VPN network for different countries
Hello everyone,
I would like to ask you about the Cenario below,
A company has the same Structure in different countries.
in a country, there are some offices, about 30-40 and a data center.
I thought to connect the offices with the domain controller in a country was to implement VPN Flex.
How would be possible to interconnect all countries?
I found a few Graphis on a hierarchical network which is more or less on a connection between hubs and using the nodal point.
Can someone give me more details about a recommendation? Perhaps a guide?
is it possible to use a VPN FLEX with Central HUB and connect all offices together for all offices for a company?
Thank you very much
Thomas
Hi Thomas,
Normally, he would address the two tunnels:
Hub to hub and talking to talk.
In normal operation, rays have relationships with the two hubs. After a failure, the routing protocol passes one hub to another.
If we talked establishes one connection with the other speaks, a tunnel a spoke-to-spoke dynamic is created with the configuration of switching shortcut.
Hope it meets your request.
Kind regards
Aditya
Please evaluate the useful messages.
Tags: Cisco Security
Similar Questions
-
How can I order a calendar with information for different countries
In the past, I was able to create a calendar and then order different versions of information for different countries. I can't find this option now. It has been deleted? If this is not the case, how can I do?
Hey oldcelt,.
I understand that you want to add information to another country. Let's see what options are available for your calendar.
You can view the holidays from a specific country. To do this, open the calendar in the calendar settings button settings button of the toolbar and you will see a section for "national holidays of the show. Make your selection and you will be ready to go. For more details, take a look at the information below.
Change the date of a calendar information
http://help.Apple.com/photos/Mac/1.1/#/phtb94d9019Change the date of a calendar information
You can easily change the settings of date and your calendar at any time. You can also have your calendar displays events in your calendar application, the national holidays of many countries and anniversaries that you saved in Contacts.
Click project on the toolbar, and then double-click the calendar.
Do one of the following:
Choose a fresh start, month, or year: Use the pop-up menus at the top of the settings pane.
Change the number of months in the calendar: Pick a number on the shortcut menu.
Display the national holidays of the country: Click the menu drop-down "show national holidays ' and choose the desired country. To stop the display of national holidays, choose None.
Display the calendar events: Check the box next to each calendar that you want to display.
Note: The calendars that you see listed here are the ones you have set up in the calendar application on your Mac.
Show the birthdays you have saved in contacts: Select "show Contacts birthdays."
Take it easy
-
Duration of different valuation of the song on iTunes for different countries/regions
I'm an artist and I used TuneCore to distribute my music. There is a link to iTunes for my way, but it is not available in the iTunes store of Turkey? The assessment process takes different times in different countries?
GMS,
Yes, it may take different time in different country iTunes Store.
If it seems that there is an unreasonable time for the Turkey store, please contact TuneCore and ask them to look into the issue.
-
Pricing balanced for different countries
I wanted to see how the price of the Suite CC compared here in Mexico than the United States. Mexican pesos was not an option, but I was very interested to see that the Guatemala is priced in U.S. dollars. It is common knowledge that the economies of the countries vary with respect to compensation and the indicator GDP - one just about the expense of life. After some calculations of numbers, actually someone in the Guatemala should pay about 9 to 10 times the price of a person or a company in the United States.
Use the dollar as a base line and doing the conversion right really changes the way forward for a product that does not exist on the technical plan and you actually never own just rent?
There is a thread on this - 26 000 views
-
change in the apple store for different countries
Hello
I use a paid Indians account from now on. but when I changed the land of the apple store in Australia, he asks a credit card. so, how can I create a free who represent the same apple ID
When you change the region Apple ID, you must update your billing with valid billing information information for example credit cards in the country that you change the region.
Change your iTunes Store country or region - Apple Support
Here's how you can create an Apple ID without credit card. You cannot create new Apple ID with the e-mail address that is already used in another account.
-
BlackBerry App My App does not appear in different countries
Hello
I wonder, why is my application does not appear in the world of the app for different countries? I'm at the Canada and I can see my app in top 3 but my cousin's in India and he can't see my app in App World.I made my application available for all carriers and all countries, why is it still not appear? It's frustrating to know that half the people aren't able to make use of my application.
Can someone please check?
The application name is "StockDaddy".
http://appworld.BlackBerry.com/WebStore/content/31351930/?CountryCode=CA
Thank you!
Please ignore, my brother had no OS yet installed 10.1 on his phone! Sorry for the red flag.
BTW, please see my application, "StockDaddy", which allows you to easily keep track of your inventory investment.
PS, it is certainly worth checking out!
-
A point of access for different networks
Hi all
I need to use an access point in several places: my house, my gf, my office. I intend to use the same device for all 3 places.
My problem is: 3 local networks have different configurations (192.168.1.x for two, 192.168.0.x for another and the doors have different addresses).
If the access point could get its network with DHCP setting, this'll be fun. I looked inside the different pdf manuals, and the Linksys access points seem to not be designed to be a DHCP client. Maybe I'm wrong? Or maybe someone has another idea?
You can configure WAP54G DHCP client mode. There are two available options.
-
How to set up the Office remotely between two pc in different countries
Hi, I just want to know how to use Remote Desktop between PC Windows 7 in different countries...
I just tried Windows remote assistance but it take too long to set up first help me post the invitation file and the key to past and then I download the file and open it with Windows Remote Assistance and then copy the access code and enter it in the text box vacuum... and blablablabla
I have seen a lot of video on how to set up remote desktop for always as when I want to use remote desktop, just ask the user on the other computer and connect it
How can I do
Thank you* and what is Remote Desktop connection software in windows 7? (next to the Windows Remote Assistance)
looking for helpFirst of all know what version of Windows 7 is running on the computer you want to access remote/control. Go to the Start button and type winver in the search window. Windows will report to the version in a pop-up window on your desktop.
***********************************
Assuming that the computer is running Windows 7 Ultimate or Pro...
The main steps are...
- Activate [DRC] Remote Desktop on Windows 7 Ultimate DRC PC host.
- If the login ID DRC on the Windows 7 Ultimate DRC host PC is not an administrator, and then add the user to the remote desktop users group. Don't forget the DRC connection user ID are local on the host Windows 7 Ultimate DRC PC not the DRC PC client.
- Make sure that there is an exception in the Windows Firewall, or any third-party firewall on the Windows 7 Ultimate DRC host PC.
- If the host Windows 7 Ultimate DRC PC is behind a router make sure that TCP Port 3389 is transferred to the LAN IP (static is preferable) of Windows 7 Ultimate DRC host PC.
You can test TCP Port 3389 port through your router forwarding by going to the http://www.canyouseeme.org test site. For help setting up through any router port forwarding, go to the PortForward.com site for help. Ignore references to UDP Port 3389.
http://PortForward.com/English/applications/port_forwarding/Remote_Desktop/Remote_Desktopindex.htm
Test call Windows 7 Ultimate DRC host PC from another PC or laptop computer on your local network using its LAN IP address (static is preferable).
http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html
To call from a remote location using the public IP address of the router to the PC host of Windows 7 Ultimate DRC is behind or a full domain name [FQDN] of DynDNS (which I assume that you have already configured).
Its highly recommended that you use Network Level Authentication [KLA] If you connect remotely from a Windows 7, Vista or XP SP3/SP2 client.
http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow
http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html#SP3
http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/host-UseNLA.jpg
Make sure that you use the latest version of the client if your connection from a client computer to Vista or XP SP3/SP2. Windows 7 includes the new RDC client software.
http://support.Microsoft.com/kb/969084
General help written for Vista, but close enough to Win 7...
http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html
MSFT Win 7 DRC help pages...
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection
http://Windows.Microsoft.com/en-us/Windows7/search?q=remote+desktop&PRD=Windows7
***************************************
If the remote computer runs Windows 7 Home Premium...
Windows Live Mesh 2011 remote connections works well for the access/remote control of a computer Windows 7 Home Premium. It gives you a nice Remote Desktop display type of the Office from remote computers.
http://explore.live.com/Windows-Live-2011-system-requirements
You can use a web browser to access without installing any software, other than an ActiveX control, on the remote client or install Live Mesh on the client. Your choice.
http://explore.live.com/Windows-Live-Mesh-Remote-Desktop-using?OS=Mac
http://explore.live.com/Windows-Live-mesh-devices-remote-connections-what-UI
If you use Live Mesh Remote Connections I suggest to create a Live ID limited account type that does not include an e-mail account. I have install a limited Live ID I use only to connect to some Live Mesh remote connections to computers I want / access control.
https://accountservices.passport.NET/ppnetworkhome.SRF?VV=1200&mkt=en-us&LC=1033
You can, if you wish, also use an existing Live ID or create a new, but this is your choice.
I installed Live Mesh 2011 on desktop Win 7 Home Premium to my wife and in distance/access control can it go literally anywhere. Sometimes I use the web based (IE. Method ActiveX) from my laptop on the desk.
Here is an example of a session Windows Live Mesh 2011 remote connections on my laptop computer for access to the / remote control of desktop Win 7 Home Premium to my wife.
Otherwise if you want to remotely control a computer looking Windows Home Edition to TeamViewer (free for personal use) or VNC (my favorite is UltraVNC with its encryption plugin) as the other two alternatives.
-
Members of the family in different countries.
All of my family members are in different countries, my account is in the US store, my wife uses China, my sister's account UK and my parents are from Taiwan. I was an installation plan of a family sharing for my family through my credit as a gift for them.
However, after sending the invitation family hand to them, they said that forcing system to change their country apple ID, which will be the effect on their container and apps.
My parents don't know even how to change country. Why a family shares could have an impact on their previous applications and also to climate forcing of store countries?
I just want to buy apps and music apple for them through my APPLE ID, why things could become so difficult?
Apple cannot and should not forcing Member of my family to use the same account of country.
It is family sharing, so no sharing society or school sharing. Members of the family of blood relations are not relations of countries or relationships of the location.
Please tell me how to use my credits and APPLE CORRECT installation ID family shares without changing APPLE ID countries worldwide.
Thank you.
While I can't find anything that says explicitly as much, I think that Yes, all members of the 'family' should indeed be in the same country and using the same iTunes country and stores the App. However, you should contact support for more information: https://getsupport.apple.com/
-
I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and communication with our teachers.plz it back... .hope you will do
Nothing has been deleted. Perhaps if you explain better what it is you are looking for, a person might be able to help. You mean maybe predictive text? All these settings are in settings > general > keyboard.
-
unused monthly subscription and transfer to different countries
Hello world
In fact I recently purchased a monthly subscription to a particular country, but had to cancel with a rare use, as it is necessary to use the same service to another country B.
You know is it possible to move the remains minutes (almost unused) (credits) to any other monthly subscription for the different countries?
I feel really empty as I know Skype has said, we can use leftover minutes until the days expires, but there is no point that people need to use the same monthly subscription just because they go back to the other end of the country.
If we are not able to transfer the remaining subscription right, Skype should have function to modify reftover to some credit points credits, to allow to reuse the same schema at least.
What do you think? Y at - it suggestions for this?
Thank you
Hello and welcome to the Skype community.
Unfortunately, once used a subscription can not be refunded. Unused minutes are "lost" at the end of each monthly billing period and will not be postponed.
TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest version of Skype: Windows & Mac
If my advice helped to solve your problem, please mark it as a solution to help others.
Please note that I usually do not respond to unsolicited private Messages. Thank you. -
readers of connection but the VPN network not showing
I have a couple of Windows machines that work very well, so I certainly have the correct information for VPN.
When I hit 'Connect', it does not seem to connect to the VPN with success and I can see the data traffic in both directions.
After that, I tried "Go to server" and if I navigate or enter the details of the server manually, it will not connect to network server actions.
I think I have the completely straight oblique lines around and I tried to add the username at the end of the address of the server, which is an SME.
I put as follows
SMB://server/folder/
I also tried smb://server/folder/username
No joy. Can anyone help please?
Thank you
Navigation uses Hello and Hello does not normally work through non-local connections, so it will not work on a VPN connection. It should be possible to connect through a VPN by using one of the following URL format in "connect to Server".
AFP://192.168.1.10
or
AFP://fileserver.domain.com
AFP://fileserver.local will not work since it is reserved for the Hello that as I mentioned does not work over remote links.
Note: Not everyone gets their properly configured VPN system for searching DNS is possible that afp://fileserver.domain.com may also fail but the numeric address should work.
Note: Again according to the VPN configuration, they may need to define a static route and have failed to do so, it would break digital even answer, however if numeric address works for Windows, they must work for Macs.
It is always interesting to try to PING tests.
-
Original title: help
It's my first Siu of this system, so I want to make some friends from different countries, how do?
Hi hangfenge,
The purpose of these forums to answer is to help people having problems with their computers and the various products we cover here - it is not a place for personal conversations in order to make friends.
To do this, I would say something like Facebook: http://www.facebook.com/ or among the multitude of alll chat rooms available on the web. Here's a search that can help you find a: http://www.bing.com/search?q=chat%20rooms%20online&PQ=chat%20rooms&SP=2&QS=AS&SK=AS1&sc=8-10&form=BB07SS&pc=BB07.
If you have problems with your computer or software, can find here appropriate forum and ask your question and someone will be happy to help you.
I hope this helps.
Good luck!
-
I've recently deployed a SonicWALL NSA2600 and have implemented a VPN site-to site both group WAN VPN that work properly. I distributed global vpn client for users who need access to network resources. However, a user uses exclusively based Apple operating systems. Y at - it a customer vpn global for Apple, or is the app of choice? If there is no other choice, this mobile app will work for a desktop Apple computer?
Thank you
Jason
This link is more accurate for MacOS.
Installation and use NetExtender on MacOS:
-
ASA 5505 9.1 Unable to ping inside the IPSec VPN network
To give some background that the asa has been reloaded and upgranded from 8.2 to 9.1. I am able to connect to vpn, but unable to reach anything inside, including of the asa. I didn't unfortunately not much experience with 8.3 +, but I thought that I had nat made appropriately. Nothing else is currently configured for the asa, as it's just an asa test currently, so I could of just missed something odvious.
ASA Version 9.1 (3)
!
hostname testasa
activate the encrypted password of Ry5/Pmodu2QL1Xe3
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
names of
mask 192.168.3.1 - 192.168.3.200 255.255.255.0 IP local pool VPNPool
!
interface Ethernet0/0
!
interface Ethernet0/1
switchport access vlan 2
!
interface Ethernet0/2
switchport access vlan 2
!
interface Ethernet0/3
switchport access vlan 2
!
interface Ethernet0/4
switchport access vlan 2
!
interface Ethernet0/5
switchport access vlan 2
!
interface Ethernet0/6
switchport access vlan 2
!
interface Ethernet0/7
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.2.252 255.255.255.0
!
passive FTP mode
network of the NETWORK_OBJ_192.168.2.0_24 object
Subnet 192.168.2.0 255.255.255.0
network of the NETWORK_OBJ_192.168.3.0_24 object
subnet 192.168.3.0 255.255.255.0
network of object obj-Interior
Subnet 192.168.2.0 255.255.255.0
object obj - vpn network
subnet 192.168.3.0 255.255.255.0
VPNGroup_splitTunnelAcl list standard access allowed 192.168.2.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source inside obj obj-indoor destination static obj - vpn obj - vpn
!
NAT source auto after (indoor, outdoor) dynamic one interface
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.2.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec pmtu aging infinite - the security association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd address 192.168.2.50 - 192.168.2.100 inside
dhcpd dns 208.67.222.222 198.153.192.40 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal VPNGroup group strategy
Group Policy attributes VPNGroup
value of server DNS 208.67.222.222 198.153.192.40
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPNGroup_splitTunnelAcl
disable the split-tunnel-all dns
no method of MSIE-proxy-proxy
VLAN no
NAC settings no
test I9znLlryc6yq.BN4 encrypted privilege 15 password username
tunnel-group VPNGroup type remote access
attributes global-tunnel-group VPNGroup
address pool VPNPool
Group Policy - by default-VPNGroup
IPSec-attributes tunnel-group VPNGroup
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
inspect the icmp error
!
global service-policy global_policy
context of prompt hostname
Hello
To be honest, I can't see anything in the configuration that should be a problem.
Your NAT settings seem to be correct.
You have the global setting of "sysopt connection permit - vpn" who does not appear in this form in the CLI configuration. This configuration means essentially that the SAA would allow traffic from a VPN connection to work around interface ACL of the interface when the VPN connection is completed (outside)
Your ACL Split Tunnel is also correct.
You might connect with VPN Client and run a continuous ICMP to a host of LAN and provide an output of the following command after a the ICMP has run a few seconds
Crypto ipsec to show his
Should see the counters of VPN.
You can also try adding
management-access inside
This should allowed you to the 'internal' to the ASA IP ICMP and also manage ASA through the VPN connection by using the 'internal' the IP address provided you have enabled it. But for this you need to change the configuration of "nat" in this
NAT (inside, outside) static source inside obj obj-indoor destination static obj - vpn vpn-obj-research route
Hope this helps
-Jouni
Maybe you are looking for
-
The magic mouse disconnects all working
Everything working on my Macbook Pro connection bluetooth magic mouse stops every now and then on his own. I have to wait a few seconds before clicking on, reconnect the mouse. It looks like a period of connection, but I can't find an entry in the sy
-
computer does not start after installing video card
I, m new here so please bear with me. I have a PC HP Pavilion Media Center TV (m7434n) I'm trying to replace the video card (Nvidia GeForce 6200SE with Turbo Cache) in. I am trying to replace it with a Nvidia EVGA 8400GS. I delete all the nvidia dri
-
Why is it called 'Blue Screen of Death?'
Why is the Windows crash screen called the 'Blue Screen of Death"when some people who don't know much about computers think that a BSoD means a blue screen that kills you when it's really just an error message?
-
KB977206: this update is not applicable to your computer.
I tried to install Windows xp mode in my windows 7 PC. I installed Windows xp and virtual PC, and then kb977206 to installation mode on the pc without hardware virtualization. But it throws the error message indicating that my computer is not applica
-
How do you define a printer wireless on an iPad?