VPN client - supported by Windows XP Tablet PC?

Similar Questions

• Cisco851 could act as a client as vpn client built-in Windows l2tp

  Hello

  Cisco851 could act as a client as vpn client built-in Windows l2tp? I want a cisco851 to connect to a Linux L2TP server. Is this feasible?

  Appreciate your help.

  Possible.

  This link should help you

  http://www.Cisco.com/en/us/products/SW/iosswrel/ps5207/products_feature_guide09186a00801a7592.html

• What is a VPN solution that is more stable than IPSEC VPN? What is the latest version of VPN client recommended for Windows 7 & 8 users?

  Hello

  I would like to ask a few details & concerns on our existing VPN configuration.

  1. What is the Cisco VPN client recommended for users of Windows 7 and 8? Is there an official documentation for this Cisco? We currently use customer VPN Ciso 5.0.7.

  2. we are running IPSEC VPN with only 1 gateway & only local authentication (No ACS) for our client. Recently, we have some concerns that they are the VPN connection is down. Whereas if I'm the one connected to the VPN, my connection is stable. Is there any point that we must consider up in the network. Is there a better configuration or solution that we could recommend to the customer as SSL VPN?

  3. If you want to use SSL VPN anyconnect secure mobility & we want to implement redundancy on the FW, how will the license work?

  Thank you!

  An AnyConnect-based VPN is the replacement recommended for remote IPsec VPN access. (source)

  AnyConnect can use SSL or IPsec (IKEv2) for transport.

  For an ASA redundant firewalls (running 8.3 (1) or later) any permit required AnyConnect are shared between them. that is, you just buy licenses for a member of the HA pair. (source)

• How to connect to the CISCO VPN server without using the CISCO VPN client (from dialog Windows VPN)

  Hello world

  I have a cisco router 2800 installed in our company
  and I have it configured as a VPN server for professional help (cisco configuration)
  with the ease of the VPN Server Wizard
  Can I connect to this server using windows XP or 7 dialog VPN?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers community. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps!

• Binds two ISP ASA to remote VPN Client to connect to instead of creating two profiles on the remote client

  Hello

  just a quick,

  TOPOLOGY

  ASA isps1 - 197.1.1.1 - outside

  ASA ISP2 - 196.1.1.1 - backup

  LAN IP - 192.168.202.100 - inside

  I have configured Tunnel on the interfaces (external and backup), but is to link both legs public to serve a thare as redundancy for vpn users and users of the vpn tunnel leave pointing inside IP whenever they want to establish vpn sssion, we want it to be one, so if an interface fails vpn users will not know , but he will try the second for the connection. instead of creating the profile for the two outside of the leg on the vpn client.

  is this possible?

  Hi Rammany.

  In your case, you have only an ASA that connects with 2 ISP in another segment IP... 196.x.x.x (Link1) & 197.x.x.x (Link2). What your condition is you want to have the VPN client who must be consulted with backup. If 196.x.x.x link fails, it should automatically take 197.x.x.x link. That too we should not have the config set in the VPN client backup server. You don have the possibility of having standby active also in asa single.

  I think n so it will work with your current design.

  This option is if your VPN client supports host name resolution (DNS). You can have the VPN created for both the public IP address share the same host name keeping the bond as the primary address 1 and 2 a secondary address. It will work alone.

  Hope someother experts in our forum can help you with that.

• Receive message "Validation of C:\WINDOWS\System32\VSINIT.dll failure" error message when trying to run Cisco VPN Client.

  windows\system32\vsinit.dll

  I try to run CISCO "VPN Client" connect from my PC at home for my work PC.

  Then, I get a message:

  Validation failed for C:\WINDOWS\System32\VSINIT.dll

  Any ideas?

  Martin

  Hello

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro

• Using Cisco VPN Client in Windows 7 Professional 64 bit

  Hi all!
  I need to use Cisco VPN Client to connect to my server in the company, because my company uses lotus notes Server, I have to connect Cisco VPN to access e-mail. But now my windows version is Windows 7 Pro 64 bits that cannot directly install this application, I already installed XP Mode and creatde shortcut to Windows 7, I plugged the Cisco VPN to my Cisco VPN server, but I can not access the server, Pls help me and show me how to solve this problem

  Open the XP VM itself, do not use the shortcut that was published in
  the W7 boot menu. You need to install Outlook / your email client
  Inside the virtual machine, as well as on the side of W7. You can point to the same
  PST files if you have local PST files, but you just can't open them in
  at the same time of W7 and XP VM.

  There is no way to bridge using the shortcut of publishing app

  Some people have reported success with the third party IPSec
  replacements as customer universal shrew or the NCP. Your IT Department.
  would like to know if these are supported

  :

  > Hello all! I need to use Cisco VPN Client to connect to my server in the company, because my company uses lotus notes Server, I have to connect Cisco VPN to access e-mail. But now my windows version is Windows 7 Pro 64 bits that cannot directly install this application, I already installed XP Mode and creatde shortcut to Windows 7, I plugged the Cisco VPN to my Cisco VPN server, but I can not access the server, Pls help me and show me how to solve this problem
  Barb Bowman www.digitalmediaphile.com

• Windows 10 anyconnect vpn client

  Can someone please explain to me how to download the windows client to vpn anyconnect 10 on my asa 5516 9.5 version and configure the asa for windows 10 clients? Any help would be greatly appreciated.

  Thank you

  Lake

  Hello Lakeram,

  It's the same process, you must download the AnyConnect that is officially supported by Windows 10, as you can see below:

  AnyConnect 3.1MR10 (3.1.10010) and later are compatible with Windows 10 official release. Technical assistance Center (TAC) will be available from 29/07/2015.

  Download package on the flash of the ASA and the move to the WebVPN as image for Windows, and then configure the Tunnel Group, group policy and the XML profile, please follow the guide below:

  - http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyc...

  - http://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mob...

  Those two will help you to properly, configure the AnyConnect

  Keep me posted, please note and mark it as correct the useful message

  David Castro,

• Cisco VPN Client with Windows 7 Home Premium 64-bit

  I recently bought a new laptop with Windows 7 Home Premium 64-bit.   I need to connect to a VPN IPSEC to work.  I tried the current VPN client and after reading the posts in this group, I tried vpnclient-win-msi-5.0.07.0240-k9-BETA.exe.  When I tried to install the beta version, I get the following error message:

  Error 28011: Windows 64-bit is not supported by Cisco Systems VPN Client 5.0.07.0240.

  Any suggestion would be appreciated.

  Hello

  You should download the 64-bit version. vpnclient-winx64-MSI-5.0.07.0240-K9-Beta.exe is the version you tried to install the 32-bit version

  Thank you

  John

• How to use Windows 7 64-bit cisco vpn client?

  Hello

  I want to use the cisco vpn client to connect to my Institute.

  I use Windows 7 64-bit edition Home premium.

  I tried several options, but nothing has worked.

  Please suggest me the correct procedure to run on my Windows 7 64 bit Home Premium Cisco vpn client.

  Thanks in advance,

  Federico

  VPNclient is not yet supported on 64-bit windows.

  However, there is a beta version of the next 5.0.7 version that does.

  Have you tried this version? If so, what are the exact symptoms?

  Edit: you can download the 5.0.7 beta here

• Windows IPSEC and SSL VPN client on the same machine

  Matches (coexistence) installation of IPSEC and SSL vpn clients that are supported on the same computer, windows (XP and Win7)?

  As mentioned by Patricia and Jennifer (5 stars), you can install two clients on the same machine without any problem.

  The tricky part comes when you are trying to connect two clients at the same time, that's when you may encounter unexpected problems.

  However, if your intention is to install both clients and connect them individually and not at the same time, you'll be fine.

  If you have any other questions, please mark this question as answered and note all messages that you have found useful.

  Thank you.

  Portu.

  Post edited by: Javier Portuguez

• Cisco VPN Client for Windows 7 and WWAN devices

  Hello

  Does anyone know when Cisco will release a VPN Client for Windows 7 update that supports devices WWAN using NDIS 6.2?

  Thank you

  Dave,

  End of the client VPN of life was announced. In my view, it is safe to say that no new features will be introduced.

  AnyConnect is the way to go (Alternatively Windows 7's native IKEv2 connection works in IOS).

  Marcin

• Cisco VPN Client causes a blue screen crash on Windows XP Pro (Satellite M30)

  Hello

  I have a Satellite Pro M30 running Windows XP Professional.

  After you start a vpn Tunnel via a customer of Cisco VPN (Version 4.6 and 4.7), the system crashes with a blue screen.

  I see that the key exchange is successful, but immediately after the vpn connection is established Windows XP crashes with a blue screen.

  Someone has any idea how to solve this problem?

  Perhaps by the updated device driver? And if so, which driver should be updated?

  Kind regards

  Thorsten

  Hello

  Well, it seems that the Cisco client is a problem.
  I m unaware of this product because it of not designed by Toshiba.
  I think that the drivers are not compatible with the Windows operating system.
  However, I found this site troubleshooting cisco vpn client:
  Please check this:
  http://www.CITES.uiuc.edu/wireless/trouble-index.html

• Windows Server 2012 R2 Standard Radius Client support

  Hi team,

  In 2012 R2, the NPS Service server used for authentication. It uses the Radius Clients as authenticator. There is no online documents about the number of clients supported by the Windows Server 2012 R2 Standard Edition and Datacenter. Might well want to mention the number of clients supported by the version

  Thank you

  Sudhakar

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Professional Windows Vista crashes when you use Cisco VPN Client 5.05.0290

  I have a Dell Latitude E6400 Windows Vista Business (32 bit) operating system. When I go to turn on the VPN client, I get invited to my username / password and once entered, the system just hangs. The only way to answer, it's a re-start. I took action:

  1 disabled UAC in Windows
  2 tried an earlier version of the VPN client
  3. by the representative of Cisco, I put the application runs as an administrator

  If there are any suggestions or similar stories, I would be grateful any offereings.

  It IS the COMODO Firewall with the 5.0.x CISCO VPN client that causes the gel. The last update of COMODO has caused some incompatibility. I tried to install COMODO without the built in Zonealerm, but it is still frozen. The only way to solve it is to uninstall COMODOD. Since then, my CISCO VPN client works again...