5 will redirect the request to ASA outside interface that is configured for the VPN.In addition, to ensure the udp500, 4500 and esp is allowed and then you should be good to go.
HTH
Concerning
Mohit -
VPN site to Site with ASA 5520 * please help *.
I am using two ASA 5520, and try to put up a site to site VPN. This seems to be pretty simple, but I'm on my third day of train this is up and running. Both 5520's are running the latest 9.1 (5) IOS.
Please note: I replaced it with [#1-WAN IP] and [#2-WAN IP] for WAN IP of the ASA addresses.
Thanks in advance for any help you may have.
-------------------------------------------------------------------------------------------------------------------------------------------------
ASA 5520 # 1:
Crypto ikev1 allow outside
the local object of net network
10.0.0.0 subnet 255.255.255.0net remote object network
172.20.0.0 subnet 255.255.255.0outside_1_cryptomap list of allowed ip object local net net access / remote
tunnel-group [IP #2-WAN] type ipsec-l2l
IPSec-attributes tunnel-group [#2-WAN IP]
pre-shared-key cisco123IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
card crypto oustide_map 1 match address outside_1_cryptomap
card crypto oustide_map 1 set transform-set ESP-3DES-SHA ikev1
card crypto outside_map 1 set pfs Group1
map 1 set outside_map crypto peer [#2-WAN IP]
outside_map interface card crypto outsideNAT (inside, outside) 1 local static source net net-local destination static remote net net / remote
-------------------------------------------------------------------------------------------------------------------------------------------------
ASA 5520 #2:
Crypto ikev1 allow outside
the local object of net network
172.20.0.0 subnet 255.255.255.0net remote object network
10.0.0.0 subnet 255.255.255.0outside_1_cryptomap list of allowed ip object local net net access / remote
tunnel-group [#1-WAN IP] type ipsec-l2l
IPSec-attributes tunnel-group [#1-WAN IP]
pre-shared-key cisco123IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
card crypto oustide_map 1 match address outside_1_cryptomap
card crypto oustide_map 1 set transform-set ESP-3DES-SHA ikev1
card crypto outside_map 1 set pfs Group1
map 1 set outside_map crypto peer [#1-WAN IP]
outside_map interface card crypto outsideNAT (inside, outside) 1 local static source net net-local destination static remote net net / remote
Try to correct the mistakes in the two configs.
In some places, you have 'oustide_map' where you need "outside_map".
-
% 7-ASA-710005: request TCP thrown error in the Client VPN Site to CISCO ASA 5510
Hi friends,
I am trying to built customer to site VPN CISCO ASA 5510 8.4 (4) and get error below when connecting to a cisco VPN client software. Also, I'm below ASA, log. Please help me to reslove.
Error in CISCO VPN Client software:
Secure VPN connection terminated locally by the client.
Reason: 414: unable to establish a TCP connection.
Error in CISCO ASA 5510
7-ASA-710005%: TCP request and eliminated from
49276 outward: 10000 The ASA configuration:
XYZ # sh run
: Saved
:
ASA Version 8.4 (4)
!
hostname XYZ
domain XYZ
activate the password encrypted 3uLkVc9JwRA1/OXb N3
activate the encrypted password of R/x90UjisGVJVlh2
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
nameif outside_rim
security-level 0
IP 1.1.1.1 255.255.255.252
!
interface Ethernet0/1
full duplex
nameif XYZ_DMZ
security-level 50
IP 172.1.1.1 255.255.255.248
!
interface Ethernet0/2
Speed 100
full duplex
nameif outside
security-level 0
IP address 2.2.2.2 255.255.255.252
!
interface Ethernet0/3
Speed 100
full duplex
nameif inside
security-level 100
IP 3.3.3.3 255.255.255.224
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
!
boot system Disk0: / asa844 - k8.bin
passive FTP mode
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name xx.xx.xx.xx
Server name xx.xx.xx.xx
Server name xx.xx.xx.xx
Server name xx.xx.xx.xx
domain XYZ
network object obj - 172.17.10.3
Home 172.17.10.3
network object obj - 10.1.134.0
10.1.134.0 subnet 255.255.255.0
network object obj - 208.75.237.0
208.75.237.0 subnet 255.255.255.0
network object obj - 10.7.0.0
10.7.0.0 subnet 255.255.0.0
network object obj - 172.17.2.0
172.17.2.0 subnet 255.255.255.0
network object obj - 172.17.3.0
172.17.3.0 subnet 255.255.255.0
network object obj - 172.19.2.0
172.19.2.0 subnet 255.255.255.0
network object obj - 172.19.3.0
172.19.3.0 subnet 255.255.255.0
network object obj - 172.19.7.0
172.19.7.0 subnet 255.255.255.0
network object obj - 10.1.0.0
10.1.0.0 subnet 255.255.0.0
network object obj - 10.2.0.0
10.2.0.0 subnet 255.255.0.0
network object obj - 10.3.0.0
10.3.0.0 subnet 255.255.0.0
network object obj - 10.4.0.0
10.4.0.0 subnet 255.255.0.0
network object obj - 10.6.0.0
10.6.0.0 subnet 255.255.0.0
network object obj - 10.9.0.0
10.9.0.0 subnet 255.255.0.0
network object obj - 10.11.0.0
10.11.0.0 subnet 255.255.0.0
network object obj - 10.12.0.0
10.12.0.0 subnet 255.255.0.0
network object obj - 172.19.1.0
172.19.1.0 subnet 255.255.255.0
network object obj - 172.21.2.0
172.21.2.0 subnet 255.255.255.0
network object obj - 172.16.2.0
172.16.2.0 subnet 255.255.255.0
network object obj - 10.19.130.201
Home 10.19.130.201
network object obj - 172.30.2.0
172.30.2.0 subnet 255.255.255.0
network object obj - 172.30.3.0
172.30.3.0 subnet 255.255.255.0
network object obj - 172.30.7.0
172.30.7.0 subnet 255.255.255.0
network object obj - 10.10.1.0
10.10.1.0 subnet 255.255.255.0
network object obj - 10.19.130.0
10.19.130.0 subnet 255.255.255.0
network of object obj-XXXXXXXX
host XXXXXXXX
network object obj - 145.248.194.0
145.248.194.0 subnet 255.255.255.0
network object obj - 10.1.134.100
Home 10.1.134.100
network object obj - 10.9.124.100
Home 10.9.124.100
network object obj - 10.1.134.101
Home 10.1.134.101
network object obj - 10.9.124.101
Home 10.9.124.101
network object obj - 10.1.134.102
Home 10.1.134.102
network object obj - 10.9.124.102
Home 10.9.124.102
network object obj - 115.111.99.133
Home 115.111.99.133
network object obj - 10.8.108.0
10.8.108.0 subnet 255.255.255.0
network object obj - 115.111.99.129
Home 115.111.99.129
network object obj - 195.254.159.133
Home 195.254.159.133
network object obj - 195.254.158.136
Home 195.254.158.136
network object obj - 209.164.192.0
subnet 209.164.192.0 255.255.224.0
network object obj - 209.164.208.19
Home 209.164.208.19
network object obj - 209.164.192.126
Home 209.164.192.126
network object obj - 10.8.100.128
subnet 10.8.100.128 255.255.255.128
network object obj - 115.111.99.130
Home 115.111.99.130
network object obj - 10.10.0.0
subnet 10.10.0.0 255.255.0.0
network object obj - 115.111.99.132
Home 115.111.99.132
network object obj - 10.10.1.45
Home 10.10.1.45
network object obj - 10.99.132.0
10.99.132.0 subnet 255.255.255.0
the Serversubnet object-group network
object-network 10.10.1.0 255.255.255.0
network-object 10.10.5.0 255.255.255.192
the XYZ_destinations object-group network
object-network 10.1.0.0 255.255.0.0
object-network 10.2.0.0 255.255.0.0
network-object 10.3.0.0 255.255.0.0
network-object 10.4.0.0 255.255.0.0
network-object 10.6.0.0 255.255.0.0
network-object 10.7.0.0 255.255.0.0
network-object 10.11.0.0 255.255.0.0
object-network 10.12.0.0 255.255.0.0
object-network 172.19.1.0 255.255.255.0
object-network 172.19.2.0 255.255.255.0
object-network 172.19.3.0 255.255.255.0
object-network 172.19.7.0 255.255.255.0
object-network 172.17.2.0 255.255.255.0
object-network 172.17.3.0 255.255.255.0
object-network 172.16.2.0 255.255.255.0
object-network 172.16.3.0 255.255.255.0
host of the object-Network 10.50.2.206
the XYZ_us_admin object-group network
network-object 10.3.1.245 255.255.255.255
network-object 10.5.33.7 255.255.255.255
network-object 10.211.5.7 255.255.255.255
network-object 10.3.33.7 255.255.255.255
network-object 10.211.3.7 255.255.255.255
the XYZ_blr_networkdevices object-group network
object-network 10.200.10.0 255.255.255.0
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 145.248.194.0 255.255.255.0
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 host 172.16.2.21
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 host 172.16.2.22
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 host XXXXXXXX
Access extensive list ip 10.19.130.0 XYZ_PAT allow 255.255.255.0 any
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 195.254.159.133
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 195.254.158.136
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 any
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 209.164.192.0 255.255.224.0
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 209.164.208.19
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 209.164.192.126
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 208.75.237.0 255.255.255.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.7.0.0 255.255.0.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.17.2.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.17.3.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.2.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.3.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.7.0 255.255.255.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.2.0.0 255.255.0.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.3.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.4.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.6.0.0 255.255.0.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.9.0.0 255.255.0.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.11.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.12.0.0 255.255.0.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.1.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.21.2.0 255.255.255.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 172.16.2.0 255.255.255.0
access-list extended sheep allowed host ip 10.19.130.201 172.30.2.0 255.255.255.0
access-list extended sheep allowed host ip 10.19.130.201 172.30.3.0 255.255.255.0
access-list extended sheep allowed host ip 10.19.130.201 172.30.7.0 255.255.255.0
access-list extended sheep allowed ip object-group Serversubnet-group of objects XYZ_destinations
10.10.1.0 IP Access-list extended sheep 255.255.255.0 allow 10.2.0.0 255.255.0.0
10.19.130.0 IP Access-list extended sheep 255.255.255.0 allow host XXXXXXXX
IP 10.19.130.0 allow Access-list extended sheep 255.255.255.0 145.248.194.0 255.255.255.0
Access extensive list ip 10.8.108.0 Guest_PAT allow 255.255.255.0 any
CACIB list extended access permitted ip 10.8.100.128 255.255.255.128 145.248.194.0 255.255.255.0
Access extensive list ip 10.8.100.128 Cacib_PAT allow 255.255.255.128 all
Access extensive list ip 10.1.134.0 New_Edge allow 255.255.255.0 208.75.237.0 255.255.255.0
Allow XYZ_global to access extended list ip 10.7.0.0 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.7.0.0 255.255.0.0
Access extensive list ip 172.17.2.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.17.3.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.2.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.3.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.7.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.0.0 XYZ_global allow 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list 10.2.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Allow XYZ_global to access extended list ip 10.3.0.0 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list 10.4.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Access extensive list 10.6.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Access extensive list ip 10.9.0.0 XYZ_global allow 255.255.0.0 10.1.134.0 255.255.255.0
Allow XYZ_global to access extended list ip 10.11.0.0 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list 10.12.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.1.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.21.2.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.17.2.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.17.3.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.2.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.3.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.7.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.1.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.2.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.3.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.4.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.6.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.9.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.11.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.12.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.1.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.21.2.0 255.255.255.0
XYZ_global to access extended list ip 172.16.2.0 allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.16.2.0 255.255.255.0
Access extensive list ip 172.30.2.0 XYZ_global allow 255.255.255.0 host 10.19.130.201
XYZ_global list extended access allowed host ip 10.19.130.201 172.30.2.0 255.255.255.0
Access extensive list ip 172.30.3.0 XYZ_global allow 255.255.255.0 host 10.19.130.201
XYZ_global list extended access allowed host ip 10.19.130.201 172.30.3.0 255.255.255.0
Access extensive list ip 172.30.7.0 XYZ_global allow 255.255.255.0 host 10.19.130.201
XYZ_global list extended access allowed host ip 10.19.130.201 172.30.7.0 255.255.255.0
XYZ_global list extended access permitted ip object-group Serversubnet-group of objects XYZ_destinations
XYZ_global list extended access permitted ip object-group XYZ_destinations-group of objects Serversubnet
ML_VPN list extended access allowed host ip 115.111.99.129 209.164.192.0 255.255.224.0
permit access list extended ip host 115.111.99.129 ML_VPN 209.164.208.19
permit access list extended ip host 115.111.99.129 ML_VPN 209.164.192.126
permit access list extended ip host 10.9.124.100 Da_VPN 10.125.81.88
permit access list extended ip host 10.9.124.101 Da_VPN 10.125.81.88
permit access list extended ip host 10.9.124.102 Da_VPN 10.125.81.88
Da_VPN list extended access allowed host ip 10.9.124.100 10.125.81.0 255.255.255.0
Da_VPN list extended access allowed host ip 10.9.124.101 10.125.81.0 255.255.255.0
Da_VPN list extended access allowed host ip 10.9.124.102 10.125.81.0 255.255.255.0
Sr_PAT to access extended list ip 10.10.0.0 allow 255.255.0.0 any
Da_Pd_VPN list extended access allowed host ip 10.9.124.100 10.125.80.64 255.255.255.192
Da_Pd_VPN list extended access allowed host ip 10.9.124.100 10.125.64.0 255.255.240.0
permit access list extended ip host 10.9.124.100 Da_Pd_VPN 10.125.85.46
permit access list extended ip host 10.9.124.100 Da_Pd_VPN 10.125.86.46
Da_Pd_VPN list extended access allowed host ip 10.9.124.101 10.125.80.64 255.255.255.192
Da_Pd_VPN list extended access allowed host ip 10.9.124.101 10.125.64.0 255.255.240.0
permit access list extended ip host 10.9.124.101 Da_Pd_VPN 10.125.85.46
permit access list extended ip host 10.9.124.101 Da_Pd_VPN 10.125.86.46
Da_Pd_VPN list extended access allowed host ip 10.9.124.102 10.125.80.64 255.255.255.192
Da_Pd_VPN list extended access allowed host ip 10.9.124.102 10.125.64.0 255.255.240.0
permit access list extended ip host 10.9.124.102 Da_Pd_VPN 10.125.85.46
permit access list extended ip host 10.9.124.102 Da_Pd_VPN 10.125.86.46
Access extensive list ip 10.19.130.0 XYZ_reliance allow 255.255.255.0 145.248.194.0 255.255.255.0
access-list coextended permit ip host 2.2.2.2 XXXXXXXX
access-list coextended allow the host ip XXXXXXXXhost 2.2.2.2
permitted this access list extended ip 10.1.134.0 255.255.255.0 208.75.237.0 255.255.255.0
permitted this access list extended ip 208.75.237.0 255.255.255.0 10.1.134.0 255.255.255.0
access list acl-outside extended permit ip host 57.66.81.159 172.17.10.3
access list acl-outside extended permit ip host 80.169.223.179 172.17.10.3
access list acl-outside scope permit ip any host 172.17.10.3
access list acl-outside extended permitted tcp any host 10.10.1.45 eq https
access list acl-outside extended permit tcp any any eq 10000
access list acl-outside extended deny ip any any newspaper
pager lines 10
Enable logging
debug logging in buffered memory
outside_rim MTU 1500
MTU 1500 XYZ_DMZ
Outside 1500 MTU
Within 1500 MTU
IP pool local XYZ_c2s_vpn_pool 172.30.10.51 - 172.30.10.254
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ICMP allow any inside
don't allow no asdm history
ARP timeout 14400
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 208.75.237.0 obj - 208.75.237.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.7.0.0 obj - 10.7.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.17.2.0 obj - 172.17.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.17.3.0 obj - 172.17.3.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.2.0 obj - 172.19.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.3.0 obj - 172.19.3.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.7.0 obj - 172.19.7.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.1.0.0 obj - 10.1.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.2.0.0 obj - 10.2.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.3.0.0 obj - 10.3.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.4.0.0 obj - 10.4.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.6.0.0 obj - 10.6.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.9.0.0 obj - 10.9.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.11.0.0 obj - 10.11.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.12.0.0 obj - 10.12.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.1.0 obj - 172.19.1.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.21.2.0 obj - 172.21.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.16.2.0 obj - 172.16.2.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.201 obj - 10.19.130.201 destination static obj - 172.30.2.0 obj - 172.30.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.201 obj - 10.19.130.201 destination static obj - 172.30.3.0 obj - 172.30.3.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.201 obj - 10.19.130.201 destination static obj - 172.30.7.0 obj - 172.30.7.0 no-proxy-arp-search to itinerary
NAT (inside, all) static source Serversubnet Serversubnet XYZ_destinations XYZ_destinations non-proxy-arp-search of route static destination
NAT (inside, all) source static obj - 10.10.1.0 obj - 10.10.1.0 destination static obj - 10.2.0.0 obj - 10.2.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.0 obj - 10.19.130.0 destination static obj-XXXXXXXX XXXXXXXX - obj non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.0 obj - 10.19.130.0 destination static obj - 145.248.194.0 obj - 145.248.194.0 no-proxy-arp-search to itinerary
NAT source (indoor, outdoor), obj static obj - 10.1.134.100 - 10.9.124.100
NAT source (indoor, outdoor), obj static obj - 10.1.134.101 - 10.9.124.101
NAT source (indoor, outdoor), obj static obj - 10.1.134.102 - 10.9.124.102
NAT interface dynamic obj - 10.8.108.0 source (indoor, outdoor)
NAT (inside, outside) source dynamic obj - 10.19.130.0 obj - 115.111.99.129
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 195.254.159.133 obj - 195.254.159.133
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 195.254.158.136 obj - 195.254.158.136
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 209.164.192.0 obj - 209.164.192.0
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 209.164.208.19 obj - 209.164.208.19
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 209.164.192.126 obj - 209.164.192.126
NAT (inside, outside) source dynamic obj - 10.8.100.128 obj - 115.111.99.130
NAT (inside, outside) source dynamic obj - 10.10.0.0 obj - 115.111.99.132
NAT source (indoor, outdoor), obj static obj - 10.10.1.45 - 115.111.99.133
NAT (inside, outside) source dynamic obj - 10.99.132.0 obj - 115.111.99.129
!
network object obj - 172.17.10.3
NAT (XYZ_DMZ, outside) static 115.111.99.134
Access-group acl-outside in external interface
Route outside 0.0.0.0 0.0.0.0 115.111.23.129 1
Route outside 0.0.0.0 0.0.0.0 115.254.127.130 10
Route inside 10.10.0.0 255.255.0.0 10.8.100.1 1
Route inside 10.10.1.0 255.255.255.0 10.8.100.1 1
Route inside 10.10.5.0 255.255.255.192 10.8.100.1 1
Route inside 10.8.100.128 255.255.255.128 10.8.100.1 1
Route inside 10.8.108.0 255.255.255.0 10.8.100.1 1
Route inside 10.19.130.0 255.255.255.0 10.8.100.1 1
Route inside 10.99.4.0 255.255.255.0 10.99.130.254 1
Route inside 10.99.132.0 255.255.255.0 10.8.100.1 1
Route inside 10.1.134.0 255.255.255.0 10.8.100.1 1
Route outside 208.75.237.0 255.255.255.0 115.111.23.129 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication LOCAL telnet console
LOCAL AAA authorization command
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn2
Crypto ipsec transform-set esp-aes-256 ikev1, esp-md5-hmac vpn6
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn5
Crypto ipsec transform-set esp-aes-256 ikev1, esp-md5-hmac vpn7
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn4
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn1
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn_reliance
Crypto ipsec transform-set esp-3des esp-md5-hmac ikev1 c2s_vpn
86400 seconds, duration of life crypto ipsec security association
Crypto-map dynamic dyn1 ikev1 transform-set c2s_vpn 1 set
Crypto-map dynamic dyn1 1jeu reverse-road
card crypto vpn 1 corresponds to the address XYZ
card 1 set of peer XYZ Peer IP vpn crypto
1 set transform-set vpn1 ikev1 vpn crypto card
card crypto vpn 1 lifetime of security set association, 3600 seconds
card crypto vpn 1 set security-association life kilobytes 4608000
correspondence vpn crypto card address 2 DON'T
2 peer NE_Peer IP vpn crypto card game
2 set transform-set vpn2 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 2 set security-association
card crypto vpn 2 set security-association life kilobytes 4608000
card crypto vpn 4 corresponds to the address ML_VPN
card crypto vpn 4 set pfs
vpn crypto card game 4 peers ML_Peer IP
4 set transform-set vpn4 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 4 set - the security association
card crypto vpn 4 set security-association life kilobytes 4608000
vpn crypto card 5 corresponds to the address XYZ_global
vpn crypto card game 5 peers XYZ_globa_Peer IP
5 set transform-set vpn5 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 5 set - the security association
card 5 security-association life set vpn crypto kilobytes 4608000
vpn crypto card 6 corresponds to the address Da_VPN
vpn crypto card game 6 peers Da_VPN_Peer IP
6 set transform-set vpn6 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 6 set - the security association
card crypto vpn 6 set security-association life kilobytes 4608000
vpn crypto card 7 corresponds to the address Da_Pd_VPN
7 peer Da_Pd_VPN_Peer IP vpn crypto card game
7 set transform-set vpn6 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 7 set - the security association
card crypto vpn 7 set security-association life kilobytes 4608000
vpn outside crypto map interface
crypto map vpn_reliance 1 corresponds to the address XYZ_rim
card crypto vpn_reliance 1 set of peer XYZ_rim_Peer IP
card crypto 1 ikev1 transform-set vpn_reliance set vpn_reliance
vpn_reliance card crypto 1 lifetime of security set association, 3600 seconds
card crypto vpn_reliance 1 set security-association life kilobytes 4608000
card crypto vpn_reliance interface outside_rim
dynamic mymap 1 dyn1 ipsec-isakmp crypto map
crypto isakmp identity address
No encryption isakmp nat-traversal
Crypto ikev1 enable outside_rim
Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
aes-256 encryption
sha hash
Group 5
lifetime 28800
IKEv1 crypto policy 2
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
IKEv1 crypto policy 4
preshared authentication
aes-256 encryption
sha hash
Group 5
life 28000
IKEv1 crypto policy 5
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
preshared authentication
3des encryption
sha hash
Group 2
life 43200
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 10.8.100.0 255.255.255.224 inside
Telnet timeout 5
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
internal XYZ_c2s_vpn group strategy
username testadmin encrypted password oFJjANE3QKoA206w
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXXtype ipsec-l2l
tunnel-group XXXXXXXXipsec-attributes
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
type tunnel-group XYZ_c2s_vpn remote access
attributes global-tunnel-group XYZ_c2s_vpn
address pool XYZ_c2s_vpn_pool
IPSec-attributes tunnel-group XYZ_c2s_vpn
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
Review the ip options
!
global service-policy global_policy
level 3 privilege see the running-config command exec mode
logging of orders privilege see the level 3 exec mode
privilege see the level 3 exec mode command crypto
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:caa7476cd348ed89b95d37d4e3c9e1d8
: endXYZ #.
Good news
Follow these steps:
network object obj - 172.30.10.0_24
172.30.10.0 subnet 255.255.255.0
!
the LOCAL_NETWORKS_VPN object-group network
object-network 1.1.1.0 255.255.255.0
!
NAT (inside, outside) 1 static source LOCAL_NETWORKS_VPN destination LOCAL_NETWORKS_VPN static obj - 172.30.10.0_24 obj - 172.30.10.0_24 - route search
* Where 1.1.1.0/24 is the internal network that you want to reach through the tunnel.
Keep me posted.
Thank you.
Please note all messages that will be useful.
-
PIX - ASA, allow RA VPN clients to access servers at remote sites
I got L2L tunnels set up for a couple of remote sites (PIX) for several months now. We have a VPN concentrator, which will go EOL soon, so I'm working on moving our existing customers of RA our ASA. I have a problem, allowing RA clients access to a server to one of our remote sites. PIX and ASA (main site) relevant config is shown below. The error I get on the remote PIX when you try a ping on the VPN client is:
Group = 204.14. *. *, IP = 204.14. *. * cheque card static Crypto Card = outside_map, seq = 40, ACL does not proxy IDs src:172.16.200.0 dst: 172.16.26.0
The config:
Hand ASA config
access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.1.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.22.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.200.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.200.0 255.255.255.0
access extensive list ip 172.16.0.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.1.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.22.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.200.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0
card crypto outside_map 60 match address outside_cryptomap_60
outside_map 60 set crypto map peer 24.97. *. *
card crypto outside_map 60 the transform-set ESP-3DES-MD5 value
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
=========================================
Remote config PIX
access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.0.0 255.255.255.0
access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.1.0 255.255.255.0
access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.22.0 255.255.255.0
access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.200.0 255.255.255.0
access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.0.0 255.255.255.0
access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.1.0 255.255.255.0
access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.22.0 255.255.255.0
access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.200.0 255.255.255.0
card crypto outside_map 60 match address outside_cryptomap_60
peer set card crypto outside_map 60 204.14. *. *
card crypto outside_map 60 the transform-set ESP-3DES-MD5 value
outside_map interface card crypto outside
EDIT: Guess, I might add, remote site is 172.16.26.0/24 VLAN VPN is 172.16.200.0/24...
What you want to do is 'tunnelall', which is not split tunneling. This will still allow customers to join the main and remote site, but not allow them to access internet... unless you have expressly authorized to make a 'nat (outside)"or something. Your journey on the client will be, Secured route 0.0.0.0 0.0.0.0
attributes of group policy
Split-tunnel-policy tunnelall
Who is your current config, I don't see where the acl of walton is attributed to what to split tunnel?
-
VPN site to Site with an ASA behind Port Forwarding device
Hi, I want to configure a VPN from Site to site with an ASA with a public static IP adress and other ASA located behind a device with a public IP address that can forward ports to the ASA.
I have found no documentation for this configuration in the Cisco KB, anyone have a link for me or a brief description of the requirements?
Thank you
Tobias
Hello
Take a look at this documentation
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080094ecd.shtml
Hope this helps
-Jouni
-
Tunnel VPN ASA 5520 (DMZ + INSIDE) destined for OUTSIDE
I can't find any reference to anywhere else.
We have an ASA 5520 to our site HQ (inside the network) with several regional subnets on the DMZ interface.
We need connectivity VPN Site to Site between the INSIDE and a remote control on the OUTSIDE of the site, as well as between the DMZ subnets and even outside the site. The interface from the OUTSIDE of the SAA must be local VPN endpoint for all tunnels.
I created a S2S VPN between the INSIDE and the OUTSIDE site and it works great.
When I create a VPN S2S tunnel between a site of DMZ and even outside the site (using the same settings the and remote, but with a cryptomap different because the local subnet (DMZ) is different from the other inside the subnet, the traffic gets the mapping (show crypto isakmp his) to the same cryptomap that was created for the access to the tunnel from the OUTSIDE) , instead of to the new cryptomap, so remote endpoint deletes it, and traffic also causes SPI incorrect of for the remote endpoint, which makes the original INTERIOR outside OF THE VPN tunnel to fall from time to time.
Is this a bug?
I also did a local S2S VPN tunnel configuration test of networks as everything INSIDE and the DMZ. With the help of the wizard VPN S2S leads ASA only to create a NAT rule exempted for the subnet on the INSIDE interface. Can I manually create another tax-exempt NAT rule to the side of the DMZ and use this a S2S tunnel to connect sites inside and DMZ to the remote OFF-SITE in a connection profile?
I'm building a Rube Goldberg?
Thank you
George
Hi George,.
It seems you have a situation overlapping it, are you sure that subnets inside did not overlap with the networks from the DMZ? A package tracer could clarify wha that the ASA is actually sending.
In addition, you can merge the two interfaces on the same card encryption if you wish, just make sure that the NAT is configured correctly. For example; Source NAT (all, outside) static...
It may be useful
-Randy-
-
I set up a VPN site-to site between a Cisco ISR 1841 and a Cisco ASA 5520, everything seems to work but I have a few questions.
1. I must explicitly authorize all VPN traffic in the ACL on the external interface of the 1841, y at - it an equivalent of router "vpn sysopt connection permit?
2. Although the VPN rises and pass traffic, I have the opportunity to see what follows?
* 14:11:52.883 22 June: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the peer 1.1.1.1
You can share the outputs full? Both sides at the same time?
Bottom line, I don't think it's normal in IOS 12.4 mainline unless packages are leaking clear ;/
-
Cisco VPN client + VPN site-to-site
Hi all
I have two ASA5505 with a site to site VPN.
One of the ASA is connected to the internal network 192.168.150.0.
It is connected to 192.168.151.0.
I also configured IPSec Cisco VPN client that is connected to 192.168.150.0.
I would like to know if it is possible for a connected with the Cisco VPN client to access the 192.168.151.0 by the site-to-site VPN network.
Thank you!
Hello
If you mean that the IP addresses of the VPN Pool are something like 192.168.150.x then I suggest to use a totally different network than those used on LANs.
At the software level 9.1 basically causes changes to how are the NAT0 configurations.
MAIN SITE
network of the VPN-POOL object
subnet x.x.x.x y.y.y.y
being REMOTE-LAN network
192.168.151.0 subnet 255.255.255.0
destination of static NAT VPN VPN-POOL POOL (outdoors, outdoor) static REMOTE - LAN LAN
REMOTE SITE
network of the VPN-POOL object
subnet x.x.x.x y.y.y.y
the object of the LAN network
192.168.151.0 subnet 255.255.255.0
NAT static destination LAN LAN (indoor, outdoor) static source VPN-VPN-POOL
Otherwise, I would imagine that the same kind of configurations above apply. You need the ' same-security-movement ' command to allow the 'outside' to ' outside ' of the movement. You will have to ensure that the ACL from Tunnel Split contains the remote site network. And of course, you should make sure that the ACL crypto sets / include traffic between VPN pool and the network 192.168.151.0/24 on both sides ASAs.
-Jouni
-
VPN clients hairpining through a tunnel from site to site
I have a 8.2 (5) ASA 5510 in Site1 and a 8.2 (1) ASA 5505 Site2 they are configured with a tunnel from site to site.
Each site has VPN clients that connect and I would like to allow customers to access on both sides across the site-to-site tunnel servers.
I enabled same-security-traffic permit intra-interface I also added the remote networks to access list who made the split tunneling.
I think I'm doing something wrong with nat, but I don't know, any help would be greatly appreciated.
Site1 Clients1 (172.17.2.0/24) (10.0.254.0/24)
ASA Version 8.2 (5)
!
hostname site1
names of
DNS-guard
!
interface Ethernet0/0
nameif outside
security-level 0
IP address site1 255.255.255.240
!
interface Ethernet0/1
nameif inside
security-level 100
IP 172.17.2.1 255.255.255.0
!
interface Ethernet0/2
Shutdown
nameif DMZ
security-level 0
IP 10.10.10.1 255.255.255.0
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 0
IP 192.168.1.1 255.255.255.0
management only
!
passive FTP mode
permit same-security-traffic intra-interface
VPN - UK wide ip 172.17.2.0 access list allow 255.255.255.0 172.18.2.0 255.255.255.0
access extensive list ip 172.17.2.0 inside_nat0_outbound allow 255.255.255.0 192.168.123.0 255.255.255.0
access extensive list ip 172.17.2.0 inside_nat0_outbound allow 255.255.255.0 172.18.2.0 255.255.255.0
access extensive list ip 172.17.2.0 inside_nat0_outbound allow 255.255.255.0 10.0.254.0 255.255.255.0
Notice of inside_nat0_outbound access-list us Client Server UK
access extensive list ip 10.0.254.0 inside_nat0_outbound allow 255.255.255.0 172.18.2.0 255.255.255.0
access extensive list ip 192.168.123.0 inside_nat0_outbound allow 255.255.255.0 10.0.254.0 255.255.255.0
access extensive list ip 172.18.2.0 inside_nat0_outbound allow 255.255.255.0 10.0.254.0 255.255.255.0
Standard access list Split_Tunnel_List allow 172.17.2.0 255.255.255.0
Standard access list Split_Tunnel_List allow 172.18.2.0 255.255.255.0
Split_Tunnel_List list standard access allowed 192.168.123.0 255.255.255.0
Split_Tunnel_List of access note list UK VPN Client pool
Standard access list Split_Tunnel_List allow 172.255.2.0 255.255.255.0
outside-2 extended access list permit tcp any any eq smtp
outside-2 extended access list permit tcp any any eq 82
outside-2 extended access list permit tcp any any eq 81
outside-2 extended access list permit tcp everything any https eq
outside-2 extended access list permit tcp any any eq imap4
outside-2 extended access list permit tcp any any eq ldaps
outside-2 extended access list permit tcp any any eq pop3
outside-2 extended access list permit tcp any any eq www
outside-2 extended access list permit tcp any any eq 5963
outside-2 extended access list permit tcp any any eq ftp
outside-2 allowed extended access list tcp any any eq ftp - data
outside-2 extended access list permit tcp any any eq 3389
list of access outside-2 extended tcp refuse any any newspaper
2-outside access list extended deny ip any any newspaper
outside-2 extended access list deny udp any any newspaper
allow VPN CLIENTS to access extended list ip 172.17.2.0 255.255.255.0 10.0.254.0 255.255.255.0
allow VPN CLIENTS to access extended list ip 172.18.2.0 255.255.255.0 10.0.254.0 255.255.255.0
allow VPN CLIENTS to access extended list 192.168.123.0 ip 255.255.255.0 10.0.254.0 255.255.255.0
Standard access list VPNClient_splittunnel allow 172.17.2.0 255.255.255.0
Standard access list VPNClient_splittunnel allow 172.18.2.0 255.255.255.0
VPNClient_splittunnel list standard access allowed 192.168.123.0 255.255.255.0
VPNClient_splittunnel of access note list UK VPN Client pool
Standard access list VPNClient_splittunnel allow 172.255.2.0 255.255.255.0
VPN-Northwoods extended ip 172.17.2.0 access list allow 255.255.255.0 192.168.123.0 255.255.255.0
Note to outside_nat0_outbound to access list AD 01/05/13
access extensive list ip 10.0.254.0 outside_nat0_outbound allow 255.255.255.0 172.18.2.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
management of MTU 1500
mask 10.0.254.25 - 10.0.254.45 255.255.255.0 IP local pool VPNUserPool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (outside) 0-list of access outside_nat0_outbound
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 172.17.2.0 255.255.255.0
public static tcp (indoor, outdoor) interface smtp 172.17.2.200 smtp netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 82 172.17.2.253 82 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 81 192.168.123.253 81 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface https 172.17.2.10 https netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 172.17.2.10 imap4 imap4 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ldaps 172.17.2.10 ldaps netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 172.17.2.10 pop3 pop3 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface www 172.17.2.19 www netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 5963 172.17.2.108 5963 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ftp 172.17.2.7 ftp netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ftp - data 172.17.2.7 ftp - data netmask 255.255.255.255
static (inside, outside) tcp 3389 172.17.2.29 interface 3389 netmask 255.255.255.255
Access-group 2-outside-inside in external interface
Route outside 0.0.0.0 0.0.0.0 74.213.51.129 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server DCSI_Auth
AAA-server host 172.17.2.29 DCSI_Auth (inside)
key *.
AAA-server protocol nt AD
AAA-server AD (inside) host 172.16.1.211
AAA-server AD (inside) host 172.17.2.29
the ssh LOCAL console AAA authentication
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp - esp-sha-hmac trans_set
Crypto ipsec transform-set VPN-Client-esp-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto dynamic-map DYN_MAP 20 the value reverse-road
Crypto-map dynamic outside_dyn_map 20 game of transformation-VPN-Client
address for correspondence outside_map 20 card crypto VPN - UK
card crypto outside_map 20 peers set site2
card crypto outside_map 20 transform-set trans_set
address for correspondence outside_map 30 card crypto VPN-Northwoods
card crypto outside_map 30 peers set othersite
trans_set outside_map 30 transform-set card crypto
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
crypto ISAKMP policy 20
preshared authentication
the Encryption
md5 hash
Group 2
lifetime 28800
Telnet timeout 5
SSH timeout 60
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal Clients_vpn group strategy
attributes of strategy of group Clients_vpn
value of server DNS 10.0.1.30
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPNClient_splittunnel
domain.local value by default-field
the authentication of the user activation
tunnel-group VPNclient type remote access
tunnel-group VPNclient-global attributes
address pool VPNUserPool
authentication-server-group DCSI_Auth
strategy - by default-group Clients_vpn
tunnel-group VPNclient ipsec-attributes
pre-shared key *.
tunnel-group othersite type ipsec-l2l
othersite group tunnel ipsec-attributes
pre-shared key *.
tunnel-group site2 type ipsec-l2l
tunnel-group ipsec-attributes site2
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
class-map imblock
match any
class-map p2p
game port tcp eq www
class-map P2P
game port tcp eq www
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
type of policy-map inspect im bine
parameters
msn - im yahoo im Protocol game
drop connection
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the pptp
type of policy-card inspect http P2P_HTTP
parameters
matches the query uri regex _default_gator
Journal of the drop connection
football match request uri regex _default_x-kazaa-network
Journal of the drop connection
Policy-map IM_P2P
class imblock
inspect the im bine
class P2P
inspect the http P2P_HTTP
!
global service-policy global_policy
IM_P2P service-policy inside interface
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:7717a11f5f2dce11af0f35cee7b4c893
: end
Site2 Clients1 (172.18.2.0/24) (172.255.2.0/24)
ASA Version 8.2 (1)
!
names of
name 172.18.2.2 UKserver
!
interface Vlan1
nameif inside
security-level 100
IP 172.18.2.1 255.255.255.0
!
interface Vlan2
nameif GuestWiFi
security-level 0
IP 192.168.2.1 255.255.255.0
!
interface Vlan3
nameif outside
security-level 0
IP address site2 255.255.255.252
!
interface Ethernet0/0
switchport access vlan 3
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport trunk allowed vlan 1-2
switchport vlan trunk native 2
switchport mode trunk
Speed 100
full duplex
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
permit same-security-traffic intra-interface
Access extensive list ip 172.18.2.0 USER_VPN allow 255.255.255.0 172.255.2.0 255.255.255.0
Access extensive list ip 172.17.2.0 USER_VPN allow 255.255.255.0 172.255.2.0 255.255.255.0
Standard access list VPNClient_splittunnel allow 172.18.2.0 255.255.255.0
Standard access list VPNClient_splittunnel allow 172.17.2.0 255.255.255.0
Standard access list VPNClient_splittunnel allow 172.255.2.0 255.255.255.0
Outside_2_Inside list extended access permit tcp any host otherhost eq smtp
Outside_2_Inside list extended access permit tcp any host otherhost eq pop3
Outside_2_Inside list extended access permit tcp any host otherhost eq imap4
Outside_2_Inside list extended access permit tcp any host otherhost eq www
Outside_2_Inside list extended access permit tcp any host otherhost eq https
Outside_2_Inside list extended access permit tcp any host otherhost eq ldap
Outside_2_Inside list extended access permit tcp any host otherhost eq ldaps
Outside_2_Inside list extended access permit tcp any host otherhost eq nntp
Outside_2_Inside list extended access permit tcp any host otherhost eq 135
Outside_2_Inside list extended access permit tcp any host otherhost eq 102
Outside_2_Inside list extended access permit tcp any host otherhost eq 390
Outside_2_Inside list extended access permit tcp any host otherhost eq 3268
Outside_2_Inside list extended access permit tcp any host otherhost eq 3269
Outside_2_Inside list extended access permit tcp any host otherhost eq 993
Outside_2_Inside list extended access permit tcp any host otherhost eq 995
Outside_2_Inside list extended access permit tcp any host otherhost eq 563
Outside_2_Inside list extended access permit tcp any host otherhost eq 465
Outside_2_Inside list extended access permit tcp any host otherhost eq 691
Outside_2_Inside list extended access permit tcp any host otherhost eq 6667
Outside_2_Inside list extended access permit tcp any host otherhost eq 994
Outside_2_Inside access list extended icmp permitted an echo
Outside_2_Inside list extended access permit icmp any any echo response
Outside_2_Inside list extended access permit tcp any host site2 eq smtp
Outside_2_Inside list extended access permit tcp any host site2 eq pop3
Outside_2_Inside list extended access permit tcp any host site2 eq imap4
Outside_2_Inside list extended access permit tcp any host site2 eq www
Outside_2_Inside list extended access permit tcp any host site2 eq https
Outside_2_Inside list extended access permit tcp any host site2 eq ldap
Outside_2_Inside list extended access permit tcp any host site2 eq ldaps
Outside_2_Inside list extended access permit tcp any host site2 eq nntp
Outside_2_Inside list extended access permit tcp any host site2 eq 135
Outside_2_Inside list extended access permit tcp any host site2 eq 102
Outside_2_Inside list extended access permit tcp any host site2 eq 390
Outside_2_Inside list extended access permit tcp any host site2 eq 3268
Outside_2_Inside list extended access permit tcp any host site2 eq 3269
Outside_2_Inside list extended access permit tcp any host site2 eq 993
Outside_2_Inside list extended access permit tcp any host site2 eq 995
Outside_2_Inside list extended access permit tcp any host site2 eq 563
Outside_2_Inside list extended access permit tcp any host site2 eq 465
Outside_2_Inside list extended access permit tcp any host site2 eq 691
Outside_2_Inside list extended access permit tcp any host site2 eq 6667
Outside_2_Inside list extended access permit tcp any host site2 eq 994
Outside_2_Inside list extended access permit tcp any SIP EQ host site2
Outside_2_Inside list extended access permit tcp any range of 8000-8005 host site2
Outside_2_Inside list extended access permit udp any range of 8000-8005 host site2
Outside_2_Inside list extended access udp allowed any SIP EQ host site2
Outside_2_Inside tcp extended access list deny any any newspaper
Outside_2_Inside list extended access deny udp any any newspaper
VPN - USA 172.255.2.0 ip extended access list allow 255.255.255.0 172.17.2.0 255.255.255.0
access extensive list ip 172.18.2.0 inside_nat0_outbound allow 255.255.255.0 172.17.2.0 255.255.255.0
access extensive list ip 172.18.2.0 inside_nat0_outbound allow 255.255.255.0 172.255.2.0 255.255.255.0
access extensive list ip 172.255.2.0 inside_nat0_outbound allow 255.255.255.0 172.17.2.0 255.255.255.0
Comment by Split_Tunnel_List-list of access networks to allow via VPN
Standard access list Split_Tunnel_List allow 172.18.2.0 255.255.255.0
Standard access list Split_Tunnel_List allow 172.17.2.0 255.255.255.0
Standard access list Split_Tunnel_List allow 172.255.2.0 255.255.255.0
Standard access list Split_Tunnel_List allow 10.0.254.0 255.255.255.0
pager lines 20
Enable logging
monitor debug logging
debug logging in buffered memory
asdm of logging of information
Debugging trace record
Within 1500 MTU
MTU 1500 GuestWiFi
Outside 1500 MTU
IP pool local ClientVPN 172.255.2.100 - 172.255.2.124
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 172.18.2.0 255.255.255.0
NAT (GuestWiFi) 2 192.168.2.0 255.255.255.0
public static tcp (indoor, outdoor) interface smtp smtp UKserver netmask 255.255.255.255
public static tcp (indoor, outdoor) UKserver netmask 255.255.255.255 pop3 pop3 interface
public static tcp (indoor, outdoor) interface imap4 imap4 netmask 255.255.255.255 UKserver
public static tcp (indoor, outdoor) interface www UKserver www netmask 255.255.255.255
public static tcp (indoor, outdoor) https UKserver netmask 255.255.255.255 https interface
public static tcp (indoor, outdoor) interface ldap UKserver ldap netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ldaps ldaps netmask 255.255.255.255 UKserver
public static tcp (indoor, outdoor) interface nntp nntp netmask 255.255.255.255 UKserver
public static 135 135 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 102 102 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 390 390 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 3268 3268 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 3269 3269 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static UKserver netmask 255.255.255.255 993 993 interface tcp (indoor, outdoor)
public static UKserver 995 netmask 255.255.255.255 995 interface tcp (indoor, outdoor)
public static 563 563 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 465 465 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 691 691 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 6667 UKserver 6667 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 994 994 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
Access-group Outside_2_Inside in interface outside
Route outside 0.0.0.0 0.0.0.0 87.224.93.53 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Ray of AAA-server vpn Protocol
AAA-server vpn (inside) host UKserver
key DCSI_vpn_Key07
the ssh LOCAL console AAA authentication
Enable http server
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp - esp-sha-hmac trans_set
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map 20 transform-set trans_set
Crypto dynamic-map DYN_MAP 20 the value reverse-road
address for correspondence outside_map 20 card crypto VPN - USA
card crypto outside_map 20 peers set othersite2 site1
card crypto outside_map 20 transform-set trans_set
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
crypto ISAKMP policy 20
preshared authentication
the Encryption
md5 hash
Group 2
lifetime 28800
Telnet timeout 5
SSH timeout 25
Console timeout 0
dhcpd dns 8.8.8.8 UKserver
!
dhcpd address 172.18.2.100 - 172.18.2.149 inside
dhcpd allow inside
!
dhcpd address 192.168.2.50 - 192.168.2.74 GuestWiFi
enable GuestWiFi dhcpd
!
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
WebVPN
internal USER_VPN group policy
USER_VPN group policy attributes
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Split_Tunnel_List
the authentication of the user activation
tunnel-group othersite2 type ipsec-l2l
othersite2 group of tunnel ipsec-attributes
pre-shared-key *.
type tunnel-group USER_VPN remote access
attributes global-tunnel-group USER_VPN
address pool ClientVPN
Authentication-server group (external vpn)
Group Policy - by default-USER_VPN
IPSec-attributes tunnel-group USER_VPN
pre-shared-key *.
tunnel-group site1 type ipsec-l2l
tunnel-group ipsec-attributes site1
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:d000c75c8864547dfabaf3652d81be71
: end
Hello
The output seems to say that traffic is indeed transmitted to connect VPN L2L
Can you PING from hosts on the network 172.18.2.0/24 to the hosts on the network 172.17.2.0/24?
Have you tried several different target hosts on the network you are trying to ping while might exclude us actual devices are not just meeting the specifications these PINGs?
-Jouni
-
Routing with Cisco ASA 5520 VPN
I have installed IPsec vpn remote users in the Cisco ASA 5520 using RADIUS in my main network. Works very well. I have a site to my Cisco ASA5520 tunnels going to other sites, some of the tunnels have Cisco ASA and some have SonicWalls. I wish that my users VPN remote IPSec to be able to navigate in these tunnels is a site to access remote subnets attached to these tunnels. Do I need to use a combination of routing and the ACL? Or can I just use ACL only? Or just use routing only?
Thank you
Carlos
Hello
The key to set up here is the two ACL of VPN L2L end points that determine the 'interesting' traffic to connect VPN L2L. You will also need to confirm that the connection of the VPN Client is configured so that traffic to the remote sites have sent to the connection of the VPN client. There are also other things that you should check on your ASA plant
Here most of the things you usually have to confirm
- Set up 'permit same-security-traffic intra-interface' if it is already present in your configuration
- This setting will allow connections to form between the hosts that are connected to the same interface on the ASA. In this case, applies because the VPN client users are connected to the interface 'outside' of the ASA and also remote sites are connected to the ASA to "external". If the traffic between the remote VPN Client and VPN L2L sites will be to enter and exit the same interface
- You will need to check how the customer if configured VPN connection. Split or full Tunnel tunnel
- If the connection of the VPN Client is configured as Split Tunnel then you need to add all the networks from the remote to the Split Tunnel, so that the connections between the VPN Client is transmitted to the ASA and from there connections VPN L2L
- If the connection of the VPN Client is configured as full Tunnel, then there no problem that all traffic is transferred to the Client VPN connection all its assets
- Define the VPN pool in the ACL of VPN L2L
- You should make sure that the pool network VPN Client is defined in the ACL that define 'interesting' traffic to connect VPN L2L. So, you need to add the pool VPN VPN L2L configurations on the sites of Central America and remote control
- Configure NAT0 / NAT exempt for remote VPN Client to L2L VPN Site traffic at both ends of the VPN L2L
- You must ensure that the NAT0 / exempt NAT rules exist for the VPN Client for Remote Site traffic. This will have to be configured on the SAA "outside" interface. Format of configuration varies naturally a bit on the ASA Central his software level.
These should be the most common things to set up and confirm for traffic to flow between the VPN Client and Remote Sites
Hope this helps please rate if yes or ask more if necessary.
-Jouni
- Set up 'permit same-security-traffic intra-interface' if it is already present in your configuration
-
Need help - ASA 5520 VPN issues
Trying to simulate our in-lab recovery facility. I have 2 ASA 5520 who have a site - tunnel site between them.
That works fine
But I also have a requirement for remote access in one of the ASA, which formerly connected needs to route through
the site - tunnel site to another server on the other side.
So far the Remoting piece connects very well, I can access all networks connected locally but I can't seem to get the traffic
to move through the site - site of the tunnel on the other side.
Is this feasible? If so, if there are suggestions that would be appreciated.
See you soon
Dave
The command is not applied to a specific interface.
The command activate the feature on the ASA to receive traffic from VPN clients on the external interface and send him outside through the same apart from the interface through the tunnel L2L (and vice versa).
Federico.
-
Community support,
I want to run this question by you guys to avoid the sales of our partner CISCO and similar pitch more to the best solution that would give us what we want.
We currently have a VPN from CISCO 3020 hub to terminate the Lan-to-Lan tunnels and have our mobile workers to connect through the client VPN CISCO (300 users-employees and contractors).
Given that this device is coming to an end of LIFE this year, we bought a CISCO 5520 (here is the current licenses in this topic)
Licensing seems quite complicated, so here's my question:
-What VPN do you recommend for our users and entrepreneurs? I understand that the CISCO VPN client does not work with ASA 5500 Series devices
Is there a license needed to deploy a VPN solution for our remote users(employees/contractors)?
Thank you
John
The devices allowed for this platform:
The maximum physical Interfaces: unlimited perpetual
VLAN maximum: 150 perpetual
Guests of the Interior: perpetual unlimited
Failover: Active/active perpetual
VPN - A: enabled perpetual
VPN-3DES-AES: activated perpetual
Security contexts: 2 perpetual
GTP/GPRS: Disabled perpetual
AnyConnect Premium peers: 2 perpetual
AnyConnect Essentials: Disabled perpetual
Counterparts in other VPNS: 750 perpetual
Total VPN counterparts: 750 perpetual
Shared license: disabled perpetual
AnyConnect for Mobile: disabled perpetual
AnyConnect Cisco VPN phone: disabled perpetual
Assessment of Advanced endpoint: disabled perpetual
Proxy UC phone sessions: 2 perpetual
Proxy total UC sessions: 2 perpetual
Botnet traffic filter: disabled perpetual
Intercompany Media Engine: Disabled perpetualThis platform includes an ASA 5520 VPN Plus license.
Your understanding that the Cisco VPN client does not work with ASA is wrong. Maybe it's the version of Cisco VPN client that you use currently does not work with ASA. But these (and so not very new indeed) versions of VPN client work with the ASA. I installed for several clients who use the traditional IPSec VPN client with ASA ASAs and they work well.
You are right that the granting of licenses for the SAA is complicated. Your tunnels IPSec VPN site-to-site will work on the SAA and pose much challenge in terms of licenses. But there are problems and alternative solutions to consider for remote access VPN clients. At this point, there are two major variants: you can use the classic IPSec VPN client or you can use the new AnyConnect client. From a licensing perspective there is a Hugh difference between them. It is not special license that applies to the traditional IPSec client and they are just against your license for peers Total VPN (for which you have 750 in your license). For the AnyConect there is a condition of licence. There is a premium for AnyConnect license and there are licensed AnyConnect Essentials. The Essentials license price is much lower than the premium license, but Essentials does not all the features that made the premium.
In the immediate future, that it would sound like an easy question to answer, use the traditional IPSec VPN client for which theere is not a special permit and it is what you are used to. However Cisco has announced the dates of end of sale and end of Support for the traditional VPN client. If at some point you will need to use the AnyConnect client. I would say that if you make the change of the ASA that it might be a good choice to also adopt the AnyConnect client.
HTH
Rick
-
Configure the Cisco VPN client to pass through the VPN site-to-site (GUI)
Hello
I say hat the chain and responses I've seen to achieve this goal have been great...
https://supportforums.Cisco.com/discussion/12234631/Cisco-ASA-5505-VPN-p...
and
https://supportforums.Cisco.com/document/12191196/AnyConnect-client-site...
My question is "we will get this configuration by using the graphical user interface for someone who is not notified about the command line?"
Thank you
Of course, all this can be configured via ASDM.
Looking at the second example you posted above, they point you first change:
ACL split of the tunnel for the AnyConnect customer
This Configuration > remote access VPN > network (Client) access > AnyConnect connection profile > (chose the profile and select Edit) > (choose "Manage" next to group policy) > Edit > advanced > Split Tunneling > ensure that the policy does not "Inherit" but rather "Tunnel network list below" > Unselect "Inherit" next to the network list, then 'manage '. Enter your networks you want in the GUI in this dialog box. Click OK all the way back to the main window ASDM and click on apply.
You then change:
Crypto ACL for the tunnel from Site to Site
To do this, go to Configuration > VPN Site-to_site > connection profiles > (choose your profile and select edit) > add the VPN client address pool to the list of local network between protect networks. Yet once, click OK all the way back to the main window ASDM and click on apply.
Then, allow the
ASA to redirect back on the same interface traffic it receives
.. is defined under Configuration > Device Setup > Interfaces. (check the box at the bottom of this screen). Click on apply
Finally, there is the NAT exemption. For which go to Configuration > firewall > rules NAT. Add a NAT device rule before rules network object with Interface Source out, Source address your address pool VPN, the Destination address to include remote subnets and Action is Static Source NAT type source address and destination address remaining as original (i.e. without NAT). Once on OK all the way back to the main window ASDM and click on apply. Save and test.
Good luck. Don't forget to note the brand and posts useful when your question is answered.
Maybe you are looking for
-
Hi, I m Safeer hashim of Multan in Pakistan. I m using i6, a problem occurred at u2 ic dat here. I havnt used any charger or usb drive, using the cable Moose dob nd, did not understand y it corrupt?Please suggest me dat apple help in this case?
-
How can I stop firefox from asking me to connect to sync
I like to use sync but I want to only use it WHEN I want to use. I don't have Firefox ask me whenever I open it, to log synchronization (Sync met an error during the synchronization... will automatically try again...) "whenever I open Firefox. Is the
-
New tab opening reveals a not empty address for trovi - how can I do come in white?
Clicking on + for a new tab brings up a new window with year address for "www.trovi.com/?gd= & ctid = CT3330390 & octid = EB_ORIGINAL_CTID & ISID = ME5D94D35-C1CF-4725-BACA-FCAEC896C9CE & SearchSource = 69 & CUI = & SSPV = & Lay = 1 & UM = 6 & UP = S
-
graphics card for HP Pavilion 500-210qe
I'll be able to add a graphics card to this model? Also, I would like to add another hard drive.
-
How can I use an accelerometer on a cRio 9012 with the NI 9233 module?
I'm putting in place a system of vibration using a search of wilcoxon accelerometer 797-33. Is there some setting you have to light to light the target NOR? I used the getting started with the example of 9233 as base. However, it will only read 0, wh