Satellite M40 does not seem to charge the battery beyond a certain level

Similar Questions

• Satellite M50 does not supply power to the top

  Hello

  My laptop Satellite M50 does not supply power to the top. The laptop itself is working fine, but I can't use it as the battery is discharged. I checked the cable ca and it seems ok. The laptop has a fuse internal which I need to check? If this is not the case, what should I do?

  Thank you.

  Hello

  If I understand you correctly you cannot use laptop with AC power only. Am I right about that?
  Switching between the block of AC power or the battery, do the power of electronic cards and there is not a switch so that you can check.

  When you connect your laptop to the power Jack is the power LED ON?

• As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will

  As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?

  Hello

  Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.

• I wish I had my day starts at 08:30, 12: 00 no, but that change in the options does not seem to affect the appearance of my calendar, how can I change this?

  I just started to use Windows Calendar.  I wish I had my day starts at 08:30, 12: 00 no, but that change in 'options' does not seem to affect the appearance of my calendar, how can I change this?

  Hello
   
   
  Exactly why you want to change the start time of day?
   
  If the part highlighted changes in the calendar view, which means that the option is selected.
   
  I suggest you to see the link and check if this is useful:
   
  Customize windows Calendar
  http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Calendar
   
  I hope this helps.

• My Windows Update does not seem to recognize the need for updates

  My Windows Update does not seem to recognize the need for updates to the programs... This has happened for a long time. It will only recognize the updates of Microsoft Security Essentials, but when he checks the updates it points only to the basics of security. I don't know there are updates that Microsoft Updates jumps...

  msft777jf,

  Check the 2nd Tuesday of each month - later in the day. (after 10:00 Pacific time)

  06/06 / 1107:38: 16 pm

• I have CS5 which does not seem to handle the FIRST for Sony RX100M3. Don't CS6?

  I use a 10.9.5 OSX computer

  I use photoshop CS5, which does not seem to handle the FIRST for Sony RX100M3. Don't CS6?

  Although photoshop cs5 will not open files Sony RX100M3 camera raw, you can use the adobe dng converter to convert them to dng best, which photoshop cs5 should then open.

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.1.1

  Camera Raw: How to use Adobe DNG Converter - YouTube

  Regarding photoshop cs6, Yes, it will open these files with the 9.1.1 update to the camera raw plugin, but I would consider the plan of creative photography of cloud

  instead of buy photoshop cs6, since adobe very probably won't be updated photoshop cs6 more including the new cameras camera raw plugin.

  http://www.Adobe.com/creativecloud/photography.html?promoid=KTMBM

• Re: CD/DVD drive does not seem to start the DVD in Satellite P750

  My CD/DVD drive does not seem to start DVD, it runs and runs and the only way I can run a DVD (i.e. film) is using Windows Media Center, while the software to install must be enabled in Windows Explorer.

  Anyone?

  Help, please.
  Thank you!

  Have you tried to change AutoPlay settings?
  Open Control Panel and Auto game options. Enable the option Use AutoPlay for all media and devices. Also change other options, especially for DVD movies, software and games.

• My adapter does not work to charge my battery upward.

  My adapter does not have to recharge my battery even though she always. The computer says it works fine, but it's not now recognize. I tried to plug in different places in the House. Blue light works on the adapter, so I know it's on.

  Maybe that adapter is damaged... it happened to me before. Consider making a new adapter. In addition, you can check the contribution of power on your device - may have dirt in there.

• Satellite M40 does not load before the BIOS screen

  When I turn on my Satellite M40 unfortunately it does not happened on 7/8ths blue bar going across the screen.

  That left me completely baffled as what to do.

  Apparently, it could be repaired by removing the cables on my CMOS battery?

  If someone knows how I would go all this? or have any other ideas?

  Thank you xx

  Hi Dec,

  Blue scroll bars indicate that the Wondiows operating system is loaded from the hard drive. If this process hangs while loading, then it is likely that the hard drive itself is defetive or else the files that are being loaded are corrupt and cannot be loaded.

  Interfere with the CMOS chip will not fix this problem because the BIOS has already been loaded at this point.

  If you have access to a bootable CD/DVD (such as Norton Disk Doctor) then I siggest you boot from it and running a scan of your hard drive. Alternatively you can try reinstalling your operating system of the Toshiba recovery CD but it won't replace your own data on your hard drive.

  concerning

• When changing the 80 GB to 40 GB HARD drive, Satellite M40 does not recognize the drive

  Hi all

  Thanks for coming in! :)
  I recently source two-disc 40GB 2.5 "IDE and intended to run one of them in my Satellite M40.

  The problem starts here:

  (1) I took the original 80 GB hard drive & install the 40 GB hard drive
  (2) start and put in the Toshiba M40 recovery disk
  (3) display screen 'Y' for recovery blah blah blah thing...
  (4) then the screen shows 'cannot be installed because no hard drive found ".
  (5) I boot in the BIOS using F2-> F1, page 2 shows no hard drive

  (6) I try to use my own CD of Windows XP Pro, same thing (as in no hard drive found)
  (7) and the BIOS too show no hard drive found

  The two disk 40 GB is out of mobile work and they formatted it, partition deleted with NOTHING on it. They have also been tested on other PCs (using the converter) using WXP. Two of them work very well!

  Now, the weird thing is that I just can't make it work at least in the Sat - M40. Why is this? Toshiba locked the M40 being one Toshiba-disc is usable?
  Is there a place to get through it? Hidden BIOS?

  I have fixed a large number of PCs, but I can't with this, Please HELP...
  Any response would be appreciated, thanks! :)

  Hello

  The M40 should be able to use 40 GB hard drives with no problems.
  But you must use hard drives with the right interface.
  To my knowledge the M40 supports hard drives with an interface IDE (ATA-6).

  So be sure that your 40 GB HARD drive supports it.

  By the way; Check if your HARD drive supports the good master or slave definition.

• Satellite M40 does not detect the battery

  I formatted my laptop and installed xp and I have problem with battery
  The Device Manager shows that without pilot and don t see autonomy and no change when you plug in the power adapter.

  Is there a driver for the batteries? Or if windows detects

  > Is there a driver for the batteries? Or if windows detects
  Are you serious? You need a battery driver?

  Sorry, but buddy I first heard about this driver there is NO driver battery and you don t need these drivers.

  The battery should be detected automatically by the operating system.

  If you want to see the battery in the taskbar, then I recommend that you install the Toshiba Power Saver. The energy saver must switch to the battery during the passage of the AC adapter in and out.

• C50D-A-12R satellite does not power up if the battery connected

  Hello!!!

  I am writing this message cause I was using my laptop and sudenlly it shuts. At first, I didn't know why, I tried to turn it on by pressing the botton, but I failed. Then, I thought I had the battery charger unplugged, but it wasn't. After a few minutes I took the battery and connect the charger, then my laptop run.

  I spend a few hours searching on the Web sites about problems with the battery charger o, and I find that my laptop doesn't recognize the battery cause of pilots o something like this, so I ASK FOR HELP!
  Now, I can only use my laptop if one take out the battery and plug the charger.

  If anyone knows what might happened to my laptop, Please HELP.

  I forgot, my laptop is a Toshiba Satellite C50D-A-12R.

  P.D. sorry my English, I'm from the Spain and several years ago, I finally study English.

  In General, the laptop should work fine in connection with and without the battery.
  The unit should turn on if the battery is removed but connected to the power adapter.

  Also if the battery is connected and worn, the unit should operate without the power adapter connected.
  So what is wrong here? To be honest, I don't think there could be some sort of driver but first of all problems that you should try to recover the laptop to factory settings just to check if the device works by using the preinstalled Toshiba OS and settings.

  If the device does not work properly even after the recovery process, I recommend checking the functionality of the laptop as part of the NEW pile of good work.

  Your device is still covered by the warranty?
  If so, you should communicate with the Toshiba ASP because in case of hardware problems, ASP you should fix free device...

• Satellite M40 does not start

  I have several problems with my Satellite M40-149.
  When to stop crashes on a blue screen.

  Almost impossible to start. After a few shakes and if its my llucky day, it starts, but in most cases crashes to the Toshiba logo "in touch with tomorrow" with the four symbols for hd, cd, floppy and script. I did all the tests, I could find, there is no virus, the hd is ok (I tried several) and after successfully
  start the screen looks ok to me.

  I even tried Linux on another with almost the same results, very difficult to start.
  Is there another test, I could do (except the Toshiba test)?

  Any suggestions on where to find are welcome!
  dimlog

  Hi dimlog.

  This seems a bit strange as a hardware problem. I can t imagine it has something to do with the software, for example. If the computer laptop doesn't boot correctly and freezes on the screen Toshiba (BIOS screen) something wrong with the hardware.

  I m not a technician but maybe the motherboard is the reason for this. But to make sure that it is the cause of the laptop should be checked by a technician of the laptop.

  If you can fix it yourself, also have a look on eBay for second-hand parts they are cheaper as new parts.

  Good luck!

• Pavilion DV7-3162nr: HP Pavilion DV7-3162nr does not turn on and the battery light flashes during charging

  I was upgrading my HP DV7-3162nr for windows 10 when all of a sudden the laptop stopped working and would not turn.

  The power adapter is plugged in and battery led was flashing. Now battery led does not at all depend on. When I press the Start button the laptop would try to start then turn off after about one second. However most of the time when when I press the button nothing happens.

  I took out the battery and tried to immediately start the alternating current, but the laptop is like there is no power. The led near the power connector is on the AC adapter is plugged in. I checked the tension between the adapter and it is correct to about 19 volts, I even loaded to 1.5 Amps and voltage remained close to 19 volts. I tried now on the button for more than one minute with applied power (no battery or AC) and no change when I tried to start with just AC.  The battery is old, but shouldn't the laptop run on just the AC adapter with the battery installed? I do not think that windows 10 has done this, but it's a weird coincidense that he died during the upgrade.

  I read about simular problems with flags of HP but nothing exactly like it.  The fact that I can not turn on the laptop with just the adapter seems to be a problem really bad.

  Anyone has any ideas I can try to let me know

  I was able to fix my laptop.

  I thought that it must be a hardware problem, because the laptop would not run just the adapter. And the adapter was good, as I said, he had the right voltage and can support the load.  So after looking at a lot of U tube videos on how to disassemble laptops and looking for schematics on the laptop which I couldn't find. I disassembled the laptop and a beep on the load circuit and it showing. What I found, it was a bad MosFet at the beginning of the charging circuit. The MosFet P/N P0603BDG has shorted door to the Source.  I was able to get the part of China via Ebay for less than $5.00 total and it took a week to arrive.

  Now, the laptop charging the new battery and works very well. I could have found the bad MosFet faster if I had diagrams. Does anyone know if it is possible to get the schematics for this HP laptop? I found a manual and it helped a bit to disassemble the laptop, but he had nothing on the main map.

  This problem is now solved hope it helps someone out there.

• Cannot install Office97pro after system recovery using windows XP. System does not seem to recognize the drive.

  After system recovery cannot reinstall dvd office97pro. It seems that windows XP does not recognize the program on the disk.  Tested the dvd on my computer laptop windows 7, charges fine. Help!

  Hi Fred Chandler,.

  1. What happens when you insert the DVD in the drive?
  2. You receive an error message?
  3. You are able to use the other DVDs on the computer?
  4. Do you have any third-party DVD burning software installed on the computer?

  If you are facing a similar problem with all DVDs on the computer, refer to the article below and then try the steps mentioned, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you face this problem with the Office 97 DVD then I would suggest that you post your request in the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office/Forum