F380 printer with a USB modem / router does not work as a scanner

Similar Questions

• Brand new Dell 2808 router does not work.

  1. the 2808 is not connected to the internet.

  2. when it is received, the 2808 under tension with the disabled DHCP server and port active routing. It is the default setting. Not good to use normal, but worked as advertised. The DHCP server is usually needed in a small switch. I needed an active DHCP service.

  3. I've changed managed and connected fashion. A "saved to restore configuration screen" appeared. Horrible thing. Trashed the router. There is no saved configuration, the 2808 restarts. 2808 completely stopped working after that.

  4. after resetting 2808, the 2808 seemed no longer routing packets, so nothing works now with the exception of the web client, which does not seem to do anything for the networking.

  5 I did activate the DHCP client and configure the IP pool. However, no routed packets, nothing works. Port au port data routing does not work. The DHCP server is not required to allocate IP addresses.

  6. I paid 80 dollars to a so-called "Dell Customer Service" held to solve the problem. They have failed. It turns out that they did not know how to work the 2808.

  7 I have not understood how to contact customer service the Dell directly for the 2808. Not good. I bought a T7810 workstation in 2015 with 5 years of service from Dell, and I don't know how to contact Dell support technical support. I use the 2808 with the T7810. Both should be covered if the customer service could be found.

  8. bottom line, I bought the 2808 on July 27, 2016, and many hours later my effort and more hours of a consultant, I am frustrated trying to run home mode: a router 8-port 1000-baseTpacket with a DHCP Server enabled. I'm about to box 2808 router back to Amazon because it does not work and cannot be implemented.

  Any ideas?

  Thanks in advance to 1 million.

  Keith

  The simplest method to contact support is to enter the serial number on our support site.
  http://Dell.to/20VqlwQ The site will then list the various methods to contact support for this range of products.

  The 2808 PowerConnect doesn't have a console port, so recovery is somewhat limited. If the switch is on firmware version 1.0.0.38 or earlier, then a factory reset can be done by simply changing the transition from managed to not managed and then again. If the switch is on more recent firmware, however, this process does not reset the switch to factory default.

  Being a new switch, it should be under warranty. If the switch is not recoverable, support should be able to get a replacement sent to you.

• USB 3.0 does not work on HP Pavilion 23 g010

  USB 3.0 does not work on HP Pavilion 23 g010. Can not find the driver from HP site that works. Can anyone help please because it is a new computer? Windows 8 is installed, but owner downgraded to Windows 7. I tried the drivers that are supposed to work and the said error box "this computer does not meet the minimum requirements for installing this software"... don't know what to do but would appreciate greatly any input...

  Hello:

  Your model has an AMD chipset and processor.  Therefore, the Intel chipset driver will not work.

  First, install the AMD chipset driver and restart.

  You want to download the 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If that does not install the USB 3.0 drivers (see the file they are included), then download and install both of these drivers and USB 3.0 will work for sure in this way.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If there is any other drivers you need for this model, please let me know.

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• I can't refine edge to work in 2014 of CC.  I select the mask, do the steps required to refine the mask and get a negative icon, a circle with a slash, and it does not work.  I used refine edge before and it has always worked.  This happened on fo

  I can't refine edge to work in 2014 of CC.  I select the mask, do the steps required to refine the mask and get a negative icon, a circle with a slash, and it does not work.  I used refine edge before and it has always worked.  This has happened for a while.  Very frustrating!

  Adobe Creative Cloud to edge CC>

• HTTPS access to the router does not work with Firefox 33.0

  HTTPS access to the router Linksys wrt610n has worked so that Firefox 32.0.3 the dd - wrt software of this router is self-signed certificate with the public key RSA = 512 bits (Yes, it's too short today). From Firefox 33.0 and whose 34, 35, 36-access https does not work. It is desirable to restore https behavior as in Firefox 32.0.3 (with warning and ability to do security exception). Please see the attachment with a https query result in different versions of Firefox.
  Thank you.

  Hello, make suggestions to the https://support.mozilla.org/en-US/questions/1038487 help in your case?

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• Satellite Pro L20-212 - USB 2.0 does not work

  Hello

  I own a * Satellite Pro L20-212 *, * Windows XP (SP2) is installed, but USB2.0 does not work *. I see nothing on USB 2.0 in the Devicemanager and the speed of the USB 2.0 devices attached is at the level of the USB 1.1.

  I don't know what information is needed to help me with this problem as it should normally work on my laptop (and I know that the laptop has USB 2.0 ports).

  What I have to install a special driver to use USB2.0 or is there any software on my laptop that I need to activate?

  Thank you very much
  Frank

  Hello

  Did you install the image on the Toshiba Recovery CD? This image contains the Windows operating system, Toshiba drivers and additional utilities. After installation, everything should work fine, and also the USB ports should work also.

  The USP ports, you can find in Device Manager in the serial BUS controller universal section. Open the tree and check if there is some yellow exclamation points.
  Then try to remove the Device Manager, the controllers and the USB hub and restart the laptop. After restarting again the OS should recognize USB controllers deleted again.

  I hope that this accelerated procedure will help you.

  Greetings

• two face automatic printing both sides of the page, does not work. Why?

  I have a printer with auto print both sides of the page. It does not work. Why?

  Some printers require a separate duplex adapter must be installed in the printer. He might be able, but the part is missing. Additionally, make sure that you use the printer drivers printer manufacturers, not those provided with Windows.

  Is what printer model?

• Virtual router does not work-«the group or resource is not in the appropriate State to make the request in question»

  I installed virtual router manager v1.0 but his does not work. When I leave router virtual by connection to the local network from my laptop, its shows an error. It is «the group or resource is not in the appropriate State to make the request in question» Please give me the solution of this problem. I want to start the virtual router and use the internet connection with other devices.

  I installed virtual router manager v1.0 but his does not work. When I leave router virtual by connection to the local network from my laptop, its shows an error. It is «the group or resource is not in the appropriate State to make the request in question» Please give me the solution of this problem. I want to start the virtual router and use the internet connection with other devices.

  Thank you so much for viewers. Virtual router works properly. I use internet for my laptop for my other devices.

• How to solve my problem with the microphone?-it does not work normally (his jerky) after application of the reductions of noise/restrictions

  Hi il. I recently installed Adobe Audition7.2 on my windows 8.1 and I noticed the button sound recording from the microphone inside the program is disabled while at the same time, I could record using other programs on my windows. I worked with my AU and eliminate the background of an old audio recorded sample. ((mon micro intégré est donc bruyant) noise) I chose a very noisy place and crossed the effect / noise noise reduction of the restrictions/print capture. And then I went through effect / restrictions/noise reduction noise reduction process and apply the settings. Although it works and my sample file has improved (without noise), I encountered another problem, my mic does not work normally both in AU and other windows software. The recorded sound now go offshore and (rough) while recording. How can I solve the problem?

  I also followed the instructions on this link https://forums.adobe.com/thread/1546014?start=0 & tstart = 0 and installed ASIO4ALL... but this isn't work, the program may not work correctly for me.

  
  

  Thank you for your attention.

  If your microphone is sounding restless that you save (rather), there is problem on your Windows sound settings. As Steve G suggested it sounds like a form of blocking to reduce the noise. I don't know if this is an effect that Windows 8.1 can do to the incoming audio signal. If you find a way to turn it off.

• USB 2.0 does not work in bootcamp Windows 10

  Hello

  I try to use my USB 2.0 USB drive on my MBP 13.3 "in bootcamp Windows 10 and it does not appear in windows Explorer. The USB key is displayed in the device however Manager. I tried my hard drive that is USB 3.0 and it works fine, but the USB does not work. I have tried many different solutions and none seem to work including physical relocation and replacing the USB name i.e. H: U:. In disk management, the device is there but says "no media" below.

  Someone at - it suggestions as to how I can get the USB appear in Windows Explorer and access the files?

  Bravo to all the answers in advance.

  the device is considered that the format is not. In some cases shaped on the Mac in Fat32 or ExFat is not readable under Windows. Reformat the Windows Fat32 or ExFat Device Manager device, it will destroy the data and mount the drive. In turn the unit may become unusable which can occur over time.

• With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

  whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

  Get help with microphones on your iPhone, iPad and iPod touch...

• Portege R500 - keyboard USB Legacy support does not work

  I have a Portege R500-124

  I use it to dock in the office and the lid is closed, so I need to enter a password for DriveCrypt and generally control the boot/BIOS from a USB keyboard. But no matter what I set the setting that is inherited from the USB in the BIOS, the USB keyboard does not work. I tried the keyboard connected directly to the R500 when undocked and it's all the same. I also tried BIOS 1.6 and that's all the same.

  USB keys are working and I can boot from them, but no work of measures (for example, F12 to choose the BOOT device) keyboard - the R500 doesn't seem to have the functional USB keyboard support until an operating system (Windows or Linux) has started.

  Any ideas?

  Ian

  > .the R500 does not appear to be the functional USB keyboard support until an operating system (Windows or Linux) has started.

  I can't confirm this, but I'm afraid you're right about that.