VPN Ipsec with Fortinet
can someone show me a vpn ipsec with other vendors Cisco router VPN link to? i.e. www.fortinet.com. Thank you very much.
Go to the following URL...
1 Fortigate to Cisco
'http://kc.forticare.com/default.asp?id=229&Lang=1'.
2 W2K for Cisco
'http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800b12b5.shtml'.
3 control point for Cisco
'http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094ac4.shtml'.
4 Netscreen to Cisco
'http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801c4445.shtml'.
Tags: Cisco Security
Similar Questions
-
IOS router VPN Client (easy VPN) IPsec with Anyconnect
Hello
I would like to set up my router IOS IPsec VPN Client and connect with any connect.
Is it possible to configure an IPSec and SSL VPN Client on IOS router? I use for example a 1841.It would be perfect to give the user the choice of SSL or IPSec protocol. And the user needs that the Anyconnect Client.
I think it's possible with a Cisco ASA. But I can also do this with an IOS router?
Please let me know how if this is possible.
Also is it true that the IOS routers are not affected to hear bug bleed? SSL VPN and SSL VPN with Anyconnect page is also save?
http://Tools.Cisco.com/Security/Center/content/CiscoSecurityAdvisory/CIS...
But I am in any way interested in using IPSec and SSL VPN on a router IOS...
It's true - CCP does not yet offer the options to configure a VPN IPsec with IKEv2.
The configuration guide (here) offers detailed advice and includes examples of configuration.
-
need help with VPN IPSEC with RV042
https://supportforums.Cisco.com/docs/doc-30883
I enjoy any support for a trial with RV042 VPN IPSec game please.
Thanks in advance.
Hi Bay, if you use a Windows computer, you can use QuickVPN. The only thing to note is the router that you have as the gateway to the RV042. You must define a port forward for all IPsec services be able to overcome the problems with the NAT device.
RV042 configuration is easy, create a name of user and password and that's it. The problem/challenge will get your NAT connection to allow VPN pass.
-Tom
Please mark replied messages useful -
VPN IPSec with no. - Nat and Nat - No.
On a 6.3 (5) PIX 515 that I currently have an IPSec VPN configured with no. - nat, using all public IPs internally and on the remote control. Can I add two hosts to the field of encryption that have private IP addresses and NAT to the same public IP in the address card Crypto? What commands would be involved in this?
Current config:
-------
ipsectraffic_boston list of allowed access host ip host PublicIP11 PublicIP1
ipsectraffic_boston list of allowed access host ip host PublicIP22 PublicIP2
outside2_outbound_nat0_acl list of allowed access host ip host PublicIP PublicIP
card crypto mymap 305 correspondence address ipsectraffic_boston
mymap 305 peer IPAdd crypto card game.
mymap 305 transform-set ESP-3DES-SHA crypto card game
life card crypto mymap 305 set security-association seconds 86400 4608000 kilobytes---------
I would add two IP private to the 'ipsectraffic_boston access-list' and have NAT to a public IP address, as the remote site asks that I don't use the private IP. This would save the effort to add a public IP address to my internal host.
Thank you
Dan
Hello
If for example you have an internal host 192.168.1.1 and you want NAT public IP 200.1.1.1 it address
You can make a static NAT:
(in, out) static 200.1.1.1 192.168.1.1
And include the 200.1.1.1 in crypto ACL.
Federico.
-
Gents,
This is my first post ever here, on this platform, I have a problem to Setup GRE tunnel with IPSEC with OSPF tunnel... I have 2 sites connected to my HQ (Media is VSAT). I want all the encriptación data + Multicast Ospf enabled...
Can I do it with DWVPN using SDM - I did a single document to this topic but its all about IEGRP OSPF not...
Anyone please help me with this problem... If anyone NEED any other information please update me... I'll be happy to do...
Thanking you in anticipation.
Tabuk router is misconfigured:
defined by peer 172.31.111.93
This should be
defined by peer 172.31.111.97
Concerning
Farrukh
-
Problem creating a VPN IPSec with SRP527W
Hello.
I have a Setup like this:
192.168.15.0/24 SRP527W <->internet <->ROUTER [172.16.16.1] <1:1 nat="">pfSense (raccoon vpn server) [172.16.16.2] 192.168.55.0/24
I set up a VPN between the SRP and pfsense connection but the connection is not established because that timeout of the phase 1. According to racoon on the remote side does not.
Before that, I've properly established a VPN between the SRP and another box of pfsense, but with a public IP address. The same host, I have an another vpn to the pfsense box (172.16.16.1) works correctly.
These parameters of the PRS:
IKE policy:
Exchange mode: aggressive
Permit ID: manual
Remote ID: 172.16.16.2
Encryption: 3DES
Authentication: MD5
DH: Group 2
PSK: mysharedkey
DPD: disabled
IPSec policy:
Policy type: police car
Remote end point: IP ADDRESS
IP: 172.16.16.2
Life expectancy: 7800
Set local subnet and remote according to the above (192.168.x.x) Network Setup.
How can I check what is the problem? I struggled for several hours now and have failed to go out again! Any help really welcome!
Thank you
Lorenzo,
The router to 172.16.16.1 allows all traffic to the pfsense VPN server when specific NAT is enabled or you have create access rules? My guess is that the router is blocking the traffic.
-Marty
1:1>->-> -
ASA5510, 8.0.x
I need to set up a VPN from Site to Site (L2L) in a remote location.
The remote IT consultant asks me NOT to go out with my real (pulbic), IP address, but translated to a single IP address.
From my side, I have a 24 network, on the remote site, I have to reach only 4 IP addresses.
The VPN is one way only: I need to reach their servers, but not vice versa.
I tried to follow the document ID-99122 (http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml), but it seems not to work with a static NAT to a translated 24 on a single IP address.
I tried to ask them to allow me to NAT a 24, but they disagree.
Any solution?
Kind regards
Claudio
Hello
If I understand, you want to translate your 24 network to IP address dynamic PAT unique when contacting the remote site only via VPN L2L.
For this, you can try to use the PAT political dynamics
access-list L2LVPN - POLICYNAT note define traffic for the political dynamics for VPN L2L PAT
L2LVPN-POLICYNAT ip 10.10.10.0 access list allow 255.255.255.0 host 1.1.1.1
L2LVPN-POLICYNAT ip 10.10.10.0 access list allow 255.255.255.0 host 1.1.1.2
L2LVPN-POLICYNAT ip 10.10.10.0 access list allow 255.255.255.0 host 1.1.1.3
L2LVPN-POLICYNAT ip 10.10.10.0 access list allow 255.255.255.0 host 1.1.1.4
Global 200 (outside)
NAT (inside) 200 access-list L2LVPN-POLICYNAT
Also of course your L2L Crypto VPN ACL map should look like this
access-list L2LVPN-CRYPTOMAP Note set encryption to connect VPN L2L domain
access-list L2LVPN-CRYPTOMAP allowed ip 1.1.1.1 host
access-list L2LVPN-CRYPTOMAP allowed IP host 1.1.1.2
access-list L2LVPN-CRYPTOMAP allowed IP host 1.1.1.3
access-list L2LVPN-CRYPTOMAP allowed IP host 1.1.1.4
crypto card matches the address L2LVPN-CRYPTOMAP
Where
- 10.10.10.0/24 = is your souce LAN network
- 1.1.1.1 - 4 = are the remote end 4 hosts, you must contact by the VPN L2L
- PAT = IP is the IP address assigned by the remote end to be used with VPN L2L
Hope this helps
EDIT: Copy/paste strikes again. I had both the ACL with the same name. Which corrected.
-Jouni
-
Setup for use with Cisco Anyconnect VPN IPsec
So, I had trouble setting up VPN on our ASA 5510. I would use IPsec VPN so that we don't have to worry about licensing issues, but what I have read you can do with and always use Cisco Anyconnect. My knowledge on how to set up VPN especially in iOS version 8.4 is limited, so I've been using a combination of command line and ASDM.
I am finally able to connect from a remote location, but once I log in, nothing else works. What I've read, you can use IPsec for client-to-lan connections. I use a pre-shared for this. Documentation is limited on what should happen after have connected you? Shouldn't be able to local access on the vpn connection computers? I'm trying to implement work. If I have VPN from home, should not be able to access all of the resources at work? According to me, because I used the command-line as ASDM I confused some of the configuration. In addition, I think that some of the default policies are confused me too. So I probably need a lot of help. Here is my current setup with the changed IP address and other things that are not related to deleted VPN.
NOTE: We are still testing this ASA and is not in production.
Any help you can give me is greatly appreciated.
ASA Version 8.4 (2)
!
ASA host name
domain.com domain name
!
interface Ethernet0/0
nameif inside
security-level 100
the IP 192.168.0.1 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 50.1.1.225 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
No nameif
security-level 100
IP 192.168.1.1 255.255.255.0
!
boot system Disk0: / asa842 - k8.bin
passive FTP mode
DNS domain-lookup outside
DNS server-group DefaultDNS
!
permit same-security-traffic intra-interface
!
network of the NETWORK_OBJ_192.168.0.224_27 object
subnet 192.168.0.224 255.255.255.224
!
object-group service VPN
ESP service object
the purpose of the tcp destination eq ssh service
the purpose of the tcp destination eq https service
the purpose of the service udp destination eq 443
the destination eq isakmp udp service object
!
allowed IP extended ip access list a whole
!
mask 192.168.0.225 - 192.168.0.250 255.255.255.0 IP local pool VPNPool
no failover
failover time-out period - 1
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 645.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.0.224_27 NETWORK_OBJ_192.168.0.224_27 non-proxy-arp-search to itinerary
!
the object of the LAN network
NAT dynamic interface (indoor, outdoor)
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 50.1.1.250 1
Sysopt noproxyarp inside
Sysopt noproxyarp outdoors
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ASA
Configure CRL
crypto ca server
Shutdown
string encryption ca ASDM_TrustPoint0 certificates
certificate d2c18c4e
864886f7 0d06092a c18c4e30 308201f3 3082015c a0030201 d 020204 2 0d 010105
0500303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609
02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109
3131 31303036 31393133 31365a 17 323131 30303331 39313331 0d 170d 6f6d301e
365a303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609
02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109
6f6d3081 9f300d06 092 has 8648 86f70d01 01010500 03818d b 30818902-00-818100-2
8acbe1f4 5aa19dc5 d3379bf0 f0e1177d 79b2b7cf cc6b4623 d1d97d4c 53c9643b
37f32caf b13b5205 d24457f2 b5d674cb 399f86d0 e6c3335f 031d54f4 d6ca246c
234b32b2 b3ad2bf6 e3f824c0 95bada06 f5173ad2 329c28f8 20daaccf 04c 51782
3ca319d0 d5d415ca 36a9eaff f9a7cf9c f7d5e6cc 5f7a3412 98e71de8 37150f02
03010001 300 d 0609 2a 864886 f70d0101 05050003 8181009d d2d4228d 381112a 1
cfd05ec1 0f51a828 0748172e 3ff7b480 26c197f5 fd07dd49 01cd9db6 9152c4dc
18d0f452 50f5d0f5 4a8279c4 4c1505f9 f5e691cc 59173dd1 7b86de4f 4e804ac6
beb342d1 f2db1d1f 878bb086 981536cf f4094dbf 36c5371f e1a0db0a 75685bef
af72e31f a1c4a892 d0acc618 888b53d1 9b 888669 70e398
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 10
Console timeout 0
management-access inside
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2
AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3
profiles of AnyConnect VPN disk0: / devpn.xml
AnyConnect enable
tunnel-group-list activate
internal VPN group policy
attributes of VPN group policy
value of server WINS 50.1.1.17 50.1.1.18
value of 50.1.1.17 DNS server 50.1.1.18
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
digitalextremes.com value by default-field
WebVPN
value of AnyConnect VPN type user profiles
always-on-vpn-profile setting
privilege of xxxxxxxxx encrypted password username administrator 15
VPN1 xxxxxxxxx encrypted password username
VPN Tunnel-group type remote access
General-attributes of VPN Tunnel-group
address (inside) VPNPool pool
address pool VPNPool
LOCAL authority-server-group
Group Policy - by default-VPN
VPN Tunnel-group webvpn-attributes
enable VPN group-alias
Group-tunnel VPN ipsec-attributes
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
class-map ips
corresponds to the IP access list
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the http
class ips
IPS inline help
class class by default
Statistical accounting of user
I would recommend buy AnyConnect Essentials. The cost of the license is nominal - list of US $150 for the 5510. (piece number L-ASA-AC-E-5510 =)
Meawwhile you can use the Cisco VPN client inherited with IKEv1 IPSec remote access VPN using profiles *.pcf.
I believe you can also use the client Anyconnect client SSL or DTLS transport access remotely (non-IPsec) without having to buy the license Anyconnect Essentials for your ASA focus.
As an aside, note that if you want to use AnyConnect Mobile (e.g. for iPhone, iPad, Android, Blackberry etc.clients) you will also get the additional license for it (L-ASA-AC-M-5510 =, also price US $150)
-
How to establish a tunnel vpn ipsec using DNS with ASA 5505?
Hello
I m get a dynamic IP address public and what I m trying to do is establish a tunnnel remote vpn using IPSec, which I realize my provider but each time resets of sessions or ASA 5505 reset, I get a new public IP and I need to put the new IP address on the remote client, so I can establish the vpn...
How can I establish a vpn ipsec using DNS? For this scenario, the remote client vpn is a vpn phone, but it could be any vpn client.
Private private Public IP IP IP
PBX - Telephone (LAN) - ASA 5505-(Internet)-(router) Remote Site-(LAN) VPN-
Kind regards!
Ah ok I see, Yes in this case there is no that you can do other than request a static IP address from your ISP.
Kind regards.
PS: Don't forget to mark this question as answered. Thank you!
-
Client OS VPN works with routers RV042G?
I bought a RV042G, but the documentation makes no reference that this router supports Mac OS x 10.8 or any other OSX version.
Client OS VPN works with routers RV042G?
I appreciate any response.
Hi Marcos, Yes, for PPTP. IPsec built in does not work by default as is the 'same' as the Cisco VPN 5.x.
-Tom
Please evaluate the useful messages -
Hi all
I have 3 sites, the main site has a cisco firewall mikrotik router.
There is a vpn ipsec existing between the cisco router and another router cisco on the site of the 2nd and it works well.
Now, I've added an another vpn between a 3rd site and main site. The router on the 3rd site is a mikrotik firewall.
I had the vpn on the main site and the 3rd site where the mikrotik firewall is and it worked well.
then for some reason, the vpn with the 3rd site has failed and I could not get it working again.
When looking for answers, I see that the vpn for the 3rd site States the following:
#pkts program: 46, #pkts encrypt: 46, #pkts digest: 46
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0It seems that no traffic is coming back to the cisco
I also found the following output below to diagnose the problem.
It seems that there is communication, but if I read this right, it looks like the cisco established a new number but the other end is not the new number
new node-1868419487
node-1868419487 error suppression FALSE "Information (in) condition 1" pattern
Any help would be appreciated.
* 02:49:51.911 Jul 22: ISAKMP: (2060): purge the node-1140469772
* 02:49:59.723 Jul 22: ISAKMP: DPD received message KMI.
* 02:49:59.723 Jul 22: ISAKMP: node set 1053074288 to QM_IDLE
* 02:49:59.723 Jul 22: ISAKMP: (2060): Protocol for sending INFORMER DPD/R_U_THERE 1
SPI 2273844328, message ID = 1053074288
* 02:49:59.723 Jul 22: ISAKMP: (2060): seq. no 0x645EC368
* 02:49:59.723 Jul 22: ISAKMP: (2060): my_port of x.x.x.127 package sending 5
peer_port 00 500 (R) QM_IDLE
* 02:49:59.723 Jul 22: ISAKMP: (2060): sending a packet IPv4 IKE.
* 02:49:59.723 Jul 22: ISAKMP: (2060): purge the node 1053074288
* 02:49:59.767 Jul 22: ISAKMP (2060): packet received dport x.x.x.127
500 sport Global 500 (R) QM_IDLE
* 02:49:59.767 Jul 22: ISAKMP: node set-1868419487 to QM_IDLE
* 02:49:59.771 Jul 22: ISAKMP: (2060): HASH payload processing. Message ID = 24265
47809
* 02:49:59.771 Jul 22: ISAKMP: (2060): treatment of the NOTIFY DPD/R_U_THERE_ACK protoco
l 1
0, message ID SPI = 2426547809, a = 0x8705F854
* 02:49:59.771 Jul 22: ISAKMP: (2060): DPO/R_U_THERE_ACK received from the peer 125,23
6.211.127, sequence 0x645EC368
* 02:49:59.771 Jul 22: ISAKMP: (2060): node-1868419487 FALSE reason for deletion error
"Information (in) condition 1"
* 02:49:59.771 Jul 22: ISAKMP: (2060): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
* 02:49:59.771 Jul 22: ISAKMP: (2060): former State = new State IKE_P1_COMPLETE = IKE
_P1_COMPLETE
* 02:50:01.111 Jul 22: ISAKMP: (2060): purge the node-1201068805
Comparing encrypt of 46 to 47436 counters, it seems that router is ecncrypting the traffic, but we do not get any interesting traffic on the remote side.
Most likely, you might want to check on the remote site, if you see counters increment in parallel decryption and encryption of the counters are incrementing or not.
On the router IOS, if are incrementing counters encrypt, and confirm that you have not any tunnel existing before the router can be seen same proxy IDs, which is already negotiated with other peer.
Finally, please make sure that the ESP, 50 protocol traffic is not blocked in transit.
I hope this helps.Kind regards
Dinesh MoudgilPS Please rate helpful messages.
-
Hello
During the configuration of IPSEC with CA authentication. We have to install two certificates on ASA - identity certificate and the certificate of the CA. I did not really understand these notion of certificate of towing.
Please share the experience of any explanation link / URL is very significant.
Attach here the Cisco document that we are referring to the configuration.
(This paper shows the installation of these two - identity and CA certificate).
Thanks in advance.
Subodh
Subodh
2 certificates are different things-
(1) identity certificate identifies the real device. So when your firewall implements one VPN with another firewall identity certificate is that your firewall uses to identify itself.
(2) the CA is a certificate issued by a certification authority (CA). This CA can be a public CA such as Versign, or it can be your own internal CA.
The idea behind a certification authority is that someone should be able to tell if a certificate is valid or not. So when your firewall sends its certificate of identity to a 3rd party how this thrid party knows he sent certificate is valid and is your firewall. Here comes the CA.
Basically a public CA such as Versign act as an independent body that says whether or not identity certificates are valid. Of course, this means that all parties must trust Verisign. When the 3rd party firewall receives your identification certificate it will be a string of included certificate that will point to Verisign. If the third-party firewall then can "ask" If Verisign certificate is correct or not.
Jon
-
Configuration of the client VPN IPSEC IOS question
Hello all, I just can't get my IOS Firewall to accept a client based vpn IPSEC connection. The Cisco client comes to expiration and Im never disputed a username and password. I checked my group and a pre-shared on the client and the router. I put my relevant config below. Any help would be greatly appreciated.
version 12.4
boot system flash: uc500-advipservicesk9 - mz.124 - 24.T.bin
AAA new-model
!
!
AAA authentication login default local
radius of group AAA authentication login userauthen
AAA authorization exec default local
radius of group AAA authorization network groupauthor
inspect the IP tcp outgoing name
inspect the IP udp outgoing name
inspect the name icmp outgoing IP
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto SMOVPN
key xxxxx
DNS 192.168.10.2
business.local field
pool vpnpool
ACL 108
Crypto isakmp VPNclient profile
match of group identity SMOVPN
client authentication list default
Default ISAKMP authorization list
client configuration address respond
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
Define VPNclient isakmp-profile
market arriere-route
!
!
map clientmap client to authenticate crypto list userauthen
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
interface FastEthernet0/0
IP 11.11.11.10 255.255.255.252
IP access-group outside_in in
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the outgoing IP outside
IP virtual-reassembly
automatic duplex
automatic speed
clientmap card crypto
IP local pool vpnpool 192.168.109.1 192.168.109.254
IP nat inside source list 1 interface FastEthernet0/0 overload
outside_in extended IP access list
permit tcp object-group Yes_SMTP host 11.11.11.10 eq smtp
allow any host 74.143.215.138 esp
allow any host 74.143.215.138 eq isakmp udp
allow any host 74.143.215.138 eq non500-isakmp udp
allow any host 74.143.215.138 ahp
allow accord any host 74.143.215.138
access-list 1 permit 192.168.10.0 0.0.0.255
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 108 allow ip 192.168.109.0 0.0.0.255 192.168.10.0 0.0.0.255
access-list 108 allow ip 192.168.109.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 108 allow ip 192.168.109.0 0.0.0.255 10.1.10.0 0.0.0.255
Here are a few suggestions:
change this:
radius of group AAA authorization network groupauthor
for this
AAA authorization groupauthor LAN
(unless you use the group permission for your radius server you need local)
Choose either on ISAKMP profiles and if you decide to go with and then get rid of these lines:
map clientmap client to authenticate crypto list userauthen
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap crypto answer
AND change the following items on your profile isakmp:
Crypto isakmp VPNclient profile
ISAKMP authorization list groupauthor
Also if you'll use a list for user authentication, I advise you to avoid using the default list so go ahead and change it too much under the isakmp profile
client authentication list userauthen.
If you do not use isakmp profiles change the following:
No crypto isakmp VPNclient profile
Crypto-map dynamic dynmap 10
No VPNclient set isakmp-profile
-
Cisco VPN Client with Windows 7 Home Premium 64-bit
I recently bought a new laptop with Windows 7 Home Premium 64-bit. I need to connect to a VPN IPSEC to work. I tried the current VPN client and after reading the posts in this group, I tried vpnclient-win-msi-5.0.07.0240-k9-BETA.exe. When I tried to install the beta version, I get the following error message:
Error 28011: Windows 64-bit is not supported by Cisco Systems VPN Client 5.0.07.0240.
Any suggestion would be appreciated.
Hello
You should download the 64-bit version. vpnclient-winx64-MSI-5.0.07.0240-K9-Beta.exe is the version you tried to install the 32-bit version
Thank you
John
-
GRE tunnels will not come on VPN IPsec/GRE
Hi all
We have 400 + remote sites that connect to our central location (and a backup site) using Cisco routers with vpn IPSec/GRE tunnels. We use a basic model for the creation of tunnels, so there is very little chance of a bad configuration on each router. Remote sites use Cisco 831 s, central sites use Cisco 2821 s. There is a site where the tunnels WILL refuse just to come.
Routers are able to ping their public IP addresses, so it is not a routing problem, but gre endpoints cannot ping. There is no NATing involved, two routers directly accessing the Internet. The assorded display orders seem to indicate that the SAs are properly built, but newspapers, it seems that last part just don't is finished, and the GRE tunnels come not only upward.
The attached log file, it seems that both its IPSEC & ISAKMP are created @ 00:25:14, then QM_PHASE2 end @ 00:25:15.
00:25:15: ISAKMP: (0:10:HW:2): node error 1891573546 FALSE reason for deletion "(wait) QM.
00:25:15: ISAKMP: (0:10:HW:2): entrance, node 1891573546 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
00:25:15: ISAKMP: (0:10:HW:2): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
00:25:15: ISAKMP (0:268435467): received 208.XX packet. Dport 500 sport Global 500 (I) QM_IDLE yy.11
00:25:15: IPSEC (key_engine): had an event of the queue with 1 kei messages
00:25:15: IPSEC (key_engine_enable_outbound): rec would prevent ISAKMP
00:25:15: IPSEC (key_engine_enable_outbound): select SA with spinnaker 1572231461/50
00:25:15: ISAKMP: (0:11:HW:2): error in node-1931380074 FALSE reason for deletion "(wait) QM.
00:25:15: ISAKMP: (0:11:HW:2): entrance, node-1931380074 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
00:25:15: ISAKMP: (0:11:HW:2): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
00:25:15: IPSEC (key_engine): had an event of the queue with 1 kei messages
00:25:15: IPSEC (key_engine_enable_outbound): rec would prevent ISAKMP
00:25:15: IPSEC (key_engine_enable_outbound): select SA with spinnaker 310818168/50I don't have the remote router log file, and is very long, so I joined her. Before that I captured the log file, I enabled debugging ipsec & isakmp and immediately authorized the SAs.
Assorted useful details and matching orders of show results:
Cisco IOS Software, C831 (C831-K9O3SY6-M), Version 12.4 (25), RELEASE SOFTWARE (fc1)
There are 2 connections of IPSEC/GRE tunnel:
Tunnel101: KC (208.YY. ZZ.11) - remote control (74.WW. XX.35)
Tunnel201: Dallas (208.XX. YY.11) - remote control (74.WW. XX.35)Site-382-831 #sho ip int br
Interface IP-Address OK? Method State Protocol
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset upward, upward
FastEthernet3 unassigned YES unset upward, upward
FastEthernet4 unassigned YES unset upward, upward
Ethernet0 10.3.82.10 YES NVRAM up up
Ethernet1 74.WW. XX.35 YES NVRAM up up
Ethernet2 172.16.1.10 YES NVRAM up up
Tunnel101 1.3.82.46 YES NVRAM up toward the bottom<>
Tunnel201 1.3.82.62 YES NVRAM up toward the bottom<==== ="">====>
NVI0 unassigned don't unset upward upwardsSite-382-831 #.
Site-382-831 #sho run int tunnel101
Building configuration...Current configuration: 277 bytes
!
interface Tunnel101
Description % connected to the 2nd KC BGP 2821 - PRI - B
IP 1.3.82.46 255.255.255.252
IP mtu 1500
IP virtual-reassembly
IP tcp adjust-mss 1360
KeepAlive 3 3
source of tunnel Ethernet1
destination of the 208.YY tunnel. ZZ.11
endSite-382-831 #.
Site-382-831 #show isakmp crypto his
status of DST CBC State conn-id slot
208.XX. YY.11 74.WW. XX.35 QM_IDLE ASSETS 0 11
208.YY. ZZ.11 74.WW. XX.35 QM_IDLE 10 0 ACTIVE
Site-382-831 #.Site-382-831 #.
Site-382-831 #show detail of the crypto isakmp
Code: C - IKE configuration mode, D - Dead Peer Detection
NAT-traversal - KeepAlive, N - K
X - IKE extended authentication
PSK - GIPR pre-shared key - RSA signature
renc - RSA encryptionC - id Local Remote I have VRF status BA hash Auth DH lifetime limit.
11 74.WW. XX.35 208.XX. YY.11 ACTIVE 3des sha psk 1 23:56:09
Connection-id: motor-id = 11:2 (hardware)
74.WW 10. XX.35 208.YY. ZZ.11 ACTIVE 3des sha psk 1 23:56:09
Connection-id: motor-id = 10:2 (hardware)
Site-382-831 #.Site-382-831 #.
Site-382-831 #show crypto ipsec hisInterface: Ethernet1
Tag crypto map: IPVPN_MAP, local addr 74.WW. XX.35protégé of the vrf: (none)
ident (addr, mask, prot, port) local: (74.WW. XX.35/255.255.255.255/47/0)
Remote ident (addr, mask, prot, port): (208.YY. ZZ.11/255.255.255.255/47/0)
current_peer 208.YY. ZZ.11 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: 2333, #pkts encrypt: 2333, #pkts digest: 2333
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
#send 21, #recv errors 0local crypto endpt. : 74.WW. XX.35, remote Start crypto. : 208.YY. ZZ.11
Path mtu 1500, mtu 1500 ip, ip mtu IDB Ethernet1
current outbound SPI: 0x45047D1D (1157922077)SAS of the esp on arrival:
SPI: 0x15B97AEA (364477162)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: C83X_MBRD:4, crypto card: IPVPN_MAP
calendar of his: service life remaining (k/s) key: (4486831/1056)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0x45047D1D (1157922077)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: C83X_MBRD:3, crypto card: IPVPN_MAP
calendar of his: service life remaining (k/s) key: (4486744/1056)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
protégé of the vrf: (none)
ident (addr, mask, prot, port) local: (74.WW. XX.35/255.255.255.255/47/0)
Remote ident (addr, mask, prot, port): (208.XX. YY.11/255.255.255.255/47/0)
current_peer 208.XX. YY.11 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: 2333, #pkts encrypt: 2333, #pkts digest: 2333
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
#send 21, #recv errors 0local crypto endpt. : 74.WW. XX.35, remote Start crypto. : 208.XX. YY.11
Path mtu 1500, mtu 1500 ip, ip mtu IDB Ethernet1
current outbound SPI: 0xE82A86BC (3895101116)SAS of the esp on arrival:
SPI: 0x539697CA (1402378186)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2008, flow_id: C83X_MBRD:8, crypto card: IPVPN_MAP
calendar of his: service life remaining (k/s) key: (4432595/1039)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0xE82A86BC (3895101116)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2001, flow_id: C83X_MBRD:1, crypto card: IPVPN_MAP
calendar of his: service life remaining (k/s) key: (4432508/1039)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
Site-382-831 #.Site-382-831 #.
Site-382-831 #show crypto ipsec his | Pkts Inc. | life
#pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
calendar of his: service life remaining (k/s) key: (4486831/862)
calendar of his: service life remaining (k/s) key: (4486738/862)
#pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
calendar of his: service life remaining (k/s) key: (4432595/846)
calendar of his: service life remaining (k/s) key: (4432501/846)
Site-382-831 #.Site-382-831 #.
Site-382-831 #show crypto isakmp policyWorld IKE policy
Priority protection Suite 10
encryption algorithm: three key triple a
hash algorithm: Secure Hash Standard
authentication method: pre-shared Key
Diffie-Hellman group: #1 (768 bits)
lifetime: 86400 seconds, no volume limit
Default protection suite
encryption algorithm: - Data Encryption STANDARD (56-bit keys).
hash algorithm: Secure Hash Standard
authentication method: Rivest-Shamir-Adleman Signature
Diffie-Hellman group: #1 (768 bits)
lifetime: 86400 seconds, no volume limit
Site-382-831 #.Site-382-831 #show crypto card
"IPVPN_MAP" 101-isakmp ipsec crypto map
Description: at the 2nd KC BGP 2821 - PRI - B
Peer = 208.YY. ZZ.11
Extend the PRI - B IP access list
access list PRI - B allowed will host 74.WW. XX.35 the host 208.YY. ZZ.11
Current counterpart: 208.YY. ZZ.11
Life safety association: 4608000 Kbytes / 3600 seconds
PFS (Y/N): N
Transform sets = {}
IPVPN,
}"IPVPN_MAP" 201-isakmp ipsec crypto map
Description: 2nd Dallas BGP 2821 - s-B
Peer = 208.XX. YY.11
Expand the list of IP SEC-B access
s - B allowed will host 74.WW access list. XX.35 the host 208.XX. YY.11
Current counterpart: 208.XX. YY.11
Life safety association: 4608000 Kbytes / 3600 seconds
PFS (Y/N): N
Transform sets = {}
IPVPN,
}
Interfaces using crypto card IPVPN_MAP:
Ethernet1
Site-382-831 #.Tunnel between KC & the remote site configuration is:
Distance c831 - KC
crypto ISAKMP policy 10
BA 3des
preshared authentication
!
PRI-B-382 address 208.YY isakmp encryption key. ZZ.11
!
Crypto ipsec transform-set esp-3des esp-sha-hmac IPVPN
transport mode
!
IPVPN_MAP 101 ipsec-isakmp crypto map
Description of 2nd KC BGP 2821 - PRI - B
set of peer 208.YY. ZZ.11
game of transformation-IPVPN
match address PRI - B
!
interface Tunnel101
Description % connected to the 2nd KC BGP 2821 - PRI - B
IP 1.3.82.46 255.255.255.252
IP mtu 1500
KeepAlive 3 3
IP virtual-reassembly
IP tcp adjust-mss 1360
source of tunnel Ethernet1
destination of the 208.YY tunnel. ZZ.11
!
interface Ethernet0
private network Description
IP 10.3.82.10 255.255.255.0
IP mtu 1500
no downtime
!
interface Ethernet1
IP 74.WW. XX.35 255.255.255.248
IP mtu 1500
automatic duplex
IP virtual-reassembly
card crypto IPVPN_MAP
no downtime
!
PRI - B extended IP access list
allow accord 74.WW the host. XX.35 the host 208.YY. ZZ.11
!KC-2821 *.
PRI-B-382 address 74.WW isakmp encryption key. XX.35
!
PRI-B-382 extended IP access list
allow accord 208.YY the host. ZZ.11 the host 74.WW. XX.35
!
IPVPN_MAP 382 ipsec-isakmp crypto map
Description % connected to the 2nd KC BGP 2821
set of peer 74.WW. XX.35
game of transformation-IPVPN
match address PRI-B-382
!
interface Tunnel382
Description %.
IP 1.3.82.45 255.255.255.252
KeepAlive 3 3
IP virtual-reassembly
IP tcp adjust-mss 1360
IP 1400 MTU
delay of 40000
tunnel of 208.YY origin. ZZ.11
destination of the 74.WW tunnel. XX.35
!
endAny help would be much appreciated!
Mark
Hello
logs on Site-382-831, only see the crypt but none decrypts, could you check a corresponding entry on the peer and see if has any questions send return traffic?
Site-382-831 #show crypto ipsec his | Pkts Inc. | life
#pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
calendar of his: service life remaining (k/s) key: (4486831/862)
calendar of his: service life remaining (k/s) key: (4486738/862)
#pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
calendar of his: service life remaining (k/s) key: (4432595/846)
calendar of his: service life remaining (k/s) key: (4432501/846)
Site-382-831 #.Kind regards
Averroès.
Maybe you are looking for
-
DV6 7070ex: dv6 7070ex size Max SSD
I want to install samsung 850 EVO 500 GB in my hp dv6 7070ex will it work? because I sow in the manual below which is supported 160GB! http://h10032.www1.HP.com/CTG/manual/c03582006.PDF
-
Convert a name cluster Labview Teststand container name
Hi all I realized that day that there is no way to convert a Labview cluster in a container of Teststand and vice versa. So I'm currently work on a cluster/container recursive parser that would be rebuild the structure of mirroring in variant/Propert
-
Photo printing without borders on an Officejet 7612, since a Win 8.1 desktop
Just bought a new 7612 Officejet, was wanting to a printer with the ability to scan and print 11 x 17, which is what attracted me to this (as well as how much the prices sank on the printers large format in recent years). This printer replaces an Of
-
I found a variety of positions that describe how to disable the "connect automatically" option for a specific network you connected to in the past (via 'manage wireless networks), for example: http://answers.Microsoft.com/en-us/Windows/Forum/Windows_
-
How to launch AutoCAD Mechanical 2007 as a non-administrator user
We have installed a stand-alone copy of AutoCAD Mechanical 2007 on a PC running Windows 7 Pro 64-bit operating system. No, we can only launch the AutoCAD software as an administrator. Can someone tell me how we can launch the AutoCAD program as a pro