VPN issues with XP machine

Similar Questions

• Peripheral USB take two tests at work and does not start with Time Machine drive connected

  I have a 2015 mid Macbook Pro 15 "work (so I can't afford to take this service for a period of days). My specs are:

  

  I am running the latest version of El Capitan, 10.11.4.

  My problem is that USB devices - such as Logitech USB headsets, USB sticks, external hard drives, etc. - always and I always say, require two plugins to be detected by the system. It doesn't work the first time. I always have to connect once, remove it and plug it in again.

  In addition, if I try to boot the system with my Time Machine/external USB HD drive, it won't start at all. Only if I reboot without all the devices connected it boot successfully.

  My questions are: is it a software or a hardware problem? And someone saw this before? I think it's a hardware problem, although the last notes of patch involve the last update of OS may have addressed a similar issue with audio devices. (This would affect my Logitech USB headset no doubt, but it did not help). If it is a hardware problem that requires a fix of the motherboard, I can't do it, since the new it's a working machine that I can't part with for a long period of time, unless SHE is willing to trade me a machine on-site. It does not affect other most operation every day except that I need to plug devices twice, all the time.

  Thank you, everyone.

  Try this-

  How to reset the NVRAM on your Mac - Apple Support

  Reset the management system (SCM) controller on your Mac - Apple Support

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• vCenter 5.1 having issues with snapshot size alerts

  Hello world
  I have a problem regarding the sending of alerts by e-mail when vm snapshot size exceeds a certain size. (in fact, any size with problems)

  She doesn't send traps, ignoring what I did come in like it size and spamming my Inbox.

  Go to alerts vcenter - new alarm - monitor: VMS - monitor specific conditions or State...

  Trigger: Condition: above

  Size of Snapshot in VM (GB): WARNING: level 1

  Snapshot in VM (GB) size: alert level: 2

  Send email to: myself

  When I click on ok. I have tons of emails from vcenter which all my virtual machines exceeded the size limit of 1 GB instant! (but he doesn't based on storage views)

  Then I put the level to 10 GB makes no sense. It keeps me spamming all my virtual machines with snapshot size exceeded.

  This setting worked well with vcenter 5.0 because I upgraded to vcenter 5.1, this problem appeared. Note that I have 2 vcenters, two of them having the same problem.

  Please see the attached photos.

  VCenter version: 5.1 build: 880146 running on windows server.

  Would you kindly try to put the same trap and let me know if this is a bug or not?

  Thank you all happy new year

  It is a known issue with vCenter Server 5.1 (VM Snapshot size (GB) alarm incorrectly triggers on VMS with no snapshots (2037464)), which - according to http://www.vmware.com/support/vsphere5/doc/vsphere-vcenter-server-510b-release-notes.html - does not seem to have been resolved with the last 5. 1 b version.

  André

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN

• My Clickfree automatic backup drive has stopped working, with my iMac, what is the best replacement to use with Time machine

  My Clickfree automatic backup drive I had for many years stopped working with my iMac, what is the best replacement to use with Time Machine.

  I can't even reformat the drive to try to start over, then think its time I invested in a high today but don't know where start looking so any advise would be a great help.

  Thank you guys

  A lot of users on these forums recommend OWC (www.macsales.com) Mercury Elite Pro series JEP due to their durability, affordability and quality of construction. I have about 6 of them connected to my iMac and have never had a speaker to fail. When a hard drive fails, substitute is a 5-minute process to re - use the box. To help you get started, you can find the line to: https://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  You can find them in various ways and with a variety of configurations of connection so you can find the one that best fits your needs.

  Good luck!

• My emails are saved when I do a back up with time machine

  Mac Pro book. Will be backed up my emails when I make a back up with time machine. ?

  Yes. Note that attachments only will be saved if they download

• iPod Touch 5 Gen - iOS 9.3.1 lightning connector issues - with accessories

  Has anyone seen a problem using iOS 9.3.1 on an iPod Touch 5th generation with lightning connector devices?  Specifically, I use the iPod in a cradle of scanner which connects via the connector of the lightning, until iOS 9.3.1 the cradle was visible to the application, but once it has been updated the scanner loses communication to the iOS device and application.  IPod charge and connect to iTunes, no problem, but refuses to see the cradle, I have another iPod on an older version of iOS, which connects to the cradle even without problem.

  To try to find, I've updated the iOS to 9.3.2 beta fault from the site of the developer, this problem has now fixed the issue with the cradle.  I can't that assume Apple broke the connection in iOS 9.3.1?

  Sometimes an iOS update breaks compatibility with accessories. Since then, he has worked with next beta which seems to be the cause.

  All yo can do is to continue using the beta until the version is rejected in the pubis.

  Have reported the problem to Apple to ensure that the beta version is not yet revised to cause the same problem?

  https://www.Apple.com/feedback/iPodTouch.html

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• E-mail restoration with time machine

  Goodday!

  I have a problem with the email backups in Time Machine. Maybe someone can help me?

  Using iMac 21.5 OS X El Capitan 10.11.3.

  For more than a year I do (automatic) backups with Time Machine on an external drive. Works perfectly, the time that I needed.

  I now wanted to look for an older email. Open the Machine from the time to Mail in my Inbox, but all the backups that I can scroll to have an empty Inbox...!

  Only the last screen shows my present e-mails in the Inbox, but all other screens even since the last backup, see the empty Inbox.

  Read on the internet that more people suffer from the same problem.

  Someone has any idea how to solve this problem?

  Thank you!

  Eric

  All mailboxes are empty in the snapshots, or just this one?

• I can't get my new WD external hard drive to work with Time Machine.

  My Seagate 1 TB external hard drive, connected to my Airport Extreme, use the USB port, was completed (it stores up to 3 1 iMac and MBP), so I bought a Western Digital 2 TB hard drive to replace it. I formatted correctly, connected to my MBP, then connected to the Airport Extreme. When I opened the time Machine, it didn't appear. By selecting "Set up the new TimeCapsule" open Airport utility. By clicking on the router button gave me change. By clicking on the "Record" button showed my new hard drive. The "setup" button is grayed out, unless I unchecked and double-checked all of the options. He warned me that I would be offline for a while, but it did nothing; My wife MBP and MBP my son not a never lose their connection to the internet, and I lose mine, either.

  My Mac guy, who never met a problem he couldn't fix it, is puzzled. So I am. We tried all the usual ideas, restart my MBP, restart the Airport Extreme, reformat the external hard drive, with different numbers of partitions (and Yes, I chose the GUID), but we can not simply Time Machine to connect with the hard drive. It is a Western Digital My Passport Ultra. This external hard drive is not compatible with Time Machine?

  What version is your AE? Backup is supported only on the sector of Tower model.

  You are self feeding Ultra Passport? It really must be external powered... or plugged into a powered hub.

  My passport readers have been consistent in the past... but sometimes strange things... That is, they can change the USB chip without warning, resulting in questions. The USB hub can help.

  There is also something... Plug the USB key into one of your computers and start backup TM on this... proceed very long... but we need to start... Cancel backup... and then plug it into AE and see what happens.

• Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.

  2. they will not be usable until the restoration.

  (140480)

• I used my new 4 to Seagate Backup Plus on my laptop. He said he had to erase files to make it compatible with Time Machine. Now to 4 is full and cannot be recognized. What should I do?

  I'm on OSX El Capitan 10.11.3 and I've never used before to Seagate Backup Plus 4. I wasn't able to put the files using the Macbook Pro. It was purchased only a few hours ago.

  After plugging in, he asked if I would use it for Time Machine, and it should be deleted so that it is compatible with Time Machine. This is my first time to use an external hard drive on my laptop, and it is also my first attempt to use Time Machine.

  My external hard drive appears only on the disk utility now. Help, please.

  

  In the above image, you click the physical drive. It does not show the available space. You will need to click on the item "Untitled" below to see the space actually available. "Untitled" is the real partition on the disk.

  You can find information on the following link useful-> http://www.macworld.com/article/2990837/storage/how-to-format-a-startup-drive-in - el - capitan.html

• A few days, I bought a mac mini which I transferred the data and programs with time machine: programs have been updated except for iMovie, and now it seems that I have to pay for the update: possible? What I am doing wrong?

  A few days ago, I bought a mac mini and I transferred all my data and programs with time machine: all programs have been updated but iMovie (7.1.4)... However, it seems that, to update to the latest version, I have to pay to download on Appstore: is it possible? what I am doing wrong?

  If it were a new mac mini, you need already installed 10.1 iMovie.  Otherwise, but you already have iMovie 9 registered version to your Apple ID, you can upgrade to version 10 for free, but if (as it appears) is an earlier version then you have to buy version 10.

  Geoff.

• Pavilion g6: Atheros connection issues with Arris Modem

  Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

  @s_z,

  Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

  Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

  Please let me know how things are going.  Thanks again for posting and have a great day.