A point of access for different networks

Similar Questions

• Clientless VPN SSL - based credentials for different networks?

  Hi guys,.

  I want to be able to display different cifs: / / and unc paths based on the user who connects to the portal of the SSL.

  Could someone help me on how this can be done? I couldn't find that it documented somewhere... Maybe I'm just blind.

  any help is appreciated.

  Thank you very much.

  Oh, OK.  It is not difficult.  I don't have any document or anything, but assuming that you already have your separate groups already set up, here's what you have to do (in ASDM):

  1. Access Configuration--> Device Management--> users / AAA--> user accounts
  2. Select the user name that you want to assign a group policy
  3. Click on 'change '.
  4. In the pop-up window, click VPN policy from the menu on the left
  5. Your first option right must be group policy
  6. Uncheck "Inherit" and assign a group policy
  7. Click on 'OK '.
  8. Click 'apply '.

  Repeat this step for each user name.  That should do it.  I would like to know if that's what you're looking for.

  Please evaluate the useful messages.

• 4 x WAP4410N VLAN for guest network

  Hi there everyone,

  You want to have a problem of my resolved.  I am running 4 x WAP4410N access points configured with one corporate ssid with WPA2 Enterprise authentication that points to a server in network access protection.  What I'm trying to do is to add a second ssid to all my points of access for guests only and cannot connect to the departmental resources/devices.  I think I have to VLAN so that it works correctly.

  Four access points in various parts of the building are connected and are wired in different switches SG300.  A port on a SG300-52 in my server room is plugged into a port on my firewall that I would use for DHCP.

  What should I do to get this working correctly?  At the time of my comments to test network is not even give an IP address to the devices, which I think is related to the VLAN.

  I do not know what ports I leave the identified tag-no, how to configure the VLANs on multiple switches, etc.  Any help would be appreciated.  It was suggested to me that I could use dedicated to guest access separate access points, but I like to keep the amount of access points down to the minimum required.

  I think you may have found the problem. I apologize I have not asked if you were on layer 2. I would have thought it.

  If they all Layer 3, maybe you could just add a few routes? Switching is not my field stronger.

  Personally as needed I just don't sleep 2 and use VLANs

  Eric

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• Adding 1142 points of access to existing wireless network

  Is there that problems with the addition of 1142 points of access to areas that have existing 1242 and 1232 access points?  I have heard and read that the 1142 provide improved thanks to the function «clientlink» performance  The clients that we have are for the most part G, B and, N not much yet.  We have a few localized areas where users report a problem of intermittent coverage and is considering to replace an access point or two in the areas with the 1142.  For all new areas I intend to deploy the 1142 only.

  Thank you

  Al

  No problem at all with the mix don't except that 802. 11 b / g and a customers will decrease the performance of the network. The 1142 s will have their talk with 54 Mbps and 11n clients are also suffering from their presence.

  But nothing too disturbing.

  Nicolas

• Check Point virtual network adapter for SSL Network Extender

  I just downloaded an update recommended for Windows 10. After updating downlaoded, whenever I start my computer it say compatibility assistant this app is not working properly try to reinstall Check Point virtual network adapter for SSL Network Extender. Why do I get this notice? I have no problem getting on the internet. I have a modem and a router that work well with all my devices. I use an ethernet cable, nothing has changed in addition to the recommended update.

  I thought I would try devices and adapters Manager double click Network and looked for updates. Updated and now I don't get notification any longer.

• Password for access TL96 on network

  Hi, when I browse my TV on my LAN IP address I'm invited for a user name and password. What are the default settings?

  Thank you

  Hello

  If this username and default password is required, you should be able to find it in the user manual.
  But I m wondering why go you to the TV during the INVESTIGATION period?

  You can connect the TV to the home network and the support of menu TV Toshiba some options for access to the network. In Media Player, you can find the USB media player and the Player multimedia network. To access the video and picutres you must use the 2nd option (network drive)

• OfficeJet Pro 8500: Officejet Pro 8500 A910 - unable to access configuration for the network folder screen.

  I can't access my webpage "network folder Setup.

  I can access my page main printer very well using the IP of the printer.   I click on Scan up fine, I then click on "configuration of the network folder" and it tries to load and then goes to a screen "ERR_CONNECTION_TIMED_OUT".

  He warned me the first time that he has been using HTTPS and I approved that.  I currently records on my printer set up awhile back and they work fine but must modify and add a little more.

  I tried multiple computers and devices with the same results.

  Thank you

  Chris Gaines

  MALVERN, AR

  Hello @Cgaines78,

  Thanks for dropping by the HP's Support Forums! I see that you run into issues trying to set up a folder network for your HP Officejet 8500 A910.

  Please continue troubleshooting here: scan to a computer, the e-mail, the device memory or the network folder

  This aid? You are now able to set up a network folder?

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  Just say thank you, please click the ' Thumbs Up ' button. If you need more assistance let me know and I will gladly do whatever I can to help.

• The same drive letter may point to different locations for different processes?

  The same drive letter may point to different locations for different processes?

  Our users have the E: drive mapped to one place. But I need a scheduled task in order to use the E: drive to point to a different location at the same time, without affecting the mapping of moose for logged in users.

  There is no work around this need of ours. This is because users are working 24 X 7 update of our data files on the E: drive, and a log file is made. We plan prevent users for a minute every night while move us / save the log file and then allow users of the resume and allow a new log file to create. Then take the saved log file and apply it to a real set of monthly backup of data files, so the backup files will be ready for a recovery after disaster. The program that applies the transactions recorded in the data files is able to apply operations to files that are considered as being in the same exact location.

  I know that's not possible without resorting to the application logs a set of files on a completely different machine. But I ask.

  Thank you

  Dan

  Hello

  The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that helps!

• Update Windows 7 pro (10 users) network January 1, 2013. Now, for more than 4 users connect an access across the network apps stop apparently. Any thoughts?

  Update Windows 7 pro (10 users) network January 1, 2013.

  Now, for more than 4 users connect an access across the network apps stop apparently.

  Any thoughts?

  Hello

  Your question is beyond the scope of these forums. Please ask your question in the following forum.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Concerning

• Rules for access to our network of outside using Telnet service

  What commands are used to prohibit certain external access to our network by using the Telnet service

  It is good to learn that a question has been resolved. Please feel free to discuss any questions you have.

  According to cisco,.

  Why should I rate posts?

  If you see a message that you think deserves to be recognized, please take a moment to write it down.

  You can help yourself and others to quickly identify useful content - as determined by the members. And you will ensure that people who generously share their expertise are recognized correctly. Messages are recommended, the value of these ratings are accumulated as 'points' and summarized in the profile page of the Member and on the preferences of each Member page.

• Not enough external IP for external network access

  Hello

  I am a newcomer to Lab Manager and my Department has not enough IPs to work until several virtual machines on LabManager. If we think about the use of private network as 192.168.x.x address to create a configuration and we checked which is supported using the virtual network model. But the question is whether I would like that all the virtual machines in this network is able to access the external network vLabManager will try once again each of the virtual machines assign an external IP address that we are lack of.

  So my question is the gateway for network in a configuration can be used as a router a provide NAT to allow virtual machines in a network deprived of access to external sites? Or other solutions better to solve our problem of IP all allow the virtual machines to access the external network?

  Thank you.

  The previous reviewer mentioned that NATing is supported (VMware calls this "fence"). If you are exposing ALL the machines in your configuration on their own fenced address, you will not get IP address consumption savings you want. To reduce the number of IP addresses externally exposed in a NAT configuration, you should design your configuration so that only a single IP address is exposed through the fence. A similar debate along these lines took place here: http://communities.vmware.com/message/1245907#1245907

  In a configuration of 4 machine you can put 4 machines on a network "dark." One of these devices will have to be multihomed on two networks. The hosted machine multi risk exposing his unique IP address either on the network or through a closed network directly. In both cases, only a single address would be exposed on your external network and you can use it as a gateway into the 3 other machines.

  Would be nice if the router fence could be directly configured to support some simple flavor of tunneling. Currently this capability is not there.

• Error 1606.Could access location %APPDATA%\ network When uninstalling and installing Java for vista

  I get "Error 1606.Could access location %APPDATA%\ network." "When I try unistalling Java (TM) 6 Update 5 and Java (TM) 6 Update 20 and when I try to download the latest version of java (25) Ive tried a lot to get rid of the problem, but nothing I tried seemed to help."

  Windows Vista 64-bit.

  Have you tried:

  1. http://support.Microsoft.com/kb/2258121
  2. http://support.Microsoft.com/kb/886549
  3. Create a new administrator account and try to install using this account.

• can the WRT54GL router be configured to operate as a point of access/switch?

  The router connected to the internet is a WRP400, and I've got a WRT54GL connected via PLN to improve the signal. I would like to have the WRT54GL work like a switch and point of access, is this possible? The problem is that, in order to have my TV box work, I need the WRP400 to assign IP addresses. Does make sense, and it is possible to make this work?

  Regards, Martin

  This makes sense... for many people... probably at least twice a day in this forum...

  See here for an answer to this FAQ.

  A roaming wireless network set up the two access points with the same SSID and wireless security settings. Choose from different channels, at least 5 pieces, for example 1 & 6.

• WNR2020 - setting up the Web page that appears when you can access the guest network

  Someone knows how to set the Web page that appears when you access the network of comments? I use the WNR2020 router. Thank you very much.

  It can be done by using a different material.

  Above all, you will be able to find this feature in our product business and it's called the HTTP redirect.

  You can check some Points of access such as WAC720, WAC730.